Countdown stops and how to repeat after a long period

[evermore99]

Dear Andrew, thanks for the great library!

Could you add days into the program or what is the limit to the amount of hours? And how do I make the code repeat after 36:00:00 ?

I’ll like to integrate this in the library. Is such a thing possible?

many thanks for taking your time reading this.

best regards

Bastiaan

[AndrewMascolo]

I haven’t touched this library in years but I’ll see what I can do. - Andrew

…

Sent from my iPhone

On Feb 3, 2021, at 9:50 AM, evermore99 ***@***.***> wrote:  Dear Andrew, thanks for the great library! Could you add days into the program or what is the limit to the amount of hours? And how do I make the code repeat after 36:00:00 ? I’ll like to integrate this in the library. Is such a thing possible? many thanks for taking your time reading this. best regards Bastiaan — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

[evermore99]

Hi Andrew I found about the repeat part and I just added it into my else statement of the timeischanged. I am using my reset button on my teensy as a reset. I’ll try to make a reset button with the reset function with a longpress hold. To see if it makes a difference. Best regards Bastiaan Op wo 3 feb. 2021 om 16:54 schreef AndrewMascolo <notifications@github.com>

…

I haven’t touched this library in years but I’ll see what I can do. - Andrew Sent from my iPhone > On Feb 3, 2021, at 9:50 AM, evermore99 ***@***.***> wrote: > >  > Dear Andrew, thanks for the great library! > > Could you add days into the program or what is the limit to the amount of hours? And how do I make the code repeat after 36:00:00 ? > > I’ll like to integrate this in the library. Is such a thing possible? > > many thanks for taking your time reading this. > > best regards > > Bastiaan > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub, or unsubscribe. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#30 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ARH2AEHKILTMEONTNB5U7H3S5FWU3ANCNFSM4XA7QUNQ> .

[AndrewMascolo]

Hi, it’s definitely possible to add days to this library but that would require a rewrite of the logic. Right now you can only set the timer for about 18 hours as that is the largest value that can be stored in a 32bit unsigned integer. The hours minutes and seconds are all converted into seconds and then decremented. If I were to add days, this would need to be changed, which can also impact precision. Although if you need precision then I would advise getting a Real Time Clock module instead. This way you keep precision and keep the rest of your code running smoothly.

I will play around with the library over the weekend and add in days.

[evermore99]

Hi Andrew, Thanks for pointing that out with the 32bit uint. I have tested the library on 36:00:00 and it does the countdown perfectly. I don’t know however what will happen if the countdown is reaching 36:00:00 hours or before. can you run down the countdown library faster to see if there is a unint overflow? Best regards Bastiaan Op do 4 feb. 2021 om 05:49 schreef AndrewMascolo <notifications@github.com>

…

Hi, it’s definitely possible to add days to this library but that would require a rewrite of the logic. Right now you can only set the timer for about 18 hours as that is the largest value that can be stored in a 32bit unsigned integer. The hours minutes and seconds are all converted into seconds and then decremented. If I were to add days, this would need to be changed, which can also impact precision. Although if you need precision then I would advise getting a Real Time Clock module instead. This way you keep precision and keep the rest of your code running smoothly. I will play around with the library over the weekend and add in days. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#30 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ARH2AEBNQ6OL4WCBBXXL22DS5IRNRANCNFSM4XA7QUNQ> .

[AndrewMascolo]

Added Days

[evermore99]

Cool many thanks! I’ll test it:) thanks for the update:), was it hard? uint overflow problem? Best regards Bastiaan Op zo 7 feb. 2021 om 03:28 schreef AndrewMascolo <notifications@github.com>

…

Added Days — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#30 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ARH2AEFAUHF4J22SCJIWNLTS5X3GJANCNFSM4XA7QUNQ> .

[evermore99]

Ok i get an error saying that: Unsigned int _S = (seconds/60), _M =minutes/60; expected unqualified is before numeric constant And once _M was not declared in this scope I think unsigned int is missing, at the _M, i think I have some conflicts with other libraries because they use the same syntax/macros for _S Best regards Thanks for the help! Bastiaan Op zo 7 feb. 2021 om 08:53 schreef BP <bastiaan.pierik@gmail.com>

…

Cool many thanks! I’ll test it:) thanks for the update:), was it hard? uint overflow problem? Best regards Bastiaan Op zo 7 feb. 2021 om 03:28 schreef AndrewMascolo ***@***.*** > > Added Days > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#30 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/ARH2AEFAUHF4J22SCJIWNLTS5X3GJANCNFSM4XA7QUNQ> > . >

[AndrewMascolo]

You are more than welcome to change the library to suite your needs. - Andrew

…

Sent from my iPhone

On Feb 8, 2021, at 4:07 PM, evermore99 ***@***.***> wrote:  Ok i get an error saying that: Unsigned int _S = (seconds/60), _M =minutes/60; expected unqualified is before numeric constant And once _M was not declared in this scope I think unsigned int is missing, at the _M, i think I have some conflicts with other libraries because they use the same syntax/macros for _S Best regards Thanks for the help! Bastiaan Op zo 7 feb. 2021 om 08:53 schreef BP ***@***.***> > Cool many thanks! > > I’ll test it:) > > thanks for the update:), was it hard? uint overflow problem? > > Best regards > > Bastiaan > > > > Op zo 7 feb. 2021 om 03:28 schreef AndrewMascolo ***@***.*** > > > >> Added Days >> >> — >> You are receiving this because you authored the thread. >> Reply to this email directly, view it on GitHub >> <#30 (comment)>, >> or unsubscribe >> <https://github.com/notifications/unsubscribe-auth/ARH2AEFAUHF4J22SCJIWNLTS5X3GJANCNFSM4XA7QUNQ> >> . >> > — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.