From 433b87b0c98c215824160d1391b10ebbe133bfc7 Mon Sep 17 00:00:00 2001
From: markvantilburg <mark@businessmonitor.nl>
Date: Tue, 20 Jan 2026 17:31:56 +0100
Subject: [PATCH] - Change to newest csproj format - build .net fw 4.8.1 -
 build .net 10

---
 DnsExample/AssemblyInfo.cs   |  59 ---------------
 DnsExample/DnsExample.csproj | 139 +++--------------------------------
 2 files changed, 10 insertions(+), 188 deletions(-)
 delete mode 100644 DnsExample/AssemblyInfo.cs

diff --git a/DnsExample/AssemblyInfo.cs b/DnsExample/AssemblyInfo.cs
deleted file mode 100644
index 1ab558d..0000000
--- a/DnsExample/AssemblyInfo.cs
+++ /dev/null
@@ -1,59 +0,0 @@
-using System.Reflection;
-
-//
-// General Information about an assembly is controlled through the following 
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-//
-
-[assembly: AssemblyTitle("")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("")]
-[assembly: AssemblyProduct("")]
-[assembly: AssemblyCopyright("")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-//
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version 
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Revision and Build Numbers 
-// by using the '*' as shown below:
-
-[assembly: AssemblyVersion("1.0.*")]
-
-//
-// In order to sign your assembly you must specify a key to use. Refer to the 
-// Microsoft .NET Framework documentation for more information on assembly signing.
-//
-// Use the attributes below to control which key is used for signing. 
-//
-// Notes: 
-//   (*) If no key is specified, the assembly is not signed.
-//   (*) KeyName refers to a key that has been installed in the Crypto Service
-//       Provider (CSP) on your machine. KeyFile refers to a file which contains
-//       a key.
-//   (*) If the KeyFile and the KeyName values are both specified, the 
-//       following processing occurs:
-//       (1) If the KeyName can be found in the CSP, that key is used.
-//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
-//           in the KeyFile is installed into the CSP and used.
-//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
-//       When specifying the KeyFile, the location of the KeyFile should be
-//       relative to the project output directory which is
-//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
-//       located in the project directory, you would specify the AssemblyKeyFile 
-//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
-//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
-//       documentation for more information on this.
-//
-
-[assembly: AssemblyDelaySign(false)]
-[assembly: AssemblyKeyFile("")]
-[assembly: AssemblyKeyName("")]
\ No newline at end of file
diff --git a/DnsExample/DnsExample.csproj b/DnsExample/DnsExample.csproj
index 73691b0..7ce87b0 100644
--- a/DnsExample/DnsExample.csproj
+++ b/DnsExample/DnsExample.csproj
@@ -1,139 +1,20 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="12.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003" DefaultTargets="Build">
+<Project Sdk="Microsoft.NET.Sdk">
+
   <PropertyGroup>
-    <ProjectType>Local</ProjectType>
-    <ProductVersion>7.10.3077</ProductVersion>
-    <SchemaVersion>2.0</SchemaVersion>
-    <ProjectGuid>{2D7481E0-6E80-4C2C-B8D2-92500741F791}</ProjectGuid>
-    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
-    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
-    <ApplicationIcon />
-    <AssemblyKeyContainerName />
-    <AssemblyName>DnsExample</AssemblyName>
-    <AssemblyOriginatorKeyFile />
-    <DefaultClientScript>JScript</DefaultClientScript>
-    <DefaultHTMLPageLayout>Grid</DefaultHTMLPageLayout>
-    <DefaultTargetSchema>IE50</DefaultTargetSchema>
-    <DelaySign>false</DelaySign>
+    <TargetFrameworks>net481;net10.0</TargetFrameworks>
     <OutputType>Exe</OutputType>
     <RootNamespace>DnsExample</RootNamespace>
-    <RunPostBuildEvent>OnBuildSuccess</RunPostBuildEvent>
-    <StartupObject />
-    <FileUpgradeFlags>
-    </FileUpgradeFlags>
-    <TargetFrameworkVersion>v4.7.2</TargetFrameworkVersion>
-    <UpgradeBackupLocation>
-    </UpgradeBackupLocation>
-    <OldToolsVersion>0.0</OldToolsVersion>
-    <TargetFrameworkProfile />
-    <PublishUrl>publish\</PublishUrl>
-    <Install>true</Install>
-    <InstallFrom>Disk</InstallFrom>
-    <UpdateEnabled>false</UpdateEnabled>
-    <UpdateMode>Foreground</UpdateMode>
-    <UpdateInterval>7</UpdateInterval>
-    <UpdateIntervalUnits>Days</UpdateIntervalUnits>
-    <UpdatePeriodically>false</UpdatePeriodically>
-    <UpdateRequired>false</UpdateRequired>
-    <MapFileExtensions>true</MapFileExtensions>
-    <ApplicationRevision>0</ApplicationRevision>
-    <ApplicationVersion>1.0.0.%2a</ApplicationVersion>
-    <IsWebBootstrapper>false</IsWebBootstrapper>
-    <UseApplicationTrust>false</UseApplicationTrust>
-    <BootstrapperEnabled>true</BootstrapperEnabled>
-    <SccProjectName>
-    </SccProjectName>
-    <SccLocalPath>
-    </SccLocalPath>
-    <SccAuxPath>
-    </SccAuxPath>
-    <SccProvider>
-    </SccProvider>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
-    <OutputPath>bin\Debug\</OutputPath>
-    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
-    <BaseAddress>285212672</BaseAddress>
-    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
-    <ConfigurationOverrideFile />
-    <DefineConstants>DEBUG;TRACE</DefineConstants>
-    <DocumentationFile />
-    <DebugSymbols>true</DebugSymbols>
-    <FileAlignment>4096</FileAlignment>
-    <NoStdLib>false</NoStdLib>
-    <NoWarn />
-    <Optimize>false</Optimize>
-    <RegisterForComInterop>false</RegisterForComInterop>
-    <RemoveIntegerChecks>false</RemoveIntegerChecks>
-    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
-    <WarningLevel>4</WarningLevel>
-    <DebugType>full</DebugType>
-    <ErrorReport>prompt</ErrorReport>
-    <Prefer32Bit>false</Prefer32Bit>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
-    <OutputPath>bin\Release\</OutputPath>
-    <AllowUnsafeBlocks>false</AllowUnsafeBlocks>
-    <BaseAddress>285212672</BaseAddress>
-    <CheckForOverflowUnderflow>false</CheckForOverflowUnderflow>
-    <ConfigurationOverrideFile />
-    <DefineConstants>TRACE</DefineConstants>
-    <DocumentationFile />
-    <DebugSymbols>false</DebugSymbols>
-    <FileAlignment>4096</FileAlignment>
-    <NoStdLib>false</NoStdLib>
-    <NoWarn />
-    <Optimize>true</Optimize>
-    <RegisterForComInterop>false</RegisterForComInterop>
-    <RemoveIntegerChecks>false</RemoveIntegerChecks>
-    <TreatWarningsAsErrors>false</TreatWarningsAsErrors>
-    <WarningLevel>4</WarningLevel>
-    <DebugType>none</DebugType>
-    <ErrorReport>prompt</ErrorReport>
-    <Prefer32Bit>false</Prefer32Bit>
+    <AssemblyName>DnsExample</AssemblyName>
+    <ImplicitUsings>disable</ImplicitUsings>
+    <Nullable>disable</Nullable>
   </PropertyGroup>
+
   <ItemGroup>
-    <ProjectReference Include="..\Bdev.Net.Dns\Bdev.Net.Dns.csproj">
-      <Name>Bdev.Net.Dns</Name>
-      <Project>{6D765924-73E9-49AE-8A97-DA24958A540C}</Project>
-      <Package>{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}</Package>
-    </ProjectReference>
-    <Reference Include="System">
-      <Name>System</Name>
-    </Reference>
-    <Reference Include="System.Data">
-      <Name>System.Data</Name>
-    </Reference>
-    <Reference Include="System.Xml">
-      <Name>System.XML</Name>
-    </Reference>
-  </ItemGroup>
-  <ItemGroup>
-    <Compile Include="AssemblyInfo.cs">
-      <SubType>Code</SubType>
-    </Compile>
-    <Compile Include="DnsTestApp.cs">
-      <SubType>Code</SubType>
-    </Compile>
+    <ProjectReference Include="..\Bdev.Net.Dns\Bdev.Net.Dns.csproj" />
   </ItemGroup>
+
   <ItemGroup>
     <None Include="app.config" />
   </ItemGroup>
-  <ItemGroup>
-    <BootstrapperPackage Include="Microsoft.Net.Client.3.5">
-      <Visible>False</Visible>
-      <ProductName>.NET Framework 3.5 SP1 Client Profile</ProductName>
-      <Install>false</Install>
-    </BootstrapperPackage>
-    <BootstrapperPackage Include="Microsoft.Net.Framework.3.5.SP1">
-      <Visible>False</Visible>
-      <ProductName>.NET Framework 3.5 SP1</ProductName>
-      <Install>true</Install>
-    </BootstrapperPackage>
-  </ItemGroup>
-  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
-  <PropertyGroup>
-    <PreBuildEvent />
-    <PostBuildEvent />
-  </PropertyGroup>
+
 </Project>
\ No newline at end of file