Need Help With Code!PLZ!

[Joshkuebler]

Hey Jaffe, sorry to bother you, ive got the boards all put together, hardware and all, minus the coin cell battery(need to run to store). But i am a relative noob when it comes to compiling code. I have atmel studio installed. I see that on github there are many file/folders for all the various functions. Can you explain to me how to build code and load onto chip. I have an ftdi usb to serial will that work also i have an arduino uno if i can use that to program. Please any help would be greatly appreciated, i am so close to finishing this beautiful build. Ive dreamed of putting together an nes synth for so long! you can email me josh_kuebler@yahoodotcom

[Jaffe-]

Hi again Josh. I've attached the latest NESizer firmware code (built from github). To build this on Windows, I first installed git for Windows and cloned the repository. Then, using the git bash shell I ran 'make' from the cloned repository. That should work out of the box if you have avr-gcc installed. Regards, Johan lør. 22. feb. 2020 kl. 07:09 skrev Joshkuebler <notifications@github.com>:

…

Hey Jaffe, sorry to bother you, ive got the boards all put together, hardware and all, minus the coin cell battery(need to run to store). But i am a relative noob when it comes to compiling code. I have atmel studio installed. I see that on github there are many file/folders for all the various functions. Can you explain to me how to build code and load onto chip. I have an ftdi usb to serial will that work also i have an arduino uno if i can use that to program. Please any help would be greatly appreciated, i am so close to finishing this beautiful build. Ive dreamed of putting together an nes synth for so long! you can email me ***@***.*** — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <https://github.com/Jaffe-/NESizer2/issues/4?email_source=notifications&email_token=ABAVF4364OYP7O25RULZIY3REC6QJA5CNFSM4KZO4ELKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4IPOVC7Q>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABAVF45TUAPAOOJ5FPFPD2TREC6QJANCNFSM4KZO4ELA> .

[Joshkuebler]

Johan you are a stand up guy. Thanks a million. I will be sure to send video once I get it all sorted. Have a great week!-Joshua Kuebler  Sent from Yahoo Mail on Android On Sun, Feb 23, 2020 at 9:22 AM, Johan Fjeldtvedt<notifications@github.com> wrote: Hi again Josh. I've attached the latest NESizer firmware code (built from github). To build this on Windows, I first installed git for Windows and cloned the repository. Then, using the git bash shell I ran 'make' from the cloned repository. That should work out of the box if you have avr-gcc installed. Regards, Johan lør. 22. feb. 2020 kl. 07:09 skrev Joshkuebler <notifications@github.com>:

Hey Jaffe, sorry to bother you, ive got the boards all put together, hardware and all, minus the coin cell battery(need to run to store). But i am a relative noob when it comes to compiling code. I have atmel studio installed. I see that on github there are many file/folders for all the various functions. Can you explain to me how to build code and load onto chip. I have an ftdi usb to serial will that work also i have an arduino uno if i can use that to program. Please any help would be greatly appreciated, i am so close to finishing this beautiful build. Ive dreamed of putting together an nes synth for so long! you can email me ***@***.*** — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <https://github.com/Jaffe-/NESizer2/issues/4?email_source=notifications&email_token=ABAVF4364OYP7O25RULZIY3REC6QJA5CNFSM4KZO4ELKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4IPOVC7Q>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABAVF45TUAPAOOJ5FPFPD2TREC6QJANCNFSM4KZO4ELA> .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.