WAITING/WAITING ACTIVE ON WALLBOX

[Vitek-1977]

There are two "Waiting" states, integration shows only "waiting" altough in the UI there is "Waiting active on wallbox" which emerges after the car is charged up to desired vehicle settings and the vehicle shuts down the charging.

[{"deviceType":"1","common":{"priority":2,"id":1,"name":"Bojler","status":4,"signal":-36,"type":1,"sn":"N/A","fw":"002.000.000.0418","hw":210},"power":{"output":[0,0,0],"boost":0,"boostSource":0,"totalPower":0,"maxPower":2200,"boostTempOverride":0,"temperature":61,"connectedPhase":[1,1,1],"outletMode":0},"settings":[{"power":{"allowed_solar_heating_time":{"start":480,"stop":1260,"enabled":1},"max":2200,"target":100000,"targetTemperature":66,"targetTemperatureBoost":20,"offline_only":0,"ignore_cycle":0,"block_solar_heating":0,"block_heating_from_battery":0},"boost":{"mode":0,"windows":[{"enabled":1,"start":1080,"stop":1260},{"enabled":1,"start":1080,"stop":1260},{"enabled":1,"start":1080,"stop":1260}]}},{"power":{"allowed_solar_heating_time":{"start":480,"stop":1260,"enabled":1},"max":2200,"target":10,"targetTemperature":60,"targetTemperatureBoost":60,"offline_only":0,"ignore_cycle":0,"block_solar_heating":0,"block_heating_from_battery":0},"boost":{"mode":0,"windows":[{"enabled":1,"start":1080,"stop":1260},{"enabled":1,"start":1080,"stop":1260},{"enabled":1,"start":1080,"stop":1260}]}}]},{"deviceType":"4","common":{"priority":1,"id":24,"name":"Wallbox","status":1,"signal":-68,"type":4,"sn":"N/A","fw":"002.001.000.0306","hw":200},"charge":{"status":1,"state":64,"current":[0,0,0],"temperature":0,"boost":0,"boostSource":0,"circuitBreaker":16,"triggerPhase":2,"totalPower":0},"settings":[{"charge":{"allowed_solar_charging_time":{"start":60,"stop":300,"enabled":0},"block_charging":0,"block_solar_charging":0,"block_charging_from_battery":0,"offline_only":0,"ignore_cycle":0,"mode":[{"id":0,"enabled":1,"power":1400,"triggerOnPower":2600,"triggerOffPower":-500,"triggerOnDuration":60,"triggerOffDuration":120},{"id":1,"enabled":1,"power":3700},{"id":2,"enabled":1,"power":3700,"windows":[{"enabled":1,"start":0,"stop":300},{"enabled":0,"start":960,"stop":1260},{"enabled":0,"start":1080,"stop":1260}]},{"id":3,"enabled":0,"power":1400}]}},{"charge":{"allowed_solar_charging_time":{"start":480,"stop":1260,"enabled":1},"block_charging":0,"block_solar_charging":0,"block_charging_from_battery":0,"offline_only":0,"ignore_cycle":0,"mode":[{"id":0,"enabled":1,"power":1400,"triggerOnPower":2500,"triggerOffPower":2000,"triggerOnDuration":60,"triggerOffDuration":60},{"id":1,"enabled":1,"power":1400},{"id":2,"enabled":0,"power":1400,"windows":[{"enabled":1,"start":1080,"stop":1260},{"enabled":1,"start":1080,"stop":1260},{"enabled":1,"start":1080,"stop":1260}]},{"id":3,"enabled":0,"power":1400}]}}]}]

[Jenik5]

I have a wallbox, but I don't have an EV yet, so I can't verify everything in practice.
I'll probably need some help with the solution.
I think I know where the wind is blowing from.
In the "Charge" section, there are two parameters in JSON:
Status and State.
In JavaScript, I managed to find the section of constants and their strings:
deviceStatusString: ["unpaired", "online", "offline", "error", "active"],
deviceTypeString: ["generic", "power", "hdo", "fire", "charger", "inverter"],
deviceBoostModeString: ["manual", "hdo", "window", "window+hdo"],
HDO_StatusString: ["off", "on"],
modeString: ["summer", "winter"],
systemStatusString: ["online", "offline", "updating"],
phaseStatusString: ["connected", "disconnected"],
chargeStatusString: ["disconnected", "waiting", "charging", "overheated", "error", "unavailable"],
chargeModeString: ["solar", "manual", "time", "hdo"],
deviceTestResultString: ["none", "in progress", "pass", "fail", "timeout"],
From this, I deduced that "status" would probably be chargeStatusString, and I display the statuses accordingly.
However, I don't know what to display based on "state."
To be on the safe side, I also left the numerical representations there.
So if you could track down what text representation to assign to each "status" and summarize it in a table, I'd be happy to add it to the integration. Such an adjustment is very simple.

[Vitek-1977]

Yeah, no prob, will observe, there is also "State" on the very beginning of the string telling:
name":"Wallbox","status":1,"

And then there is:
charge":{"status":1,"state":64,

I guess we will be looking for all three "statuses/states" right?

[Vitek-1977]

UI: Waiting
API:
Status: 4
Charge: status: 1 state: 0

[Jenik5]

The first "status" is in JSON section "common". Its meaning is deviceStatus and is represented by these constants: deviceStatusString: ["unpaired", "online", "offline", "error", "active"].
So we are only interested in the section "charge"
"charge":{"status":1,"state":64,"current":[0,0,0],"temperature":0,"boost":0,"boostSource":0,"circuitBreaker":16,"triggerPhase":2,"totalPower":0}
I believe that "status" is represented by these constants: chargeStatusString: ["disconnected", "waiting", "charging", "overheated", "error", "unavailable"].
So, only the "state" with value 64 remains.
I don't believe there are 64 different statuses. It could be that the first digit has some meaning, and the second digit has some meaning. But the only way to find it is to watch it and make a table with the meaning of different numbers.

[Vitek-1977]

No prob, will observe and report.