Extruder Motor Compatibility for 0.9° Angle #25
Description
In BOM :
| MOTOREXTRUDE | Nema 14 Round | Extruder Motor | 1 | https://amzn.to/3NmFV35 | 20.99 | https://www.aliexpress.com/item/1005002509418988.html?spm=a2g0o.productlist.0.0.6af666304sAbHw&algo_pvid=d3ac8139-a8d2-4acd-a2f2-f124155008ed&algo_exp_id=d3ac8139-a8d2-4acd-a2f2-f124155008ed-2&pdp_ext_f=%7B%22sku_id%22%3A%2212000020943630648%22%7D&pdp_npi=2%40dis%21USD%21%2118.45%21%21%215.69%21%21%40210318b916529922497668199efded%2112000020943630648%21sea | 16.89 | 16.89 | FYSETC 3D Printer Parts 36mm Motor Extruder Stepper Motor 1.8 Angle 0.5A |
|---|
MOTOREXTRUDE
Nema 14 Round Extruder Motor 1
Two Marketplace links available.
Amazon.com costs : 20.99 USD
Aliexpress.com costs : 16.89 USD
Description : FYSETC 3D Printer Parts 36mm Motor Extruder Stepper Motor 1.8 Angle 0.5A
Well, I have found similar one from stepperonline.com - Round Nema 14 Bipolar 0.9deg 7Ncm (9.91oz.in) 0.5A 8.5V 36x12mm 4 Wires(https://www.omc-stepperonline.com/round-nema-14-bipolar-0-9deg-7ncm-9-91oz-in-0-5a-8-5v-36x12mm-4-wires-14hr05-0504s). However, Clearly this one is 0.9 degree Angle unlike the recommended 1.8° Angle from FYSETC- So, Just wanted to confirm if this 0.9° Angle one from stepperonline will be compatible with the setup with any workaround or the 1.8° Angle one from FYSETC must be used?