System crash during initial scale calibration

[taylor1021]

Filaman Version: 2.0.10

After assembling the unit and flashing the software, Filaman crashes and reboots during the initial scale calibrate. The screen just says to "TARE Scale", and no amount trying to tare it (either via the connected capacitive button or the web interface) moves it to the next step. I've tried reinstalling Filaman, but the same behavior and error occur.

This is what's displayed in the logs:

[19:39:01]++++++++++++++++++++++++++++++
[19:39:01]Scale Loop started
[19:39:01]++++++++++++++++++++++++++++++
[19:39:01]Re-Tare scale
[19:39:11]
[19:39:11]abort() was called at PC 0x4011d8ec on core 0
[19:39:11]
[19:39:11]
[19:39:11]Backtrace: 0x40083c55:0x3ffbef5c |<-CORRUPTED
[19:39:11]
[19:39:11]
[19:39:11]
[19:39:11]
[19:39:11]ELF file SHA256: 00e1a9bbefd2861a
[19:39:11]
[19:39:11]Rebooting...
[19:39:11]ets Jul 29 2019 12:21:46
[19:39:11]
[19:39:11]rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
[19:39:11]configsip: 0, SPIWP:0xee
[19:39:11]clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
[19:39:11]mode:DIO, clock div:2
[19:39:11]load:0x3fff0030,len:1184
[19:39:11]load:0x40078000,len:13232
[19:39:11]load:0x40080400,len:3028
[19:39:11]entry 0x400805e4
[19:39:12]E (657) esp_core_dump_flash: No core dump�  ѥѥ   found!
[19:39:12]E (657) esp_core_dump_flash: No core dump partition found!
[19:39:12]ESP32 Chip ID = F440CB3C1C78
[19:39:12]LittleFS Total: 196608 bytes
[19:39:12]LittleFS Used: 159744 bytes
[19:39:12]LittleFS Free: 36864 bytes

[ManuelW77]

Double check the wiring of your scale.