Wait for AMS-Data...

[Osi1904]

Hi, wie darum gebeten hier ein Issue.

Was die Filamente angeht so habe ich nur Generische, ich habe leider kein Bambulab Filament das ich von Haus aus mit NFC testen könnte...

Ich habe folgendes Setup:
Bambulab H2C - Firmware 01.01.02.00 (Latest)
2 x AMS 2 Pro
1x AMS HT
Filaman Version 2.0.10
Spoolman Version 0.23.1

MQTT
Topic: device/31B8BP512345678/report

Value
{
"print": {
"2D": {
"bs": {
"bi": [],
"total_time": 0
},
"cond": 15,
"cur_stage": {
"clock_in_time": 0,
"idx": 0,
"left_time": 0,
"process": 0,
"state": 0
},
"first_confirm": false,
"makeable": false,
"material": {
"cur_id_list": [],
"state": 0,
"tar_id": "",
"tar_name": ""
},
"pm": 0
},
"3D": {
"layer_num": 0,
"print_cali_option": 0,
"total_layer_num": 0
},
"ams": {
"ams": [
{
"dry_time": 0,
"humidity": "4",
"humidity_raw": "25",
"id": "0",
"info": "2003",
"temp": "22.6",
"tray": [
{
"bed_temp": "0",
"bed_temp_type": "0",
"cali_idx": -1,
"cols": [
"FFF144FF"
],
"ctype": 0,
"drying_temp": "0",
"drying_time": "0",
"id": "0",
"nozzle_temp_max": "240",
"nozzle_temp_min": "190",
"remain": -1,
"state": 11,
"tag_uid": "0000000000000000",
"total_len": 330000,
"tray_color": "FFF144FF",
"tray_diameter": "1.75",
"tray_id_name": "",
"tray_info_idx": "GFL99",
"tray_sub_brands": "",
"tray_type": "PLA",
"tray_uuid": "00000000000000000000000000000000",
"tray_weight": "0",
"xcam_info": "000000000000000000000000"
},
{
"bed_temp": "0",
"bed_temp_type": "0",
"cali_idx": -1,
"cols": [
"0ACC38FF"
],
"ctype": 0,
"drying_temp": "0",
"drying_time": "0",
"id": "1",
"nozzle_temp_max": "240",
"nozzle_temp_min": "190",
"remain": -1,
"state": 11,
"tag_uid": "0000000000000000",
"total_len": 330000,
"tray_color": "0ACC38FF",
"tray_diameter": "1.75",
"tray_id_name": "",
"tray_info_idx": "GFL99",
"tray_sub_brands": "",
"tray_type": "PLA",
"tray_uuid": "00000000000000000000000000000000",
"tray_weight": "0",
"xcam_info": "000000000000000000000000"
},
{
"bed_temp": "0",
"bed_temp_type": "0",
"cali_idx": -1,
"cols": [
"DCDCDCFF"
],
"ctype": 0,
"drying_temp": "0",
"drying_time": "0",
"id": "2",
"nozzle_temp_max": "240",
"nozzle_temp_min": "190",
"remain": -1,
"state": 11,
"tag_uid": "0000000000000000",
"total_len": 330000,
"tray_color": "DCDCDCFF",
"tray_diameter": "1.75",
"tray_id_name": "",
"tray_info_idx": "GFL99",
"tray_sub_brands": "",
"tray_type": "PLA",
"tray_uuid": "00000000000000000000000000000000",
"tray_weight": "0",
"xcam_info": "000000000000000000000000"
},
{
"bed_temp": "0",
"bed_temp_type": "0",
"cali_idx": -1,
"cols": [
"0D6284FF"
],
"ctype": 0,
"drying_temp": "0",
"drying_time": "0",
"id": "3",
"nozzle_temp_max": "240",
"nozzle_temp_min": "190",
"remain": -1,
"state": 11,
"tag_uid": "0000000000000000",
"total_len": 330000,
"tray_color": "0D6284FF",
"tray_diameter": "1.75",
"tray_id_name": "",
"tray_info_idx": "GFL96",
"tray_sub_brands": "",
"tray_type": "PLA",
"tray_uuid": "00000000000000000000000000000000",
"tray_weight": "0",
"xcam_info": "000000000000000000000000"
}
]
},
{
"dry_time": 0,
"humidity": "5",
"humidity_raw": "20",
"id": "1",
"info": "2003",
"temp": "22.6",
"tray": [
{
"bed_temp": "0",
"bed_temp_type": "0",
"cali_idx": -1,
"cols": [
"161616FF"
],
"ctype": 0,
"drying_temp": "0",
"drying_time": "0",
"id": "0",
"nozzle_temp_max": "240",
"nozzle_temp_min": "190",
"remain": -1,
"state": 11,
"tag_uid": "0000000000000000",
"total_len": 330000,
"tray_color": "161616FF",
"tray_diameter": "1.75",
"tray_id_name": "",
"tray_info_idx": "GFL99",
"tray_sub_brands": "",
"tray_type": "PLA",
"tray_uuid": "00000000000000000000000000000000",
"tray_weight": "0",
"xcam_info": "000000000000000000000000"
},
{
"bed_temp": "0",
"bed_temp_type": "0",
"cali_idx": -1,
"cols": [
"0ACC38FF"
],
"ctype": 0,
"drying_temp": "0",
"drying_time": "0",
"id": "1",
"nozzle_temp_max": "240",
"nozzle_temp_min": "190",
"remain": -1,
"state": 11,
"tag_uid": "0000000000000000",
"total_len": 330000,
"tray_color": "0ACC38FF",
"tray_diameter": "1.75",
"tray_id_name": "",
"tray_info_idx": "GFL96",
"tray_sub_brands": "",
"tray_type": "PLA",
"tray_uuid": "00000000000000000000000000000000",
"tray_weight": "0",
"xcam_info": "000000000000000000000000"
},
{
"bed_temp": "0",
"bed_temp_type": "0",
"cali_idx": -1,
"cols": [
"76763AFF"
],
"ctype": 0,
"drying_temp": "0",
"drying_time": "0",
"id": "2",
"nozzle_temp_max": "240",
"nozzle_temp_min": "190",
"remain": -1,
"state": 11,
"tag_uid": "0000000000000000",
"total_len": 330000,
"tray_color": "76763AFF",
"tray_diameter": "1.75",
"tray_id_name": "",
"tray_info_idx": "GFL99",
"tray_sub_brands": "",
"tray_type": "PLA",
"tray_uuid": "00000000000000000000000000000000",
"tray_weight": "0",
"xcam_info": "000000000000000000000000"
},
{
"bed_temp": "0",
"bed_temp_type": "0",
"cali_idx": -1,
"cols": [
"354B4FFF"
],
"ctype": 0,
"drying_temp": "0",
"drying_time": "0",
"id": "3",
"nozzle_temp_max": "240",
"nozzle_temp_min": "190",
"remain": -1,
"state": 11,
"tag_uid": "0000000000000000",
"total_len": 330000,
"tray_color": "354B4FFF",
"tray_diameter": "1.75",
"tray_id_name": "",
"tray_info_idx": "GFL99",
"tray_sub_brands": "",
"tray_type": "PLA",
"tray_uuid": "00000000000000000000000000000000",
"tray_weight": "0",
"xcam_info": "000000000000000000000000"
}
]
},
{
"dry_time": 0,
"humidity": "0",
"humidity_raw": "23",
"id": "128",
"info": "2104",
"temp": "21.7",
"tray": [
{
"bed_temp": "0",
"bed_temp_type": "0",
"cali_idx": -1,
"cols": [
"0ACC38FF"
],
"ctype": 0,
"drying_temp": "0",
"drying_time": "0",
"id": "0",
"nozzle_temp_max": "270",
"nozzle_temp_min": "220",
"remain": -1,
"state": 11,
"tag_uid": "0000000000000000",
"total_len": 330000,
"tray_color": "0ACC38FF",
"tray_diameter": "1.75",
"tray_id_name": "",
"tray_info_idx": "GFG99",
"tray_sub_brands": "",
"tray_type": "PETG",
"tray_uuid": "00000000000000000000000000000000",
"tray_weight": "0",
"xcam_info": "000000000000000000000000"
}
]
}
],
"ams_exist_bits": "13",
"ams_exist_bits_raw": "13",
"cali_id": 255,
"cali_stat": 0,
"insert_flag": true,
"power_on_flag": true,
"tray_exist_bits": "100ff",
"tray_is_bbl_bits": "100ff",
"tray_now": "255",
"tray_pre": "255",
"tray_read_done_bits": "100ff",
"tray_reading_bits": "0",
"tray_tar": "255",
"unbind_ams_stat": 0,
"version": 148
},
"ams_rfid_status": 0,
"ams_status": 0,
"ap_err": 0,
"aux": "2001004",
"aux_part_fan": false,
"batch_id": 0,
"bed_target_temper": 0.0,
"bed_temper": 21.0,
"big_fan1_speed": "0",
"big_fan2_speed": "0",
"cali_version": 0,
"canvas_id": 0,
"care": [
{
"id": "ls",
"info": "1A00"
},
{
"id": "ld",
"info": "641864"
},
{
"id": "lr",
"info": "1A00"
},
{
"id": "hr",
"info": "621862"
}
],
"cfg": "785FDA9B",
"command": "push_status",
"cooling_fan_speed": "0",
"design_id": "",
"device": {
"airduct": {
"modeCur": 0,
"modeFunc": 0,
"modeList": [
{
"ctrl": [
16,
32,
48
],
"modeId": 0,
"off": [
96
]
},
{
"ctrl": [
16
],
"modeId": 1,
"off": [
32,
48
]
},
{
"ctrl": [
48
],
"modeId": 2,
"off": []
}
],
"modeVisable": 7,
"parts": [
{
"func": 0,
"id": 16,
"range": 6553600,
"state": 0,
"tar_state": 0
},
{
"func": 1,
"id": 32,
"range": 6553600,
"state": 0,
"tar_state": 0
},
{
"func": 2,
"id": 48,
"range": 6553600,
"state": 0,
"tar_state": 0
},
{
"func": 4,
"id": 96,
"range": 6553600,
"state": 0,
"tar_state": 0
}
],
"subFunc": 0,
"subMode": 0,
"subVisable": 7,
"version": 1
},
"bed": {
"info": {
"temp": 21
},
"state": 0
},
"bed_temp": 21,
"cam": {
"laser": {
"cond": 253,
"state": 0
},
"timelapse_path": ""
},
"ctc": {
"info": {
"temp": 21
},
"state": 0
},
"ext_tool": {
"calib": 2,
"low_prec": true,
"mount": 0,
"mount_3d": 1,
"th_temp": 0,
"type": "F000"
},
"extruder": {
"info": [
{
"filam_bak": [],
"hnow": 0,
"hpre": 0,
"htar": 0,
"id": 0,
"info": 1545,
"snow": 65535,
"spre": 65535,
"star": 65535,
"stat": 0,
"temp": 26
},
{
"filam_bak": [],
"hnow": 1,
"hpre": 1,
"htar": 1,
"id": 1,
"info": 1048,
"snow": 65279,
"spre": 65279,
"star": 65279,
"stat": 0,
"temp": 19
}
],
"state": 2
},
"fan": 0,
"fire_ext": {
"bot_err": 0,
"cd": 0,
"cd_init": 15,
"connect_flag": 0,
"drill_flag": 0,
"history": [],
"remain_time": 0,
"rm_init": 33,
"state": 0
},
"holder": {
"info": 1,
"job": 0,
"pos": 2,
"stat": 0,
"step": [
0
]
},
"laser": {
"power": 0
},
"nozzle": {
"exist": 3866627,
"info": [
{
"color_m": "0D6284FF",
"diameter": 0.4,
"fila_id": "GFL96",
"id": 19,
"sn": "20D06A5A1609524",
"stat": 0,
"tm": 350,
"type": "HS01",
"wear": 0.0
},
{
"color_m": "00000000",
"diameter": 0.4,
"fila_id": "",
"id": 1,
"sn": "N/A",
"stat": 0,
"tm": 0,
"type": "HS01",
"wear": 0.0
},
{
"color_m": "0ACC38FF",

[ManuelW77]

Könnt ihr mal die Beta testen. In der Drucker Konfiguration kann man jetzt seinen Drucker-Typ auswählen, damit wird die API angepasst.

Firmware-Beta
Website-Beta

[Osi1904]

Vielen Dank schonmal, jedoch Situation leider unverändert.
Zum testen habe ich auch mal den LAN only Mode aktiviert und auch einen neuen AccessCode generiert.
Druckermodell habe ich entsprechend ausgewählt.

Was kann ich noch an Infos liefern?

[HagiTheHack]

Habe es gerade auch getestet mit einem P2S mit AMS2 Pro, leider auch kein Erfolg.