Doesn't work with IMX296 (GS Camera) (Raspbery PI) #1649
Description
Did you read the guide?
Yes
What is the base version number of Motion being used?
4.3.x
What was the install method?
Installed via package tool
What is base architecture?
ARM-32bit
What is the distro being used?
Raspbian
Disto version number
Linux raspberrypi 6.1.16-v7+ #1636 SMP Fri Mar 10 18:37:13 GMT 2023 armv7l GNU/Linux
Camera type(s) being used?
PI cam via MMAL
Describe the issue/problem and steps to reproduce
This camera literally released couple days ago and I already tested it with motion on RPi.
https://www.raspberrypi.com/news/new-raspberry-pi-global-shutter-camera/
$ sudo vcgencmd get_camera
supported=1 detected=1, libcamera interfaces=0
/dev/video0 - exist
The "motion" app shows grey screen with text in top-left corner "UNABLE TO OPEN VIDEO DEVICE"
Worked great with same config and IMX477. I assume this is app incompatibility problem on that 4.3.2 version which available in RPi repo.
Relevant Motion log output (at log_level 8)
[0:motion] [NTC] [ALL] [Mar 12 05:58:33] motion_startup: Motion 4.3.2 Started
[0:motion] [NTC] [ALL] [Mar 12 05:58:33] motion_startup: Using default log type (ALL)
[0:motion] [NTC] [ALL] [Mar 12 05:58:33] motion_startup: Using log type (ALL) log level (NTC)
[0:motion] [NTC] [STR] [Mar 12 05:58:33] webu_start_strm: Starting all camera streams on port 8081
[0:motion] [NTC] [STR] [Mar 12 05:58:33] webu_strm_ntc: Started camera 0 stream on port 8081
[0:motion] [NTC] [STR] [Mar 12 05:58:33] webu_start_ctrl: Starting webcontrol on port 8080
[0:motion] [NTC] [STR] [Mar 12 05:58:33] webu_start_ctrl: Started webcontrol on port 8080
[0:motion] [NTC] [ENC] [Mar 12 05:58:33] ffmpeg_global_init: ffmpeg libavcodec version 58.91.100 libavformat version 58.45.100
[0:motion] [NTC] [ALL] [Mar 12 05:58:33] translate_init: Language: English
[0:motion] [NTC] [ALL] [Mar 12 05:58:33] motion_start_thread: Camera ID: 0 is from /etc/motion/motion.conf
[0:motion] [NTC] [ALL] [Mar 12 05:58:33] motion_start_thread: Camera ID: 0 Camera Name: (null) Device: /dev/video0
[0:motion] [NTC] [ALL] [Mar 12 05:58:33] main: Waiting for threads to finish, pid: 710
[1:ml1] [NTC] [ALL] [Mar 12 05:58:33] motion_init: Camera 0 started: motion detection Enabled
[1:ml1] [NTC] [VID] [Mar 12 05:58:33] vid_start: Opening V4L2 device
[1:ml1] [NTC] [VID] [Mar 12 05:58:33] v4l2_device_open: Using videodevice /dev/video0 and input -1
[1:ml1] [NTC] [VID] [Mar 12 05:58:33] v4l2_device_capability: - VIDEO_CAPTURE
[1:ml1] [NTC] [VID] [Mar 12 05:58:33] v4l2_device_capability: - VIDEO_OVERLAY
[1:ml1] [NTC] [VID] [Mar 12 05:58:33] v4l2_device_capability: - READWRITE
[1:ml1] [NTC] [VID] [Mar 12 05:58:33] v4l2_device_capability: - STREAMING
[1:ml1] [NTC] [VID] [Mar 12 05:58:33] v4l2_input_select: Name = "Camera 0"- CAMERA
[1:ml1] [NTC] [VID] [Mar 12 05:58:33] v4l2_norm_select: Device does not support specifying PAL/NTSC norm
[1:ml1] [NTC] [VID] [Mar 12 05:58:33] v4l2_pixfmt_set: Testing palette YU12 (1280x720)
[1:ml1] [NTC] [VID] [Mar 12 05:58:33] v4l2_pixfmt_set: Using palette YU12 (1280x720)
[1:ml1] [ERR] [VID] [Mar 12 05:58:33] v4l2_mmap_set: Error starting stream. VIDIOC_STREAMON: Invalid argument
[1:ml1] [ERR] [VID] [Mar 12 05:58:33] vid_start: V4L2 device failed to open
[1:ml1] [WRN] [ALL] [Mar 12 05:58:33] motion_init: Could not fetch initial image from camera
[1:ml1] [WRN] [ALL] [Mar 12 05:58:33] motion_init: Motion continues using width and height from config file(s)
[1:ml1] [NTC] [ALL] [Mar 12 05:58:33] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1] [NTC] [ALL] [Mar 12 05:58:33] image_ring_resize: Resizing pre_capture buffer to 4 items
[1:ml1] [WRN] [ALL] [Mar 12 05:58:40] mlp_retry: Retrying until successful connection with camera
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] vid_start: Opening V4L2 device
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_open: Using videodevice /dev/video0 and input -1
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_capability: - VIDEO_CAPTURE
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_capability: - VIDEO_OVERLAY
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_capability: - READWRITE
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_capability: - STREAMING
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_input_select: Name = "Camera 0"- CAMERA
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_norm_select: Device does not support specifying PAL/NTSC norm
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_set: Testing palette YU12 (1280x720)
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] v4l2_pixfmt_set: Error setting pixel format.
VIDIOC_S_FMT: : Device or resource busy
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: Configuration palette index 17 (YU12) for 1280x720 doesn't work.
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: Supported palettes:
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (0) YU12 (Planar YUV 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (1) YUYV (YUYV 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (2) RGB3 (24-bit RGB 8-8-8)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (3) JPEG (JFIF JPEG)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (4) H264 (H.264)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (5) MJPG (Motion-JPEG)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (6) YVYU (YVYU 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (7) VYUY (VYUY 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (8) UYVY (UYVY 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (9) NV12 (Y/UV 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (10) BGR3 (24-bit BGR 8-8-8)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (11) YV12 (Planar YVU 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (12) NV21 (Y/VU 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (13) RX24 (32-bit XBGR 8-8-8-8)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_set: Testing palette UYVY (1280x720)
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] v4l2_pixfmt_set: Error setting pixel format.
VIDIOC_S_FMT: : Device or resource busy
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: Palette selection failed for format UYVY
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: Unable to find a compatible palette format.
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] vid_start: V4L2 device failed to open
[1:ml1] [NTC] [ALL] [Mar 12 05:58:40] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Mar 12 05:58:40] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Mar 12 05:58:40] motion_start_thread: Camera ID: 0 is from /etc/motion/motion.conf
[0:motion] [NTC] [ALL] [Mar 12 05:58:40] motion_start_thread: Camera ID: 0 Camera Name: (null) Device: /dev/video0
[1:ml1] [NTC] [ALL] [Mar 12 05:58:40] motion_init: Camera 0 started: motion detection Enabled
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] vid_start: Opening V4L2 device
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_open: Using videodevice /dev/video0 and input -1
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_capability: - VIDEO_CAPTURE
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_capability: - VIDEO_OVERLAY
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_capability: - READWRITE
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_capability: - STREAMING
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_input_select: Name = "Camera 0"- CAMERA
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_norm_select: Device does not support specifying PAL/NTSC norm
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_set: Testing palette YU12 (1280x720)
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] v4l2_pixfmt_set: Error setting pixel format.
VIDIOC_S_FMT: : Device or resource busy
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: Configuration palette index 17 (YU12) for 1280x720 doesn't work.
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: Supported palettes:
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (0) YU12 (Planar YUV 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (1) YUYV (YUYV 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (2) RGB3 (24-bit RGB 8-8-8)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (3) JPEG (JFIF JPEG)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (4) H264 (H.264)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (5) MJPG (Motion-JPEG)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (6) YVYU (YVYU 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (7) VYUY (VYUY 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (8) UYVY (UYVY 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (9) NV12 (Y/UV 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (10) BGR3 (24-bit BGR 8-8-8)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (11) YV12 (Planar YVU 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (12) NV21 (Y/VU 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (13) RX24 (32-bit XBGR 8-8-8-8)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_set: Testing palette UYVY (1280x720)
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] v4l2_pixfmt_set: Error setting pixel format.
VIDIOC_S_FMT: : Device or resource busy
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: Palette selection failed for format UYVY
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: Unable to find a compatible palette format.
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] vid_start: V4L2 device failed to open
[1:ml1] [WRN] [ALL] [Mar 12 05:58:40] motion_init: Could not fetch initial image from camera
[1:ml1] [WRN] [ALL] [Mar 12 05:58:40] motion_init: Motion continues using width and height from config file(s)
[1:ml1] [NTC] [ALL] [Mar 12 05:58:40] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1] [NTC] [ALL] [Mar 12 05:58:40] image_ring_resize: Resizing pre_capture buffer to 4 items
[1:ml1] [WRN] [ALL] [Mar 12 05:58:40] mlp_retry: Retrying until successful connection with camera
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] vid_start: Opening V4L2 device
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_open: Using videodevice /dev/video0 and input -1
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_capability: - VIDEO_CAPTURE
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_capability: - VIDEO_OVERLAY
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_capability: - READWRITE
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_device_capability: - STREAMING
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_input_select: Name = "Camera 0"- CAMERA
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_norm_select: Device does not support specifying PAL/NTSC norm
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_set: Testing palette YU12 (1280x720)
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] v4l2_pixfmt_set: Error setting pixel format.
VIDIOC_S_FMT: : Device or resource busy
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: Configuration palette index 17 (YU12) for 1280x720 doesn't work.
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: Supported palettes:
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (0) YU12 (Planar YUV 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (1) YUYV (YUYV 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (2) RGB3 (24-bit RGB 8-8-8)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (3) JPEG (JFIF JPEG)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (4) H264 (H.264)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (5) MJPG (Motion-JPEG)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (6) YVYU (YVYU 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (7) VYUY (VYUY 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (8) UYVY (UYVY 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (9) NV12 (Y/UV 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (10) BGR3 (24-bit BGR 8-8-8)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (11) YV12 (Planar YVU 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (12) NV21 (Y/VU 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: (13) RX24 (32-bit XBGR 8-8-8-8)
[1:ml1] [NTC] [VID] [Mar 12 05:58:40] v4l2_pixfmt_set: Testing palette UYVY (1280x720)
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] v4l2_pixfmt_set: Error setting pixel format.
VIDIOC_S_FMT: : Device or resource busy
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: Palette selection failed for format UYVY
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] v4l2_pixfmt_select: Unable to find a compatible palette format.
[1:ml1] [ERR] [VID] [Mar 12 05:58:40] vid_start: V4L2 device failed to open
[1:ml1] [NTC] [ALL] [Mar 12 05:58:40] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Mar 12 05:58:41] main: Motion thread 1 restart
[0:motion] [NTC] [ALL] [Mar 12 05:58:41] motion_start_thread: Camera ID: 0 is from /etc/motion/motion.conf
[0:motion] [NTC] [ALL] [Mar 12 05:58:41] motion_start_thread: Camera ID: 0 Camera Name: (null) Device: /dev/video0
[1:ml1] [NTC] [ALL] [Mar 12 05:58:41] motion_init: Camera 0 started: motion detection Enabled
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] vid_start: Opening V4L2 device
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_device_open: Using videodevice /dev/video0 and input -1
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_device_capability: - VIDEO_CAPTURE
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_device_capability: - VIDEO_OVERLAY
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_device_capability: - READWRITE
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_device_capability: - STREAMING
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_input_select: Name = "Camera 0"- CAMERA
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_norm_select: Device does not support specifying PAL/NTSC norm
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_set: Testing palette YU12 (1280x720)
[1:ml1] [ERR] [VID] [Mar 12 05:58:41] v4l2_pixfmt_set: Error setting pixel format.
VIDIOC_S_FMT: : Device or resource busy
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: Configuration palette index 17 (YU12) for 1280x720 doesn't work.
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: Supported palettes:
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (0) YU12 (Planar YUV 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (1) YUYV (YUYV 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (2) RGB3 (24-bit RGB 8-8-8)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (3) JPEG (JFIF JPEG)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (4) H264 (H.264)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (5) MJPG (Motion-JPEG)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (6) YVYU (YVYU 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (7) VYUY (VYUY 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (8) UYVY (UYVY 4:2:2)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (9) NV12 (Y/UV 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (10) BGR3 (24-bit BGR 8-8-8)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (11) YV12 (Planar YVU 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (12) NV21 (Y/VU 4:2:0)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: (13) RX24 (32-bit XBGR 8-8-8-8)
[1:ml1] [NTC] [VID] [Mar 12 05:58:41] v4l2_pixfmt_set: Testing palette UYVY (1280x720)
[1:ml1] [ERR] [VID] [Mar 12 05:58:41] v4l2_pixfmt_set: Error setting pixel format.
VIDIOC_S_FMT: : Device or resource busy
[1:ml1] [ERR] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: Palette selection failed for format UYVY
[1:ml1] [ERR] [VID] [Mar 12 05:58:41] v4l2_pixfmt_select: Unable to find a compatible palette format.
[1:ml1] [ERR] [VID] [Mar 12 05:58:41] vid_start: V4L2 device failed to open
[1:ml1] [WRN] [ALL] [Mar 12 05:58:41] motion_init: Could not fetch initial image from camera
[1:ml1] [WRN] [ALL] [Mar 12 05:58:41] motion_init: Motion continues using width and height from config file(s)
[1:ml1] [NTC] [ALL] [Mar 12 05:58:41] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1] [NTC] [ALL] [Mar 12 05:58:41] image_ring_resize: Resizing pre_capture buffer to 4 items
[1:ml1] [NTC] [ALL] [Mar 12 05:58:45] mlp_actions: End of event 1
[1:ml1] [NTC] [ALL] [Mar 12 05:58:45] motion_loop: Thread exiting
[0:motion] [NTC] [ALL] [Mar 12 05:58:46] main: Threads finished
[0:motion] [NTC] [ALL] [Mar 12 05:58:46] main: Motion terminating
[0:motion] [NTC] [ALL] [Mar 12 05:58:46] motion_remove_pid: Closing logfile (/var/log/motion/motion.log).