How can I build for Linux aarm64, like raspberry pi?

[edwardzhu]

When the project is built on Linux ARM64, it throws the errors.

Command:

cmake .. -DMULTY_WITH_TESTS=OFF && make

Error:

In file included from /home/admin/temp/Multy-Core/third-party/libwally-core/src/scrypt.c:38:
/home/admin/temp/Multy-Core/third-party/libwally-core/src/scrypt/crypto_scrypt_smix_neon.c: In function ‘neon_salsa20_8_intrinsic’:
/home/admin/temp/Multy-Core/third-party/libwally-core/src/scrypt/crypto_scrypt_smix_neon.c:107:5: note: use -flax-vector-conversions to permit conversions between vectors with differing element types or numbers of subparts
     x0x1x2x3 = vld1q_u8((uint8_t *) input);
     ^~~~~~~~
/home/admin/temp/Multy-Core/third-party/libwally-core/src/scrypt/crypto_scrypt_smix_neon.c:107:14: error: incompatible types when assigning to type ‘uint32x4_t’ from type ‘uint8x16_t’
     x0x1x2x3 = vld1q_u8((uint8_t *) input);
              ^
/home/admin/temp/Multy-Core/third-party/libwally-core/src/scrypt/crypto_scrypt_smix_neon.c:108:14: error: incompatible types when assigning to type ‘uint32x4_t’ from type ‘uint8x16_t’
     x4x5x6x7 = vld1q_u8(16 + (uint8_t *) input);
              ^
/home/admin/temp/Multy-Core/third-party/libwally-core/src/scrypt/crypto_scrypt_smix_neon.c:109:16: error: incompatible types when assigning to type ‘uint32x4_t’ from type ‘uint8x16_t’
     x8x9x10x11 = vld1q_u8(32 + (uint8_t *) input);
                ^
/home/admin/temp/Multy-Core/third-party/libwally-core/src/scrypt/crypto_scrypt_smix_neon.c:110:18: error: incompatible types when assigning to type ‘uint32x4_t’ from type ‘uint8x16_t’
     x12x13x14x15 = vld1q_u8(48 + (uint8_t *) input);
                  ^
make[2]: *** [third-party/libwally-core/CMakeFiles/libwally-core.dir/build.make:206: third-party/libwally-core/CMakeFiles/libwally-core.dir/src/scrypt.c.o] Error 1
make[1]: *** [CMakeFiles/Makefile2:365: third-party/libwally-core/CMakeFiles/libwally-core.dir/all] Error 2
make: *** [Makefile:130: all] Error 2

Does Multy-core support aarm64? How can I configure the make parameter to build the library?