CreateComputeInstance() shows “Not Supported”

[ytaoeer]

go ： 1.18
go-nvml v0.12.0-1
the code is below


gpu instance can be created and using command line, i can create gi and ci.

[ytaoeer]

NVIDIA-SMI 535.54.03
Driver Version: 535.54.03
CUDA Version: 12.2
NVIDIA A100-PCIE-40GB

[elezar]

gpu instance can be created and using command line, i can create gi and ci.

Which commands (I assume nvidia-smi) do you use?

[ytaoeer]

yes, "sudo nvidia-smi mig -i 0 -cgi 19 -C",i can create gi and ci；
but by using nvml go lib, i can just create gi, when using CreateComputeInstance() to create ci, it fail

[elezar]

Just as a sanity check. Do you have multiple A100 devices available? In the example you show above you access a device with index 1 wherease the nvidia-smi command accesses device 0.

For what it's worth, we use the following flow to create a compute instance:

gi, ret = device.CreateGpuInstance(&giProfileInfo)
if ret != nvml.SUCCESS {
	return fmt.Errorf("error creating GPU instance: %v", ret)
}

ciProfileInfo, ret := gi.GetComputeInstanceProfileInfo(0, 0)
if ret != nvml.SUCCESS {
	return fmt.Errorf("error getting Compute instance profile info for: %v", ret)
}

_, ret = gi.CreateComputeInstance(&ciProfileInfo)
if ret != nvml.SUCCESS {
	return fmt.Errorf("error creating Compute instance: %v", ret)
}

in some of our toolking. Note the call to GetComputeInstanceProfileInfo. I believe you can use 0 for both

[ytaoeer]

yes，this node has 4 a100.i will try GetComputeInstanceProfileInfo to create ci profileinfo. thanks

[ytaoeer]

Just as a sanity check. Do you have multiple A100 devices available? In the example you show above you access a device with index 1 wherease the nvidia-smi command accesses device 0.

For what it's worth, we use the following flow to create a compute instance:

gi, ret = device.CreateGpuInstance(&giProfileInfo)
if ret != nvml.SUCCESS {
	return fmt.Errorf("error creating GPU instance: %v", ret)
}

ciProfileInfo, ret := gi.GetComputeInstanceProfileInfo(0, 0)
if ret != nvml.SUCCESS {
	return fmt.Errorf("error getting Compute instance profile info for: %v", ret)
}

_, ret = gi.CreateComputeInstance(&ciProfileInfo)
if ret != nvml.SUCCESS {
	return fmt.Errorf("error creating Compute instance: %v", ret)
}

in some of our toolking. Note the call to GetComputeInstanceProfileInfo. I believe you can use 0 for both

it works. thank you very much. so i guess the problem is creating ComputeInstanceProfileInfo by myself. but according to the source code, the go lib only pass ComputeInstanceProfileInfo.Id to the nvml.

[elezar]

As far as I am aware, there are different versions of the ComputeInstanceProfileInfo struct -- or at least a versioned struct was introduced recently. It may be that constructing it manually created the wrong version and this is what caused it error.

Actually, it may also be that the ProfileID and the info ID are not the same. Could you output the returned ciProfileInfo struct and confirm its .ID value?

[ytaoeer]

i use a release version go-nvml v0.12.0-1. the output is below