WebTop 5.26.1

[Amygos]

Upgrade WebTop to release 5.26.1

• Release notes 5.26.0
• Release notes 5.26.1

Required modifications:

• Build release 5.26.1
• Webtop Pecbridge component #6984
• Add new UI configuration options
• Add New Ui configuration on the NS8 - NS7 migration
• Add new login page

[nethbot]

in 7.9.2009/testing:

• nethserver-webtop5-1.8.21-1.2.g936a229.ns7.noarch.rpm x86_64 armhfp aarch64

[nethbot]

in 7.9.2009/testing:

• webtop5-1.5.20-1.2.gca5fb05.ns7.noarch.rpm x86_64 armhfp aarch64

[Amygos]

Testing release: ghcr.io/nethserver/webtop:1.0.22-testing.4

[Amygos]

Test Case 1: Verify that a new installation of WebTop testing version works correctly

Description: Ensure that WebTop's testing version functions correctly after a fresh installation of the module.
Pre-conditions:

• A fresh installation of the WebTop testing module is available.
• The installation is performed on a compatible system.

Steps:

1. Install the WebTop testing module.
2. Follow the standard installation steps for the module.
3. Open WebTop after installation.
4. Verify that all basic features (login, main page, settings) function correctly.

Expected Result: WebTop's testing version should work without any errors after installation.
Post-conditions: None.

---

Test Case 2: Verify that an update to WebTop testing version functions correctly

Description: Ensure that updating WebTop to the testing version from a previous version works without issues.
Pre-conditions:

• The previous version of WebTop is installed.
• The update module for the WebTop testing version is available.

Steps:

1. Perform the update from the previous version to the WebTop testing version.
2. Open WebTop after the update.
3. Verify that existing data and settings are retained.
4. Test core features (login, user data, settings) to ensure functionality.

Expected Result: The update to the WebTop testing version should be successful, and all features should work as expected.
Post-conditions: None.

---

Test Case 3: Verify that the new login page of WebTop testing version loads correctly

Description: Ensure that the new login page is properly loaded in WebTop testing version.
Pre-conditions: None.

Steps:

1. Open WebTop.
2. Navigate to the login page.
3. Observe the page loading.

Expected Result: The new login page should load without any errors.
Post-conditions: None.

---

Test Case 4: Verify that the new theme is the default in new installations of WebTop testing version

Description: Ensure that the newly introduced theme is set as the default for fresh installations of the WebTop testing version.
Pre-conditions:

• A fresh installation of the WebTop testing module is available.

Steps:

1. Install the WebTop testing module.
2. Open WebTop after installation.
3. Verify that the new theme is applied by default.

Expected Result: The new theme should be the default theme in the WebTop testing version.
Post-conditions: None.

---

Test Case 5: Verify that users are prompted to try the new theme during migration or update to WebTop testing version

Description: Ensure that users are asked to try the new theme when migrating or updating to the WebTop testing version.
Pre-conditions:

• For Migration: The previous version of the WebTop module must be installed on NethServer 7.
• For Update: The older version of WebTop is installed, and the new theme should be part of the testing update module.

Steps:

1. Perform the migration or update to the WebTop testing version.
2. Open WebTop after the update.
3. Verify that the user is prompted to choose between keeping the new theme or reverting to the old one.

Expected Result: After the update or migration, the user should be prompted to either keep the new theme or revert to the old one.
Post-conditions: None.

---

Test Case 6: Verify that the new landing page in WebTop testing version is the Mail service

Description: Ensure that the default landing page after login in the WebTop testing version is the Mail service.
Pre-conditions: None.

Steps:

1. Open WebTop and log in with valid credentials.
2. Observe the landing page after login.

Expected Result: The landing page should be the Mail service in the WebTop testing version.
Post-conditions: None.

---

Test Case 7: Verify that the calendar scheduler in WebTop testing version has a time resolution of 15 minutes

Description: Ensure that the calendar scheduler allows selecting time slots in 15-minute intervals in the WebTop testing version.
Pre-conditions: None.

Steps:

1. Open WebTop.
2. Navigate to the calendar scheduler.
3. Try to schedule a new event.
4. Verify that time slots are available in 15-minute increments.

Expected Result: The time resolution in the calendar should be 15 minutes in the WebTop testing version.
Post-conditions: None.

---

Test Case 8: Verify that adding new domains is not possible in WebTop testing version's admin interface

Description: Ensure that the multiple domain mode option is available but that new domains cannot be added via the admin interface in the WebTop testing version.
Pre-conditions: Access to WebTop's admin interface.

Steps:

1. Log in to the admin interface of WebTop.
2. Navigate to the multiple domain mode settings.
3. Right-click to open the context menu for adding a new domain.
4. Attempt to select the option to add a new domain.

Expected Result: The context menu for adding a new domain should appear, but it should be unclickable or grayed out, preventing the addition of new domains.
Post-conditions: None.

---

Test Case 9: Check that the LogViewer panel is not present in admin management of WebTop testing version

Description: Ensure that the LogViewer panel is not present in the admin management interface of the WebTop testing version.
Pre-conditions: Access to the admin management interface.

Steps:

1. Log in to the admin management interface.
2. Navigate to the relevant section for system panels.
3. Verify that the LogViewer panel is not present.

Expected Result: The LogViewer panel should not be present in the admin management interface of WebTop testing version.
Post-conditions: None.