MoH settings are reset after changing the queue in the Visual Plan

[Ilvo]

By setting the MoH parameter to "Inherit" in the PBX advanced settings, this is reset to "Default" if at least one queue is modified using the Visual Plan.

Steps to reproduce

1. In the PBX Advanced settings, set "Inherit" for at least one queue.
2. Use the Visual Plan to edit the queue or other queue, for example, the agents and save.
3. Return to the Advanced settings and verify that the MoH has returned to "Default."

Expected behavior

Changing the agents does not change the MoH.

Actual behavior

By modifying the agents, the MoH is modified, not only that of the same queue but of all the others if there is more than one.

Components

Nethvoice 1.4.6

[Stell0]

1.5.1-testing.7

Test Case 1: Verify MoH remains “Inherit” after modifying queue via Visual Plan

Steps:

• Go to PBX → Advanced Settings.
• Set the MoH parameter of a queue (e.g. queue_100) to "Inherit".
• Open Visual Plan.
• Edit that same queue
• Save
• Return to Advanced Settings and check the MoH parameter for the queue.

Expected result:

• MoH for queue_100 remains "Inherit".
• No automatic reset to "Default" occurs.

Test Case 2: Verify “Default” MoH remains stable if explicitly selected

• Set MoH as "default" from Advanced
• Edit the queue in Visual Plan
• Save and apply.
• Check MoH in Advanced Settings.

Expected result:

• MoH remains "Default", not changed to "Inherit" or other values.