Add ATTinyx61support

[astro59]

Is it possible to use PinChangeInterrupt with ATTiny861 ?

[NicoHood]

Not yet, but I can add support for it, if you like. It seems to support PCINT on all pins:
http://ww1.microchip.com/downloads/en/devicedoc/atmel-2588-8-bit-avr-microcontrollers-tinyavr-attiny261-attiny461-attiny861_datasheet.pdf

[astro59]

Yes, I like it. I will be happy to test this on my project. I need a lot of independent pins, a few of which are interrupts.

[NicoHood]

I accidentally commited the changes directly to master, without a PR. The commit is this one:
ca4fe2e

Please test and report if it works. Please test all pins (not just a few), if possible.

[NicoHood]

I've just released 1.2.9. Please test if that works for you. I expect that this should be an easy one and just work. If not, I will try to fix it ASAP.

[astro59]

Hi, I tested the library but without success. I just replaced LED_BUILTIN by pinLED to place a led with its resistor on an ATTiny861. I attach a photo of the assembly and the modified source code. The led lights up for 1 second but the button does not work Did I make a mistake? Thanks

…

_____ De : NicoHood ***@***.*** Envoyé : mardi 18 mai 2021 19:33 À : NicoHood/PinChangeInterrupt Cc : Alain; Author Objet : Re: [NicoHood/PinChangeInterrupt] Ajout ATTinyx61 (#39) I've just released 1.2.9. Please test if that works for you. I expect that this should be an easy one and just work. If not, I will try to fix it ASAP. � You are receiving this because you authored the thread. Reply to this email directly, view <#39 (comment) 4848> it on GitHub, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AI7YQEZBCJH7E7WAPMU4QMLTO KQFRANCNFSM4463HNPA> . <https://github.com/notifications/beacon/AI7YQE4LPRSOGUCZNJCQ3JDTOKQFRA5CNFS M4463HNPKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOGJCQQEA .gif>

[NicoHood]

I cannot see a photo. Please paste your source, if possible.

This is the example to use for testing:
https://github.com/NicoHood/PinChangeInterrupt/blob/master/examples/PinChangeInterrupt_Led/PinChangeInterrupt_Led.ino

[astro59]

#include <PinChangeInterrupt.h>
#include <PinChangeInterruptBoards.h>
#include <PinChangeInterruptPins.h>
#include <PinChangeInterruptSettings.h>

// ATMEL ATTINY 261/461/861 et 261V/461V/861V  -  BRANCHEMENTS

// Choose a valid PinChangeInterrupt pin of your Arduino board
#define pinBlink 4
#define pinLED   11

void setup() {
  // set pin to input with a pullup, led to output
  pinMode(pinBlink, INPUT_PULLUP);
  pinMode(pinLED, OUTPUT);

  // Manually blink once to test if LED is functional
  blinkLed();
  delay(1000);
  blinkLed();

  // Attach the new PinChangeInterrupt and enable event function below
  attachPCINT(digitalPinToPCINT(pinBlink), blinkLed, CHANGE);
}

void blinkLed() {
  // Switch Led state
  digitalWrite(pinLED, !digitalRead(pinLED));
}

void loop() {
  // Nothing to do here
}

`

[astro59]

Oups !

for this the button is on physical pin 14 and led on physical pin 4
I have tested other configurations.

[astro59]

https://www.astrolynx.com/Electronique/IMG_20210518_202605.jpg

[NicoHood]

Can you check what digitalPinToPCINT(pinBlink) returns (it should return 4)? As an alternative you could use for physical pin14/PA4/D4/PCINT4:
attachPCINT(PCINT4, blinkLed, CHANGE);

Can you also check if a normal digitalread on the button pin works?

Which attiny core do you use? For example there are two versions for digital pins in this core:
https://github.com/SpenceKonde/ATTinyCore/blob/master/avr/variants/tinyX61_New/pins_arduino.h#L173
https://github.com/SpenceKonde/ATTinyCore/blob/master/avr/variants/tinyX61/pins_arduino.h#L189

[astro59]

I have to go
I'm doing this tonight when I get home