Incorrect resolution displayed in SteamVR beta

[lefufu]

Description of issue

The current stemVR beta 1496358520 give the headset resolution per eye below the supersampling slider.
The resolution per eye displayed is 2160x1200 instead of 1080x1200. So steamVR-OSVR may gives steamVR an incorrect resolution.

Steps to reproduce the problem

Reproduced at each launch of SteamVR

System configuration

Please specify any relevant system configuration information.

• **Graphics card(s): GTX 780
• **Operating system: Win10
• **Version of SteamVR : beta 1496358520
• **Version of SteamVR-OSVR: build 344 on top of installer 0.8.0

Please attach the following files:

• The osvr_server configuration file.
• The vr*.txt files from the Steam logs directory.

osvr_config_HDK_2_default.zip
steamVR_system_report.zip

[godbyk]

Enable verbose logging by editing the G:\jeux\steam\config\steamvr.vrsettings file in a text editor (like Notepad). Add a driver_osvr section if it doesn't already exist. Then add (or edit) "verbose": true to that section.

For example:

{
    "driver_osvr": {
        "verbose": true
    }
}

(You'll need to ensure that you have commas in the appropriate places if you're adding this entry to an existing file. Check the G:\jeux\steam\logs\vrserver.txt file to see if it reports any errors when reading the vrsettings file.)

Then rerun SteamVR and send me an updated system report. The vrserver.txt log file will contain output that shows what the SteamVR-OSVR driver is telling SteamVR to use for the resolution for each eye.

[lefufu]

Done.
I purged all the steam log file before doing the operation and launched IL2 BoS for the test (By the way there is a problem with Il2Bos and OSVR, I opened a ticket before and this is why I was looking for any elements that can be the root cause...).
I have a 2 screen display (1920x1080 for each).

logs.zip

[lefufu]

here is the information sent by an CV1 user on a forum.
The number are a bit weird (oculus settings added to steamVR? ) but the horizontal res. is less than the vertical res., unlike my HDK2...

[godbyk]

The values in the vrserver.txt log file look correct for the OSVR HDK 2:

Sat Jun 03 2017 22:36:18.646 - osvr: GetEyeOutputViewport(left eye): Calculated settings: x = 1080, y = 0, width = 1080, height = 1200.
Sat Jun 03 2017 22:36:18.646 - osvr: GetWindowBounds(): Scan-out origin: Lower-right, rotation: 0 degrees counter-clockwise, orientation: Landscape (flipped)
Sat Jun 03 2017 22:36:18.646 - osvr: GetWindowBounds(): Calculated settings: x = 1920, y = 0, width = 2160, height = 1200.
Sat Jun 03 2017 22:36:18.646 - osvr: Display mode: horizontal side-by-side.
Sat Jun 03 2017 22:36:18.646 - osvr: Display orientation: landscape flipped.
Sat Jun 03 2017 22:36:18.646 - osvr: GetEyeOutputViewport(right eye): Calculated settings: x = 0, y = 0, width = 1080, height = 1200.

The window bounds are set to the resolution of the HDK 2. Each eye takes up half the window.

The values OSVR provides to SteamVR are only suggestions, though. So if a game wants to render to a larger texture size, it may, and SteamVR will scale it down to match the HDK. I wonder if what SteamVR is reporting in that dialog is the actual texture size being rendered and not the values suggested by the OSVR driver.

If it were actually scaling a 2160×1200 image into a single eye at 1080×1200, then everything you saw would be squished horizontally and only appear half as wide as it should.

[lefufu]

This is the case in Il2Bos, the image IS squished horizontally in VR display, that makes the game unplayable....So there is a problem because at least steamVR and Il2Bos are displaying/using a wrong resolution.
DCS World and War Thunder are OK, but maybe they did not use the same processing...And unlike DCS world and War thunder, which have at first Oculus support and then OpenVR support, IL2Bos was provided with OpenVR support only.
Maybe you could build a test version in order to check what IL2Bos will do with a divided by two horiz. resolution ? I tried to modify FOV and didn't have any good results in the game.

[Balderick]

http://steamcommunity.com/games/250820/announcements/detail/1319966586768409728

[lefufu]

Well, it's looks like the SDK install has broken the previous OSVR 0.8 install...
I must uninstall all OSVR component then re-install them in order to test this SteamVR version.
EDIT : this SteamVR version did not change anything, either in res. displayed in steamVR or in IL2....

[Balderick]

It proves it is not an osvr issue. The issue is with the app. Looks like the game is forcing those display parameters for a vive hmd.

Do current steamvr builds still give the same super sampling info?

[lefufu]

Yes, steamVR is still giving a double horizontal res, so I do not agree that it is IL2 fault...

[godbyk]

@lefufu Unless it's giving you the wrong results for all SteamVR applications, then it sounds like it's something particular to IL2.

[lefufu]

@godbyk : I do not agree with this Point of view.

1. SteamVR is reporting a good Horizontal vs Vertical ratio for the Rift and IL2 is working well
2. SteamVR is reporting a wrong Horizontal vs Vertical Ratio for the HDK2 is il2 is not working

As IL2 devs answered to my ticket that the problem is on headset side and OSVR devs said that the problem is on the game side...it looks like HDK2 will never work with IL2...

[godbyk]

@lefufu As shown above, SteamVR-OSVR is reporting the expected values. So I'm not sure where the breakdown is occurring.

[Balderick]

lefufu commented 6 hours ago
@godbyk : I do not agree with this Point of view.

SteamVR is reporting a good Horizontal vs Vertical ratio for the Rift and IL2 is working well
SteamVR is reporting a wrong Horizontal vs Vertical Ratio for the HDK2 is il2 is not working
As IL2 devs answered to my ticket that the problem is on headset side and OSVR devs said that the problem is on the game side...it looks like HDK2 will never work with IL2...

These super sampling settings have only just been added to steamvr. SteamVR itself could be messing up those settings.
Try using steam support channels as well as IL2BoS support channels.

I'm sure another hdk user very well could share a fix or explanation but this seems to be unique to IL2BoS

To be honest I just leave super sampling settings alone as I have noticed weird and wonderful numbers being reported in the steamvr settings tab for super sampling. I make sure the advanced settings are disabled and just ignore the slider settings.

Seeing fixes being posted by Valve for IL2BoS in SteamVR announcements is encouraging because that means both Valve and IL2BoS devs are working on fixes and are doing so at both ends.

[lefufu]

Maybe it's a stupid remark, but couldn't it be more efficient if a steamVR ticket is opened by devs ?
You surely have more information to give to steamVR support than standard users.
And, as IL2 BoS+steamVR is working for Vive, Rift and Pimax (Pimax users had the same problem than us at the beginning, but they were solved by a "Piplay" update) I do not think that there will be changes for HDK2 with the current process....

[Balderick]

Anybody with a github account can open an issue with steamvr at https://github.com/ValveSoftware/openvr/issues or with a steam account at https://steamcommunity.com/app/250820/discussions/ or https://steamcommunity.com/app/358720/discussions/

The official steam support channels are found at https://support.steampowered.com/kb_article.php?ref=5254-FJKZ-7829

Subscribing to https://steamcommunity.com/app/507090 keeps you informed of upstream changes to steamvr tracking.

I think what is confusing is that osvr devs like to take opportunity to add osvr support for each new game or device when really a better steamvr-osvr driver (or more specifically "openvr driver") for osvr hdk is possibly all that is needed.