part value

[rudehardware]

What is value for capacitor, inductor and dioder for voltage divider? thnks

[PhamDuyAnh]

Hi! My project uses hypertherm plasma source, it has a voltage divider available. My circuit was redesigned from the information I found on google. I have never tested it before, so it is not clear the value. https://github.com/PhamDuyAnh/Arduino_Plasma_THC/blob/master/THC-voltage-divider-2.jpg In the picture! Inductors and capacitors have the noise filter and blocking HF (pilot arc). I think <5uH and about 470nF600V

…

On Sat, Dec 19, 2020, 1:37 PM rudehardware ***@***.***> wrote: What is value for capacitor, inductor and dioder for voltage divider? thnks — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#2>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABJI257KLKLR53HKX4ZH63LSVRC4DANCNFSM4VCCFCCA> .

[rudehardware]

hyperterm uses 1:50 or 1:20 volt divider?

[PhamDuyAnh]

It's multi optional. I used 1:50, max output voltage is 6V. But averaging about 2-3V (equivalent to 100-150V plasma voltage)

…

On Thu, Dec 24, 2020, 6:29 PM rudehardware ***@***.***> wrote: hyperterm uses 1:50 or 1:20 volt divider? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#2 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABJI255JUYFXLQGYBMST7ZTSWMQZPANCNFSM4VCCFCCA> .

[rudehardware]

ok thanks for the info. im starting to build :)