Printer overriding changes in Exposure Time

[m3hisham]

I wanted to change the exposure time for certain layers. When I do that with this editor and then print on the printer, the printer acts as if I did not make any changes. It seems to be overriding the changes and following the original exposure time. Is there a way to solve this issue?

I verified the edited photon file by opening it on photon-file-validator software. That software also shows that the exposure time is changed as I had done. But the printer doesn't detect these changes somehow.

If anyone knows how to fix this, please help!

[X3msnake]

You cannot, not as per layer. Untill Chitubox (CBD) releases a firmware that allows to read layer time per individual layer all you can set is base layer time and normal layer time m3hisham <notifications@github.com> escreveu no dia segunda, 28/10/2019 à(s) 14:36:

…

I wanted to change the exposure time for certain layers. When I do that with this editor and then print on the printer, the printer acts as if I did not make any changes. It seems to be overriding the changes and following the original exposure time. Is there a way to solve this issue? I verified the edited photon file by opening it on photon-file-validator software. That software also shows that the exposure time is changed as I had done. But the printer doesn't detect these changes somehow. If anyone knows how to fix this, please help! — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#104?email_source=notifications&email_token=ACUR56SYRRLZ5AT6PUVREFLQQ32FRA5CNFSM4JF3CHY2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HUZAT6Q>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACUR56SEW6VFOS5XJO5JCLDQQ32FRANCNFSM4JF3CHYQ> .

-- Com os melhores cumprimentos, Vinicius Silva