Case/frame for Mesmerizer #713
Replies: 10 comments 19 replies
-
|
Dave did: https://github.com/PlummersSoftwareLLC/NightDriverStrip/tree/main/3DModel |
Beta Was this translation helpful? Give feedback.
-
|
OK, refining my question. Anyone doing a 3D case/frame that is selling it? 😀 |
Beta Was this translation helpful? Give feedback.
-
|
Not that I know of. What you could do is use the 3D model @sixfootdad referred to, and have one of the various business that sell 3D printing services (many of them online) print one for you. |
Beta Was this translation helpful? Give feedback.
-
|
Reconnected with someone that printed me a few parts for my car. He says he can do it. For the cost of a few boxes of ammo. 😊 |
Beta Was this translation helpful? Give feedback.
-
|
Just discovered my library system has 3D printing available. Who knew? |
Beta Was this translation helpful? Give feedback.
-
|
Sounds like a case of "problem solved" to me. :) |
Beta Was this translation helpful? Give feedback.
-
|
I just printed that model with a Bambu PS1. It took 2 hours. Let me say the fitment is PERFECT! Like seriously!!! Thanks Dave!!! |
Beta Was this translation helpful? Give feedback.
-
|
You’re welcome! Did you print the back as well? Or just the front stand?
Cheers,
Dave
… On Apr 25, 2025, at 9:51 AM, grustinkerbel ***@***.***> wrote:
I just printed that model with a Bambu PS1. It took 2 hours. Let me say the fitment is PERFECT! Like seriously!!! Thanks Dave!!!
—
Reply to this email directly, view it on GitHub <#713 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA4HCF62FTJD5GFFOETDJKL23JRZRAVCNFSM6AAAAAB3P5KAQCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTEOJUHE2TQMI>.
You are receiving this because you are subscribed to this thread.
|
Beta Was this translation helpful? Give feedback.
-
|
I printed the front stand via model P3 LED Frame.stl |
Beta Was this translation helpful? Give feedback.
-
|
I have the same question. What file is the back? Can we get a picture of the back? |
Beta Was this translation helpful? Give feedback.
-
|
This is a picture of the back of the ledframe, i don`t think there is another stl file especialy for the back. The ledmatrix fits the ledframe, and the pcb is mounted on the back of the matrix. I think the gcode is the file that dave used for his printer. A gcode that is made with either cura, orca slicer or you name it! Harrie :-) |
Beta Was this translation helpful? Give feedback.
-
|
OK, I've checked in the 3D model of the backplate into my fork! It's in davepl/nightdriverstrip/3dmodels |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
Ahaa, so there is backplate. Had not seen that before. Thanks dave, |
Beta Was this translation helpful? Give feedback.
-
|
Which printer file is that? |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
Does not show in what I see.
|
Beta Was this translation helpful? Give feedback.
-
|
That’s the main fork, you have to look in my fork. It’s an STL file, which you then run through your slicer to produce gcode.
- Dave
… On Apr 25, 2025, at 5:15 PM, IBMJunkman ***@***.***> wrote:
Does not show in what I see.
IMG_5465.png (view on web) <https://github.com/user-attachments/assets/28d1cb67-5b70-4d5b-8782-0ad7918df02f>
—
Reply to this email directly, view it on GitHub <#713 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA4HCF57YZCQPPIH4UWFMV323LF3LAVCNFSM6AAAAAB3P5KAQCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTEOJVGIYTMMI>.
You are receiving this because you commented.
|
Beta Was this translation helpful? Give feedback.
-
|
I am not a git person. Don’t understand main vs fork. Can I just get the url? |
Beta Was this translation helpful? Give feedback.
-
|
Thanks. |
Beta Was this translation helpful? Give feedback.
-
|
Here ya go mate. https://github.com/davepl/NightDriverStrip/tree/main/3DModel |
Beta Was this translation helpful? Give feedback.
-
|
Now also merged into the main tree: https://github.com/PlummersSoftwareLLC/NightDriverStrip/blob/main/3DModel/Hub75BackplateWithNotch.stl. It's interesting to see that GitHub actually renders it too. |
Beta Was this translation helpful? Give feedback.
-
|
OK, someone printed the frame and back for me. Used carbon infused SLA. Need to sand the inside of the frame just a wee bit. But the big question is: what screw size is needed for the back? Any chance they are 6-32? |
Beta Was this translation helpful? Give feedback.
-
|
Found they are M3. A M3*8 works fine. |
Beta Was this translation helpful? Give feedback.
-
|
Mounted.
|
Beta Was this translation helpful? Give feedback.
-
|
Nice work mate! |
Beta Was this translation helpful? Give feedback.
-
|
Only cost me 6 boxes of 9mm ammo. 😀 |
Beta Was this translation helpful? Give feedback.
-
|
I would have done it for x100 rounds of .38 :special :)
…On Tue, May 6, 2025 at 4:21 PM IBMJunkman ***@***.***> wrote:
Only cost me 6 boxes of 9mm ammo. 😀
—
Reply to this email directly, view it on GitHub
<#713 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AIIW7WIOZYQT4BWGPUTBBMD25EKV3AVCNFSM6AAAAAB3P5KAQCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMBVGQ2TMOI>
.
You are receiving this because you commented.Message ID:
<PlummersSoftwareLLC/NightDriverStrip/repo-discussions/713/comments/13054569
@github.com>
|
Beta Was this translation helpful? Give feedback.
-
|
Sorry, don't shoot .38. How about some 500 Magnum? 2 rounds. 😀 |
Beta Was this translation helpful? Give feedback.
-
Has anyone done a 3D printed case/frame for the Mesmerizer?
Beta Was this translation helpful? Give feedback.
All reactions