diff --git a/index.json b/index.json index b2cb264..97a23f0 100644 --- a/index.json +++ b/index.json @@ -1,6 +1,6 @@ { "version": "1.0", - "updatedAt": "2026-04-14T06:02:48.849Z", + "updatedAt": "2026-04-14T07:14:23.057Z", "materials": [ "Fiberon ASA-CF08", "Fiberon PA12-CF10", @@ -82,7 +82,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon ASA-CF08/BBL/P2S/BambuStudio/Fiberon ASA-CF08 @BBL P2S.json", "filename": "Fiberon ASA-CF08 @BBL P2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -98,7 +98,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PA12-CF10/BBL/H2D/BambuStudio/Fiberon PA12-CF10 @BBL H2D.json", "filename": "Fiberon PA12-CF10 @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -114,7 +114,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PA12-CF10/BBL/X1/BambuStudio/Fiberon PA12-CF10 @BBL X1.json", "filename": "Fiberon PA12-CF10 @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -145,7 +145,7 @@ "slicer": "Orcaslicer", "path": "preset/Fiberon PA12-CF10/BBL/X1/Orcaslicer/Fiberon PA12-CF10 @BBL X1.json", "filename": "Fiberon PA12-CF10 @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -176,7 +176,7 @@ "slicer": "OrcaSlicer", "path": "preset/Fiberon PA6-CF20/Anycubic/Kobra S1/OrcaSlicer/Fiberon PA6-CF20 @Anycubic Kobra S1.json", "filename": "Fiberon PA6-CF20 @Anycubic Kobra S1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Anycubic", @@ -192,7 +192,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PA6-CF20/BBL/H2D/BambuStudio/Fiberon PA6-CF20 @BBL H2D.json", "filename": "Fiberon PA6-CF20 @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -208,7 +208,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PA6-CF20/BBL/X1/BambuStudio/Fiberon PA6-CF20 @BBL X1.json", "filename": "Fiberon PA6-CF20 @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -239,7 +239,7 @@ "slicer": "Orcaslicer", "path": "preset/Fiberon PA6-CF20/BBL/X1/Orcaslicer/Fiberon PA6-CF20 @BBL X1.json", "filename": "Fiberon PA6-CF20 @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -270,7 +270,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PA6-GF25/BBL/H2D/BambuStudio/Fiberon PA6-GF25 @BBL H2D.json", "filename": "Fiberon PA6-GF25 @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -286,7 +286,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PA6-GF25/BBL/X1/BambuStudio/Fiberon PA6-GF25 @BBL X1.json", "filename": "Fiberon PA6-GF25 @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -317,7 +317,7 @@ "slicer": "Orcaslicer", "path": "preset/Fiberon PA6-GF25/BBL/X1/Orcaslicer/Fiberon PA6-GF25 @BBL X1.json", "filename": "Fiberon PA6-GF25 @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -348,7 +348,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PA612-CF15/BBL/H2D/BambuStudio/Fiberon PA612-CF15 @BBL H2D.json", "filename": "Fiberon PA612-CF15 @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -364,7 +364,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PA612-CF15/BBL/X1/BambuStudio/Fiberon PA612-CF15 @BBL X1.json", "filename": "Fiberon PA612-CF15 @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -395,7 +395,7 @@ "slicer": "Orcaslicer", "path": "preset/Fiberon PA612-CF15/BBL/X1/Orcaslicer/Fiberon PA612-CF15 @BBL X1.json", "filename": "Fiberon PA612-CF15 @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -426,7 +426,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PET-CF17/BBL/H2D/BambuStudio/Fiberon PET-CF17 @BBL H2D.json", "filename": "Fiberon PET-CF17 @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -442,7 +442,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PET-CF17/BBL/X1/BambuStudio/Fiberon PET-CF17 @BBL X1.json", "filename": "Fiberon PET-CF17 @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -473,7 +473,7 @@ "slicer": "Orcaslicer", "path": "preset/Fiberon PET-CF17/BBL/X1/Orcaslicer/Fiberon PET-CF17 @BBL X1.json", "filename": "Fiberon PET-CF17 @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -504,7 +504,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PETG-ESD/BBL/H2D/BambuStudio/Fiberon PETG-ESD @BBL H2D.json", "filename": "Fiberon PETG-ESD @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -520,7 +520,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PETG-ESD/BBL/X1/BambuStudio/Fiberon PETG-ESD @BBL X1.json", "filename": "Fiberon PETG-ESD @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -551,7 +551,7 @@ "slicer": "Orcaslicer", "path": "preset/Fiberon PETG-ESD/BBL/X1/Orcaslicer/Fiberon PETG-ESD @BBL X1.json", "filename": "Fiberon PETG-ESD @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -582,7 +582,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PETG-rCF08/BBL/H2D/BambuStudio/Fiberon PETG-rCF08 @BBL H2D.json", "filename": "Fiberon PETG-rCF08 @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -598,7 +598,7 @@ "slicer": "BambuStudio", "path": "preset/Fiberon PETG-rCF08/BBL/X1/BambuStudio/Fiberon PETG-rCF08 @BBL X1.json", "filename": "Fiberon PETG-rCF08 @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -629,7 +629,7 @@ "slicer": "Orcaslicer", "path": "preset/Fiberon PETG-rCF08/BBL/X1/Orcaslicer/Fiberon PETG-rCF08 @BBL X1.json", "filename": "Fiberon PETG-rCF08 @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -660,7 +660,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma CoPE/BBL/A1/BambuStudio/Panchroma CoPE @BBL A1.json", "filename": "Panchroma CoPE @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -681,7 +681,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma CoPE/BBL/A1/Orcaslicer/Panchroma CoPE @BBL A1.json", "filename": "Panchroma CoPE @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -702,7 +702,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma CoPE/BBL/A1M/BambuStudio/Panchroma CoPE @BBL A1M.json", "filename": "Panchroma CoPE @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -723,7 +723,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma CoPE/BBL/A1M/Orcaslicer/Panchroma CoPE @BBL A1M.json", "filename": "Panchroma CoPE @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -744,7 +744,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma CoPE/BBL/H2C/BambuStudio/Panchroma CoPE @BBL H2C.json", "filename": "Panchroma CoPE @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -760,7 +760,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma CoPE/BBL/H2D/BambuStudio/Panchroma CoPE @BBL H2D.json", "filename": "Panchroma CoPE @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -769,6 +769,22 @@ } ] }, + { + "material": "Panchroma CoPE", + "brand": "BBL", + "model": "H2S", + "slicer": "BambuStudio", + "path": "preset/Panchroma CoPE/BBL/H2S/BambuStudio/Panchroma CoPE @BBL H2S.json", + "filename": "Panchroma CoPE @BBL H2S.json", + "updatedAt": "2026-04-14T15:04:49+08:00", + "compatiblePrinters": [ + { + "brand": "BBL", + "model": "H2S", + "fullName": "Bambu Lab H2S 0.4 nozzle" + } + ] + }, { "material": "Panchroma CoPE", "brand": "BBL", @@ -776,7 +792,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma CoPE/BBL/P1P/BambuStudio/Panchroma CoPE @BBL P1P.json", "filename": "Panchroma CoPE @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -792,7 +808,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma CoPE/BBL/P1P/Orcaslicer/Panchroma CoPE @BBL P1P.json", "filename": "Panchroma CoPE @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -824,7 +840,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma CoPE/BBL/X1/BambuStudio/Panchroma CoPE @BBL X1.json", "filename": "Panchroma CoPE @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -855,7 +871,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma CoPE/BBL/X1/Orcaslicer/Panchroma CoPE @BBL X1.json", "filename": "Panchroma CoPE @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -886,7 +902,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma CoPE/Elegoo/CC2/ElegooSlicer/Panchroma CoPE @Elegoo CC2.json", "filename": "Panchroma CoPE @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -902,7 +918,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma CoPE/Snapmaker/U1/OrcaSlicer/Panchroma CoPE @Snapmaker U1.json", "filename": "Panchroma CoPE @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -918,7 +934,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA/BBL/H2C/BambuStudio/Panchroma PLA @BBL H2C.json", "filename": "Panchroma PLA @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -934,7 +950,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA/BBL/H2S/BambuStudio/Panchroma PLA @BBL H2S.json", "filename": "Panchroma PLA @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -966,7 +982,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA/Elegoo/CC2/ElegooSlicer/Panchroma PLA @Elegoo CC2.json", "filename": "Panchroma PLA @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -982,7 +998,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Celestial/BBL/A1/BambuStudio/Panchroma PLA Celestial @BBL A1.json", "filename": "Panchroma PLA Celestial @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1003,7 +1019,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Celestial/BBL/A1/Orcaslicer/Panchroma PLA Celestial @BBL A1.json", "filename": "Panchroma PLA Celestial @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1024,7 +1040,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Celestial/BBL/A1M/BambuStudio/Panchroma PLA Celestial @BBL A1M.json", "filename": "Panchroma PLA Celestial @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1045,7 +1061,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Celestial/BBL/A1M/Orcaslicer/Panchroma PLA Celestial @BBL A1M.json", "filename": "Panchroma PLA Celestial @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1066,7 +1082,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Celestial/BBL/H2C/BambuStudio/Panchroma PLA Celestial @BBL H2C.json", "filename": "Panchroma PLA Celestial @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1082,7 +1098,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Celestial/BBL/H2D/BambuStudio/Panchroma PLA Celestial @BBL H2D.json", "filename": "Panchroma PLA Celestial @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1098,7 +1114,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Celestial/BBL/H2S/BambuStudio/Panchroma PLA Celestial @BBL H2S.json", "filename": "Panchroma PLA Celestial @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1114,7 +1130,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Celestial/BBL/P1P/BambuStudio/Panchroma PLA Celestial @BBL P1P.json", "filename": "Panchroma PLA Celestial @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1130,7 +1146,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Celestial/BBL/P1P/Orcaslicer/Panchroma PLA Celestial @BBL P1P.json", "filename": "Panchroma PLA Celestial @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1162,7 +1178,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Celestial/BBL/X1/BambuStudio/Panchroma PLA Celestial @BBL X1.json", "filename": "Panchroma PLA Celestial @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1193,7 +1209,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Celestial/BBL/X1/Orcaslicer/Panchroma PLA Celestial @BBL X1.json", "filename": "Panchroma PLA Celestial @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1224,7 +1240,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA Celestial/Elegoo/CC2/ElegooSlicer/Panchroma PLA Celestial @Elegoo CC2.json", "filename": "Panchroma PLA Celestial @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -1240,7 +1256,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA Celestial/Snapmaker/U1/OrcaSlicer/Panchroma PLA Celestial @Snapmaker U1.json", "filename": "Panchroma PLA Celestial @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -1256,7 +1272,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Galaxy/BBL/A1/BambuStudio/Panchroma PLA Galaxy @BBL A1.json", "filename": "Panchroma PLA Galaxy @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1277,7 +1293,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Galaxy/BBL/A1/Orcaslicer/Panchroma PLA Galaxy @BBL A1.json", "filename": "Panchroma PLA Galaxy @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1298,7 +1314,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Galaxy/BBL/A1M/BambuStudio/Panchroma PLA Galaxy @BBL A1M.json", "filename": "Panchroma PLA Galaxy @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1319,7 +1335,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Galaxy/BBL/A1M/Orcaslicer/Panchroma PLA Galaxy @BBL A1M.json", "filename": "Panchroma PLA Galaxy @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1340,7 +1356,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Galaxy/BBL/H2C/BambuStudio/Panchroma PLA Galaxy @BBL H2C.json", "filename": "Panchroma PLA Galaxy @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1356,7 +1372,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Galaxy/BBL/H2D/BambuStudio/Panchroma PLA Galaxy @BBL H2D.json", "filename": "Panchroma PLA Galaxy @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1372,7 +1388,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Galaxy/BBL/H2S/BambuStudio/Panchroma PLA Galaxy @BBL H2S.json", "filename": "Panchroma PLA Galaxy @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1388,7 +1404,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Galaxy/BBL/P1P/BambuStudio/Panchroma PLA Galaxy @BBL P1P.json", "filename": "Panchroma PLA Galaxy @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1404,7 +1420,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Galaxy/BBL/P1P/Orcaslicer/Panchroma PLA Galaxy @BBL P1P.json", "filename": "Panchroma PLA Galaxy @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1436,7 +1452,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Galaxy/BBL/X1/BambuStudio/Panchroma PLA Galaxy @BBL X1.json", "filename": "Panchroma PLA Galaxy @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1467,7 +1483,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Galaxy/BBL/X1/Orcaslicer/Panchroma PLA Galaxy @BBL X1.json", "filename": "Panchroma PLA Galaxy @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1498,7 +1514,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA Galaxy/Elegoo/CC2/ElegooSlicer/Panchroma PLA Galaxy @Elegoo CC2.json", "filename": "Panchroma PLA Galaxy @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -1514,7 +1530,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA Galaxy/Snapmaker/U1/OrcaSlicer/Panchroma PLA Galaxy @Snapmaker U1.json", "filename": "Panchroma PLA Galaxy @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -1530,7 +1546,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Glow/BBL/A1/BambuStudio/Panchroma PLA Glow @BBL A1.json", "filename": "Panchroma PLA Glow @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1551,7 +1567,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Glow/BBL/A1/Orcaslicer/Panchroma PLA Glow @BBL A1.json", "filename": "Panchroma PLA Glow @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1572,7 +1588,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Glow/BBL/A1M/BambuStudio/Panchroma PLA Glow @BBL A1M.json", "filename": "Panchroma PLA Glow @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1593,7 +1609,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Glow/BBL/A1M/Orcaslicer/Panchroma PLA Glow @BBL A1M.json", "filename": "Panchroma PLA Glow @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1614,7 +1630,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Glow/BBL/H2C/BambuStudio/Panchroma PLA Glow @BBL H2C.json", "filename": "Panchroma PLA Glow @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1630,7 +1646,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Glow/BBL/H2D/BambuStudio/Panchroma PLA Glow @BBL H2D.json", "filename": "Panchroma PLA Glow @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1646,7 +1662,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Glow/BBL/H2S/BambuStudio/Panchroma PLA Glow @BBL H2S.json", "filename": "Panchroma PLA Glow @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1662,7 +1678,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Glow/BBL/P1P/BambuStudio/Panchroma PLA Glow @BBL P1P.json", "filename": "Panchroma PLA Glow @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1678,7 +1694,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Glow/BBL/P1P/Orcaslicer/Panchroma PLA Glow @BBL P1P.json", "filename": "Panchroma PLA Glow @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1710,7 +1726,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Glow/BBL/X1/BambuStudio/Panchroma PLA Glow @BBL X1.json", "filename": "Panchroma PLA Glow @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1741,7 +1757,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Glow/BBL/X1/Orcaslicer/Panchroma PLA Glow @BBL X1.json", "filename": "Panchroma PLA Glow @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1772,7 +1788,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA Glow/Elegoo/CC2/ElegooSlicer/Panchroma PLA Glow @Elegoo CC2.json", "filename": "Panchroma PLA Glow @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -1788,7 +1804,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA Glow/Snapmaker/U1/OrcaSlicer/Panchroma PLA Glow @Snapmaker U1.json", "filename": "Panchroma PLA Glow @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -1804,7 +1820,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Luminous/BBL/A1/BambuStudio/Panchroma PLA Luminous @BBL A1.json", "filename": "Panchroma PLA Luminous @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1825,7 +1841,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Luminous/BBL/A1/Orcaslicer/Panchroma PLA Luminous @BBL A1.json", "filename": "Panchroma PLA Luminous @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1846,7 +1862,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Luminous/BBL/A1M/BambuStudio/Panchroma PLA Luminous @BBL A1M.json", "filename": "Panchroma PLA Luminous @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1867,7 +1883,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Luminous/BBL/A1M/Orcaslicer/Panchroma PLA Luminous @BBL A1M.json", "filename": "Panchroma PLA Luminous @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1888,7 +1904,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Luminous/BBL/H2C/BambuStudio/Panchroma PLA Luminous @BBL H2C.json", "filename": "Panchroma PLA Luminous @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1904,7 +1920,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Luminous/BBL/H2D/BambuStudio/Panchroma PLA Luminous @BBL H2D.json", "filename": "Panchroma PLA Luminous @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1920,7 +1936,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Luminous/BBL/H2S/BambuStudio/Panchroma PLA Luminous @BBL H2S.json", "filename": "Panchroma PLA Luminous @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1936,7 +1952,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Luminous/BBL/P1P/BambuStudio/Panchroma PLA Luminous @BBL P1P.json", "filename": "Panchroma PLA Luminous @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1952,7 +1968,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Luminous/BBL/P1P/Orcaslicer/Panchroma PLA Luminous @BBL P1P.json", "filename": "Panchroma PLA Luminous @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -1984,7 +2000,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Luminous/BBL/X1/BambuStudio/Panchroma PLA Luminous @BBL X1.json", "filename": "Panchroma PLA Luminous @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2015,7 +2031,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Luminous/BBL/X1/Orcaslicer/Panchroma PLA Luminous @BBL X1.json", "filename": "Panchroma PLA Luminous @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2046,7 +2062,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA Luminous/Elegoo/CC2/ElegooSlicer/Panchroma PLA Luminous @Elegoo CC2.json", "filename": "Panchroma PLA Luminous @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -2062,7 +2078,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA Luminous/Snapmaker/U1/OrcaSlicer/Panchroma PLA Luminous @Snapmaker U1.json", "filename": "Panchroma PLA Luminous @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -2078,7 +2094,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Marble/BBL/A1/BambuStudio/Panchroma PLA Marble @BBL A1.json", "filename": "Panchroma PLA Marble @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2099,7 +2115,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Marble/BBL/A1/Orcaslicer/Panchroma PLA Marble @BBL A1.json", "filename": "Panchroma PLA Marble @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2120,7 +2136,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Marble/BBL/A1M/BambuStudio/Panchroma PLA Marble @BBL A1M.json", "filename": "Panchroma PLA Marble @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2141,7 +2157,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Marble/BBL/A1M/Orcaslicer/Panchroma PLA Marble @BBL A1M.json", "filename": "Panchroma PLA Marble @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2162,7 +2178,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Marble/BBL/H2C/BambuStudio/Panchroma PLA Marble @BBL H2C.json", "filename": "Panchroma PLA Marble @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2178,7 +2194,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Marble/BBL/P1P/BambuStudio/Panchroma PLA Marble @BBL P1P.json", "filename": "Panchroma PLA Marble @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2194,7 +2210,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Marble/BBL/P1P/Orcaslicer/Panchroma PLA Marble @BBL P1P.json", "filename": "Panchroma PLA Marble @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2226,7 +2242,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Marble/BBL/X1/BambuStudio/Panchroma PLA Marble @BBL X1.json", "filename": "Panchroma PLA Marble @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2257,7 +2273,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Marble/BBL/X1/Orcaslicer/Panchroma PLA Marble @BBL X1.json", "filename": "Panchroma PLA Marble @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2288,7 +2304,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA Marble/Elegoo/CC2/ElegooSlicer/Panchroma PLA Marble @Elegoo CC2.json", "filename": "Panchroma PLA Marble @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -2304,7 +2320,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA Marble/Snapmaker/U1/OrcaSlicer/Panchroma PLA Marble @Snapmaker U1.json", "filename": "Panchroma PLA Marble @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -2320,7 +2336,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Matte/BBL/A1/BambuStudio/Panchroma PLA Matte @BBL A1.json", "filename": "Panchroma PLA Matte @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2341,7 +2357,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Matte/BBL/A1/Orcaslicer/Panchroma PLA Matte @BBL A1.json", "filename": "Panchroma PLA Matte @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2362,7 +2378,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Matte/BBL/A1M/BambuStudio/Panchroma PLA Matte @BBL A1M.json", "filename": "Panchroma PLA Matte @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2383,7 +2399,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Matte/BBL/A1M/Orcaslicer/Panchroma PLA Matte @BBL A1M.json", "filename": "Panchroma PLA Matte @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2404,7 +2420,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Matte/BBL/H2C/BambuStudio/Panchroma PLA Matte @BBL H2C.json", "filename": "Panchroma PLA Matte @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2420,7 +2436,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Matte/BBL/P1P/BambuStudio/Panchroma PLA Matte @BBL P1P.json", "filename": "Panchroma PLA Matte @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2436,7 +2452,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Matte/BBL/P1P/Orcaslicer/Panchroma PLA Matte @BBL P1P.json", "filename": "Panchroma PLA Matte @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2468,7 +2484,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Matte/BBL/X1/BambuStudio/Panchroma PLA Matte @BBL X1.json", "filename": "Panchroma PLA Matte @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2499,7 +2515,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Matte/BBL/X1/Orcaslicer/Panchroma PLA Matte @BBL X1.json", "filename": "Panchroma PLA Matte @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2530,7 +2546,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA Matte/Elegoo/CC2/ElegooSlicer/Panchroma PLA Matte @Elegoo CC2.json", "filename": "Panchroma PLA Matte @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -2546,7 +2562,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA Matte/Snapmaker/U1/OrcaSlicer/Panchroma PLA Matte @Snapmaker U1.json", "filename": "Panchroma PLA Matte @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -2562,7 +2578,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Metallic/BBL/A1/BambuStudio/Panchroma PLA Metallic @BBL A1.json", "filename": "Panchroma PLA Metallic @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2583,7 +2599,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Metallic/BBL/A1/Orcaslicer/Panchroma PLA Metallic @BBL A1.json", "filename": "Panchroma PLA Metallic @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2604,7 +2620,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Metallic/BBL/A1M/BambuStudio/Panchroma PLA Metallic @BBL A1M.json", "filename": "Panchroma PLA Metallic @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2625,7 +2641,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Metallic/BBL/A1M/Orcaslicer/Panchroma PLA Metallic @BBL A1M.json", "filename": "Panchroma PLA Metallic @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2646,7 +2662,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Metallic/BBL/H2C/BambuStudio/Panchroma PLA Metallic @BBL H2C.json", "filename": "Panchroma PLA Metallic @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2662,7 +2678,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Metallic/BBL/H2D/BambuStudio/Panchroma PLA Metallic @BBL H2D.json", "filename": "Panchroma PLA Metallic @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2678,7 +2694,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Metallic/BBL/H2S/BambuStudio/Panchroma PLA Metallic @BBL H2S.json", "filename": "Panchroma PLA Metallic @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2694,7 +2710,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Metallic/BBL/P1P/BambuStudio/Panchroma PLA Metallic @BBL P1P.json", "filename": "Panchroma PLA Metallic @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2710,7 +2726,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Metallic/BBL/P1P/Orcaslicer/Panchroma PLA Metallic @BBL P1P.json", "filename": "Panchroma PLA Metallic @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2742,7 +2758,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Metallic/BBL/X1/BambuStudio/Panchroma PLA Metallic @BBL X1.json", "filename": "Panchroma PLA Metallic @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2773,7 +2789,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Metallic/BBL/X1/Orcaslicer/Panchroma PLA Metallic @BBL X1.json", "filename": "Panchroma PLA Metallic @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2804,7 +2820,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA Metallic/Elegoo/CC2/ElegooSlicer/Panchroma PLA Metallic @Elegoo CC2.json", "filename": "Panchroma PLA Metallic @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -2820,7 +2836,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA Metallic/Snapmaker/U1/OrcaSlicer/Panchroma PLA Metallic @Snapmaker U1.json", "filename": "Panchroma PLA Metallic @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -2836,7 +2852,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Neon/BBL/A1/BambuStudio/Panchroma PLA Neon @BBL A1.json", "filename": "Panchroma PLA Neon @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2857,7 +2873,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Neon/BBL/A1/Orcaslicer/Panchroma PLA Neon @BBL A1.json", "filename": "Panchroma PLA Neon @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2878,7 +2894,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Neon/BBL/A1M/BambuStudio/Panchroma PLA Neon @BBL A1M.json", "filename": "Panchroma PLA Neon @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2899,7 +2915,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Neon/BBL/A1M/Orcaslicer/Panchroma PLA Neon @BBL A1M.json", "filename": "Panchroma PLA Neon @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2920,7 +2936,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Neon/BBL/H2C/BambuStudio/Panchroma PLA Neon @BBL H2C.json", "filename": "Panchroma PLA Neon @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2936,7 +2952,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Neon/BBL/H2D/BambuStudio/Panchroma PLA Neon @BBL H2D.json", "filename": "Panchroma PLA Neon @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2952,7 +2968,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Neon/BBL/H2S/BambuStudio/Panchroma PLA Neon @BBL H2S.json", "filename": "Panchroma PLA Neon @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2968,7 +2984,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Neon/BBL/P1P/BambuStudio/Panchroma PLA Neon @BBL P1P.json", "filename": "Panchroma PLA Neon @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -2984,7 +3000,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Neon/BBL/P1P/Orcaslicer/Panchroma PLA Neon @BBL P1P.json", "filename": "Panchroma PLA Neon @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3016,7 +3032,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Neon/BBL/X1/BambuStudio/Panchroma PLA Neon @BBL X1.json", "filename": "Panchroma PLA Neon @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3047,7 +3063,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Neon/BBL/X1/Orcaslicer/Panchroma PLA Neon @BBL X1.json", "filename": "Panchroma PLA Neon @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3078,7 +3094,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA Neon/Elegoo/CC2/ElegooSlicer/Panchroma PLA Neon @Elegoo CC2.json", "filename": "Panchroma PLA Neon @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -3094,7 +3110,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA Neon/Snapmaker/U1/OrcaSlicer/Panchroma PLA Neon @Snapmaker U1.json", "filename": "Panchroma PLA Neon @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -3110,7 +3126,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Satin/BBL/A1/BambuStudio/Panchroma PLA Satin @BBL A1.json", "filename": "Panchroma PLA Satin @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3131,7 +3147,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Satin/BBL/A1/Orcaslicer/Panchroma PLA Satin @BBL A1.json", "filename": "Panchroma PLA Satin @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3152,7 +3168,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Satin/BBL/A1M/BambuStudio/Panchroma PLA Satin @BBL A1M.json", "filename": "Panchroma PLA Satin @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3173,7 +3189,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Satin/BBL/A1M/Orcaslicer/Panchroma PLA Satin @BBL A1M.json", "filename": "Panchroma PLA Satin @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3194,7 +3210,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Satin/BBL/H2C/BambuStudio/Panchroma PLA Satin @BBL H2C.json", "filename": "Panchroma PLA Satin @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3210,7 +3226,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Satin/BBL/H2S/BambuStudio/Panchroma PLA Satin @BBL H2S.json", "filename": "Panchroma PLA Satin @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3226,7 +3242,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Satin/BBL/P1P/BambuStudio/Panchroma PLA Satin @BBL P1P.json", "filename": "Panchroma PLA Satin @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3242,7 +3258,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Satin/BBL/P1P/Orcaslicer/Panchroma PLA Satin @BBL P1P.json", "filename": "Panchroma PLA Satin @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3274,7 +3290,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Satin/BBL/X1/BambuStudio/Panchroma PLA Satin @BBL X1.json", "filename": "Panchroma PLA Satin @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3305,7 +3321,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Satin/BBL/X1/Orcaslicer/Panchroma PLA Satin @BBL X1.json", "filename": "Panchroma PLA Satin @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3336,7 +3352,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA Satin/Elegoo/CC2/ElegooSlicer/Panchroma PLA Satin @Elegoo CC2.json", "filename": "Panchroma PLA Satin @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -3352,7 +3368,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA Satin/Snapmaker/U1/OrcaSlicer/Panchroma PLA Satin @Snapmaker U1.json", "filename": "Panchroma PLA Satin @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -3368,7 +3384,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Silk/BBL/A1/BambuStudio/Panchroma PLA Silk @BBL A1.json", "filename": "Panchroma PLA Silk @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3389,7 +3405,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Silk/BBL/A1/Orcaslicer/Panchroma PLA Silk @BBL A1.json", "filename": "Panchroma PLA Silk @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3410,7 +3426,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Silk/BBL/A1M/BambuStudio/Panchroma PLA Silk @BBL A1M.json", "filename": "Panchroma PLA Silk @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3431,7 +3447,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Silk/BBL/A1M/Orcaslicer/Panchroma PLA Silk @BBL A1M.json", "filename": "Panchroma PLA Silk @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3452,7 +3468,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Silk/BBL/H2C/BambuStudio/Panchroma PLA Silk @BBL H2C.json", "filename": "Panchroma PLA Silk @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3468,7 +3484,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Silk/BBL/H2D/BambuStudio/Panchroma PLA Silk @BBL H2D.json", "filename": "Panchroma PLA Silk @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3484,7 +3500,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Silk/BBL/P1P/BambuStudio/Panchroma PLA Silk @BBL P1P.json", "filename": "Panchroma PLA Silk @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3500,7 +3516,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Silk/BBL/P1P/Orcaslicer/Panchroma PLA Silk @BBL P1P.json", "filename": "Panchroma PLA Silk @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3532,7 +3548,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Silk/BBL/X1/BambuStudio/Panchroma PLA Silk @BBL X1.json", "filename": "Panchroma PLA Silk @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3563,7 +3579,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Silk/BBL/X1/Orcaslicer/Panchroma PLA Silk @BBL X1.json", "filename": "Panchroma PLA Silk @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3594,7 +3610,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA Silk/Elegoo/CC2/ElegooSlicer/Panchroma PLA Silk @Elegoo CC2.json", "filename": "Panchroma PLA Silk @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -3610,7 +3626,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA Silk/Snapmaker/U1/OrcaSlicer/Panchroma PLA Silk @Snapmaker U1.json", "filename": "Panchroma PLA Silk @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -3626,7 +3642,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Starlight/BBL/A1/BambuStudio/Panchroma PLA Starlight @BBL A1.json", "filename": "Panchroma PLA Starlight @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3647,7 +3663,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Starlight/BBL/A1/Orcaslicer/Panchroma PLA Starlight @BBL A1.json", "filename": "Panchroma PLA Starlight @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3668,7 +3684,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Starlight/BBL/A1M/BambuStudio/Panchroma PLA Starlight @BBL A1M.json", "filename": "Panchroma PLA Starlight @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3689,7 +3705,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Starlight/BBL/A1M/Orcaslicer/Panchroma PLA Starlight @BBL A1M.json", "filename": "Panchroma PLA Starlight @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3710,7 +3726,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Starlight/BBL/H2C/BambuStudio/Panchroma PLA Starlight @BBL H2C.json", "filename": "Panchroma PLA Starlight @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3726,7 +3742,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Starlight/BBL/H2D/BambuStudio/Panchroma PLA Starlight @BBL H2D.json", "filename": "Panchroma PLA Starlight @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3742,7 +3758,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Starlight/BBL/H2S/BambuStudio/Panchroma PLA Starlight @BBL H2S.json", "filename": "Panchroma PLA Starlight @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3758,7 +3774,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Starlight/BBL/P1P/BambuStudio/Panchroma PLA Starlight @BBL P1P.json", "filename": "Panchroma PLA Starlight @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3774,7 +3790,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Starlight/BBL/P1P/Orcaslicer/Panchroma PLA Starlight @BBL P1P.json", "filename": "Panchroma PLA Starlight @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3806,7 +3822,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Starlight/BBL/X1/BambuStudio/Panchroma PLA Starlight @BBL X1.json", "filename": "Panchroma PLA Starlight @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3837,7 +3853,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Starlight/BBL/X1/Orcaslicer/Panchroma PLA Starlight @BBL X1.json", "filename": "Panchroma PLA Starlight @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3868,7 +3884,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA Starlight/Elegoo/CC2/ElegooSlicer/Panchroma PLA Starlight @Elegoo CC2.json", "filename": "Panchroma PLA Starlight @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -3884,7 +3900,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA Starlight/Snapmaker/U1/OrcaSlicer/Panchroma PLA Starlight @Snapmaker U1.json", "filename": "Panchroma PLA Starlight @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -3900,7 +3916,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Translucent/BBL/A1/BambuStudio/Panchroma PLA Translucent @BBL A1.json", "filename": "Panchroma PLA Translucent @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3921,7 +3937,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Translucent/BBL/A1/Orcaslicer/Panchroma PLA Translucent @BBL A1.json", "filename": "Panchroma PLA Translucent @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3942,7 +3958,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Translucent/BBL/A1M/BambuStudio/Panchroma PLA Translucent @BBL A1M.json", "filename": "Panchroma PLA Translucent @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3963,7 +3979,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Translucent/BBL/A1M/Orcaslicer/Panchroma PLA Translucent @BBL A1M.json", "filename": "Panchroma PLA Translucent @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -3984,7 +4000,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Translucent/BBL/H2C/BambuStudio/Panchroma PLA Translucent @BBL H2C.json", "filename": "Panchroma PLA Translucent @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4000,7 +4016,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Translucent/BBL/H2D/BambuStudio/Panchroma PLA Translucent @BBL H2D.json", "filename": "Panchroma PLA Translucent @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4016,7 +4032,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Translucent/BBL/H2S/BambuStudio/Panchroma PLA Translucent @BBL H2S.json", "filename": "Panchroma PLA Translucent @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4032,7 +4048,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Translucent/BBL/P1P/BambuStudio/Panchroma PLA Translucent @BBL P1P.json", "filename": "Panchroma PLA Translucent @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4048,7 +4064,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Translucent/BBL/P1P/Orcaslicer/Panchroma PLA Translucent @BBL P1P.json", "filename": "Panchroma PLA Translucent @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4080,7 +4096,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA Translucent/BBL/X1/BambuStudio/Panchroma PLA Translucent @BBL X1.json", "filename": "Panchroma PLA Translucent @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4111,7 +4127,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA Translucent/BBL/X1/Orcaslicer/Panchroma PLA Translucent @BBL X1.json", "filename": "Panchroma PLA Translucent @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4142,7 +4158,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA Translucent/Elegoo/CC2/ElegooSlicer/Panchroma PLA Translucent @Elegoo CC2.json", "filename": "Panchroma PLA Translucent @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -4158,7 +4174,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA Translucent/Snapmaker/U1/OrcaSlicer/Panchroma PLA Translucent @Snapmaker U1.json", "filename": "Panchroma PLA Translucent @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -4174,7 +4190,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA UV Shift/BBL/A1/BambuStudio/Panchroma PLA UV Shift @BBL A1.json", "filename": "Panchroma PLA UV Shift @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4195,7 +4211,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA UV Shift/BBL/A1/Orcaslicer/Panchroma PLA UV Shift @BBL A1.json", "filename": "Panchroma PLA UV Shift @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4216,7 +4232,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA UV Shift/BBL/A1M/BambuStudio/Panchroma PLA UV Shift @BBL A1M.json", "filename": "Panchroma PLA UV Shift @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4237,7 +4253,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA UV Shift/BBL/A1M/Orcaslicer/Panchroma PLA UV Shift @BBL A1M.json", "filename": "Panchroma PLA UV Shift @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4258,7 +4274,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA UV Shift/BBL/H2C/BambuStudio/Panchroma PLA UV Shift @BBL H2C.json", "filename": "Panchroma PLA UV Shift @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4274,7 +4290,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA UV Shift/BBL/H2D/BambuStudio/Panchroma PLA UV Shift @BBL H2D.json", "filename": "Panchroma PLA UV Shift @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4290,7 +4306,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA UV Shift/BBL/H2S/BambuStudio/Panchroma PLA UV Shift @BBL H2S.json", "filename": "Panchroma PLA UV Shift @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4306,7 +4322,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA UV Shift/BBL/P1P/BambuStudio/Panchroma PLA UV Shift @BBL P1P.json", "filename": "Panchroma PLA UV Shift @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4322,7 +4338,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA UV Shift/BBL/P1P/Orcaslicer/Panchroma PLA UV Shift @BBL P1P.json", "filename": "Panchroma PLA UV Shift @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4354,7 +4370,7 @@ "slicer": "BambuStudio", "path": "preset/Panchroma PLA UV Shift/BBL/X1/BambuStudio/Panchroma PLA UV Shift @BBL X1.json", "filename": "Panchroma PLA UV Shift @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4385,7 +4401,7 @@ "slicer": "Orcaslicer", "path": "preset/Panchroma PLA UV Shift/BBL/X1/Orcaslicer/Panchroma PLA UV Shift @BBL X1.json", "filename": "Panchroma PLA UV Shift @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4416,7 +4432,7 @@ "slicer": "ElegooSlicer", "path": "preset/Panchroma PLA UV Shift/Elegoo/CC2/ElegooSlicer/Panchroma PLA UV Shift @Elegoo CC2.json", "filename": "Panchroma PLA UV Shift @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -4432,7 +4448,7 @@ "slicer": "OrcaSlicer", "path": "preset/Panchroma PLA UV Shift/Snapmaker/U1/OrcaSlicer/Panchroma PLA UV Shift @Snapmaker U1.json", "filename": "Panchroma PLA UV Shift @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -4448,7 +4464,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite CosPLA/BBL/A1/BambuStudio/PolyLite CosPLA @BBL A1.json", "filename": "PolyLite CosPLA @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4469,7 +4485,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite CosPLA/BBL/A1/Orcaslicer/PolyLite CosPLA @BBL A1.json", "filename": "PolyLite CosPLA @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4490,7 +4506,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite CosPLA/BBL/A1M/BambuStudio/PolyLite CosPLA @BBL A1M.json", "filename": "PolyLite CosPLA @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4511,7 +4527,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite CosPLA/BBL/A1M/Orcaslicer/PolyLite CosPLA @BBL A1M.json", "filename": "PolyLite CosPLA @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4532,7 +4548,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite CosPLA/BBL/H2C/BambuStudio/PolyLite CosPLA @BBL H2C.json", "filename": "PolyLite CosPLA @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4548,7 +4564,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite CosPLA/BBL/H2S/BambuStudio/PolyLite CosPLA @BBL H2S.json", "filename": "PolyLite CosPLA @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4564,7 +4580,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite CosPLA/BBL/P1P/BambuStudio/PolyLite CosPLA @BBL P1P.json", "filename": "PolyLite CosPLA @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4580,7 +4596,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite CosPLA/BBL/P1P/Orcaslicer/PolyLite CosPLA @BBL P1P.json", "filename": "PolyLite CosPLA @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4612,7 +4628,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite CosPLA/BBL/X1/BambuStudio/PolyLite CosPLA @BBL X1.json", "filename": "PolyLite CosPLA @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4643,7 +4659,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite CosPLA/BBL/X1/Orcaslicer/PolyLite CosPLA @BBL X1.json", "filename": "PolyLite CosPLA @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4674,7 +4690,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyLite CosPLA/Elegoo/CC2/ElegooSlicer/PolyLite CosPLA @Elegoo CC2.json", "filename": "PolyLite CosPLA @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -4690,7 +4706,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyLite CosPLA/Snapmaker/U1/OrcaSlicer/PolyLite CosPLA @Snapmaker U1.json", "filename": "PolyLite CosPLA @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -4699,6 +4715,22 @@ } ] }, + { + "material": "PolyLite PETG", + "brand": "Elegoo", + "model": "CC2", + "slicer": "ElegooSlicer", + "path": "preset/PolyLite PETG/Elegoo/CC2/ElegooSlicer/PolyLite PETG @Elegoo CC2.json", + "filename": "PolyLite PETG @Elegoo CC2.json", + "updatedAt": "2026-04-14T15:02:15+08:00", + "compatiblePrinters": [ + { + "brand": "Elegoo", + "model": "CC2", + "fullName": "Elegoo Centauri Carbon 2 0.4 nozzle" + } + ] + }, { "material": "PolyLite PETG", "brand": "Snapmaker", @@ -4706,7 +4738,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyLite PETG/Snapmaker/U1/OrcaSlicer/PolyLite PETG @Snapmaker U1.json", "filename": "PolyLite PETG @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -4715,6 +4747,22 @@ } ] }, + { + "material": "PolyLite PETG Translucent", + "brand": "Elegoo", + "model": "CC2", + "slicer": "ElegooSlicer", + "path": "preset/PolyLite PETG Translucent/Elegoo/CC2/ElegooSlicer/PolyLite PETG Translucent @Elegoo CC2.json", + "filename": "PolyLite PETG Translucent @Elegoo CC2.json", + "updatedAt": "2026-04-14T15:02:15+08:00", + "compatiblePrinters": [ + { + "brand": "Elegoo", + "model": "CC2", + "fullName": "Elegoo Centauri Carbon 2 0.4 nozzle" + } + ] + }, { "material": "PolyLite PETG Translucent", "brand": "Snapmaker", @@ -4722,7 +4770,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyLite PETG Translucent/Snapmaker/U1/OrcaSlicer/PolyLite PETG Translucent @Snapmaker U1.json", "filename": "PolyLite PETG Translucent @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -4738,7 +4786,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA/BBL/A1/BambuStudio/PolyLite PLA @BBL A1.json", "filename": "PolyLite PLA @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4759,7 +4807,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA/BBL/A1/Orcaslicer/PolyLite PLA @BBL A1.json", "filename": "PolyLite PLA @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4780,7 +4828,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA/BBL/A1M/BambuStudio/PolyLite PLA @BBL A1M.json", "filename": "PolyLite PLA @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4801,7 +4849,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA/BBL/A1M/Orcaslicer/PolyLite PLA @BBL A1M.json", "filename": "PolyLite PLA @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4822,7 +4870,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA/BBL/H2C/BambuStudio/PolyLite PLA @BBL H2C.json", "filename": "PolyLite PLA @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4838,7 +4886,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA/BBL/H2D/BambuStudio/PolyLite PLA @BBL H2D.json", "filename": "PolyLite PLA @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4854,7 +4902,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA/BBL/H2S/BambuStudio/PolyLite PLA @BBL H2S.json", "filename": "PolyLite PLA @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4870,7 +4918,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA/BBL/P1P/BambuStudio/PolyLite PLA @BBL P1P.json", "filename": "PolyLite PLA @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4886,7 +4934,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA/BBL/P1P/Orcaslicer/PolyLite PLA @BBL P1P.json", "filename": "PolyLite PLA @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4918,7 +4966,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA/BBL/X1/BambuStudio/PolyLite PLA @BBL X1.json", "filename": "PolyLite PLA @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4949,7 +4997,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA/BBL/X1/Orcaslicer/PolyLite PLA @BBL X1.json", "filename": "PolyLite PLA @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -4980,7 +5028,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyLite PLA/Elegoo/CC2/ElegooSlicer/PolyLite PLA @Elegoo CC2.json", "filename": "PolyLite PLA @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -4996,7 +5044,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyLite PLA/Snapmaker/U1/OrcaSlicer/PolyLite PLA @Snapmaker U1.json", "filename": "PolyLite PLA @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -5012,7 +5060,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Galaxy/BBL/A1/BambuStudio/PolyLite PLA Galaxy @BBL A1.json", "filename": "PolyLite PLA Galaxy @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5033,7 +5081,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Galaxy/BBL/A1/Orcaslicer/PolyLite PLA Galaxy @BBL A1.json", "filename": "PolyLite PLA Galaxy @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5054,7 +5102,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Galaxy/BBL/A1M/BambuStudio/PolyLite PLA Galaxy @BBL A1M.json", "filename": "PolyLite PLA Galaxy @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5075,7 +5123,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Galaxy/BBL/A1M/Orcaslicer/PolyLite PLA Galaxy @BBL A1M.json", "filename": "PolyLite PLA Galaxy @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5096,7 +5144,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Galaxy/BBL/H2C/BambuStudio/PolyLite PLA Galaxy @BBL H2C.json", "filename": "PolyLite PLA Galaxy @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5112,7 +5160,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Galaxy/BBL/H2D/BambuStudio/PolyLite PLA Galaxy @BBL H2D.json", "filename": "PolyLite PLA Galaxy @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5128,7 +5176,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Galaxy/BBL/H2S/BambuStudio/PolyLite PLA Galaxy @BBL H2S.json", "filename": "PolyLite PLA Galaxy @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5144,7 +5192,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Galaxy/BBL/P1P/BambuStudio/PolyLite PLA Galaxy @BBL P1P.json", "filename": "PolyLite PLA Galaxy @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5160,7 +5208,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Galaxy/BBL/P1P/Orcaslicer/PolyLite PLA Galaxy @BBL P1P.json", "filename": "PolyLite PLA Galaxy @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5192,7 +5240,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Galaxy/BBL/X1/BambuStudio/PolyLite PLA Galaxy @BBL X1.json", "filename": "PolyLite PLA Galaxy @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5223,7 +5271,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Galaxy/BBL/X1/Orcaslicer/PolyLite PLA Galaxy @BBL X1.json", "filename": "PolyLite PLA Galaxy @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5254,7 +5302,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyLite PLA Galaxy/Elegoo/CC2/ElegooSlicer/PolyLite PLA Galaxy @Elegoo CC2.json", "filename": "PolyLite PLA Galaxy @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -5270,7 +5318,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyLite PLA Galaxy/Snapmaker/U1/OrcaSlicer/PolyLite PLA Galaxy @Snapmaker U1.json", "filename": "PolyLite PLA Galaxy @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -5286,7 +5334,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Glow/BBL/A1/BambuStudio/PolyLite PLA Glow @BBL A1.json", "filename": "PolyLite PLA Glow @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5307,7 +5355,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Glow/BBL/A1/Orcaslicer/PolyLite PLA Glow @BBL A1.json", "filename": "PolyLite PLA Glow @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5328,7 +5376,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Glow/BBL/A1M/BambuStudio/PolyLite PLA Glow @BBL A1M.json", "filename": "PolyLite PLA Glow @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5349,7 +5397,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Glow/BBL/A1M/Orcaslicer/PolyLite PLA Glow @BBL A1M.json", "filename": "PolyLite PLA Glow @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5370,7 +5418,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Glow/BBL/H2C/BambuStudio/PolyLite PLA Glow @BBL H2C.json", "filename": "PolyLite PLA Glow @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5386,7 +5434,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Glow/BBL/H2D/BambuStudio/PolyLite PLA Glow @BBL H2D.json", "filename": "PolyLite PLA Glow @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5402,7 +5450,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Glow/BBL/H2S/BambuStudio/PolyLite PLA Glow @BBL H2S.json", "filename": "PolyLite PLA Glow @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5418,7 +5466,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Glow/BBL/P1P/BambuStudio/PolyLite PLA Glow @BBL P1P.json", "filename": "PolyLite PLA Glow @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5434,7 +5482,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Glow/BBL/P1P/Orcaslicer/PolyLite PLA Glow @BBL P1P.json", "filename": "PolyLite PLA Glow @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5466,7 +5514,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Glow/BBL/X1/BambuStudio/PolyLite PLA Glow @BBL X1.json", "filename": "PolyLite PLA Glow @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5497,7 +5545,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Glow/BBL/X1/Orcaslicer/PolyLite PLA Glow @BBL X1.json", "filename": "PolyLite PLA Glow @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5528,7 +5576,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyLite PLA Glow/Elegoo/CC2/ElegooSlicer/PolyLite PLA Glow @Elegoo CC2.json", "filename": "PolyLite PLA Glow @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -5544,7 +5592,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyLite PLA Glow/Snapmaker/U1/OrcaSlicer/PolyLite PLA Glow @Snapmaker U1.json", "filename": "PolyLite PLA Glow @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -5560,7 +5608,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Luminous/BBL/A1/BambuStudio/PolyLite PLA Luminous @BBL A1.json", "filename": "PolyLite PLA Luminous @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5581,7 +5629,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Luminous/BBL/A1/Orcaslicer/PolyLite PLA Luminous @BBL A1.json", "filename": "PolyLite PLA Luminous @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5602,7 +5650,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Luminous/BBL/A1M/BambuStudio/PolyLite PLA Luminous @BBL A1M.json", "filename": "PolyLite PLA Luminous @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5623,7 +5671,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Luminous/BBL/A1M/Orcaslicer/PolyLite PLA Luminous @BBL A1M.json", "filename": "PolyLite PLA Luminous @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5644,7 +5692,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Luminous/BBL/H2C/BambuStudio/PolyLite PLA Luminous @BBL H2C.json", "filename": "PolyLite PLA Luminous @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5660,7 +5708,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Luminous/BBL/H2D/BambuStudio/PolyLite PLA Luminous @BBL H2D.json", "filename": "PolyLite PLA Luminous @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5676,7 +5724,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Luminous/BBL/H2S/BambuStudio/PolyLite PLA Luminous @BBL H2S.json", "filename": "PolyLite PLA Luminous @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5692,7 +5740,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Luminous/BBL/P1P/BambuStudio/PolyLite PLA Luminous @BBL P1P.json", "filename": "PolyLite PLA Luminous @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5708,7 +5756,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Luminous/BBL/P1P/Orcaslicer/PolyLite PLA Luminous @BBL P1P.json", "filename": "PolyLite PLA Luminous @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5740,7 +5788,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Luminous/BBL/X1/BambuStudio/PolyLite PLA Luminous @BBL X1.json", "filename": "PolyLite PLA Luminous @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5771,7 +5819,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Luminous/BBL/X1/Orcaslicer/PolyLite PLA Luminous @BBL X1.json", "filename": "PolyLite PLA Luminous @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5802,7 +5850,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyLite PLA Luminous/Elegoo/CC2/ElegooSlicer/PolyLite PLA Luminous @Elegoo CC2.json", "filename": "PolyLite PLA Luminous @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -5818,7 +5866,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyLite PLA Luminous/Snapmaker/U1/OrcaSlicer/PolyLite PLA Luminous @Snapmaker U1.json", "filename": "PolyLite PLA Luminous @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -5834,7 +5882,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Neon/BBL/A1/BambuStudio/PolyLite PLA Neon @BBL A1.json", "filename": "PolyLite PLA Neon @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5855,7 +5903,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Neon/BBL/A1/Orcaslicer/PolyLite PLA Neon @BBL A1.json", "filename": "PolyLite PLA Neon @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5876,7 +5924,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Neon/BBL/A1M/BambuStudio/PolyLite PLA Neon @BBL A1M.json", "filename": "PolyLite PLA Neon @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5897,7 +5945,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Neon/BBL/A1M/Orcaslicer/PolyLite PLA Neon @BBL A1M.json", "filename": "PolyLite PLA Neon @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5918,7 +5966,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Neon/BBL/H2C/BambuStudio/PolyLite PLA Neon @BBL H2C.json", "filename": "PolyLite PLA Neon @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5934,7 +5982,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Neon/BBL/H2D/BambuStudio/PolyLite PLA Neon @BBL H2D.json", "filename": "PolyLite PLA Neon @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5950,7 +5998,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Neon/BBL/H2S/BambuStudio/PolyLite PLA Neon @BBL H2S.json", "filename": "PolyLite PLA Neon @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5966,7 +6014,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Neon/BBL/P1P/BambuStudio/PolyLite PLA Neon @BBL P1P.json", "filename": "PolyLite PLA Neon @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -5982,7 +6030,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Neon/BBL/P1P/Orcaslicer/PolyLite PLA Neon @BBL P1P.json", "filename": "PolyLite PLA Neon @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6014,7 +6062,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Neon/BBL/X1/BambuStudio/PolyLite PLA Neon @BBL X1.json", "filename": "PolyLite PLA Neon @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6045,7 +6093,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Neon/BBL/X1/Orcaslicer/PolyLite PLA Neon @BBL X1.json", "filename": "PolyLite PLA Neon @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6076,7 +6124,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyLite PLA Neon/Elegoo/CC2/ElegooSlicer/PolyLite PLA Neon @Elegoo CC2.json", "filename": "PolyLite PLA Neon @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -6092,7 +6140,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyLite PLA Neon/Snapmaker/U1/OrcaSlicer/PolyLite PLA Neon @Snapmaker U1.json", "filename": "PolyLite PLA Neon @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -6108,7 +6156,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Pro/BBL/H2C/BambuStudio/PolyLite PLA Pro @BBL H2C.json", "filename": "PolyLite PLA Pro @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6124,7 +6172,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Pro/BBL/H2D/BambuStudio/PolyLite PLA Pro @BBL H2D.json", "filename": "PolyLite PLA Pro @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6140,7 +6188,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Pro/BBL/H2S/BambuStudio/PolyLite PLA Pro @BBL H2S.json", "filename": "PolyLite PLA Pro @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6172,7 +6220,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyLite PLA Pro/Elegoo/CC2/ElegooSlicer/PolyLite PLA Pro @Elegoo CC2.json", "filename": "PolyLite PLA Pro @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -6188,7 +6236,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Pro Metallic/BBL/H2C/BambuStudio/PolyLite PLA Pro Metallic @BBL H2C.json", "filename": "PolyLite PLA Pro Metallic @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6204,7 +6252,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Pro Metallic/BBL/H2D/BambuStudio/PolyLite PLA Pro Metallic @BBL H2D.json", "filename": "PolyLite PLA Pro Metallic @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6220,7 +6268,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Pro Metallic/BBL/H2S/BambuStudio/PolyLite PLA Pro Metallic @BBL H2S.json", "filename": "PolyLite PLA Pro Metallic @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6252,7 +6300,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyLite PLA Pro Metallic/Elegoo/CC2/ElegooSlicer/PolyLite PLA Pro Metallic @Elegoo CC2.json", "filename": "PolyLite PLA Pro Metallic @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -6268,7 +6316,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Starlight/BBL/A1/BambuStudio/PolyLite PLA Starlight @BBL A1.json", "filename": "PolyLite PLA Starlight @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6289,7 +6337,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Starlight/BBL/A1/Orcaslicer/PolyLite PLA Starlight @BBL A1.json", "filename": "PolyLite PLA Starlight @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6310,7 +6358,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Starlight/BBL/A1M/BambuStudio/PolyLite PLA Starlight @BBL A1M.json", "filename": "PolyLite PLA Starlight @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6331,7 +6379,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Starlight/BBL/A1M/Orcaslicer/PolyLite PLA Starlight @BBL A1M.json", "filename": "PolyLite PLA Starlight @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6352,7 +6400,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Starlight/BBL/H2C/BambuStudio/PolyLite PLA Starlight @BBL H2C.json", "filename": "PolyLite PLA Starlight @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6368,7 +6416,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Starlight/BBL/H2D/BambuStudio/PolyLite PLA Starlight @BBL H2D.json", "filename": "PolyLite PLA Starlight @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6384,7 +6432,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Starlight/BBL/H2S/BambuStudio/PolyLite PLA Starlight @BBL H2S.json", "filename": "PolyLite PLA Starlight @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6400,7 +6448,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Starlight/BBL/P1P/BambuStudio/PolyLite PLA Starlight @BBL P1P.json", "filename": "PolyLite PLA Starlight @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6416,7 +6464,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Starlight/BBL/P1P/Orcaslicer/PolyLite PLA Starlight @BBL P1P.json", "filename": "PolyLite PLA Starlight @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6448,7 +6496,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Starlight/BBL/X1/BambuStudio/PolyLite PLA Starlight @BBL X1.json", "filename": "PolyLite PLA Starlight @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6479,7 +6527,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Starlight/BBL/X1/Orcaslicer/PolyLite PLA Starlight @BBL X1.json", "filename": "PolyLite PLA Starlight @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6510,7 +6558,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyLite PLA Starlight/Elegoo/CC2/ElegooSlicer/PolyLite PLA Starlight @Elegoo CC2.json", "filename": "PolyLite PLA Starlight @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -6526,7 +6574,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyLite PLA Starlight/Snapmaker/U1/OrcaSlicer/PolyLite PLA Starlight @Snapmaker U1.json", "filename": "PolyLite PLA Starlight @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -6542,7 +6590,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Translucent/BBL/A1/BambuStudio/PolyLite PLA Translucent @BBL A1.json", "filename": "PolyLite PLA Translucent @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6563,7 +6611,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Translucent/BBL/A1/Orcaslicer/PolyLite PLA Translucent @BBL A1.json", "filename": "PolyLite PLA Translucent @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6584,7 +6632,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Translucent/BBL/A1M/BambuStudio/PolyLite PLA Translucent @BBL A1M.json", "filename": "PolyLite PLA Translucent @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6605,7 +6653,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Translucent/BBL/A1M/Orcaslicer/PolyLite PLA Translucent @BBL A1M.json", "filename": "PolyLite PLA Translucent @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6626,7 +6674,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Translucent/BBL/H2C/BambuStudio/PolyLite PLA Translucent @BBL H2C.json", "filename": "PolyLite PLA Translucent @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6642,7 +6690,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Translucent/BBL/H2D/BambuStudio/PolyLite PLA Translucent @BBL H2D.json", "filename": "PolyLite PLA Translucent @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6658,7 +6706,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Translucent/BBL/H2S/BambuStudio/PolyLite PLA Translucent @BBL H2S.json", "filename": "PolyLite PLA Translucent @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6674,7 +6722,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Translucent/BBL/P1P/BambuStudio/PolyLite PLA Translucent @BBL P1P.json", "filename": "PolyLite PLA Translucent @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6690,7 +6738,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Translucent/BBL/P1P/Orcaslicer/PolyLite PLA Translucent @BBL P1P.json", "filename": "PolyLite PLA Translucent @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6722,7 +6770,7 @@ "slicer": "BambuStudio", "path": "preset/PolyLite PLA Translucent/BBL/X1/BambuStudio/PolyLite PLA Translucent @BBL X1.json", "filename": "PolyLite PLA Translucent @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6753,7 +6801,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyLite PLA Translucent/BBL/X1/Orcaslicer/PolyLite PLA Translucent @BBL X1.json", "filename": "PolyLite PLA Translucent @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6784,7 +6832,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyLite PLA Translucent/Elegoo/CC2/ElegooSlicer/PolyLite PLA Translucent @Elegoo CC2.json", "filename": "PolyLite PLA Translucent @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -6800,7 +6848,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyLite PLA Translucent/Snapmaker/U1/OrcaSlicer/PolyLite PLA Translucent @Snapmaker U1.json", "filename": "PolyLite PLA Translucent @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -6816,7 +6864,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA/BBL/A1/BambuStudio/PolyTerra PLA @BBL A1.json", "filename": "PolyTerra PLA @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6837,7 +6885,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyTerra PLA/BBL/A1/Orcaslicer/PolyTerra PLA @BBL A1.json", "filename": "PolyTerra PLA @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6858,7 +6906,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA/BBL/A1M/BambuStudio/PolyTerra PLA @BBL A1M.json", "filename": "PolyTerra PLA @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6879,7 +6927,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyTerra PLA/BBL/A1M/Orcaslicer/PolyTerra PLA @BBL A1M.json", "filename": "PolyTerra PLA @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6900,7 +6948,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA/BBL/H2C/BambuStudio/PolyTerra PLA @BBL H2C.json", "filename": "PolyTerra PLA @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6916,7 +6964,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA/BBL/P1P/BambuStudio/PolyTerra PLA @BBL P1P.json", "filename": "PolyTerra PLA @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6932,7 +6980,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyTerra PLA/BBL/P1P/Orcaslicer/PolyTerra PLA @BBL P1P.json", "filename": "PolyTerra PLA @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6964,7 +7012,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA/BBL/X1/BambuStudio/PolyTerra PLA @BBL X1.json", "filename": "PolyTerra PLA @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -6995,7 +7043,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyTerra PLA/BBL/X1/Orcaslicer/PolyTerra PLA @BBL X1.json", "filename": "PolyTerra PLA @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7026,7 +7074,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyTerra PLA/Elegoo/CC2/ElegooSlicer/PolyTerra PLA @Elegoo CC2.json", "filename": "PolyTerra PLA @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -7042,7 +7090,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyTerra PLA/Snapmaker/U1/OrcaSlicer/PolyTerra PLA @Snapmaker U1.json", "filename": "PolyTerra PLA @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -7058,7 +7106,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA Marble/BBL/A1/BambuStudio/PolyTerra PLA Marble @BBL A1.json", "filename": "PolyTerra PLA Marble @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7079,7 +7127,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyTerra PLA Marble/BBL/A1/Orcaslicer/PolyTerra PLA Marble @BBL A1.json", "filename": "PolyTerra PLA Marble @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7100,7 +7148,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA Marble/BBL/A1M/BambuStudio/PolyTerra PLA Marble @BBL A1M.json", "filename": "PolyTerra PLA Marble @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7121,7 +7169,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyTerra PLA Marble/BBL/A1M/Orcaslicer/PolyTerra PLA Marble @BBL A1M.json", "filename": "PolyTerra PLA Marble @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7142,7 +7190,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA Marble/BBL/H2C/BambuStudio/PolyTerra PLA Marble @BBL H2C.json", "filename": "PolyTerra PLA Marble @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7158,7 +7206,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA Marble/BBL/P1P/BambuStudio/PolyTerra PLA Marble @BBL P1P.json", "filename": "PolyTerra PLA Marble @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7174,7 +7222,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyTerra PLA Marble/BBL/P1P/Orcaslicer/PolyTerra PLA Marble @BBL P1P.json", "filename": "PolyTerra PLA Marble @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7206,7 +7254,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA Marble/BBL/X1/BambuStudio/PolyTerra PLA Marble @BBL X1.json", "filename": "PolyTerra PLA Marble @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7237,7 +7285,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyTerra PLA Marble/BBL/X1/Orcaslicer/PolyTerra PLA Marble @BBL X1.json", "filename": "PolyTerra PLA Marble @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7268,7 +7316,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyTerra PLA Marble/Elegoo/CC2/ElegooSlicer/PolyTerra PLA Marble @Elegoo CC2.json", "filename": "PolyTerra PLA Marble @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -7284,7 +7332,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyTerra PLA Marble/Snapmaker/U1/OrcaSlicer/PolyTerra PLA Marble @Snapmaker U1.json", "filename": "PolyTerra PLA Marble @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -7300,7 +7348,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA+/BBL/A1/BambuStudio/PolyTerra PLA+ @BBL A1.json", "filename": "PolyTerra PLA+ @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7321,7 +7369,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyTerra PLA+/BBL/A1/Orcaslicer/PolyTerra PLA+ @BBL A1.json", "filename": "PolyTerra PLA+ @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7342,7 +7390,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA+/BBL/A1M/BambuStudio/PolyTerra PLA+ @BBL A1M.json", "filename": "PolyTerra PLA+ @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7363,7 +7411,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyTerra PLA+/BBL/A1M/Orcaslicer/PolyTerra PLA+ @BBL A1M.json", "filename": "PolyTerra PLA+ @BBL A1M.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7384,7 +7432,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA+/BBL/H2C/BambuStudio/PolyTerra PLA+ @BBL H2C.json", "filename": "PolyTerra PLA+ @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7400,7 +7448,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA+/BBL/H2S/BambuStudio/PolyTerra PLA+ @BBL H2S.json", "filename": "PolyTerra PLA+ @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7416,7 +7464,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA+/BBL/P1P/BambuStudio/PolyTerra PLA+ @BBL P1P.json", "filename": "PolyTerra PLA+ @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7432,7 +7480,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyTerra PLA+/BBL/P1P/Orcaslicer/PolyTerra PLA+ @BBL P1P.json", "filename": "PolyTerra PLA+ @BBL P1P.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7464,7 +7512,7 @@ "slicer": "BambuStudio", "path": "preset/PolyTerra PLA+/BBL/X1/BambuStudio/PolyTerra PLA+ @BBL X1.json", "filename": "PolyTerra PLA+ @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7495,7 +7543,7 @@ "slicer": "Orcaslicer", "path": "preset/PolyTerra PLA+/BBL/X1/Orcaslicer/PolyTerra PLA+ @BBL X1.json", "filename": "PolyTerra PLA+ @BBL X1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7526,7 +7574,7 @@ "slicer": "ElegooSlicer", "path": "preset/PolyTerra PLA+/Elegoo/CC2/ElegooSlicer/PolyTerra PLA+ @Elegoo CC2.json", "filename": "PolyTerra PLA+ @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -7542,7 +7590,7 @@ "slicer": "OrcaSlicer", "path": "preset/PolyTerra PLA+/Snapmaker/U1/OrcaSlicer/PolyTerra PLA+ @Snapmaker U1.json", "filename": "PolyTerra PLA+ @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -7558,7 +7606,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker HT-PLA/BBL/H2C/BambuStudio/Polymaker HT-PLA @BBL H2C.json", "filename": "Polymaker HT-PLA @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7574,7 +7622,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker HT-PLA/BBL/H2D/BambuStudio/Polymaker HT-PLA @BBL H2D.json", "filename": "Polymaker HT-PLA @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7590,7 +7638,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker HT-PLA/BBL/H2S/BambuStudio/Polymaker HT-PLA @BBL H2S.json", "filename": "Polymaker HT-PLA @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7606,7 +7654,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker HT-PLA/BBL/P1S/BambuStudio/Polymaker HT-PLA @BBL P1S.json", "filename": "Polymaker HT-PLA @BBL P1S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7653,7 +7701,7 @@ "slicer": "ElegooSlicer", "path": "preset/Polymaker HT-PLA/Elegoo/CC2/ElegooSlicer/Polymaker HT-PLA @Elegoo CC2.json", "filename": "Polymaker HT-PLA @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -7669,7 +7717,7 @@ "slicer": "OrcaSlicer", "path": "preset/Polymaker HT-PLA/Snapmaker/U1/OrcaSlicer/Polymaker HT-PLA @Snapmaker U1.json", "filename": "Polymaker HT-PLA @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -7678,6 +7726,22 @@ } ] }, + { + "material": "Polymaker HT-PLA-GF", + "brand": "BBL", + "model": "H2C", + "slicer": "BambuStudio", + "path": "preset/Polymaker HT-PLA-GF/BBL/H2C/BambuStudio/Polymaker HT-PLA-GF @BBL H2C.json", + "filename": "Polymaker HT-PLA-GF @BBL H2C.json", + "updatedAt": "2026-04-14T15:04:49+08:00", + "compatiblePrinters": [ + { + "brand": "BBL", + "model": "H2C", + "fullName": "Bambu Lab H2C 0.4 nozzle" + } + ] + }, { "material": "Polymaker HT-PLA-GF", "brand": "BBL", @@ -7685,7 +7749,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker HT-PLA-GF/BBL/H2D/BambuStudio/Polymaker HT-PLA-GF @BBL H2D.json", "filename": "Polymaker HT-PLA-GF @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7701,7 +7765,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker HT-PLA-GF/BBL/H2S/BambuStudio/Polymaker HT-PLA-GF @BBL H2S.json", "filename": "Polymaker HT-PLA-GF @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7733,7 +7797,7 @@ "slicer": "ElegooSlicer", "path": "preset/Polymaker HT-PLA-GF/Elegoo/CC2/ElegooSlicer/Polymaker HT-PLA-GF @Elegoo CC2.json", "filename": "Polymaker HT-PLA-GF @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -7749,7 +7813,7 @@ "slicer": "OrcaSlicer", "path": "preset/Polymaker HT-PLA-GF/Snapmaker/U1/OrcaSlicer/Polymaker HT-PLA-GF @Snapmaker U1.json", "filename": "Polymaker HT-PLA-GF @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -7765,7 +7829,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PETG/BBL/A1/BambuStudio/Polymaker PETG @BBL A1.json", "filename": "Polymaker PETG @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7779,6 +7843,38 @@ } ] }, + { + "material": "Polymaker PETG", + "brand": "BBL", + "model": "H2C", + "slicer": "BambuStudio", + "path": "preset/Polymaker PETG/BBL/H2C/BambuStudio/Polymaker PETG @BBL H2C.json", + "filename": "Polymaker PETG @BBL H2C.json", + "updatedAt": "2026-04-14T15:02:15+08:00", + "compatiblePrinters": [ + { + "brand": "BBL", + "model": "H2C", + "fullName": "Bambu Lab H2C 0.4 nozzle" + } + ] + }, + { + "material": "Polymaker PETG", + "brand": "BBL", + "model": "H2D", + "slicer": "BambuStudio", + "path": "preset/Polymaker PETG/BBL/H2D/BambuStudio/Polymaker PETG @BBL H2D.json", + "filename": "Polymaker PETG @BBL H2D.json", + "updatedAt": "2026-04-14T15:02:15+08:00", + "compatiblePrinters": [ + { + "brand": "BBL", + "model": "H2D", + "fullName": "Bambu Lab H2D 0.4 nozzle" + } + ] + }, { "material": "Polymaker PETG", "brand": "BBL", @@ -7786,7 +7882,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PETG/BBL/H2S/BambuStudio/Polymaker PETG @BBL H2S.json", "filename": "Polymaker PETG @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7833,7 +7929,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PETG/BBL/P2S/BambuStudio/Polymaker PETG @BBL P2S.json", "filename": "Polymaker PETG @BBL P2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7849,7 +7945,7 @@ "slicer": "ElegooSlicer", "path": "preset/Polymaker PETG/Elegoo/CC2/ElegooSlicer/Polymaker PETG @Elegoo CC2.json", "filename": "Polymaker PETG @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -7865,7 +7961,7 @@ "slicer": "OrcaSlicer", "path": "preset/Polymaker PETG/Snapmaker/U1/OrcaSlicer/Polymaker PETG @Snapmaker U1.json", "filename": "Polymaker PETG @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -7881,7 +7977,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PETG Galaxy/BBL/A1/BambuStudio/Polymaker PETG Galaxy @BBL A1.json", "filename": "Polymaker PETG Galaxy @BBL A1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7895,6 +7991,38 @@ } ] }, + { + "material": "Polymaker PETG Galaxy", + "brand": "BBL", + "model": "H2C", + "slicer": "BambuStudio", + "path": "preset/Polymaker PETG Galaxy/BBL/H2C/BambuStudio/Polymaker PETG Galaxy @BBL H2C.json", + "filename": "Polymaker PETG Galaxy @BBL H2C.json", + "updatedAt": "2026-04-14T15:02:15+08:00", + "compatiblePrinters": [ + { + "brand": "BBL", + "model": "H2C", + "fullName": "Bambu Lab H2C 0.4 nozzle" + } + ] + }, + { + "material": "Polymaker PETG Galaxy", + "brand": "BBL", + "model": "H2D", + "slicer": "BambuStudio", + "path": "preset/Polymaker PETG Galaxy/BBL/H2D/BambuStudio/Polymaker PETG Galaxy @BBL H2D.json", + "filename": "Polymaker PETG Galaxy @BBL H2D.json", + "updatedAt": "2026-04-14T15:02:15+08:00", + "compatiblePrinters": [ + { + "brand": "BBL", + "model": "H2D", + "fullName": "Bambu Lab H2D 0.4 nozzle" + } + ] + }, { "material": "Polymaker PETG Galaxy", "brand": "BBL", @@ -7902,7 +8030,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PETG Galaxy/BBL/H2S/BambuStudio/Polymaker PETG Galaxy @BBL H2S.json", "filename": "Polymaker PETG Galaxy @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7949,7 +8077,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PETG Galaxy/BBL/P2S/BambuStudio/Polymaker PETG Galaxy @BBL P2S.json", "filename": "Polymaker PETG Galaxy @BBL P2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -7965,7 +8093,7 @@ "slicer": "ElegooSlicer", "path": "preset/Polymaker PETG Galaxy/Elegoo/CC2/ElegooSlicer/Polymaker PETG Galaxy @Elegoo CC2.json", "filename": "Polymaker PETG Galaxy @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -7981,7 +8109,7 @@ "slicer": "OrcaSlicer", "path": "preset/Polymaker PETG Galaxy/Snapmaker/U1/OrcaSlicer/Polymaker PETG Galaxy @Snapmaker U1.json", "filename": "Polymaker PETG Galaxy @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -7997,7 +8125,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA/BBL/H2C/BambuStudio/Polymaker PLA @BBL H2C.json", "filename": "Polymaker PLA @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8013,7 +8141,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA/BBL/H2D/BambuStudio/Polymaker PLA @BBL H2D.json", "filename": "Polymaker PLA @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8029,7 +8157,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA/BBL/H2S/BambuStudio/Polymaker PLA @BBL H2S.json", "filename": "Polymaker PLA @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8061,7 +8189,7 @@ "slicer": "ElegooSlicer", "path": "preset/Polymaker PLA/Elegoo/CC2/ElegooSlicer/Polymaker PLA @Elegoo CC2.json", "filename": "Polymaker PLA @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -8077,7 +8205,7 @@ "slicer": "OrcaSlicer", "path": "preset/Polymaker PLA Pro/Anycubic/Kobra S1/OrcaSlicer/Polymaker PLA Pro @Anycubic Kobra S1.json", "filename": "Polymaker PLA Pro @Anycubic Kobra S1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Anycubic", @@ -8086,6 +8214,27 @@ } ] }, + { + "material": "Polymaker PLA Pro", + "brand": "BBL", + "model": "A1", + "slicer": "BambuStudio", + "path": "preset/Polymaker PLA Pro/BBL/A1/BambuStudio/Polymaker PLA Pro @BBL A1.json", + "filename": "Polymaker PLA Pro @BBL A1.json", + "updatedAt": "2026-04-14T15:02:15+08:00", + "compatiblePrinters": [ + { + "brand": "BBL", + "model": "A1", + "fullName": "Bambu Lab A1 0.4 nozzle" + }, + { + "brand": "BBL", + "model": "A1M", + "fullName": "Bambu Lab A1 mini 0.4 nozzle" + } + ] + }, { "material": "Polymaker PLA Pro", "brand": "BBL", @@ -8093,7 +8242,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA Pro/BBL/H2C/BambuStudio/Polymaker PLA Pro @BBL H2C.json", "filename": "Polymaker PLA Pro @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8109,7 +8258,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA Pro/BBL/H2D/BambuStudio/Polymaker PLA Pro @BBL H2D.json", "filename": "Polymaker PLA Pro @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:02:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8125,7 +8274,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA Pro/BBL/H2S/BambuStudio/Polymaker PLA Pro @BBL H2S.json", "filename": "Polymaker PLA Pro @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8141,7 +8290,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA Pro/BBL/P1S/BambuStudio/Polymaker PLA Pro @BBL P1S.json", "filename": "Polymaker PLA Pro @BBL P1S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:02:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8172,7 +8321,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA Pro/BBL/P2S/BambuStudio/Polymaker PLA Pro @BBL P2S.json", "filename": "Polymaker PLA Pro @BBL P2S.json", - "updatedAt": "2026-03-27T16:01:57+08:00", + "updatedAt": "2026-04-14T15:02:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8188,7 +8337,7 @@ "slicer": "ElegooSlicer", "path": "preset/Polymaker PLA Pro/Elegoo/CC2/ElegooSlicer/Polymaker PLA Pro @Elegoo CC2.json", "filename": "Polymaker PLA Pro @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -8204,7 +8353,7 @@ "slicer": "OrcaSlicer", "path": "preset/Polymaker PLA Pro/Snapmaker/U1/OrcaSlicer/Polymaker PLA Pro @Snapmaker U1.json", "filename": "Polymaker PLA Pro @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", @@ -8220,7 +8369,7 @@ "slicer": "OrcaSlicer", "path": "preset/Polymaker PLA Pro Metallic/Anycubic/Kobra S1/OrcaSlicer/Polymaker PLA Pro Metallic @Anycubic Kobra S1.json", "filename": "Polymaker PLA Pro Metallic @Anycubic Kobra S1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Anycubic", @@ -8229,6 +8378,27 @@ } ] }, + { + "material": "Polymaker PLA Pro Metallic", + "brand": "BBL", + "model": "A1", + "slicer": "BambuStudio", + "path": "preset/Polymaker PLA Pro Metallic/BBL/A1/BambuStudio/Polymaker PLA Pro Metallic @BBL A1.json", + "filename": "Polymaker PLA Pro Metallic @BBL A1.json", + "updatedAt": "2026-04-14T15:02:15+08:00", + "compatiblePrinters": [ + { + "brand": "BBL", + "model": "A1", + "fullName": "Bambu Lab A1 0.4 nozzle" + }, + { + "brand": "BBL", + "model": "A1M", + "fullName": "Bambu Lab A1 mini 0.4 nozzle" + } + ] + }, { "material": "Polymaker PLA Pro Metallic", "brand": "BBL", @@ -8236,7 +8406,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA Pro Metallic/BBL/H2C/BambuStudio/Polymaker PLA Pro Metallic @BBL H2C.json", "filename": "Polymaker PLA Pro Metallic @BBL H2C.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:04:49+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8252,7 +8422,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA Pro Metallic/BBL/H2D/BambuStudio/Polymaker PLA Pro Metallic @BBL H2D.json", "filename": "Polymaker PLA Pro Metallic @BBL H2D.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:02:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8268,7 +8438,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA Pro Metallic/BBL/H2S/BambuStudio/Polymaker PLA Pro Metallic @BBL H2S.json", "filename": "Polymaker PLA Pro Metallic @BBL H2S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8284,7 +8454,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA Pro Metallic/BBL/P1S/BambuStudio/Polymaker PLA Pro Metallic @BBL P1S.json", "filename": "Polymaker PLA Pro Metallic @BBL P1S.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T15:02:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8315,7 +8485,7 @@ "slicer": "BambuStudio", "path": "preset/Polymaker PLA Pro Metallic/BBL/P2S/BambuStudio/Polymaker PLA Pro Metallic @BBL P2S.json", "filename": "Polymaker PLA Pro Metallic @BBL P2S.json", - "updatedAt": "2026-03-27T16:01:57+08:00", + "updatedAt": "2026-04-14T15:02:15+08:00", "compatiblePrinters": [ { "brand": "BBL", @@ -8331,7 +8501,7 @@ "slicer": "ElegooSlicer", "path": "preset/Polymaker PLA Pro Metallic/Elegoo/CC2/ElegooSlicer/Polymaker PLA Pro Metallic @Elegoo CC2.json", "filename": "Polymaker PLA Pro Metallic @Elegoo CC2.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Elegoo", @@ -8347,7 +8517,7 @@ "slicer": "OrcaSlicer", "path": "preset/Polymaker PLA Pro Metallic/Snapmaker/U1/OrcaSlicer/Polymaker PLA Pro Metallic @Snapmaker U1.json", "filename": "Polymaker PLA Pro Metallic @Snapmaker U1.json", - "updatedAt": "2026-04-14T14:00:22+08:00", + "updatedAt": "2026-04-14T14:06:15+08:00", "compatiblePrinters": [ { "brand": "Snapmaker", diff --git a/preset/Panchroma CoPE/BBL/H2C/BambuStudio/Panchroma CoPE @BBL H2C.json b/preset/Panchroma CoPE/BBL/H2C/BambuStudio/Panchroma CoPE @BBL H2C.json index f8bb831..fdc2559 100644 --- a/preset/Panchroma CoPE/BBL/H2C/BambuStudio/Panchroma CoPE @BBL H2C.json +++ b/preset/Panchroma CoPE/BBL/H2C/BambuStudio/Panchroma CoPE @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMCO01", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma CoPE/BBL/H2S/BambuStudio/Panchroma CoPE @BBL H2S.json b/preset/Panchroma CoPE/BBL/H2S/BambuStudio/Panchroma CoPE @BBL H2S.json new file mode 100644 index 0000000..a235f5c --- /dev/null +++ b/preset/Panchroma CoPE/BBL/H2S/BambuStudio/Panchroma CoPE @BBL H2S.json @@ -0,0 +1,173 @@ +{ + "type": "filament", + "name": "Panchroma CoPE @BBL H2S", + "from": "User", + "instantiation": "true", + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "55" + ], + "hot_plate_temp": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "overhang_fan_threshold": [ + "50%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.96", + "0.99" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.29" + ], + "filament_diameter": [ + "1.75" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18.8", + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_settings_id": [ + "Panchroma CoPE @BBL H2S" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Polymaker" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "210", + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "nozzle_temperature": [ + "210", + "nil" + ], + "temperature_vitrification": [ + "58.2" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "additional_cooling_fan_speed": [ + "75" + ], + "filament_id": "PMCO01", + "description": " ", + "setting_id": "GFSL99_08", + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "version": "2.5.0.14", + "idle_temperature": 0 +} \ No newline at end of file diff --git a/preset/Panchroma PLA Celestial/BBL/H2C/BambuStudio/Panchroma PLA Celestial @BBL H2C.json b/preset/Panchroma PLA Celestial/BBL/H2C/BambuStudio/Panchroma PLA Celestial @BBL H2C.json index 965d5bd..d036767 100644 --- a/preset/Panchroma PLA Celestial/BBL/H2C/BambuStudio/Panchroma PLA Celestial @BBL H2C.json +++ b/preset/Panchroma PLA Celestial/BBL/H2C/BambuStudio/Panchroma PLA Celestial @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL02", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA Galaxy/BBL/H2C/BambuStudio/Panchroma PLA Galaxy @BBL H2C.json b/preset/Panchroma PLA Galaxy/BBL/H2C/BambuStudio/Panchroma PLA Galaxy @BBL H2C.json index 527b7e7..738040c 100644 --- a/preset/Panchroma PLA Galaxy/BBL/H2C/BambuStudio/Panchroma PLA Galaxy @BBL H2C.json +++ b/preset/Panchroma PLA Galaxy/BBL/H2C/BambuStudio/Panchroma PLA Galaxy @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL03", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA Glow/BBL/H2C/BambuStudio/Panchroma PLA Glow @BBL H2C.json b/preset/Panchroma PLA Glow/BBL/H2C/BambuStudio/Panchroma PLA Glow @BBL H2C.json index 791c54f..60701c5 100644 --- a/preset/Panchroma PLA Glow/BBL/H2C/BambuStudio/Panchroma PLA Glow @BBL H2C.json +++ b/preset/Panchroma PLA Glow/BBL/H2C/BambuStudio/Panchroma PLA Glow @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL04", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA Luminous/BBL/H2C/BambuStudio/Panchroma PLA Luminous @BBL H2C.json b/preset/Panchroma PLA Luminous/BBL/H2C/BambuStudio/Panchroma PLA Luminous @BBL H2C.json index 304f3da..6ee5203 100644 --- a/preset/Panchroma PLA Luminous/BBL/H2C/BambuStudio/Panchroma PLA Luminous @BBL H2C.json +++ b/preset/Panchroma PLA Luminous/BBL/H2C/BambuStudio/Panchroma PLA Luminous @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL05", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA Marble/BBL/H2C/BambuStudio/Panchroma PLA Marble @BBL H2C.json b/preset/Panchroma PLA Marble/BBL/H2C/BambuStudio/Panchroma PLA Marble @BBL H2C.json index 4b67604..14ec325 100644 --- a/preset/Panchroma PLA Marble/BBL/H2C/BambuStudio/Panchroma PLA Marble @BBL H2C.json +++ b/preset/Panchroma PLA Marble/BBL/H2C/BambuStudio/Panchroma PLA Marble @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL06", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA Matte/BBL/H2C/BambuStudio/Panchroma PLA Matte @BBL H2C.json b/preset/Panchroma PLA Matte/BBL/H2C/BambuStudio/Panchroma PLA Matte @BBL H2C.json index a903f0c..cc45a77 100644 --- a/preset/Panchroma PLA Matte/BBL/H2C/BambuStudio/Panchroma PLA Matte @BBL H2C.json +++ b/preset/Panchroma PLA Matte/BBL/H2C/BambuStudio/Panchroma PLA Matte @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL07", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA Metallic/BBL/H2C/BambuStudio/Panchroma PLA Metallic @BBL H2C.json b/preset/Panchroma PLA Metallic/BBL/H2C/BambuStudio/Panchroma PLA Metallic @BBL H2C.json index 4a39745..fe8ed94 100644 --- a/preset/Panchroma PLA Metallic/BBL/H2C/BambuStudio/Panchroma PLA Metallic @BBL H2C.json +++ b/preset/Panchroma PLA Metallic/BBL/H2C/BambuStudio/Panchroma PLA Metallic @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL08", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA Neon/BBL/H2C/BambuStudio/Panchroma PLA Neon @BBL H2C.json b/preset/Panchroma PLA Neon/BBL/H2C/BambuStudio/Panchroma PLA Neon @BBL H2C.json index 4e6c371..dcfbe95 100644 --- a/preset/Panchroma PLA Neon/BBL/H2C/BambuStudio/Panchroma PLA Neon @BBL H2C.json +++ b/preset/Panchroma PLA Neon/BBL/H2C/BambuStudio/Panchroma PLA Neon @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL09", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA Satin/BBL/H2C/BambuStudio/Panchroma PLA Satin @BBL H2C.json b/preset/Panchroma PLA Satin/BBL/H2C/BambuStudio/Panchroma PLA Satin @BBL H2C.json index 3647c48..eeeac6d 100644 --- a/preset/Panchroma PLA Satin/BBL/H2C/BambuStudio/Panchroma PLA Satin @BBL H2C.json +++ b/preset/Panchroma PLA Satin/BBL/H2C/BambuStudio/Panchroma PLA Satin @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL10", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA Silk/BBL/H2C/BambuStudio/Panchroma PLA Silk @BBL H2C.json b/preset/Panchroma PLA Silk/BBL/H2C/BambuStudio/Panchroma PLA Silk @BBL H2C.json index e655896..e9a44f5 100644 --- a/preset/Panchroma PLA Silk/BBL/H2C/BambuStudio/Panchroma PLA Silk @BBL H2C.json +++ b/preset/Panchroma PLA Silk/BBL/H2C/BambuStudio/Panchroma PLA Silk @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL11", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA Starlight/BBL/H2C/BambuStudio/Panchroma PLA Starlight @BBL H2C.json b/preset/Panchroma PLA Starlight/BBL/H2C/BambuStudio/Panchroma PLA Starlight @BBL H2C.json index ed77aae..f03b03e 100644 --- a/preset/Panchroma PLA Starlight/BBL/H2C/BambuStudio/Panchroma PLA Starlight @BBL H2C.json +++ b/preset/Panchroma PLA Starlight/BBL/H2C/BambuStudio/Panchroma PLA Starlight @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL12", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA Translucent/BBL/H2C/BambuStudio/Panchroma PLA Translucent @BBL H2C.json b/preset/Panchroma PLA Translucent/BBL/H2C/BambuStudio/Panchroma PLA Translucent @BBL H2C.json index 237ab29..7051927 100644 --- a/preset/Panchroma PLA Translucent/BBL/H2C/BambuStudio/Panchroma PLA Translucent @BBL H2C.json +++ b/preset/Panchroma PLA Translucent/BBL/H2C/BambuStudio/Panchroma PLA Translucent @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL13", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA UV Shift/BBL/H2C/BambuStudio/Panchroma PLA UV Shift @BBL H2C.json b/preset/Panchroma PLA UV Shift/BBL/H2C/BambuStudio/Panchroma PLA UV Shift @BBL H2C.json index 5298b03..e8233eb 100644 --- a/preset/Panchroma PLA UV Shift/BBL/H2C/BambuStudio/Panchroma PLA UV Shift @BBL H2C.json +++ b/preset/Panchroma PLA UV Shift/BBL/H2C/BambuStudio/Panchroma PLA UV Shift @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL14", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Panchroma PLA/BBL/H2C/BambuStudio/Panchroma PLA @BBL H2C.json b/preset/Panchroma PLA/BBL/H2C/BambuStudio/Panchroma PLA @BBL H2C.json index e1196a8..7027521 100644 --- a/preset/Panchroma PLA/BBL/H2C/BambuStudio/Panchroma PLA @BBL H2C.json +++ b/preset/Panchroma PLA/BBL/H2C/BambuStudio/Panchroma PLA @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL01", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyLite CosPLA/BBL/H2C/BambuStudio/PolyLite CosPLA @BBL H2C.json b/preset/PolyLite CosPLA/BBL/H2C/BambuStudio/PolyLite CosPLA @BBL H2C.json index c4a092c..06563dc 100644 --- a/preset/PolyLite CosPLA/BBL/H2C/BambuStudio/PolyLite CosPLA @BBL H2C.json +++ b/preset/PolyLite CosPLA/BBL/H2C/BambuStudio/PolyLite CosPLA @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMCO02", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyLite PETG Translucent/Elegoo/CC2/ElegooSlicer/PolyLite PETG Translucent @Elegoo CC2.json b/preset/PolyLite PETG Translucent/Elegoo/CC2/ElegooSlicer/PolyLite PETG Translucent @Elegoo CC2.json new file mode 100644 index 0000000..3b14783 --- /dev/null +++ b/preset/PolyLite PETG Translucent/Elegoo/CC2/ElegooSlicer/PolyLite PETG Translucent @Elegoo CC2.json @@ -0,0 +1,138 @@ +{ + "type": "filament", + "name": "PolyLite PETG Translucent @Elegoo CC2", + "from": "User", + "instantiation": "true", + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "overhang_fan_threshold": [ + "0%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "1.03" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.25" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "PolyLite PETG Translucent @Elegoo CC2" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Polymaker" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "nozzle_temperature": [ + "260" + ], + "temperature_vitrification": [ + "81" + ], + "filament_id": "PMPE05", + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "supertack_plate_temp": [ + "70" + ], + "supertack_plate_temp_initial_layer": [ + "70" + ], + "renamed_from": "My Generic PETG", + "setting_id": "OGFSA04", + "compatible_printers": [ + "Elegoo Centauri Carbon 2 0.4 nozzle" + ], + "enable_pressure_advance": [ + "1" + ], + "is_custom_defined": "0", + "pressure_advance": [ + "0.12" + ], + "version": "1.3.2.9", + "idle_temperature": 0 +} \ No newline at end of file diff --git a/preset/PolyLite PETG/Elegoo/CC2/ElegooSlicer/PolyLite PETG @Elegoo CC2.json b/preset/PolyLite PETG/Elegoo/CC2/ElegooSlicer/PolyLite PETG @Elegoo CC2.json new file mode 100644 index 0000000..706f5db --- /dev/null +++ b/preset/PolyLite PETG/Elegoo/CC2/ElegooSlicer/PolyLite PETG @Elegoo CC2.json @@ -0,0 +1,138 @@ +{ + "type": "filament", + "name": "PolyLite PETG @Elegoo CC2", + "from": "User", + "instantiation": "true", + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "overhang_fan_threshold": [ + "0%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "1.03" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.25" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "PolyLite PETG @Elegoo CC2" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Polymaker" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "nozzle_temperature": [ + "260" + ], + "temperature_vitrification": [ + "81" + ], + "filament_id": "PMPE04", + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "supertack_plate_temp": [ + "70" + ], + "supertack_plate_temp_initial_layer": [ + "70" + ], + "renamed_from": "My Generic PETG", + "setting_id": "OGFSA04", + "compatible_printers": [ + "Elegoo Centauri Carbon 2 0.4 nozzle" + ], + "enable_pressure_advance": [ + "1" + ], + "is_custom_defined": "0", + "pressure_advance": [ + "0.12" + ], + "version": "1.3.2.9", + "idle_temperature": 0 +} \ No newline at end of file diff --git a/preset/PolyLite PLA Galaxy/BBL/H2C/BambuStudio/PolyLite PLA Galaxy @BBL H2C.json b/preset/PolyLite PLA Galaxy/BBL/H2C/BambuStudio/PolyLite PLA Galaxy @BBL H2C.json index 9d765b5..493cca4 100644 --- a/preset/PolyLite PLA Galaxy/BBL/H2C/BambuStudio/PolyLite PLA Galaxy @BBL H2C.json +++ b/preset/PolyLite PLA Galaxy/BBL/H2C/BambuStudio/PolyLite PLA Galaxy @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL16", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyLite PLA Glow/BBL/H2C/BambuStudio/PolyLite PLA Glow @BBL H2C.json b/preset/PolyLite PLA Glow/BBL/H2C/BambuStudio/PolyLite PLA Glow @BBL H2C.json index cb58e37..40b5e4f 100644 --- a/preset/PolyLite PLA Glow/BBL/H2C/BambuStudio/PolyLite PLA Glow @BBL H2C.json +++ b/preset/PolyLite PLA Glow/BBL/H2C/BambuStudio/PolyLite PLA Glow @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL17", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyLite PLA Luminous/BBL/H2C/BambuStudio/PolyLite PLA Luminous @BBL H2C.json b/preset/PolyLite PLA Luminous/BBL/H2C/BambuStudio/PolyLite PLA Luminous @BBL H2C.json index 598a2b6..a9a15ff 100644 --- a/preset/PolyLite PLA Luminous/BBL/H2C/BambuStudio/PolyLite PLA Luminous @BBL H2C.json +++ b/preset/PolyLite PLA Luminous/BBL/H2C/BambuStudio/PolyLite PLA Luminous @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL18", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyLite PLA Neon/BBL/H2C/BambuStudio/PolyLite PLA Neon @BBL H2C.json b/preset/PolyLite PLA Neon/BBL/H2C/BambuStudio/PolyLite PLA Neon @BBL H2C.json index 34bf151..530be0b 100644 --- a/preset/PolyLite PLA Neon/BBL/H2C/BambuStudio/PolyLite PLA Neon @BBL H2C.json +++ b/preset/PolyLite PLA Neon/BBL/H2C/BambuStudio/PolyLite PLA Neon @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL19", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyLite PLA Pro Metallic/BBL/H2C/BambuStudio/PolyLite PLA Pro Metallic @BBL H2C.json b/preset/PolyLite PLA Pro Metallic/BBL/H2C/BambuStudio/PolyLite PLA Pro Metallic @BBL H2C.json index 0feff12..4f537b9 100644 --- a/preset/PolyLite PLA Pro Metallic/BBL/H2C/BambuStudio/PolyLite PLA Pro Metallic @BBL H2C.json +++ b/preset/PolyLite PLA Pro Metallic/BBL/H2C/BambuStudio/PolyLite PLA Pro Metallic @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL21", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyLite PLA Pro/BBL/H2C/BambuStudio/PolyLite PLA Pro @BBL H2C.json b/preset/PolyLite PLA Pro/BBL/H2C/BambuStudio/PolyLite PLA Pro @BBL H2C.json index f48de93..2aa0f43 100644 --- a/preset/PolyLite PLA Pro/BBL/H2C/BambuStudio/PolyLite PLA Pro @BBL H2C.json +++ b/preset/PolyLite PLA Pro/BBL/H2C/BambuStudio/PolyLite PLA Pro @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL20", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyLite PLA Starlight/BBL/H2C/BambuStudio/PolyLite PLA Starlight @BBL H2C.json b/preset/PolyLite PLA Starlight/BBL/H2C/BambuStudio/PolyLite PLA Starlight @BBL H2C.json index 4f4d33d..00bdc0d 100644 --- a/preset/PolyLite PLA Starlight/BBL/H2C/BambuStudio/PolyLite PLA Starlight @BBL H2C.json +++ b/preset/PolyLite PLA Starlight/BBL/H2C/BambuStudio/PolyLite PLA Starlight @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL22", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyLite PLA Translucent/BBL/H2C/BambuStudio/PolyLite PLA Translucent @BBL H2C.json b/preset/PolyLite PLA Translucent/BBL/H2C/BambuStudio/PolyLite PLA Translucent @BBL H2C.json index f794354..a15bddf 100644 --- a/preset/PolyLite PLA Translucent/BBL/H2C/BambuStudio/PolyLite PLA Translucent @BBL H2C.json +++ b/preset/PolyLite PLA Translucent/BBL/H2C/BambuStudio/PolyLite PLA Translucent @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL23", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyLite PLA/BBL/H2C/BambuStudio/PolyLite PLA @BBL H2C.json b/preset/PolyLite PLA/BBL/H2C/BambuStudio/PolyLite PLA @BBL H2C.json index 144aef6..1dab815 100644 --- a/preset/PolyLite PLA/BBL/H2C/BambuStudio/PolyLite PLA @BBL H2C.json +++ b/preset/PolyLite PLA/BBL/H2C/BambuStudio/PolyLite PLA @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL15", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyTerra PLA Marble/BBL/H2C/BambuStudio/PolyTerra PLA Marble @BBL H2C.json b/preset/PolyTerra PLA Marble/BBL/H2C/BambuStudio/PolyTerra PLA Marble @BBL H2C.json index e173a72..b0a4bae 100644 --- a/preset/PolyTerra PLA Marble/BBL/H2C/BambuStudio/PolyTerra PLA Marble @BBL H2C.json +++ b/preset/PolyTerra PLA Marble/BBL/H2C/BambuStudio/PolyTerra PLA Marble @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL28", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyTerra PLA+/BBL/H2C/BambuStudio/PolyTerra PLA+ @BBL H2C.json b/preset/PolyTerra PLA+/BBL/H2C/BambuStudio/PolyTerra PLA+ @BBL H2C.json index 32e7f7d..5ef65bf 100644 --- a/preset/PolyTerra PLA+/BBL/H2C/BambuStudio/PolyTerra PLA+ @BBL H2C.json +++ b/preset/PolyTerra PLA+/BBL/H2C/BambuStudio/PolyTerra PLA+ @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL29", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/PolyTerra PLA/BBL/H2C/BambuStudio/PolyTerra PLA @BBL H2C.json b/preset/PolyTerra PLA/BBL/H2C/BambuStudio/PolyTerra PLA @BBL H2C.json index 866f71b..d3df2f9 100644 --- a/preset/PolyTerra PLA/BBL/H2C/BambuStudio/PolyTerra PLA @BBL H2C.json +++ b/preset/PolyTerra PLA/BBL/H2C/BambuStudio/PolyTerra PLA @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL27", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Polymaker HT-PLA-GF/BBL/H2C/BambuStudio/Polymaker HT-PLA-GF @BBL H2C.json b/preset/Polymaker HT-PLA-GF/BBL/H2C/BambuStudio/Polymaker HT-PLA-GF @BBL H2C.json new file mode 100644 index 0000000..78a105a --- /dev/null +++ b/preset/Polymaker HT-PLA-GF/BBL/H2C/BambuStudio/Polymaker HT-PLA-GF @BBL H2C.json @@ -0,0 +1,195 @@ +{ + "type": "filament", + "name": "Polymaker HT-PLA-GF @BBL H2C", + "from": "User", + "instantiation": "true", + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "55" + ], + "hot_plate_temp": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "overhang_fan_threshold": [ + "50%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.96", + "nil" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.34" + ], + "filament_diameter": [ + "1.75" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "15", + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_settings_id": [ + "Polymaker HT-PLA-GF @BBL H2C" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Polymaker" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "temperature_vitrification": [ + "59.76" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "additional_cooling_fan_speed": [ + "75" + ], + "filament_id": "PMHT02", + "description": " ", + "setting_id": "GFSL99_20", + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "version": "2.5.0.14", + "idle_temperature": 0 +} \ No newline at end of file diff --git a/preset/Polymaker HT-PLA/BBL/H2C/BambuStudio/Polymaker HT-PLA @BBL H2C.json b/preset/Polymaker HT-PLA/BBL/H2C/BambuStudio/Polymaker HT-PLA @BBL H2C.json index c934e57..c893e6b 100644 --- a/preset/Polymaker HT-PLA/BBL/H2C/BambuStudio/Polymaker HT-PLA @BBL H2C.json +++ b/preset/Polymaker HT-PLA/BBL/H2C/BambuStudio/Polymaker HT-PLA @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMHT01", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Polymaker HT-PLA/BBL/P1S/BambuStudio/Polymaker HT-PLA @BBL P1S.json b/preset/Polymaker HT-PLA/BBL/P1S/BambuStudio/Polymaker HT-PLA @BBL P1S.json index 378f853..a344f5c 100644 --- a/preset/Polymaker HT-PLA/BBL/P1S/BambuStudio/Polymaker HT-PLA @BBL P1S.json +++ b/preset/Polymaker HT-PLA/BBL/P1S/BambuStudio/Polymaker HT-PLA @BBL P1S.json @@ -124,7 +124,7 @@ "70" ], "filament_id": "PMHT01", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99", "compatible_printers": [ "Bambu Lab P1S 0.4 nozzle", diff --git a/preset/Polymaker PETG Galaxy/BBL/H2C/BambuStudio/Polymaker PETG Galaxy @BBL H2C.json b/preset/Polymaker PETG Galaxy/BBL/H2C/BambuStudio/Polymaker PETG Galaxy @BBL H2C.json new file mode 100644 index 0000000..d025cb5 --- /dev/null +++ b/preset/Polymaker PETG Galaxy/BBL/H2C/BambuStudio/Polymaker PETG Galaxy @BBL H2C.json @@ -0,0 +1,191 @@ +{ + "type": "filament", + "name": "Polymaker PETG Galaxy @BBL H2C", + "from": "User", + "instantiation": "true", + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "overhang_fan_speed": [ + "90" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98", + "nil" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "31" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.3" + ], + "filament_diameter": [ + "1.75" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "15", + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_settings_id": [ + "Polymaker PETG Galaxy @BBL H2C" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Polymaker" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "240", + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "nozzle_temperature": [ + "240", + "nil" + ], + "temperature_vitrification": [ + "71.24" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "filament_id": "PMPE07", + "setting_id": "GFSG99_18", + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "215", + "215" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "version": "2.5.0.14", + "idle_temperature": 0 +} \ No newline at end of file diff --git a/preset/Polymaker PETG Galaxy/BBL/H2D/BambuStudio/Polymaker PETG Galaxy @BBL H2D.json b/preset/Polymaker PETG Galaxy/BBL/H2D/BambuStudio/Polymaker PETG Galaxy @BBL H2D.json new file mode 100644 index 0000000..f6b3d7c --- /dev/null +++ b/preset/Polymaker PETG Galaxy/BBL/H2D/BambuStudio/Polymaker PETG Galaxy @BBL H2D.json @@ -0,0 +1,145 @@ +{ + "type": "filament", + "name": "Polymaker PETG Galaxy @BBL H2D", + "from": "User", + "instantiation": "true", + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "overhang_fan_speed": [ + "90" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.96", + "nil" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "31" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.3" + ], + "filament_diameter": [ + "1.75" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "15", + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Polymaker PETG Galaxy @BBL H2D" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Polymaker" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "240", + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "nozzle_temperature": [ + "240", + "nil" + ], + "temperature_vitrification": [ + "71.24" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "filament_id": "PMPE07", + "setting_id": "GFSG99_05", + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "version": "2.5.0.14", + "idle_temperature": 0 +} \ No newline at end of file diff --git a/preset/Polymaker PETG/BBL/H2C/BambuStudio/Polymaker PETG @BBL H2C.json b/preset/Polymaker PETG/BBL/H2C/BambuStudio/Polymaker PETG @BBL H2C.json new file mode 100644 index 0000000..513190b --- /dev/null +++ b/preset/Polymaker PETG/BBL/H2C/BambuStudio/Polymaker PETG @BBL H2C.json @@ -0,0 +1,191 @@ +{ + "type": "filament", + "name": "Polymaker PETG @BBL H2C", + "from": "User", + "instantiation": "true", + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "overhang_fan_speed": [ + "90" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98", + "nil" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "31" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.3" + ], + "filament_diameter": [ + "1.75" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "15", + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_settings_id": [ + "Polymaker PETG @BBL H2C" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Polymaker" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "240", + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "nozzle_temperature": [ + "240", + "nil" + ], + "temperature_vitrification": [ + "71.24" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "filament_id": "PMPE06", + "setting_id": "GFSG99_18", + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "215", + "215" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "version": "2.5.0.14", + "idle_temperature": 0 +} \ No newline at end of file diff --git a/preset/Polymaker PETG/BBL/H2D/BambuStudio/Polymaker PETG @BBL H2D.json b/preset/Polymaker PETG/BBL/H2D/BambuStudio/Polymaker PETG @BBL H2D.json new file mode 100644 index 0000000..38b990e --- /dev/null +++ b/preset/Polymaker PETG/BBL/H2D/BambuStudio/Polymaker PETG @BBL H2D.json @@ -0,0 +1,145 @@ +{ + "type": "filament", + "name": "Polymaker PETG @BBL H2D", + "from": "User", + "instantiation": "true", + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "overhang_fan_speed": [ + "90" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.96", + "nil" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "31" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.3" + ], + "filament_diameter": [ + "1.75" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "15", + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_settings_id": [ + "Polymaker PETG @BBL H2D" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Polymaker" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "240", + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "nozzle_temperature": [ + "240", + "nil" + ], + "temperature_vitrification": [ + "71.24" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "filament_id": "PMPE06", + "setting_id": "GFSG99_05", + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "version": "2.5.0.14", + "idle_temperature": 0 +} \ No newline at end of file diff --git a/preset/Polymaker PLA Pro Metallic/BBL/A1/BambuStudio/Polymaker PLA Pro Metallic @BBL A1.json b/preset/Polymaker PLA Pro Metallic/BBL/A1/BambuStudio/Polymaker PLA Pro Metallic @BBL A1.json new file mode 100644 index 0000000..53cc62a --- /dev/null +++ b/preset/Polymaker PLA Pro Metallic/BBL/A1/BambuStudio/Polymaker PLA Pro Metallic @BBL A1.json @@ -0,0 +1,369 @@ +{ + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "chamber_temperatures": [ + "0" + ], + "circle_compensation_speed": [ + "200" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 mini 0.4 nozzle" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "cooling_perimeter_transition_distance": [ + "10" + ], + "cooling_slowdown_logic": [ + "uniform_cooling" + ], + "counter_coef_1": [ + "0" + ], + "counter_coef_2": [ + "0.025" + ], + "counter_coef_3": [ + "-0.11" + ], + "counter_limit_max": [ + "0.05" + ], + "counter_limit_min": [ + "-0.04" + ], + "default_filament_colour": [ + "" + ], + "diameter_limit": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_adaptive_volumetric_speed": [ + "0" + ], + "filament_adhesiveness_category": [ + "0" + ], + "filament_bridge_speed": [ + "25" + ], + "filament_change_length": [ + "10" + ], + "filament_change_length_nc": [ + "10" + ], + "filament_cooling_before_tower": [ + "10" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "1.23" + ], + "filament_dev_ams_drying_ams_limitations": [ + "" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "0" + ], + "filament_dev_ams_drying_temperature": [ + "0" + ], + "filament_dev_ams_drying_time": [ + "0" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "0" + ], + "filament_dev_chamber_drying_time": [ + "0" + ], + "filament_dev_drying_cooling_temperature": [ + "0" + ], + "filament_dev_drying_softening_temperature": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_enable_overhang_speed": [ + "1" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_volumetric_speed": [ + "0" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_notes": "", + "filament_overhang_1_4_speed": [ + "0" + ], + "filament_overhang_2_4_speed": [ + "0" + ], + "filament_overhang_3_4_speed": [ + "0" + ], + "filament_overhang_4_4_speed": [ + "0" + ], + "filament_overhang_totally_speed": [ + "10" + ], + "filament_pre_cooling_temperature": [ + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0" + ], + "filament_prime_volume": [ + "45" + ], + "filament_prime_volume_nc": [ + "60" + ], + "filament_printable": [ + "3" + ], + "filament_ramming_travel_time": [ + "0" + ], + "filament_ramming_travel_time_nc": [ + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1" + ], + "filament_retract_length_nc": [ + "10" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_scarf_gap": [ + "0" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_settings_id": [ + "Polymaker PLA Pro Metallic @BBL A1" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "filament_tower_interface_pre_extrusion_dist": [ + "10" + ], + "filament_tower_interface_pre_extrusion_length": [ + "0" + ], + "filament_tower_interface_print_temp": [ + "-1" + ], + "filament_tower_interface_purge_volume": [ + "20" + ], + "filament_tower_ironing_area": [ + "4" + ], + "filament_type": [ + "PLA" + ], + "filament_velocity_adaptation_factor": [ + "1" + ], + "filament_vendor": [ + "Polymaker" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "from": "User", + "full_fan_speed_layer": [ + "0" + ], + "hole_coef_1": [ + "0" + ], + "hole_coef_2": [ + "-0.025" + ], + "hole_coef_3": [ + "0.28" + ], + "hole_limit_max": [ + "0.25" + ], + "hole_limit_min": [ + "0.08" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "impact_strength_z": [ + "0" + ], + "long_retractions_when_ec": [ + "0" + ], + "name": "Polymaker PLA Pro Metallic @BBL A1", + "no_slow_down_for_cooling_on_outwalls": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "overhang_threshold_participating_cooling": [ + "95%" + ], + "override_process_overhang_speed": [ + "0" + ], + "pre_start_fan_time": [ + "0" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "3" + ], + "retraction_distances_when_ec": [ + "10" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "supertack_plate_temp": [ + "45" + ], + "supertack_plate_temp_initial_layer": [ + "45" + ], + "temperature_vitrification": [ + "55" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "0.0.0.0", + "volumetric_speed_coefficients": [ + "" + ], + "idle_temperature": 0, + "filament_id": "PMPL26" +} \ No newline at end of file diff --git a/preset/Polymaker PLA Pro Metallic/BBL/H2C/BambuStudio/Polymaker PLA Pro Metallic @BBL H2C.json b/preset/Polymaker PLA Pro Metallic/BBL/H2C/BambuStudio/Polymaker PLA Pro Metallic @BBL H2C.json index 3e3fe67..343ca14 100644 --- a/preset/Polymaker PLA Pro Metallic/BBL/H2C/BambuStudio/Polymaker PLA Pro Metallic @BBL H2C.json +++ b/preset/Polymaker PLA Pro Metallic/BBL/H2C/BambuStudio/Polymaker PLA Pro Metallic @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL26", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Polymaker PLA Pro Metallic/BBL/H2D/BambuStudio/Polymaker PLA Pro Metallic @BBL H2D.json b/preset/Polymaker PLA Pro Metallic/BBL/H2D/BambuStudio/Polymaker PLA Pro Metallic @BBL H2D.json index 5216077..337a44a 100644 --- a/preset/Polymaker PLA Pro Metallic/BBL/H2D/BambuStudio/Polymaker PLA Pro Metallic @BBL H2D.json +++ b/preset/Polymaker PLA Pro Metallic/BBL/H2D/BambuStudio/Polymaker PLA Pro Metallic @BBL H2D.json @@ -29,6 +29,12 @@ "cool_plate_temp_initial_layer": [ "35" ], + "cooling_perimeter_transition_distance": [ + "10" + ], + "cooling_slowdown_logic": [ + "uniform_cooling" + ], "counter_coef_1": [ "0" ], @@ -80,6 +86,9 @@ "filament_adhesiveness_category": [ "0" ], + "filament_bridge_speed": [ + "25" + ], "filament_change_length": [ "10" ], @@ -95,9 +104,36 @@ "filament_density": [ "1.23" ], + "filament_dev_ams_drying_ams_limitations": [ + "" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "0" + ], + "filament_dev_ams_drying_temperature": [ + "0" + ], + "filament_dev_ams_drying_time": [ + "0" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "0" + ], + "filament_dev_chamber_drying_time": [ + "0" + ], + "filament_dev_drying_cooling_temperature": [ + "0" + ], + "filament_dev_drying_softening_temperature": [ + "0" + ], "filament_diameter": [ "1.75" ], + "filament_enable_overhang_speed": [ + "1" + ], "filament_end_gcode": [ "; filament end gcode\n" ], @@ -120,12 +156,27 @@ "1" ], "filament_max_volumetric_speed": [ - "20" + "12" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_notes": "", + "filament_overhang_1_4_speed": [ + "0" + ], + "filament_overhang_2_4_speed": [ + "0" + ], + "filament_overhang_3_4_speed": [ + "0" + ], + "filament_overhang_4_4_speed": [ + "0" + ], + "filament_overhang_totally_speed": [ + "10" + ], "filament_pre_cooling_temperature": [ "0" ], @@ -186,6 +237,21 @@ "filament_start_gcode": [ "; Filament gcode\n" ], + "filament_tower_interface_pre_extrusion_dist": [ + "10" + ], + "filament_tower_interface_pre_extrusion_length": [ + "0" + ], + "filament_tower_interface_print_temp": [ + "-1" + ], + "filament_tower_interface_purge_volume": [ + "20" + ], + "filament_tower_ironing_area": [ + "4" + ], "filament_type": [ "PLA" ], @@ -254,6 +320,9 @@ "overhang_threshold_participating_cooling": [ "95%" ], + "override_process_overhang_speed": [ + "0" + ], "pre_start_fan_time": [ "0" ], diff --git a/preset/Polymaker PLA Pro Metallic/BBL/P1S/BambuStudio/Polymaker PLA Pro Metallic @BBL P1S.json b/preset/Polymaker PLA Pro Metallic/BBL/P1S/BambuStudio/Polymaker PLA Pro Metallic @BBL P1S.json index f7dd6ad..349bd95 100644 --- a/preset/Polymaker PLA Pro Metallic/BBL/P1S/BambuStudio/Polymaker PLA Pro Metallic @BBL P1S.json +++ b/preset/Polymaker PLA Pro Metallic/BBL/P1S/BambuStudio/Polymaker PLA Pro Metallic @BBL P1S.json @@ -32,6 +32,12 @@ "cool_plate_temp_initial_layer": [ "35" ], + "cooling_perimeter_transition_distance": [ + "10" + ], + "cooling_slowdown_logic": [ + "uniform_cooling" + ], "counter_coef_1": [ "0" ], @@ -83,6 +89,9 @@ "filament_adhesiveness_category": [ "0" ], + "filament_bridge_speed": [ + "25" + ], "filament_change_length": [ "10" ], @@ -98,9 +107,36 @@ "filament_density": [ "1.23" ], + "filament_dev_ams_drying_ams_limitations": [ + "" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "0" + ], + "filament_dev_ams_drying_temperature": [ + "0" + ], + "filament_dev_ams_drying_time": [ + "0" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "0" + ], + "filament_dev_chamber_drying_time": [ + "0" + ], + "filament_dev_drying_cooling_temperature": [ + "0" + ], + "filament_dev_drying_softening_temperature": [ + "0" + ], "filament_diameter": [ "1.75" ], + "filament_enable_overhang_speed": [ + "1" + ], "filament_end_gcode": [ "; filament end gcode\n" ], @@ -123,12 +159,27 @@ "1" ], "filament_max_volumetric_speed": [ - "16" + "12" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_notes": "", + "filament_overhang_1_4_speed": [ + "0" + ], + "filament_overhang_2_4_speed": [ + "0" + ], + "filament_overhang_3_4_speed": [ + "0" + ], + "filament_overhang_4_4_speed": [ + "0" + ], + "filament_overhang_totally_speed": [ + "10" + ], "filament_pre_cooling_temperature": [ "0" ], @@ -186,6 +237,21 @@ "filament_start_gcode": [ "; Filament gcode\n" ], + "filament_tower_interface_pre_extrusion_dist": [ + "10" + ], + "filament_tower_interface_pre_extrusion_length": [ + "0" + ], + "filament_tower_interface_print_temp": [ + "-1" + ], + "filament_tower_interface_purge_volume": [ + "20" + ], + "filament_tower_ironing_area": [ + "4" + ], "filament_type": [ "PLA" ], @@ -254,6 +320,9 @@ "overhang_threshold_participating_cooling": [ "95%" ], + "override_process_overhang_speed": [ + "0" + ], "pre_start_fan_time": [ "0" ], diff --git a/preset/Polymaker PLA Pro Metallic/BBL/P2S/BambuStudio/Polymaker PLA Pro Metallic @BBL P2S.json b/preset/Polymaker PLA Pro Metallic/BBL/P2S/BambuStudio/Polymaker PLA Pro Metallic @BBL P2S.json index c6c3161..1ed45fc 100644 --- a/preset/Polymaker PLA Pro Metallic/BBL/P2S/BambuStudio/Polymaker PLA Pro Metallic @BBL P2S.json +++ b/preset/Polymaker PLA Pro Metallic/BBL/P2S/BambuStudio/Polymaker PLA Pro Metallic @BBL P2S.json @@ -29,6 +29,12 @@ "cool_plate_temp_initial_layer": [ "35" ], + "cooling_perimeter_transition_distance": [ + "10" + ], + "cooling_slowdown_logic": [ + "uniform_cooling" + ], "counter_coef_1": [ "0" ], @@ -80,6 +86,9 @@ "filament_adhesiveness_category": [ "0" ], + "filament_bridge_speed": [ + "25" + ], "filament_change_length": [ "10" ], @@ -95,9 +104,36 @@ "filament_density": [ "1.23" ], + "filament_dev_ams_drying_ams_limitations": [ + "" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "0" + ], + "filament_dev_ams_drying_temperature": [ + "0" + ], + "filament_dev_ams_drying_time": [ + "0" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "0" + ], + "filament_dev_chamber_drying_time": [ + "0" + ], + "filament_dev_drying_cooling_temperature": [ + "0" + ], + "filament_dev_drying_softening_temperature": [ + "0" + ], "filament_diameter": [ "1.75" ], + "filament_enable_overhang_speed": [ + "1" + ], "filament_end_gcode": [ "; filament end gcode\n" ], @@ -120,12 +156,27 @@ "1" ], "filament_max_volumetric_speed": [ - "15" + "12" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_notes": "", + "filament_overhang_1_4_speed": [ + "0" + ], + "filament_overhang_2_4_speed": [ + "0" + ], + "filament_overhang_3_4_speed": [ + "0" + ], + "filament_overhang_4_4_speed": [ + "0" + ], + "filament_overhang_totally_speed": [ + "10" + ], "filament_pre_cooling_temperature": [ "0" ], @@ -183,6 +234,21 @@ "filament_start_gcode": [ "; Filament gcode\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM106 P10 S0 ; turn off left aux fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n" ], + "filament_tower_interface_pre_extrusion_dist": [ + "10" + ], + "filament_tower_interface_pre_extrusion_length": [ + "0" + ], + "filament_tower_interface_print_temp": [ + "-1" + ], + "filament_tower_interface_purge_volume": [ + "20" + ], + "filament_tower_ironing_area": [ + "4" + ], "filament_type": [ "PLA" ], @@ -251,6 +317,9 @@ "overhang_threshold_participating_cooling": [ "95%" ], + "override_process_overhang_speed": [ + "0" + ], "pre_start_fan_time": [ "0" ], diff --git a/preset/Polymaker PLA Pro/BBL/A1/BambuStudio/Polymaker PLA Pro @BBL A1.json b/preset/Polymaker PLA Pro/BBL/A1/BambuStudio/Polymaker PLA Pro @BBL A1.json new file mode 100644 index 0000000..7dec35a --- /dev/null +++ b/preset/Polymaker PLA Pro/BBL/A1/BambuStudio/Polymaker PLA Pro @BBL A1.json @@ -0,0 +1,369 @@ +{ + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "chamber_temperatures": [ + "0" + ], + "circle_compensation_speed": [ + "200" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 mini 0.4 nozzle" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "cooling_perimeter_transition_distance": [ + "10" + ], + "cooling_slowdown_logic": [ + "uniform_cooling" + ], + "counter_coef_1": [ + "0" + ], + "counter_coef_2": [ + "0.025" + ], + "counter_coef_3": [ + "-0.11" + ], + "counter_limit_max": [ + "0.05" + ], + "counter_limit_min": [ + "-0.04" + ], + "default_filament_colour": [ + "" + ], + "diameter_limit": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_adaptive_volumetric_speed": [ + "0" + ], + "filament_adhesiveness_category": [ + "0" + ], + "filament_bridge_speed": [ + "25" + ], + "filament_change_length": [ + "10" + ], + "filament_change_length_nc": [ + "10" + ], + "filament_cooling_before_tower": [ + "10" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "1.23" + ], + "filament_dev_ams_drying_ams_limitations": [ + "" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "0" + ], + "filament_dev_ams_drying_temperature": [ + "0" + ], + "filament_dev_ams_drying_time": [ + "0" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "0" + ], + "filament_dev_chamber_drying_time": [ + "0" + ], + "filament_dev_drying_cooling_temperature": [ + "0" + ], + "filament_dev_drying_softening_temperature": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_enable_overhang_speed": [ + "1" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_volumetric_speed": [ + "0" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_notes": "", + "filament_overhang_1_4_speed": [ + "0" + ], + "filament_overhang_2_4_speed": [ + "0" + ], + "filament_overhang_3_4_speed": [ + "0" + ], + "filament_overhang_4_4_speed": [ + "0" + ], + "filament_overhang_totally_speed": [ + "10" + ], + "filament_pre_cooling_temperature": [ + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0" + ], + "filament_prime_volume": [ + "45" + ], + "filament_prime_volume_nc": [ + "60" + ], + "filament_printable": [ + "3" + ], + "filament_ramming_travel_time": [ + "0" + ], + "filament_ramming_travel_time_nc": [ + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1" + ], + "filament_retract_length_nc": [ + "10" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_scarf_gap": [ + "0" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_settings_id": [ + "Polymaker PLA Pro @BBL A1" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "filament_tower_interface_pre_extrusion_dist": [ + "10" + ], + "filament_tower_interface_pre_extrusion_length": [ + "0" + ], + "filament_tower_interface_print_temp": [ + "-1" + ], + "filament_tower_interface_purge_volume": [ + "20" + ], + "filament_tower_ironing_area": [ + "4" + ], + "filament_type": [ + "PLA" + ], + "filament_velocity_adaptation_factor": [ + "1" + ], + "filament_vendor": [ + "Polymaker" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "from": "User", + "full_fan_speed_layer": [ + "0" + ], + "hole_coef_1": [ + "0" + ], + "hole_coef_2": [ + "-0.025" + ], + "hole_coef_3": [ + "0.28" + ], + "hole_limit_max": [ + "0.25" + ], + "hole_limit_min": [ + "0.08" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "impact_strength_z": [ + "0" + ], + "long_retractions_when_ec": [ + "0" + ], + "name": "Polymaker PLA Pro @BBL A1", + "no_slow_down_for_cooling_on_outwalls": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "overhang_threshold_participating_cooling": [ + "95%" + ], + "override_process_overhang_speed": [ + "0" + ], + "pre_start_fan_time": [ + "0" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "3" + ], + "retraction_distances_when_ec": [ + "10" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "supertack_plate_temp": [ + "45" + ], + "supertack_plate_temp_initial_layer": [ + "45" + ], + "temperature_vitrification": [ + "55" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "version": "0.0.0.0", + "volumetric_speed_coefficients": [ + "" + ], + "idle_temperature": 0, + "filament_id": "PMPL25" +} \ No newline at end of file diff --git a/preset/Polymaker PLA Pro/BBL/H2C/BambuStudio/Polymaker PLA Pro @BBL H2C.json b/preset/Polymaker PLA Pro/BBL/H2C/BambuStudio/Polymaker PLA Pro @BBL H2C.json index 466ca62..8816fd1 100644 --- a/preset/Polymaker PLA Pro/BBL/H2C/BambuStudio/Polymaker PLA Pro @BBL H2C.json +++ b/preset/Polymaker PLA Pro/BBL/H2C/BambuStudio/Polymaker PLA Pro @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL25", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30" diff --git a/preset/Polymaker PLA Pro/BBL/H2D/BambuStudio/Polymaker PLA Pro @BBL H2D.json b/preset/Polymaker PLA Pro/BBL/H2D/BambuStudio/Polymaker PLA Pro @BBL H2D.json index b702d8e..619036e 100644 --- a/preset/Polymaker PLA Pro/BBL/H2D/BambuStudio/Polymaker PLA Pro @BBL H2D.json +++ b/preset/Polymaker PLA Pro/BBL/H2D/BambuStudio/Polymaker PLA Pro @BBL H2D.json @@ -29,6 +29,12 @@ "cool_plate_temp_initial_layer": [ "35" ], + "cooling_perimeter_transition_distance": [ + "10" + ], + "cooling_slowdown_logic": [ + "uniform_cooling" + ], "counter_coef_1": [ "0" ], @@ -80,6 +86,9 @@ "filament_adhesiveness_category": [ "0" ], + "filament_bridge_speed": [ + "25" + ], "filament_change_length": [ "10" ], @@ -95,9 +104,36 @@ "filament_density": [ "1.23" ], + "filament_dev_ams_drying_ams_limitations": [ + "" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "0" + ], + "filament_dev_ams_drying_temperature": [ + "0" + ], + "filament_dev_ams_drying_time": [ + "0" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "0" + ], + "filament_dev_chamber_drying_time": [ + "0" + ], + "filament_dev_drying_cooling_temperature": [ + "0" + ], + "filament_dev_drying_softening_temperature": [ + "0" + ], "filament_diameter": [ "1.75" ], + "filament_enable_overhang_speed": [ + "1" + ], "filament_end_gcode": [ "; filament end gcode\n" ], @@ -120,12 +156,27 @@ "1" ], "filament_max_volumetric_speed": [ - "20" + "12" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_notes": "", + "filament_overhang_1_4_speed": [ + "0" + ], + "filament_overhang_2_4_speed": [ + "0" + ], + "filament_overhang_3_4_speed": [ + "0" + ], + "filament_overhang_4_4_speed": [ + "0" + ], + "filament_overhang_totally_speed": [ + "10" + ], "filament_pre_cooling_temperature": [ "0" ], @@ -186,6 +237,21 @@ "filament_start_gcode": [ "; Filament gcode\n" ], + "filament_tower_interface_pre_extrusion_dist": [ + "10" + ], + "filament_tower_interface_pre_extrusion_length": [ + "0" + ], + "filament_tower_interface_print_temp": [ + "-1" + ], + "filament_tower_interface_purge_volume": [ + "20" + ], + "filament_tower_ironing_area": [ + "4" + ], "filament_type": [ "PLA" ], @@ -254,6 +320,9 @@ "overhang_threshold_participating_cooling": [ "95%" ], + "override_process_overhang_speed": [ + "0" + ], "pre_start_fan_time": [ "0" ], diff --git a/preset/Polymaker PLA Pro/BBL/P1S/BambuStudio/Polymaker PLA Pro @BBL P1S.json b/preset/Polymaker PLA Pro/BBL/P1S/BambuStudio/Polymaker PLA Pro @BBL P1S.json index 533019d..538867f 100644 --- a/preset/Polymaker PLA Pro/BBL/P1S/BambuStudio/Polymaker PLA Pro @BBL P1S.json +++ b/preset/Polymaker PLA Pro/BBL/P1S/BambuStudio/Polymaker PLA Pro @BBL P1S.json @@ -32,6 +32,12 @@ "cool_plate_temp_initial_layer": [ "35" ], + "cooling_perimeter_transition_distance": [ + "10" + ], + "cooling_slowdown_logic": [ + "uniform_cooling" + ], "counter_coef_1": [ "0" ], @@ -83,6 +89,9 @@ "filament_adhesiveness_category": [ "0" ], + "filament_bridge_speed": [ + "25" + ], "filament_change_length": [ "10" ], @@ -98,9 +107,36 @@ "filament_density": [ "1.23" ], + "filament_dev_ams_drying_ams_limitations": [ + "" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "0" + ], + "filament_dev_ams_drying_temperature": [ + "0" + ], + "filament_dev_ams_drying_time": [ + "0" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "0" + ], + "filament_dev_chamber_drying_time": [ + "0" + ], + "filament_dev_drying_cooling_temperature": [ + "0" + ], + "filament_dev_drying_softening_temperature": [ + "0" + ], "filament_diameter": [ "1.75" ], + "filament_enable_overhang_speed": [ + "1" + ], "filament_end_gcode": [ "; filament end gcode\n" ], @@ -123,12 +159,27 @@ "1" ], "filament_max_volumetric_speed": [ - "16" + "12" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_notes": "", + "filament_overhang_1_4_speed": [ + "0" + ], + "filament_overhang_2_4_speed": [ + "0" + ], + "filament_overhang_3_4_speed": [ + "0" + ], + "filament_overhang_4_4_speed": [ + "0" + ], + "filament_overhang_totally_speed": [ + "10" + ], "filament_pre_cooling_temperature": [ "0" ], @@ -186,6 +237,21 @@ "filament_start_gcode": [ "; Filament gcode\n" ], + "filament_tower_interface_pre_extrusion_dist": [ + "10" + ], + "filament_tower_interface_pre_extrusion_length": [ + "0" + ], + "filament_tower_interface_print_temp": [ + "-1" + ], + "filament_tower_interface_purge_volume": [ + "20" + ], + "filament_tower_ironing_area": [ + "4" + ], "filament_type": [ "PLA" ], @@ -254,6 +320,9 @@ "overhang_threshold_participating_cooling": [ "95%" ], + "override_process_overhang_speed": [ + "0" + ], "pre_start_fan_time": [ "0" ], diff --git a/preset/Polymaker PLA Pro/BBL/P2S/BambuStudio/Polymaker PLA Pro @BBL P2S.json b/preset/Polymaker PLA Pro/BBL/P2S/BambuStudio/Polymaker PLA Pro @BBL P2S.json index 82b2b69..ef3ebe5 100644 --- a/preset/Polymaker PLA Pro/BBL/P2S/BambuStudio/Polymaker PLA Pro @BBL P2S.json +++ b/preset/Polymaker PLA Pro/BBL/P2S/BambuStudio/Polymaker PLA Pro @BBL P2S.json @@ -29,6 +29,12 @@ "cool_plate_temp_initial_layer": [ "35" ], + "cooling_perimeter_transition_distance": [ + "10" + ], + "cooling_slowdown_logic": [ + "uniform_cooling" + ], "counter_coef_1": [ "0" ], @@ -80,6 +86,9 @@ "filament_adhesiveness_category": [ "0" ], + "filament_bridge_speed": [ + "25" + ], "filament_change_length": [ "10" ], @@ -95,9 +104,36 @@ "filament_density": [ "1.23" ], + "filament_dev_ams_drying_ams_limitations": [ + "" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "0" + ], + "filament_dev_ams_drying_temperature": [ + "0" + ], + "filament_dev_ams_drying_time": [ + "0" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "0" + ], + "filament_dev_chamber_drying_time": [ + "0" + ], + "filament_dev_drying_cooling_temperature": [ + "0" + ], + "filament_dev_drying_softening_temperature": [ + "0" + ], "filament_diameter": [ "1.75" ], + "filament_enable_overhang_speed": [ + "1" + ], "filament_end_gcode": [ "; filament end gcode\n" ], @@ -120,12 +156,27 @@ "1" ], "filament_max_volumetric_speed": [ - "15" + "12" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_notes": "", + "filament_overhang_1_4_speed": [ + "0" + ], + "filament_overhang_2_4_speed": [ + "0" + ], + "filament_overhang_3_4_speed": [ + "0" + ], + "filament_overhang_4_4_speed": [ + "0" + ], + "filament_overhang_totally_speed": [ + "10" + ], "filament_pre_cooling_temperature": [ "0" ], @@ -183,6 +234,21 @@ "filament_start_gcode": [ "; Filament gcode\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM106 P10 S0 ; turn off left aux fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n" ], + "filament_tower_interface_pre_extrusion_dist": [ + "10" + ], + "filament_tower_interface_pre_extrusion_length": [ + "0" + ], + "filament_tower_interface_print_temp": [ + "-1" + ], + "filament_tower_interface_purge_volume": [ + "20" + ], + "filament_tower_ironing_area": [ + "4" + ], "filament_type": [ "PLA" ], @@ -251,6 +317,9 @@ "overhang_threshold_participating_cooling": [ "95%" ], + "override_process_overhang_speed": [ + "0" + ], "pre_start_fan_time": [ "0" ], diff --git a/preset/Polymaker PLA/BBL/H2C/BambuStudio/Polymaker PLA @BBL H2C.json b/preset/Polymaker PLA/BBL/H2C/BambuStudio/Polymaker PLA @BBL H2C.json index 105314e..94a8a0b 100644 --- a/preset/Polymaker PLA/BBL/H2C/BambuStudio/Polymaker PLA @BBL H2C.json +++ b/preset/Polymaker PLA/BBL/H2C/BambuStudio/Polymaker PLA @BBL H2C.json @@ -144,7 +144,7 @@ "75" ], "filament_id": "PMPL24", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "description": " ", "setting_id": "GFSL99_20", "filament_prime_volume": [ "30"