diff --git a/pimm/drivers/can.py b/pimm/drivers/can.py
new file mode 100644
index 00000000..1a0e36b2
--- /dev/null
+++ b/pimm/drivers/can.py
@@ -0,0 +1,180 @@
+import math
+import struct
+import time
+from abc import ABC, abstractmethod
+from dataclasses import dataclass
+from enum import Enum
+from typing import Generator, List
+
+import can
+import numpy as np
+
+import ironic2 as ir
+
+
+class CommandType(Enum):
+    TORQUE = 0
+    VELOCITY = 1
+    POSITION = 2
+
+
+@dataclass
+class Command:
+    type: CommandType
+    value: np.array  # Value
+
+    @staticmethod
+    def position(value) -> 'Command':
+        if isinstance(value, (int, float)):
+            return Command(CommandType.POSITION, np.array([value]))
+        else:
+            return Command(CommandType.POSITION, np.array(value))
+
+    @staticmethod
+    def velocity(value) -> 'Command':
+        if isinstance(value, (int, float)):
+            return Command(CommandType.VELOCITY, np.array([value]))
+        else:
+            return Command(CommandType.VELOCITY, np.array(value))
+
+
+@ABC
+class MotorDriver:
+    "Interface for vectorised motor drivers."
+    # TODO: Now one driver manages ALL motors, though potentially we can extend to multiple
+    # drivers on one bus. In this case the higher-level logic must be able to route incoming
+    # messages to particular driver.
+
+    @abstractmethod
+    def decode(self, msg: can.Message, state: np.array) -> None:
+        """Implementations must know how to map arbitration_id to motor index.
+
+           Args:
+             msg: CAN message that we received.
+             state: Output np.array of (total_motors, 4) to write to:
+                  4 stands for [timestamp, position, velocity, torque]
+                    timestamp: UNIX epoch (seconds)
+                    position:  Output shaft position in  radians, cla
+                    velocity:  Output shaft velocity in rad/sec
+                    torque:    Motor torque
+        """
+        pass
+
+    @abstractmethod
+    def encode(self, cmd: Command) -> Generator[can.Message]:
+        pass
+
+    @abstractmethod
+    def ping(self) -> Generator[can.Message]:
+        "Message to send to motor if there were no commands for some time"
+        pass
+
+
+class KTechMGMotorDriver(MotorDriver):
+
+    @dataclass
+    class MotorSpec:
+        gear_ratio: float
+        max_speed: float  # TODO: I still don't fully understand the dimension of this
+
+    def __init__(self, motors: List[MotorSpec], start_can_id: int = 0x140):
+        self._start_can_id = start_can_id
+        self._num_motors = len(motors)
+        self._specs = motors
+
+    def decode(self, msg: can.Message, state: np.array) -> None:
+        i = msg.arbitration_id - msg.arbitration_id
+        if 0 <= i < self._num_motors:
+            _, _, torque, vel, pos = struct.unpack('<bbhhH', msg.data)
+            # TODO: Figure out the actual coeffcients
+            state[0, i] = msg.timestamp
+            state[1, i] = pos
+            state[2, i] = vel
+            state[3, i] = torque / 2048 * 33
+
+    def encode(self, cmd: Command) -> Generator[can.Message]:
+        match cmd.type:
+            case CommandType.VELOCITY:
+                for i, value in enumerate(cmd.value):
+                    data = struct.pack('<Ii', 0xA2, int(value * self._specs[i] * 100))
+                    yield can.Message(arbitration_id=self._start_can_id + i, data=data, is_extended_id=False)
+            case CommandType.POSITION:
+                for i, value in enumerate(cmd.value):
+                    max_speed = int(self._specs[i].max_speed * self._specs[i].gear_ratio)
+                    data = struct.pack('<HHi', 0xA4, max_speed,
+                                       int(math.degrees(value) * self._specs[i].gear_ratio * 100))
+                    yield can.Message(arbitration_id=self._start_can_id + i, data=data, is_extended_id=False)
+            case CommandType.TORQUE:
+                raise NotImplementedError('Torque control is not implemented yet for K-Tech motors')
+
+    def ping(self) -> Generator[can.Message]:
+        data = struct.pack('<II', 0x9C, 0x00)
+        for i in range(self._num_motors):
+            yield can.Message(arbitration_id=self._start_can_id + i, data=data, is_extended_id=False)
+
+
+class CanBusDriver:
+    commands = ir.SignalReader()  # Assume the data is Command
+    state_writer = ir.SignalEmitter()  # The data is np.array of shape 3xN, where N is number of motors
+
+    def __init__(self, bus_channel: str, num_motors: int, driver: MotorDriver, ping_every_sec: float) -> None:
+        self._bus_channel = bus_channel
+        self._driver = driver
+        self._num_motors = num_motors
+        self._ping_every_sec = ping_every_sec
+
+    def run(self, should_stop: ir.SignalReader):
+        commands = ir.ValueUpdated(self.commands)
+        last_command_time = time.monotonic()
+
+        state = np.zeros((4, self._num_motors), dtype=np.float32)  # Timestamp, position, velocity, torque
+
+        with can.interface.Bus(channel=self._bus_channel, interface='socketcan') as bus:
+            try:
+                while not ir.signal_value(should_stop):
+                    state_updated = False
+                    while msg := bus.recv(0) is not None:
+                        self._driver.decode(msg, state)
+                        state_updated = True
+
+                    if state_updated:
+                        self.state_writer.emit(state[1:], np.max(state[0]))
+
+                    cmd, cmd_updated = ir.signal_value(commands, (None, False))
+                    if cmd_updated:
+                        for msg in self._driver.encode(cmd):
+                            bus.send(msg)
+                        last_command_time = time.monotonic()
+                    elif time.monotonic() - last_command_time > self._ping_every_sec:
+                        for msg in self._driver.ping():
+                            bus.send(msg)
+                    else:
+                        time.sleep(0.5 / 1000)  # We try to run 1kHz
+            finally:
+                cmd = Command.velocity(np.zeros(self._num_motors))
+                for msg in self._driver.encode(cmd):
+                    bus.send(msg)
+                time.sleep(0.5)
+
+
+if __name__ == "__main__":
+    spec = KTechMGMotorDriver.MotorSpec(gear_ratio=3.6, max_speed=360 * 2)
+    can_driver = CanBusDriver('can0', num_motors=1, driver=KTechMGMotorDriver([spec]), ping_every_sec=1 / 200)
+
+    with ir.World() as world:
+        command_writer, can_driver.commands = world.pipe()
+        # TODO: Should be shared memory for performance
+        can_driver.state_writer, state_reader = world.pipe()
+
+        commands = [(0, Command.position(0)), (30., Command.position(2 * np.pi))]
+
+        world.start(can_driver.run)
+        i, start = 0, time.monotonic()
+        while i < len(commands):
+            t, cmd = commands[i]
+            if time.monotonic() - start > t:
+                i += 1
+                command_writer.emit(cmd)
+            else:
+                # TODO: Probably should output the state
+                time.sleep(0.01)
diff --git a/pyproject.toml b/pyproject.toml
index 3149421f..fcd71d8f 100644
--- a/pyproject.toml
+++ b/pyproject.toml
@@ -44,6 +44,7 @@ hardware = [
     "phoenix6==24.3.0",
     "pygame==2.5.2",
     "pyserial", # For DH gripper
+    "python-can",
 ]
 dev = [
     "jupyter",