Openview Desktop Client: Some value plots are missing

[stardusthamster]

On healthy Pi 5 I installed the firmware healthypi5_basic_st7796.uf2 black basic version 1.1.3

I attached the temperature sensor and some values are displayed on the healthy pi for the temperature.

I connected the healthy pi via USB to my pc. (running Ubuntu and using the linux version OpenView2-linux_2.1.10.zip

I started the openview 2 app. There is no graph displayed for the temperature. There are only the graphs for heart rate and respiration, even if these sensors are not attached (this is another issue).

But the temperature graph should be there but is not:

[suvarna84]

Thank you for your message.

Currently, the temperature data on the HealthyPi 5 is displayed as a numeric value only and does not have an associated plot/graph in the OpenView 2 application.

Regarding the plots for heart rate and respiration showing up even when the sensors are not connected — thank you for bringing this to our attention. We will verify this behavior and investigate further. Any necessary updates or fixes will be shared in due course.

Please let us know if you have any further questions or feedback.

[stardusthamster]

Ok, then the graph is not missing but the value is! It displayes 0 but should have some other value, in my test it should show the room temperature