LoongArch: Add ELF binary support for kexec_file

This patch creates kexec_elf_ops to load ELF binary file for
kexec_file_load() syscall.

However, for `kbuf->memsz` and `kbuf->buf_min`, special handling is
required, and the generic `kexec_elf_load()` cannot be used directly.

$ readelf -l vmlinux
...
   Type           Offset             VirtAddr           PhysAddr
                  FileSiz            MemSiz              Flags Align
   LOAD           0x0000000000010000 0x9000000000200000 0x9000000000200000
                  0x0000000002747a00 0x000000000287a0d8  RWE 0x10000
   NOTE           0x0000000000000000 0x0000000000000000 0x0000000000000000
                  0x0000000000000000 0x0000000000000000  R      0x8

phdr->p_paddr should have been a physical address, but it is a virtual
address on the current LoongArch. This will cause kexec_file to fail
when loading the kernel and need to be converted to a physical address.

From the above MemSiz, it can be seen that 0x287a0d8 isn't page aligned.
Although kexec_add_buffer() will perform PAGE_SIZE alignment on kbuf->
memsz, there is still a stampeding in the loaded kernel space and initrd
space. The initrd resolution failed when starting the second kernel.

It can be known from the link script vmlinux.lds.S that,
    BSS_SECTION(0, SZ_64K, 8)
    . = ALIGN(PECOFF_SEGMENT_ALIGN);

It needs to be aligned according to SZ_64K, so that after alignment, its
size is consistent with _kernel_asize.

The basic usage (vmlinux):

1) Load second kernel image:
 # kexec -s -l vmlinux --initrd=initrd.img --reuse-cmdline

2) Startup second kernel:
 # kexec -e

Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Author: tangyouling

arch/loongarch/Kconfig

@@ -639,6 +639,7 @@ config ARCH_SUPPORTS_KEXEC_FILE
 config ARCH_SELECTS_KEXEC_FILE
 	def_bool 64BIT
 	depends on KEXEC_FILE
+	select KEXEC_ELF
 	select RELOCATABLE
 	select HAVE_IMA_KEXEC if IMA
 

arch/loongarch/include/asm/kexec.h

@@ -43,6 +43,7 @@ struct kimage_arch {
 
 #ifdef CONFIG_KEXEC_FILE
 extern const struct kexec_file_ops kexec_efi_ops;
+extern const struct kexec_file_ops kexec_elf_ops;
 
 int arch_kimage_file_post_load_cleanup(struct kimage *image);
 #define arch_kimage_file_post_load_cleanup arch_kimage_file_post_load_cleanup

arch/loongarch/kernel/Makefile

@@ -62,7 +62,7 @@ obj-$(CONFIG_MAGIC_SYSRQ)	+= sysrq.o
 obj-$(CONFIG_RELOCATABLE)	+= relocate.o
 
 obj-$(CONFIG_KEXEC_CORE)	+= machine_kexec.o relocate_kernel.o
-obj-$(CONFIG_KEXEC_FILE)	+= machine_kexec_file.o kexec_efi.o
+obj-$(CONFIG_KEXEC_FILE)	+= machine_kexec_file.o kexec_efi.o kexec_elf.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 
 obj-$(CONFIG_UNWINDER_GUESS)	+= unwind_guess.o

arch/loongarch/kernel/kexec_elf.c

@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Load ELF vmlinux file for the kexec_file_load syscall.
+ *
+ * Author: Youling Tang <tangyouling@kylinos.cn>
+ * Copyright (C) 2025 KylinSoft Corporation.
+ */
+
+#define pr_fmt(fmt)	"kexec_file(ELF): " fmt
+
+#include <linux/elf.h>
+#include <linux/kexec.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/memblock.h>
+#include <asm/setup.h>
+
+#define elf_kexec_probe kexec_elf_probe
+
+static int _elf_kexec_load(struct kimage *image,
+			   struct elfhdr *ehdr, struct kexec_elf_info *elf_info,
+			   struct kexec_buf *kbuf, unsigned long *text_offset)
+{
+	int i, ret = -1;
+
+	/* Read in the PT_LOAD segments. */
+	for (i = 0; i < ehdr->e_phnum; i++) {
+		size_t size;
+		const struct elf_phdr *phdr;
+
+		phdr = &elf_info->proghdrs[i];
+		if (phdr->p_type != PT_LOAD)
+			continue;
+
+		size = phdr->p_filesz;
+		if (size > phdr->p_memsz)
+			size = phdr->p_memsz;
+
+		kbuf->buffer = (void *)elf_info->buffer + phdr->p_offset;
+		kbuf->bufsz = size;
+		kbuf->buf_align = phdr->p_align;
+		*text_offset = __pa(phdr->p_paddr);
+		kbuf->buf_min = *text_offset;
+		kbuf->memsz = ALIGN(phdr->p_memsz, SZ_64K);
+		kbuf->mem = KEXEC_BUF_MEM_UNKNOWN;
+		ret = kexec_add_buffer(kbuf);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+static void *elf_kexec_load(struct kimage *image,
+			    char *kernel, unsigned long kernel_len,
+			    char *initrd, unsigned long initrd_len,
+			    char *cmdline, unsigned long cmdline_len)
+{
+	int ret;
+	unsigned long text_offset, kernel_segment_number;
+	struct elfhdr ehdr;
+	struct kexec_buf kbuf;
+	struct kexec_elf_info elf_info;
+	struct kexec_segment *kernel_segment;
+
+	ret = kexec_build_elf_info(kernel, kernel_len, &ehdr, &elf_info);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	/*
+	 * Load the kernel
+	 * FIXME: Non-relocatable kernel rejected for kexec_file (require CONFIG_RELOCATABLE)
+	 */
+	kbuf.image = image;
+	kbuf.buf_max = ULONG_MAX;
+	kbuf.top_down = false;
+
+	kernel_segment_number = image->nr_segments;
+
+	ret = _elf_kexec_load(image, &ehdr, &elf_info, &kbuf, &text_offset);
+	if (ret < 0)
+		goto out;
+
+	/* Load additional data */
+	kernel_segment = &image->segment[kernel_segment_number];
+	ret = load_other_segments(image, kernel_segment->mem, kernel_segment->memsz,
+				  initrd, initrd_len, cmdline, cmdline_len);
+	if (ret < 0)
+		goto out;
+
+	/* Make sure the second kernel jumps to the correct "kernel_entry". */
+	image->start = kernel_segment->mem + __pa(ehdr.e_entry) - text_offset;
+
+	kexec_dprintk("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      kernel_segment->mem, kbuf.bufsz, kernel_segment->memsz);
+
+out:
+	kexec_free_elf_info(&elf_info);
+	return ret ? ERR_PTR(ret) : NULL;
+}
+
+const struct kexec_file_ops kexec_elf_ops = {
+	.probe = elf_kexec_probe,
+	.load  = elf_kexec_load,
+};

arch/loongarch/kernel/machine_kexec_file.c

@@ -22,6 +22,7 @@
 
 const struct kexec_file_ops * const kexec_file_loaders[] = {
 	&kexec_efi_ops,
+	&kexec_elf_ops,
 	NULL
 };