Build Plate Temperature Wrong

[AlexanderWMacFarlaneIV]

The build plate temperature is 80 when it has been set to 105 in Cura.

[AlexanderWMacFarlaneIV]

Cura Version
5.7.1

Operating System
Linux

Printer
Snapmaker Artisan

Reproduction steps
Create 2 custom materials and set the build plate temperature to 105 in both.

Select snapmaker Artisan as the printer after installing the plugin from the marketplace.

Change both build plate temperature and initial build plate temperature to 105 for both materials in the print settings,

Slice.

Run Gcode on a Snapmaker Artisan printer

Actual results
The build plate temperature only goes up to 80.

Expected results
The build plate temperature should be 105

[AlexanderWMacFarlaneIV]

Noble_Woman_Cura.txt
Noble_Woman_Luban.txt

Attached are 2 gcode files renamed to .txt.

Cura with the snapmaker plugin is not properly generating the header so the build plate temperature is wrong.

I can get it to work by pating a header from gcode generated by Luban onto gcode generated by Cura so the problem is there.

[AlexanderWMacFarlaneIV]

More information and some suggestions can be found whete I first posted this:

Ultimaker/Cura#19019