diff --git a/Utility Mods/SCDefenseBlocks/Data/Scripts/OneFuckingFolderDeeper/FieldGenerator/FieldGenerator_Config.cs b/Utility Mods/SCDefenseBlocks/Data/Scripts/OneFuckingFolderDeeper/FieldGenerator/FieldGenerator_Config.cs
index 4822e35e5..c9be5667c 100644
--- a/Utility Mods/SCDefenseBlocks/Data/Scripts/OneFuckingFolderDeeper/FieldGenerator/FieldGenerator_Config.cs	
+++ b/Utility Mods/SCDefenseBlocks/Data/Scripts/OneFuckingFolderDeeper/FieldGenerator/FieldGenerator_Config.cs	
@@ -33,8 +33,8 @@ public class Generator_Settings
         public float MaxPowerDraw = 500.00f;
         public float MinPowerDraw = 50.00f;
 
-        public int MaxSiegeTime = 60;
-        public int MinSiegeTime = 15;
+        public int MaxSiegeTime = 60; // this refers to max time spent you are able to be in siege mode.
+        public int MinSiegeTime = 10; // this refers to min time spent sieging in the cooldown formula, any time spent in siege below this number will count as this value for the cooldown formula. thus the minimum cooldown time is this number * 2.
         public int SiegePowerDraw = 900;
         public float SiegeModeResistence = 0.9f;      
   
@@ -75,79 +75,79 @@ void LoadConfig(MyIni iniParser)
 
         void SaveConfig(MyIni iniParser)
         {
-            iniParser.Set(IniSection, nameof(MaxModuleCount), MaxModuleCount);
-            iniParser.SetComment(IniSection, nameof(MaxModuleCount),
-                " \n[Maximum number of upgrade modules that can be attached to the Field Generator core.]\n" +
-                "[Each core has 4 mounting points by default.]\n" +
-                "[Default: 4]");
-
-            iniParser.Set(IniSection, nameof(PerModuleAmount), PerModuleAmount);
-            iniParser.SetComment(IniSection, nameof(PerModuleAmount),
-                " \n[Amount of resistance each attached upgrade module provides.]\n" +
-                "[Default: 10.0]");
-
-            iniParser.Set(IniSection, nameof(MaxPowerDraw), MaxPowerDraw);
-            iniParser.SetComment(IniSection, nameof(MaxPowerDraw),
-                " \n[The maximum power draw (in MW) when the Field Generator is at full power.]\n" +
-                "[Default: 500 MW]");
-
-            iniParser.Set(IniSection, nameof(MinPowerDraw), MinPowerDraw);
-            iniParser.SetComment(IniSection, nameof(MinPowerDraw),
-                " \n[Baseline power draw (in MW) at minimum field power.]\n" +
-                "[Default: 50 MW]");
-
-            iniParser.Set(IniSection, nameof(MaxSiegeTime), MaxSiegeTime);
-            iniParser.SetComment(IniSection, nameof(MaxSiegeTime),
-                " \n[Maximum duration (in seconds) the Field Generator can remain in Siege mode.]\n" +
-                "[Default: 60s]\n");
-
-            iniParser.Set(IniSection, nameof(SiegePowerDraw), SiegePowerDraw);
-            iniParser.SetComment(IniSection, nameof(SiegePowerDraw),
-                " \n[Power draw (in MW) while Siege mode is active.]\n" +
-                "[Overrides normal scaled power draw.]\n" +
-                "[Default: 900 MW]");
-
-            iniParser.Set(IniSection, nameof(SiegeModeResistence), SiegeModeResistence);
-            iniParser.SetComment(IniSection, nameof(SiegeModeResistence),
-                " \n[Amount of damage resistance provided by Siege mode (0.0 to 1.0).]\n" +
-                "[Example: 0.9 means 90% damage reduction from normal.]\n" +
-                "[Default: 0.9]");
-
-            iniParser.Set(IniSection, nameof(SimplifiedMode), SimplifiedMode);
-            iniParser.SetComment(IniSection, nameof(SimplifiedMode),
-                " \n[Whether to disable (true) or enable (false) the advanced stability system.]\n" +
-                "[Default: true]");
-
-            iniParser.Set(IniSection, nameof(DamageEventThreshold), DamageEventThreshold);
-            iniParser.SetComment(IniSection, nameof(DamageEventThreshold),
-                " \n[Number of damage events (within ResetInterval) needed to trigger stability reduction.]\n" +
-                "[Default: 6]");
-
-            iniParser.Set(IniSection, nameof(ResetInterval), ResetInterval);
-            iniParser.SetComment(IniSection, nameof(ResetInterval),
-                " \n[Time interval (in seconds) between damage counter resets.]\n" +
-                "[Default: 3]");
-
-            iniParser.Set(IniSection, nameof(MinBlockCount), MinBlockCount);
-            iniParser.SetComment(IniSection, nameof(MinBlockCount),
-                " \n[Minimum grid block count used in the size-based stability calculation.]\n" +
-                "[Default: 2500]");
-
-            iniParser.Set(IniSection, nameof(MaxBlockCount), MaxBlockCount);
-            iniParser.SetComment(IniSection, nameof(MaxBlockCount),
-                " \n[Maximum grid block count used in the size-based stability calculation.]\n" +
-                "[Default: 35000]");
-
-            iniParser.Set(IniSection, nameof(SizeModifierMin), SizeModifierMin);
-            iniParser.SetComment(IniSection, nameof(SizeModifierMin),
-                " \n[The lower bound of the size modifier.]\n" +
-                "[Size Modifier can reduce or increase stability change based on the grid size. This Min is the Increase at Min Grid Size]\n" +
-                "[Default: 1.2]");
-
-            iniParser.Set(IniSection, nameof(SizeModifierMax), SizeModifierMax);
-            iniParser.SetComment(IniSection, nameof(SizeModifierMax),
-                " \n[The upper bound of the size modifier.]\n" +
-                "[Size Modifier can reduce or increase stability change based on the grid size. This Max is the Reduction at Max Grid Size]\n" +
+            iniParser.Set(IniSection, nameof(MaxModuleCount), MaxModuleCount);
+            iniParser.SetComment(IniSection, nameof(MaxModuleCount),
+                " \n[Maximum number of upgrade modules that can be attached to the Field Generator core.]\n" +
+                "[Each core has 4 mounting points by default.]\n" +
+                "[Default: 4]");
+
+            iniParser.Set(IniSection, nameof(PerModuleAmount), PerModuleAmount);
+            iniParser.SetComment(IniSection, nameof(PerModuleAmount),
+                " \n[Amount of resistance each attached upgrade module provides.]\n" +
+                "[Default: 10.0]");
+
+            iniParser.Set(IniSection, nameof(MaxPowerDraw), MaxPowerDraw);
+            iniParser.SetComment(IniSection, nameof(MaxPowerDraw),
+                " \n[The maximum power draw (in MW) when the Field Generator is at full power.]\n" +
+                "[Default: 500 MW]");
+
+            iniParser.Set(IniSection, nameof(MinPowerDraw), MinPowerDraw);
+            iniParser.SetComment(IniSection, nameof(MinPowerDraw),
+                " \n[Baseline power draw (in MW) at minimum field power.]\n" +
+                "[Default: 50 MW]");
+
+            iniParser.Set(IniSection, nameof(MaxSiegeTime), MaxSiegeTime);
+            iniParser.SetComment(IniSection, nameof(MaxSiegeTime),
+                " \n[Maximum duration (in seconds) the Field Generator can remain in Siege mode.]\n" +
+                "[Default: 60s]\n");
+
+            iniParser.Set(IniSection, nameof(SiegePowerDraw), SiegePowerDraw);
+            iniParser.SetComment(IniSection, nameof(SiegePowerDraw),
+                " \n[Power draw (in MW) while Siege mode is active.]\n" +
+                "[Overrides normal scaled power draw.]\n" +
+                "[Default: 900 MW]");
+
+            iniParser.Set(IniSection, nameof(SiegeModeResistence), SiegeModeResistence);
+            iniParser.SetComment(IniSection, nameof(SiegeModeResistence),
+                " \n[Amount of damage resistance provided by Siege mode (0.0 to 1.0).]\n" +
+                "[Example: 0.9 means 90% damage reduction from normal.]\n" +
+                "[Default: 0.9]");
+
+            iniParser.Set(IniSection, nameof(SimplifiedMode), SimplifiedMode);
+            iniParser.SetComment(IniSection, nameof(SimplifiedMode),
+                " \n[Whether to disable (true) or enable (false) the advanced stability system.]\n" +
+                "[Default: true]");
+
+            iniParser.Set(IniSection, nameof(DamageEventThreshold), DamageEventThreshold);
+            iniParser.SetComment(IniSection, nameof(DamageEventThreshold),
+                " \n[Number of damage events (within ResetInterval) needed to trigger stability reduction.]\n" +
+                "[Default: 6]");
+
+            iniParser.Set(IniSection, nameof(ResetInterval), ResetInterval);
+            iniParser.SetComment(IniSection, nameof(ResetInterval),
+                " \n[Time interval (in seconds) between damage counter resets.]\n" +
+                "[Default: 3]");
+
+            iniParser.Set(IniSection, nameof(MinBlockCount), MinBlockCount);
+            iniParser.SetComment(IniSection, nameof(MinBlockCount),
+                " \n[Minimum grid block count used in the size-based stability calculation.]\n" +
+                "[Default: 2500]");
+
+            iniParser.Set(IniSection, nameof(MaxBlockCount), MaxBlockCount);
+            iniParser.SetComment(IniSection, nameof(MaxBlockCount),
+                " \n[Maximum grid block count used in the size-based stability calculation.]\n" +
+                "[Default: 35000]");
+
+            iniParser.Set(IniSection, nameof(SizeModifierMin), SizeModifierMin);
+            iniParser.SetComment(IniSection, nameof(SizeModifierMin),
+                " \n[The lower bound of the size modifier.]\n" +
+                "[Size Modifier can reduce or increase stability change based on the grid size. This Min is the Increase at Min Grid Size]\n" +
+                "[Default: 1.2]");
+
+            iniParser.Set(IniSection, nameof(SizeModifierMax), SizeModifierMax);
+            iniParser.SetComment(IniSection, nameof(SizeModifierMax),
+                " \n[The upper bound of the size modifier.]\n" +
+                "[Size Modifier can reduce or increase stability change based on the grid size. This Max is the Reduction at Max Grid Size]\n" +
                 "[Default: 0.8]");
         }
 
diff --git a/Utility Mods/SCDefenseBlocks/Data/Scripts/OneFuckingFolderDeeper/FieldGenerator/FieldGenerator_Core.cs b/Utility Mods/SCDefenseBlocks/Data/Scripts/OneFuckingFolderDeeper/FieldGenerator/FieldGenerator_Core.cs
index cb8c55567..1dd275f28 100644
--- a/Utility Mods/SCDefenseBlocks/Data/Scripts/OneFuckingFolderDeeper/FieldGenerator/FieldGenerator_Core.cs	
+++ b/Utility Mods/SCDefenseBlocks/Data/Scripts/OneFuckingFolderDeeper/FieldGenerator/FieldGenerator_Core.cs	
@@ -471,7 +471,7 @@ private void EndSiegeMode()
 
             SiegeBlockEnabler(Block.CubeGrid.GetFatBlocks<IMyFunctionalBlock>(), true);
 
-            SiegeCooldownTime.Value = (SiegeElapsedTime.Value > Config.MinSiegeTime) ? (SiegeElapsedTime.Value * 2) : Config.MinSiegeTime;
+            SiegeCooldownTime.Value = 2 * (SiegeElapsedTime.Value > Config.MinSiegeTime ? SiegeElapsedTime.Value : Config.MinSiegeTime);
             SiegeElapsedTime.Value = 0;
             SiegeCooldownActive.Value = true;
         }