diff --git a/.project b/.project
new file mode 100644
index 00000000..b875b6cc
--- /dev/null
+++ b/.project
@@ -0,0 +1,11 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>embedded-bootcamp</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+	</buildSpec>
+	<natures>
+	</natures>
+</projectDescription>
diff --git a/nucleof072rb/.cproject b/nucleof072rb/.cproject
index 1e72a9d5..3bace36f 100644
--- a/nucleof072rb/.cproject
+++ b/nucleof072rb/.cproject
@@ -22,7 +22,7 @@
 							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid.732962077" name="Core" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_coreid" useByScannerDiscovery="false" value="0" valueType="string"/>
 							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.1565963249" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="NUCLEO-F072RB" valueType="string"/>
 							<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1118235792" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.6 || Debug || true || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.option.toolchain.value.workspace || NUCLEO-F072RB || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Drivers/STM32F0xx_HAL_Driver/Inc | ../Drivers/CMSIS/Include | ../Core/Inc | ../Drivers/STM32F0xx_HAL_Driver/Inc/Legacy | ../Drivers/CMSIS/Device/ST/STM32F0xx/Include ||  ||  || USE_HAL_DRIVER | STM32F072xB ||  || Drivers | Core/Startup | Core ||  ||  || ${workspace_loc:/${ProjName}/STM32F072RBTX_FLASH.ld} || true || NonSecure ||  || secure_nsclib.o ||  || None ||  ||  || " valueType="string"/>
-							<option id="com.st.stm32cube.ide.mcu.debug.option.cpuclock.374379599" superClass="com.st.stm32cube.ide.mcu.debug.option.cpuclock" value="48" valueType="string"/>
+							<option id="com.st.stm32cube.ide.mcu.debug.option.cpuclock.374379599" superClass="com.st.stm32cube.ide.mcu.debug.option.cpuclock" useByScannerDiscovery="false" value="48" valueType="string"/>
 							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.1112234843" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
 							<builder buildPath="${workspace_loc:/2021-Firmware-Bootcamp}/Debug" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.237391587" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
 							<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.1119024230" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
@@ -169,4 +169,5 @@
 		</scannerConfigBuildInfo>
 	</storageModule>
 	<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
+	<storageModule moduleId="refreshScope"/>
 </cproject>
\ No newline at end of file
diff --git a/nucleof072rb/.mxproject b/nucleof072rb/.mxproject
index 662fd90b..afc5da49 100644
--- a/nucleof072rb/.mxproject
+++ b/nucleof072rb/.mxproject
@@ -1,29 +1,33 @@
+[PreviousLibFiles]
+LibFiles=Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_spi.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_spi_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_def.h;Drivers\STM32F0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_cortex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_exti.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart_ex.h;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_spi.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_spi_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_gpio.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_dma.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_cortex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_exti.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart_ex.c;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_spi.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_spi_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_def.h;Drivers\STM32F0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_cortex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_exti.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart_ex.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\stm32f072xb.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\stm32f0xx.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\system_stm32f0xx.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\system_stm32f0xx.h;Drivers\CMSIS\Device\ST\STM32F0xx\Source\Templates\system_stm32f0xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h;
+
+[PreviousUsedCubeIDEFiles]
+SourceFiles=Core\Src\main.c;Core\Src\gpio.c;Core\Src\spi.c;Core\Src\tim.c;Core\Src\usart.c;Core\Src\stm32f0xx_it.c;Core\Src\stm32f0xx_hal_msp.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_spi.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_spi_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_gpio.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_dma.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_cortex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_exti.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart_ex.c;Drivers\CMSIS\Device\ST\STM32F0xx\Source\Templates\system_stm32f0xx.c;Core\Src\system_stm32f0xx.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_spi.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_spi_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_gpio.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_dma.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_cortex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_exti.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart_ex.c;Drivers\CMSIS\Device\ST\STM32F0xx\Source\Templates\system_stm32f0xx.c;Core\Src\system_stm32f0xx.c;;;
+HeaderPath=Drivers\STM32F0xx_HAL_Driver\Inc;Drivers\STM32F0xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32F0xx\Include;Drivers\CMSIS\Include;Core\Inc;
+CDefines=USE_HAL_DRIVER;STM32F072xB;USE_HAL_DRIVER;USE_HAL_DRIVER;
+
 [PreviousGenFiles]
 AdvancedFolderStructure=true
-HeaderFileListSize=5
+HeaderFileListSize=7
 HeaderFiles#0=..\Core\Inc\gpio.h
-HeaderFiles#1=..\Core\Inc\usart.h
-HeaderFiles#2=..\Core\Inc\stm32f0xx_it.h
-HeaderFiles#3=..\Core\Inc\stm32f0xx_hal_conf.h
-HeaderFiles#4=..\Core\Inc\main.h
+HeaderFiles#1=..\Core\Inc\spi.h
+HeaderFiles#2=..\Core\Inc\tim.h
+HeaderFiles#3=..\Core\Inc\usart.h
+HeaderFiles#4=..\Core\Inc\stm32f0xx_it.h
+HeaderFiles#5=..\Core\Inc\stm32f0xx_hal_conf.h
+HeaderFiles#6=..\Core\Inc\main.h
 HeaderFolderListSize=1
 HeaderPath#0=..\Core\Inc
 HeaderFiles=;
-SourceFileListSize=5
+SourceFileListSize=7
 SourceFiles#0=..\Core\Src\gpio.c
-SourceFiles#1=..\Core\Src\usart.c
-SourceFiles#2=..\Core\Src\stm32f0xx_it.c
-SourceFiles#3=..\Core\Src\stm32f0xx_hal_msp.c
-SourceFiles#4=..\Core\Src\main.c
+SourceFiles#1=..\Core\Src\spi.c
+SourceFiles#2=..\Core\Src\tim.c
+SourceFiles#3=..\Core\Src\usart.c
+SourceFiles#4=..\Core\Src\stm32f0xx_it.c
+SourceFiles#5=..\Core\Src\stm32f0xx_hal_msp.c
+SourceFiles#6=..\Core\Src\main.c
 SourceFolderListSize=1
 SourcePath#0=..\Core\Src
 SourceFiles=;
 
-[PreviousLibFiles]
-LibFiles=Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_def.h;Drivers\STM32F0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_cortex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_exti.h;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_gpio.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_dma.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_cortex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_exti.c;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_tim_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_uart_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_rcc_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_def.h;Drivers\STM32F0xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_i2c_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_gpio_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_dma.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_cortex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_pwr_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_flash_ex.h;Drivers\STM32F0xx_HAL_Driver\Inc\stm32f0xx_hal_exti.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\stm32f072xb.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\stm32f0xx.h;Drivers\CMSIS\Device\ST\STM32F0xx\Include\system_stm32f0xx.h;Drivers\CMSIS\Device\ST\STM32F0xx\Source\Templates\system_stm32f0xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h;
-
-[PreviousUsedCubeIDEFiles]
-SourceFiles=Core\Src\main.c;Core\Src\gpio.c;Core\Src\usart.c;Core\Src\stm32f0xx_it.c;Core\Src\stm32f0xx_hal_msp.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_gpio.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_dma.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_cortex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_exti.c;Drivers\CMSIS\Device\ST\STM32F0xx\Source\Templates\system_stm32f0xx.c;Core\Src\system_stm32f0xx.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_tim_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_uart_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_rcc_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_i2c_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_gpio.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_dma.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_cortex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_pwr_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_flash_ex.c;Drivers\STM32F0xx_HAL_Driver\Src\stm32f0xx_hal_exti.c;Drivers\CMSIS\Device\ST\STM32F0xx\Source\Templates\system_stm32f0xx.c;Core\Src\system_stm32f0xx.c;;;
-HeaderPath=Drivers\STM32F0xx_HAL_Driver\Inc;Drivers\STM32F0xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32F0xx\Include;Drivers\CMSIS\Include;Core\Inc;
-CDefines=USE_HAL_DRIVER;STM32F072xB;USE_HAL_DRIVER;USE_HAL_DRIVER;
-
diff --git a/nucleof072rb/Core/Inc/gpio.h b/nucleof072rb/Core/Inc/gpio.h
index 3149c8fc..c3802bf4 100644
--- a/nucleof072rb/Core/Inc/gpio.h
+++ b/nucleof072rb/Core/Inc/gpio.h
@@ -6,7 +6,7 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2024 STMicroelectronics.
+  * <h2><center>&copy; Copyright (c) 2026 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
   * This software component is licensed by ST under BSD 3-Clause license,
diff --git a/nucleof072rb/Core/Inc/spi.h b/nucleof072rb/Core/Inc/spi.h
new file mode 100644
index 00000000..9bd6372d
--- /dev/null
+++ b/nucleof072rb/Core/Inc/spi.h
@@ -0,0 +1,52 @@
+/**
+  ******************************************************************************
+  * @file    spi.h
+  * @brief   This file contains all the function prototypes for
+  *          the spi.c file
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2026 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __SPI_H__
+#define __SPI_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern SPI_HandleTypeDef hspi1;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_SPI1_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __SPI_H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/nucleof072rb/Core/Inc/stm32f0xx_hal_conf.h b/nucleof072rb/Core/Inc/stm32f0xx_hal_conf.h
index 9ad3d4f0..d2de0868 100644
--- a/nucleof072rb/Core/Inc/stm32f0xx_hal_conf.h
+++ b/nucleof072rb/Core/Inc/stm32f0xx_hal_conf.h
@@ -47,8 +47,8 @@
 /*#define HAL_LPTIM_MODULE_ENABLED   */
 /*#define HAL_RNG_MODULE_ENABLED   */
 /*#define HAL_RTC_MODULE_ENABLED   */
-/*#define HAL_SPI_MODULE_ENABLED   */
-/*#define HAL_TIM_MODULE_ENABLED   */
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
 #define HAL_UART_MODULE_ENABLED
 /*#define HAL_USART_MODULE_ENABLED   */
 /*#define HAL_IRDA_MODULE_ENABLED   */
diff --git a/nucleof072rb/Core/Inc/tim.h b/nucleof072rb/Core/Inc/tim.h
new file mode 100644
index 00000000..89721de5
--- /dev/null
+++ b/nucleof072rb/Core/Inc/tim.h
@@ -0,0 +1,54 @@
+/**
+  ******************************************************************************
+  * @file    tim.h
+  * @brief   This file contains all the function prototypes for
+  *          the tim.c file
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2026 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __TIM_H__
+#define __TIM_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern TIM_HandleTypeDef htim1;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_TIM1_Init(void);
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/nucleof072rb/Core/Inc/usart.h b/nucleof072rb/Core/Inc/usart.h
index c6298e1e..7a3ce457 100644
--- a/nucleof072rb/Core/Inc/usart.h
+++ b/nucleof072rb/Core/Inc/usart.h
@@ -6,7 +6,7 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2024 STMicroelectronics.
+  * <h2><center>&copy; Copyright (c) 2026 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
   * This software component is licensed by ST under BSD 3-Clause license,
diff --git a/nucleof072rb/Core/Src/gpio.c b/nucleof072rb/Core/Src/gpio.c
index c0ed0dff..f8dd992d 100644
--- a/nucleof072rb/Core/Src/gpio.c
+++ b/nucleof072rb/Core/Src/gpio.c
@@ -6,7 +6,7 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2024 STMicroelectronics.
+  * <h2><center>&copy; Copyright (c) 2026 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
   * This software component is licensed by ST under BSD 3-Clause license,
@@ -47,10 +47,14 @@ void MX_GPIO_Init(void)
   __HAL_RCC_GPIOC_CLK_ENABLE();
   __HAL_RCC_GPIOF_CLK_ENABLE();
   __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
 
   /*Configure GPIO pin Output Level */
   HAL_GPIO_WritePin(LD2_GPIO_Port, LD2_Pin, GPIO_PIN_RESET);
 
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOB, GPIO_PIN_8, GPIO_PIN_RESET);
+
   /*Configure GPIO pin : PtPin */
   GPIO_InitStruct.Pin = B1_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
@@ -64,6 +68,13 @@ void MX_GPIO_Init(void)
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
   HAL_GPIO_Init(LD2_GPIO_Port, &GPIO_InitStruct);
 
+  /*Configure GPIO pin : PB8 */
+  GPIO_InitStruct.Pin = GPIO_PIN_8;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
 }
 
 /* USER CODE BEGIN 2 */
diff --git a/nucleof072rb/Core/Src/main.c b/nucleof072rb/Core/Src/main.c
index c03642f9..4fddf139 100644
--- a/nucleof072rb/Core/Src/main.c
+++ b/nucleof072rb/Core/Src/main.c
@@ -19,6 +19,8 @@
 /* USER CODE END Header */
 /* Includes ------------------------------------------------------------------*/
 #include "main.h"
+#include "spi.h"
+#include "tim.h"
 #include "usart.h"
 #include "gpio.h"
 
@@ -34,6 +36,10 @@
 
 /* Private define ------------------------------------------------------------*/
 /* USER CODE BEGIN PD */
+#define ADC_MIN 0
+#define ADC_MAX 1023 //from documentation
+#define PWM_MIN 1000  // 1ms in microseconds
+#define PWM_MAX 2000  // 2ms in microseconds
 /* USER CODE END PD */
 
 /* Private macro -------------------------------------------------------------*/
@@ -55,6 +61,10 @@ void SystemClock_Config(void);
 
 /* Private user code ---------------------------------------------------------*/
 /* USER CODE BEGIN 0 */
+int readADC();
+float getPulseWidth(uint16_t adc_value);
+float getTimerCounts(float pulse_width);
+void updateTimer(float timer_counts);
 
 /* USER CODE END 0 */
 
@@ -87,14 +97,21 @@ int main(void)
   /* Initialize all configured peripherals */
   MX_GPIO_Init();
   MX_USART2_UART_Init();
+  MX_SPI1_Init();
+  MX_TIM1_Init();
   /* USER CODE BEGIN 2 */
-
+  HAL_TIM_PWM_Start(&htim1, TIM_CHANNEL_1);
   /* USER CODE END 2 */
 
   /* Infinite loop */
   /* USER CODE BEGIN WHILE */
   while (1)
   {
+	  int adc_value = readADC();
+	  float pulse_width = getPulseWidth(adc_value);
+	  float timer_counts = getTimerCounts(pulse_width);
+	  updateTimer(timer_counts);
+	  HAL_Delay(10);
     /* USER CODE END WHILE */
 
     /* USER CODE BEGIN 3 */
@@ -143,6 +160,52 @@ void SystemClock_Config(void)
 }
 
 /* USER CODE BEGIN 4 */
+int readADC() {
+	uint8_t start_byte = 0b00000001;
+	uint8_t command_byte = 0b10000000;
+	uint8_t tx[3] = {start_byte, command_byte, 0x00};
+	uint8_t rx[3] = {0, 0, 0};
+	uint16_t adc_value = 0;
+	/* pull cs low */
+	HAL_GPIO_WritePin(GPIOB, GPIO_PIN_8, GPIO_PIN_RESET);
+	/* sends back null bit, 10 useful in LSB, 10 useful in MSB */
+	HAL_SPI_TransmitReceive(&hspi1, tx, rx, 3, HAL_MAX_DELAY);
+	/* pull cs high */
+	HAL_GPIO_WritePin(GPIOB, GPIO_PIN_8, GPIO_PIN_SET);
+	/* clean up and combine rx[1] and rx[2] */
+	rx[1] = rx[1] >> 5;
+	adc_value = ((uint16_t)(rx[1] & 0b00000011)) << 8;
+	adc_value = adc_value | rx[2];
+	/* int should be 32 bits so returning a uint16_t should be fine */
+	return adc_value;
+}
+
+float getPulseWidth(uint16_t adc_value) {
+	/* linear mapping */
+	float pulse_width = 1.0 + ((float)adc_value / 1023.0) * 1.0;
+	return pulse_width;
+}
+
+float getTimerCounts(float pulse_width) {
+	/* prescalar is 15 and counter period is 65000 */
+	uint32_t period = __HAL_TIM_GET_AUTORELOAD(&htim1);
+	float timer_counts = pulse_width * period * 0.05;
+	return timer_counts;
+}
+
+void updateTimer(float timer_counts) {
+	/* bounds checking */
+	const float max_counts = 2000.0;
+	const float min_counts = 0.0;
+	if (timer_counts > max_counts) {
+		timer_counts = max_counts;
+	}
+	if (timer_counts < min_counts){
+		timer_counts = min_counts;
+	}
+	/* set high untill timer_counts reached, then low */
+	__HAL_TIM_SET_COMPARE(&htim1, TIM_CHANNEL_1, (uint32_t)timer_counts);
+}
 
 /* USER CODE END 4 */
 
diff --git a/nucleof072rb/Core/Src/spi.c b/nucleof072rb/Core/Src/spi.c
new file mode 100644
index 00000000..45b8027c
--- /dev/null
+++ b/nucleof072rb/Core/Src/spi.c
@@ -0,0 +1,133 @@
+/**
+  ******************************************************************************
+  * @file    spi.c
+  * @brief   This file provides code for the configuration
+  *          of the SPI instances.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2026 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "spi.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+SPI_HandleTypeDef hspi1;
+
+/* SPI1 init function */
+void MX_SPI1_Init(void)
+{
+
+  /* USER CODE BEGIN SPI1_Init 0 */
+
+  /* USER CODE END SPI1_Init 0 */
+
+  /* USER CODE BEGIN SPI1_Init 1 */
+
+  /* USER CODE END SPI1_Init 1 */
+  hspi1.Instance = SPI1;
+  hspi1.Init.Mode = SPI_MODE_MASTER;
+  hspi1.Init.Direction = SPI_DIRECTION_2LINES;
+  hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
+  hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
+  hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
+  hspi1.Init.NSS = SPI_NSS_SOFT;
+  hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
+  hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
+  hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
+  hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+  hspi1.Init.CRCPolynomial = 7;
+  hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
+  hspi1.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
+  if (HAL_SPI_Init(&hspi1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN SPI1_Init 2 */
+
+  /* USER CODE END SPI1_Init 2 */
+
+}
+
+void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(spiHandle->Instance==SPI1)
+  {
+  /* USER CODE BEGIN SPI1_MspInit 0 */
+
+  /* USER CODE END SPI1_MspInit 0 */
+    /* SPI1 clock enable */
+    __HAL_RCC_SPI1_CLK_ENABLE();
+
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**SPI1 GPIO Configuration
+    PA6     ------> SPI1_MISO
+    PA7     ------> SPI1_MOSI
+    PB3     ------> SPI1_SCK
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF0_SPI1;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_3;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF0_SPI1;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN SPI1_MspInit 1 */
+
+  /* USER CODE END SPI1_MspInit 1 */
+  }
+}
+
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
+{
+
+  if(spiHandle->Instance==SPI1)
+  {
+  /* USER CODE BEGIN SPI1_MspDeInit 0 */
+
+  /* USER CODE END SPI1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_SPI1_CLK_DISABLE();
+
+    /**SPI1 GPIO Configuration
+    PA6     ------> SPI1_MISO
+    PA7     ------> SPI1_MOSI
+    PB3     ------> SPI1_SCK
+    */
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_6|GPIO_PIN_7);
+
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3);
+
+  /* USER CODE BEGIN SPI1_MspDeInit 1 */
+
+  /* USER CODE END SPI1_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/nucleof072rb/Core/Src/tim.c b/nucleof072rb/Core/Src/tim.c
new file mode 100644
index 00000000..dfac0462
--- /dev/null
+++ b/nucleof072rb/Core/Src/tim.c
@@ -0,0 +1,163 @@
+/**
+  ******************************************************************************
+  * @file    tim.c
+  * @brief   This file provides code for the configuration
+  *          of the TIM instances.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2026 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "tim.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+TIM_HandleTypeDef htim1;
+
+/* TIM1 init function */
+void MX_TIM1_Init(void)
+{
+
+  /* USER CODE BEGIN TIM1_Init 0 */
+
+  /* USER CODE END TIM1_Init 0 */
+
+  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+  TIM_OC_InitTypeDef sConfigOC = {0};
+  TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
+
+  /* USER CODE BEGIN TIM1_Init 1 */
+
+  /* USER CODE END TIM1_Init 1 */
+  htim1.Instance = TIM1;
+  htim1.Init.Prescaler = 15;
+  htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim1.Init.Period = 64000;
+  htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim1.Init.RepetitionCounter = 0;
+  htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+  if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_Init(&htim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 0;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
+  sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+  if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
+  sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
+  sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
+  sBreakDeadTimeConfig.DeadTime = 0;
+  sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
+  sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
+  sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
+  if (HAL_TIMEx_ConfigBreakDeadTime(&htim1, &sBreakDeadTimeConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM1_Init 2 */
+
+  /* USER CODE END TIM1_Init 2 */
+  HAL_TIM_MspPostInit(&htim1);
+
+}
+
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
+{
+
+  if(tim_baseHandle->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspInit 0 */
+
+  /* USER CODE END TIM1_MspInit 0 */
+    /* TIM1 clock enable */
+    __HAL_RCC_TIM1_CLK_ENABLE();
+  /* USER CODE BEGIN TIM1_MspInit 1 */
+
+  /* USER CODE END TIM1_MspInit 1 */
+  }
+}
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(timHandle->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspPostInit 0 */
+
+  /* USER CODE END TIM1_MspPostInit 0 */
+
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    /**TIM1 GPIO Configuration
+    PA8     ------> TIM1_CH1
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_8;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF2_TIM1;
+    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN TIM1_MspPostInit 1 */
+
+  /* USER CODE END TIM1_MspPostInit 1 */
+  }
+
+}
+
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
+{
+
+  if(tim_baseHandle->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspDeInit 0 */
+
+  /* USER CODE END TIM1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM1_CLK_DISABLE();
+  /* USER CODE BEGIN TIM1_MspDeInit 1 */
+
+  /* USER CODE END TIM1_MspDeInit 1 */
+  }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/nucleof072rb/Core/Src/usart.c b/nucleof072rb/Core/Src/usart.c
index 5bfe8a4e..2fd4f059 100644
--- a/nucleof072rb/Core/Src/usart.c
+++ b/nucleof072rb/Core/Src/usart.c
@@ -6,7 +6,7 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2024 STMicroelectronics.
+  * <h2><center>&copy; Copyright (c) 2026 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
   * This software component is licensed by ST under BSD 3-Clause license,
diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h
new file mode 100644
index 00000000..8f494b83
--- /dev/null
+++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h
@@ -0,0 +1,852 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_spi.h
+  * @author  MCD Application Team
+  * @brief   Header file of SPI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_SPI_H
+#define STM32F0xx_HAL_SPI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SPI
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+  * @{
+  */
+
+/**
+  * @brief  SPI Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Mode;                /*!< Specifies the SPI operating mode.
+                                     This parameter can be a value of @ref SPI_Mode */
+
+  uint32_t Direction;           /*!< Specifies the SPI bidirectional mode state.
+                                     This parameter can be a value of @ref SPI_Direction */
+
+  uint32_t DataSize;            /*!< Specifies the SPI data size.
+                                     This parameter can be a value of @ref SPI_Data_Size */
+
+  uint32_t CLKPolarity;         /*!< Specifies the serial clock steady state.
+                                     This parameter can be a value of @ref SPI_Clock_Polarity */
+
+  uint32_t CLKPhase;            /*!< Specifies the clock active edge for the bit capture.
+                                     This parameter can be a value of @ref SPI_Clock_Phase */
+
+  uint32_t NSS;                 /*!< Specifies whether the NSS signal is managed by
+                                     hardware (NSS pin) or by software using the SSI bit.
+                                     This parameter can be a value of @ref SPI_Slave_Select_management */
+
+  uint32_t BaudRatePrescaler;   /*!< Specifies the Baud Rate prescaler value which will be
+                                     used to configure the transmit and receive SCK clock.
+                                     This parameter can be a value of @ref SPI_BaudRate_Prescaler
+                                     @note The communication clock is derived from the master
+                                     clock. The slave clock does not need to be set. */
+
+  uint32_t FirstBit;            /*!< Specifies whether data transfers start from MSB or LSB bit.
+                                     This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+  uint32_t TIMode;              /*!< Specifies if the TI mode is enabled or not.
+                                     This parameter can be a value of @ref SPI_TI_mode */
+
+  uint32_t CRCCalculation;      /*!< Specifies if the CRC calculation is enabled or not.
+                                     This parameter can be a value of @ref SPI_CRC_Calculation */
+
+  uint32_t CRCPolynomial;       /*!< Specifies the polynomial used for the CRC calculation.
+                                     This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */
+
+  uint32_t CRCLength;           /*!< Specifies the CRC Length used for the CRC calculation.
+                                     CRC Length is only used with Data8 and Data16, not other data size
+                                     This parameter can be a value of @ref SPI_CRC_length */
+
+  uint32_t NSSPMode;            /*!< Specifies whether the NSSP signal is enabled or not .
+                                     This parameter can be a value of @ref SPI_NSSP_Mode
+                                     This mode is activated by the NSSP bit in the SPIx_CR2 register and
+                                     it takes effect only if the SPI interface is configured as Motorola SPI
+                                     master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
+                                     CPOL setting is ignored).. */
+} SPI_InitTypeDef;
+
+/**
+  * @brief  HAL SPI State structure definition
+  */
+typedef enum
+{
+  HAL_SPI_STATE_RESET      = 0x00U,    /*!< Peripheral not Initialized                         */
+  HAL_SPI_STATE_READY      = 0x01U,    /*!< Peripheral Initialized and ready for use           */
+  HAL_SPI_STATE_BUSY       = 0x02U,    /*!< an internal process is ongoing                     */
+  HAL_SPI_STATE_BUSY_TX    = 0x03U,    /*!< Data Transmission process is ongoing               */
+  HAL_SPI_STATE_BUSY_RX    = 0x04U,    /*!< Data Reception process is ongoing                  */
+  HAL_SPI_STATE_BUSY_TX_RX = 0x05U,    /*!< Data Transmission and Reception process is ongoing */
+  HAL_SPI_STATE_ERROR      = 0x06U,    /*!< SPI error state                                    */
+  HAL_SPI_STATE_ABORT      = 0x07U     /*!< SPI abort is ongoing                               */
+} HAL_SPI_StateTypeDef;
+
+/**
+  * @brief  SPI handle Structure definition
+  */
+typedef struct __SPI_HandleTypeDef
+{
+  SPI_TypeDef                *Instance;      /*!< SPI registers base address               */
+
+  SPI_InitTypeDef            Init;           /*!< SPI communication parameters             */
+
+  uint8_t                    *pTxBuffPtr;    /*!< Pointer to SPI Tx transfer Buffer        */
+
+  uint16_t                   TxXferSize;     /*!< SPI Tx Transfer size                     */
+
+  __IO uint16_t              TxXferCount;    /*!< SPI Tx Transfer Counter                  */
+
+  uint8_t                    *pRxBuffPtr;    /*!< Pointer to SPI Rx transfer Buffer        */
+
+  uint16_t                   RxXferSize;     /*!< SPI Rx Transfer size                     */
+
+  __IO uint16_t              RxXferCount;    /*!< SPI Rx Transfer Counter                  */
+
+  uint32_t                   CRCSize;        /*!< SPI CRC size used for the transfer       */
+
+  void (*RxISR)(struct __SPI_HandleTypeDef *hspi);   /*!< function pointer on Rx ISR       */
+
+  void (*TxISR)(struct __SPI_HandleTypeDef *hspi);   /*!< function pointer on Tx ISR       */
+
+  DMA_HandleTypeDef          *hdmatx;        /*!< SPI Tx DMA Handle parameters             */
+
+  DMA_HandleTypeDef          *hdmarx;        /*!< SPI Rx DMA Handle parameters             */
+
+  HAL_LockTypeDef            Lock;           /*!< Locking object                           */
+
+  __IO HAL_SPI_StateTypeDef  State;          /*!< SPI communication state                  */
+
+  __IO uint32_t              ErrorCode;      /*!< SPI Error code                           */
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi);             /*!< SPI Tx Completed callback          */
+  void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi);             /*!< SPI Rx Completed callback          */
+  void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi);           /*!< SPI TxRx Completed callback        */
+  void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi);         /*!< SPI Tx Half Completed callback     */
+  void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi);         /*!< SPI Rx Half Completed callback     */
+  void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi);       /*!< SPI TxRx Half Completed callback   */
+  void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi);              /*!< SPI Error callback                 */
+  void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi);          /*!< SPI Abort callback                 */
+  void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi);            /*!< SPI Msp Init callback              */
+  void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi);          /*!< SPI Msp DeInit callback            */
+
+#endif  /* USE_HAL_SPI_REGISTER_CALLBACKS */
+} SPI_HandleTypeDef;
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+/**
+  * @brief  HAL SPI Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_SPI_TX_COMPLETE_CB_ID             = 0x00U,    /*!< SPI Tx Completed callback ID         */
+  HAL_SPI_RX_COMPLETE_CB_ID             = 0x01U,    /*!< SPI Rx Completed callback ID         */
+  HAL_SPI_TX_RX_COMPLETE_CB_ID          = 0x02U,    /*!< SPI TxRx Completed callback ID       */
+  HAL_SPI_TX_HALF_COMPLETE_CB_ID        = 0x03U,    /*!< SPI Tx Half Completed callback ID    */
+  HAL_SPI_RX_HALF_COMPLETE_CB_ID        = 0x04U,    /*!< SPI Rx Half Completed callback ID    */
+  HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID     = 0x05U,    /*!< SPI TxRx Half Completed callback ID  */
+  HAL_SPI_ERROR_CB_ID                   = 0x06U,    /*!< SPI Error callback ID                */
+  HAL_SPI_ABORT_CB_ID                   = 0x07U,    /*!< SPI Abort callback ID                */
+  HAL_SPI_MSPINIT_CB_ID                 = 0x08U,    /*!< SPI Msp Init callback ID             */
+  HAL_SPI_MSPDEINIT_CB_ID               = 0x09U     /*!< SPI Msp DeInit callback ID           */
+
+} HAL_SPI_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL SPI Callback pointer definition
+  */
+typedef  void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */
+
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
+  * @{
+  */
+
+/** @defgroup SPI_Error_Code SPI Error Code
+  * @{
+  */
+#define HAL_SPI_ERROR_NONE              (0x00000000U)   /*!< No error                               */
+#define HAL_SPI_ERROR_MODF              (0x00000001U)   /*!< MODF error                             */
+#define HAL_SPI_ERROR_CRC               (0x00000002U)   /*!< CRC error                              */
+#define HAL_SPI_ERROR_OVR               (0x00000004U)   /*!< OVR error                              */
+#define HAL_SPI_ERROR_FRE               (0x00000008U)   /*!< FRE error                              */
+#define HAL_SPI_ERROR_DMA               (0x00000010U)   /*!< DMA transfer error                     */
+#define HAL_SPI_ERROR_FLAG              (0x00000020U)   /*!< Error on RXNE/TXE/BSY/FTLVL/FRLVL Flag */
+#define HAL_SPI_ERROR_ABORT             (0x00000040U)   /*!< Error during SPI Abort procedure       */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+#define HAL_SPI_ERROR_INVALID_CALLBACK  (0x00000080U)   /*!< Invalid Callback error                 */
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Mode SPI Mode
+  * @{
+  */
+#define SPI_MODE_SLAVE                  (0x00000000U)
+#define SPI_MODE_MASTER                 (SPI_CR1_MSTR | SPI_CR1_SSI)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Direction SPI Direction Mode
+  * @{
+  */
+#define SPI_DIRECTION_2LINES            (0x00000000U)
+#define SPI_DIRECTION_2LINES_RXONLY     SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE             SPI_CR1_BIDIMODE
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Data_Size SPI Data Size
+  * @{
+  */
+#define SPI_DATASIZE_4BIT               (0x00000300U)
+#define SPI_DATASIZE_5BIT               (0x00000400U)
+#define SPI_DATASIZE_6BIT               (0x00000500U)
+#define SPI_DATASIZE_7BIT               (0x00000600U)
+#define SPI_DATASIZE_8BIT               (0x00000700U)
+#define SPI_DATASIZE_9BIT               (0x00000800U)
+#define SPI_DATASIZE_10BIT              (0x00000900U)
+#define SPI_DATASIZE_11BIT              (0x00000A00U)
+#define SPI_DATASIZE_12BIT              (0x00000B00U)
+#define SPI_DATASIZE_13BIT              (0x00000C00U)
+#define SPI_DATASIZE_14BIT              (0x00000D00U)
+#define SPI_DATASIZE_15BIT              (0x00000E00U)
+#define SPI_DATASIZE_16BIT              (0x00000F00U)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+  * @{
+  */
+#define SPI_POLARITY_LOW                (0x00000000U)
+#define SPI_POLARITY_HIGH               SPI_CR1_CPOL
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
+  * @{
+  */
+#define SPI_PHASE_1EDGE                 (0x00000000U)
+#define SPI_PHASE_2EDGE                 SPI_CR1_CPHA
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Slave_Select_management SPI Slave Select Management
+  * @{
+  */
+#define SPI_NSS_SOFT                    SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT              (0x00000000U)
+#define SPI_NSS_HARD_OUTPUT             (SPI_CR2_SSOE << 16U)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode
+  * @{
+  */
+#define SPI_NSS_PULSE_ENABLE            SPI_CR2_NSSP
+#define SPI_NSS_PULSE_DISABLE           (0x00000000U)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
+  * @{
+  */
+#define SPI_BAUDRATEPRESCALER_2         (0x00000000U)
+#define SPI_BAUDRATEPRESCALER_4         (SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_8         (SPI_CR1_BR_1)
+#define SPI_BAUDRATEPRESCALER_16        (SPI_CR1_BR_1 | SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_32        (SPI_CR1_BR_2)
+#define SPI_BAUDRATEPRESCALER_64        (SPI_CR1_BR_2 | SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_128       (SPI_CR1_BR_2 | SPI_CR1_BR_1)
+#define SPI_BAUDRATEPRESCALER_256       (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission
+  * @{
+  */
+#define SPI_FIRSTBIT_MSB                (0x00000000U)
+#define SPI_FIRSTBIT_LSB                SPI_CR1_LSBFIRST
+/**
+  * @}
+  */
+
+/** @defgroup SPI_TI_mode SPI TI Mode
+  * @{
+  */
+#define SPI_TIMODE_DISABLE              (0x00000000U)
+#define SPI_TIMODE_ENABLE               SPI_CR2_FRF
+/**
+  * @}
+  */
+
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
+  * @{
+  */
+#define SPI_CRCCALCULATION_DISABLE      (0x00000000U)
+#define SPI_CRCCALCULATION_ENABLE       SPI_CR1_CRCEN
+/**
+  * @}
+  */
+
+/** @defgroup SPI_CRC_length SPI CRC Length
+  * @{
+  * This parameter can be one of the following values:
+  *     SPI_CRC_LENGTH_DATASIZE: aligned with the data size
+  *     SPI_CRC_LENGTH_8BIT    : CRC 8bit
+  *     SPI_CRC_LENGTH_16BIT   : CRC 16bit
+  */
+#define SPI_CRC_LENGTH_DATASIZE         (0x00000000U)
+#define SPI_CRC_LENGTH_8BIT             (0x00000001U)
+#define SPI_CRC_LENGTH_16BIT            (0x00000002U)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_FIFO_reception_threshold SPI FIFO Reception Threshold
+  * @{
+  * This parameter can be one of the following values:
+  *     SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF :
+  *          RXNE event is generated if the FIFO
+  *          level is greater or equal to 1/4(8-bits).
+  *     SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO
+  *          level is greater or equal to 1/2(16 bits). */
+#define SPI_RXFIFO_THRESHOLD            SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_QF         SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_HF         (0x00000000U)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition
+  * @{
+  */
+#define SPI_IT_TXE                      SPI_CR2_TXEIE
+#define SPI_IT_RXNE                     SPI_CR2_RXNEIE
+#define SPI_IT_ERR                      SPI_CR2_ERRIE
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Flags_definition SPI Flags Definition
+  * @{
+  */
+#define SPI_FLAG_RXNE                   SPI_SR_RXNE   /* SPI status flag: Rx buffer not empty flag       */
+#define SPI_FLAG_TXE                    SPI_SR_TXE    /* SPI status flag: Tx buffer empty flag           */
+#define SPI_FLAG_BSY                    SPI_SR_BSY    /* SPI status flag: Busy flag                      */
+#define SPI_FLAG_CRCERR                 SPI_SR_CRCERR /* SPI Error flag: CRC error flag                  */
+#define SPI_FLAG_MODF                   SPI_SR_MODF   /* SPI Error flag: Mode fault flag                 */
+#define SPI_FLAG_OVR                    SPI_SR_OVR    /* SPI Error flag: Overrun flag                    */
+#define SPI_FLAG_FRE                    SPI_SR_FRE    /* SPI Error flag: TI mode frame format error flag */
+#define SPI_FLAG_FTLVL                  SPI_SR_FTLVL  /* SPI fifo transmission level                     */
+#define SPI_FLAG_FRLVL                  SPI_SR_FRLVL  /* SPI fifo reception level                        */
+#define SPI_FLAG_MASK                   (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\
+                                         | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_transmission_fifo_status_level SPI Transmission FIFO Status Level
+  * @{
+  */
+#define SPI_FTLVL_EMPTY                 (0x00000000U)
+#define SPI_FTLVL_QUARTER_FULL          (0x00000800U)
+#define SPI_FTLVL_HALF_FULL             (0x00001000U)
+#define SPI_FTLVL_FULL                  (0x00001800U)
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level
+  * @{
+  */
+#define SPI_FRLVL_EMPTY                 (0x00000000U)
+#define SPI_FRLVL_QUARTER_FULL          (0x00000200U)
+#define SPI_FRLVL_HALF_FULL             (0x00000400U)
+#define SPI_FRLVL_FULL                  (0x00000600U)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+  * @{
+  */
+
+/** @brief  Reset SPI handle state.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__)                do{                                                  \
+                                                                    (__HANDLE__)->State = HAL_SPI_STATE_RESET;       \
+                                                                    (__HANDLE__)->MspInitCallback = NULL;            \
+                                                                    (__HANDLE__)->MspDeInitCallback = NULL;          \
+                                                                  } while(0)
+#else
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+
+/** @brief  Enable the specified SPI interrupts.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @param  __INTERRUPT__ specifies the interrupt source to enable.
+  *         This parameter can be one of the following values:
+  *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg SPI_IT_ERR: Error interrupt enable
+  * @retval None
+  */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__)   SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
+
+/** @brief  Disable the specified SPI interrupts.
+  * @param  __HANDLE__ specifies the SPI handle.
+  *         This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
+  * @param  __INTERRUPT__ specifies the interrupt source to disable.
+  *         This parameter can be one of the following values:
+  *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg SPI_IT_ERR: Error interrupt enable
+  * @retval None
+  */
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__)  CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
+
+/** @brief  Check whether the specified SPI interrupt source is enabled or not.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @param  __INTERRUPT__ specifies the SPI interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg SPI_IT_ERR: Error interrupt enable
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\
+                                                              & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Check whether the specified SPI flag is set or not.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+  *            @arg SPI_FLAG_TXE: Transmit buffer empty flag
+  *            @arg SPI_FLAG_CRCERR: CRC error flag
+  *            @arg SPI_FLAG_MODF: Mode fault flag
+  *            @arg SPI_FLAG_OVR: Overrun flag
+  *            @arg SPI_FLAG_BSY: Busy flag
+  *            @arg SPI_FLAG_FRE: Frame format error flag
+  *            @arg SPI_FLAG_FTLVL: SPI fifo transmission level
+  *            @arg SPI_FLAG_FRLVL: SPI fifo reception level
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the SPI CRCERR pending flag.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
+
+/** @brief  Clear the SPI MODF pending flag.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__)             \
+  do{                                                    \
+    __IO uint32_t tmpreg_modf = 0x00U;                   \
+    tmpreg_modf = (__HANDLE__)->Instance->SR;            \
+    CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \
+    UNUSED(tmpreg_modf);                                 \
+  } while(0U)
+
+/** @brief  Clear the SPI OVR pending flag.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__)        \
+  do{                                              \
+    __IO uint32_t tmpreg_ovr = 0x00U;              \
+    tmpreg_ovr = (__HANDLE__)->Instance->DR;       \
+    tmpreg_ovr = (__HANDLE__)->Instance->SR;       \
+    UNUSED(tmpreg_ovr);                            \
+  } while(0U)
+
+/** @brief  Clear the SPI FRE pending flag.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__)        \
+  do{                                              \
+    __IO uint32_t tmpreg_fre = 0x00U;              \
+    tmpreg_fre = (__HANDLE__)->Instance->SR;       \
+    UNUSED(tmpreg_fre);                            \
+  }while(0U)
+
+/** @brief  Enable the SPI peripheral.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_ENABLE(__HANDLE__)  SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
+
+/** @brief  Disable the SPI peripheral.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPI_Private_Macros SPI Private Macros
+  * @{
+  */
+
+/** @brief  Set the SPI transmit-only mode.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define SPI_1LINE_TX(__HANDLE__)  SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
+
+/** @brief  Set the SPI receive-only mode.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define SPI_1LINE_RX(__HANDLE__)  CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
+
+/** @brief  Reset the CRC calculation of the SPI.
+  * @param  __HANDLE__ specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\
+                                       SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U)
+
+/** @brief  Check whether the specified SPI flag is set or not.
+  * @param  __SR__  copy of SPI SR register.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+  *            @arg SPI_FLAG_TXE: Transmit buffer empty flag
+  *            @arg SPI_FLAG_CRCERR: CRC error flag
+  *            @arg SPI_FLAG_MODF: Mode fault flag
+  *            @arg SPI_FLAG_OVR: Overrun flag
+  *            @arg SPI_FLAG_BSY: Busy flag
+  *            @arg SPI_FLAG_FRE: Frame format error flag
+  *            @arg SPI_FLAG_FTLVL: SPI fifo transmission level
+  *            @arg SPI_FLAG_FRLVL: SPI fifo reception level
+  * @retval SET or RESET.
+  */
+#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == \
+                                          ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET)
+
+/** @brief  Check whether the specified SPI Interrupt is set or not.
+  * @param  __CR2__  copy of SPI CR2 register.
+  * @param  __INTERRUPT__ specifies the SPI interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg SPI_IT_ERR: Error interrupt enable
+  * @retval SET or RESET.
+  */
+#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == \
+                                                     (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks if SPI Mode parameter is in allowed range.
+  * @param  __MODE__ specifies the SPI Mode.
+  *         This parameter can be a value of @ref SPI_Mode
+  * @retval None
+  */
+#define IS_SPI_MODE(__MODE__)      (((__MODE__) == SPI_MODE_SLAVE)   || \
+                                    ((__MODE__) == SPI_MODE_MASTER))
+
+/** @brief  Checks if SPI Direction Mode parameter is in allowed range.
+  * @param  __MODE__ specifies the SPI Direction Mode.
+  *         This parameter can be a value of @ref SPI_Direction
+  * @retval None
+  */
+#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES)        || \
+                                    ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \
+                                    ((__MODE__) == SPI_DIRECTION_1LINE))
+
+/** @brief  Checks if SPI Direction Mode parameter is 2 lines.
+  * @param  __MODE__ specifies the SPI Direction Mode.
+  * @retval None
+  */
+#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES)
+
+/** @brief  Checks if SPI Direction Mode parameter is 1 or 2 lines.
+  * @param  __MODE__ specifies the SPI Direction Mode.
+  * @retval None
+  */
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
+                                                    ((__MODE__) == SPI_DIRECTION_1LINE))
+
+/** @brief  Checks if SPI Data Size parameter is in allowed range.
+  * @param  __DATASIZE__ specifies the SPI Data Size.
+  *         This parameter can be a value of @ref SPI_Data_Size
+  * @retval None
+  */
+#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_15BIT) || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_14BIT) || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_13BIT) || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_12BIT) || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_11BIT) || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_10BIT) || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_9BIT)  || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_8BIT)  || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_7BIT)  || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_6BIT)  || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_5BIT)  || \
+                                       ((__DATASIZE__) == SPI_DATASIZE_4BIT))
+
+/** @brief  Checks if SPI Serial clock steady state parameter is in allowed range.
+  * @param  __CPOL__ specifies the SPI serial clock steady state.
+  *         This parameter can be a value of @ref SPI_Clock_Polarity
+  * @retval None
+  */
+#define IS_SPI_CPOL(__CPOL__)      (((__CPOL__) == SPI_POLARITY_LOW) || \
+                                    ((__CPOL__) == SPI_POLARITY_HIGH))
+
+/** @brief  Checks if SPI Clock Phase parameter is in allowed range.
+  * @param  __CPHA__ specifies the SPI Clock Phase.
+  *         This parameter can be a value of @ref SPI_Clock_Phase
+  * @retval None
+  */
+#define IS_SPI_CPHA(__CPHA__)      (((__CPHA__) == SPI_PHASE_1EDGE) || \
+                                    ((__CPHA__) == SPI_PHASE_2EDGE))
+
+/** @brief  Checks if SPI Slave Select parameter is in allowed range.
+  * @param  __NSS__ specifies the SPI Slave Select management parameter.
+  *         This parameter can be a value of @ref SPI_Slave_Select_management
+  * @retval None
+  */
+#define IS_SPI_NSS(__NSS__)        (((__NSS__) == SPI_NSS_SOFT)       || \
+                                    ((__NSS__) == SPI_NSS_HARD_INPUT) || \
+                                    ((__NSS__) == SPI_NSS_HARD_OUTPUT))
+
+/** @brief  Checks if SPI NSS Pulse parameter is in allowed range.
+  * @param  __NSSP__ specifies the SPI NSS Pulse Mode parameter.
+  *         This parameter can be a value of @ref SPI_NSSP_Mode
+  * @retval None
+  */
+#define IS_SPI_NSSP(__NSSP__)      (((__NSSP__) == SPI_NSS_PULSE_ENABLE) || \
+                                    ((__NSSP__) == SPI_NSS_PULSE_DISABLE))
+
+/** @brief  Checks if SPI Baudrate prescaler parameter is in allowed range.
+  * @param  __PRESCALER__ specifies the SPI Baudrate prescaler.
+  *         This parameter can be a value of @ref SPI_BaudRate_Prescaler
+  * @retval None
+  */
+#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2)   || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4)   || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8)   || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16)  || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32)  || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64)  || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \
+                                                  ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256))
+
+/** @brief  Checks if SPI MSB LSB transmission parameter is in allowed range.
+  * @param  __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit).
+  *         This parameter can be a value of @ref SPI_MSB_LSB_transmission
+  * @retval None
+  */
+#define IS_SPI_FIRST_BIT(__BIT__)  (((__BIT__) == SPI_FIRSTBIT_MSB) || \
+                                    ((__BIT__) == SPI_FIRSTBIT_LSB))
+
+/** @brief  Checks if SPI TI mode parameter is in allowed range.
+  * @param  __MODE__ specifies the SPI TI mode.
+  *         This parameter can be a value of @ref SPI_TI_mode
+  * @retval None
+  */
+#define IS_SPI_TIMODE(__MODE__)    (((__MODE__) == SPI_TIMODE_DISABLE) || \
+                                    ((__MODE__) == SPI_TIMODE_ENABLE))
+
+/** @brief  Checks if SPI CRC calculation enabled state is in allowed range.
+  * @param  __CALCULATION__ specifies the SPI CRC calculation enable state.
+  *         This parameter can be a value of @ref SPI_CRC_Calculation
+  * @retval None
+  */
+#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \
+                                                 ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE))
+
+/** @brief  Checks if SPI CRC length is in allowed range.
+  * @param  __LENGTH__ specifies the SPI CRC length.
+  *         This parameter can be a value of @ref SPI_CRC_length
+  * @retval None
+  */
+#define IS_SPI_CRC_LENGTH(__LENGTH__) (((__LENGTH__) == SPI_CRC_LENGTH_DATASIZE) || \
+                                       ((__LENGTH__) == SPI_CRC_LENGTH_8BIT)     || \
+                                       ((__LENGTH__) == SPI_CRC_LENGTH_16BIT))
+
+/** @brief  Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range.
+  * @param  __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation.
+  *         This parameter must be a number between Min_Data = 0 and Max_Data = 65535
+  * @retval None
+  */
+#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U)    && \
+                                               ((__POLYNOMIAL__) <= 0xFFFFU) && \
+                                              (((__POLYNOMIAL__)&0x1U) != 0U))
+
+/** @brief  Checks if DMA handle is valid.
+  * @param  __HANDLE__ specifies a DMA Handle.
+  * @retval None
+  */
+#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL)
+
+/**
+  * @}
+  */
+
+/* Include SPI HAL Extended module */
+#include "stm32f0xx_hal_spi_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup SPI_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, pSPI_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup SPI_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions  ***************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size,
+                                          uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
+                                             uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
+                                              uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+/* Transfer Abort functions */
+HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi);
+/**
+  * @}
+  */
+
+/** @addtogroup SPI_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t             HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi_ex.h b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi_ex.h
new file mode 100644
index 00000000..b65c152a
--- /dev/null
+++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi_ex.h
@@ -0,0 +1,75 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_spi_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of SPI HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_SPI_EX_H
+#define STM32F0xx_HAL_SPI_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SPIEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPIEx_Exported_Functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions  ****************************/
+/* IO operation functions *****************************************************/
+/** @addtogroup SPIEx_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(SPI_HandleTypeDef *hspi);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_SPI_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_spi.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_spi.c
new file mode 100644
index 00000000..2ddf0426
--- /dev/null
+++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_spi.c
@@ -0,0 +1,4404 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_spi.c
+  * @author  MCD Application Team
+  * @brief   SPI HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Serial Peripheral Interface (SPI) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The SPI HAL driver can be used as follows:
+
+      (#) Declare a SPI_HandleTypeDef handle structure, for example:
+          SPI_HandleTypeDef  hspi;
+
+      (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API:
+          (##) Enable the SPIx interface clock
+          (##) SPI pins configuration
+              (+++) Enable the clock for the SPI GPIOs
+              (+++) Configure these SPI pins as alternate function push-pull
+          (##) NVIC configuration if you need to use interrupt process
+              (+++) Configure the SPIx interrupt priority
+              (+++) Enable the NVIC SPI IRQ handle
+          (##) DMA Configuration if you need to use DMA process
+              (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive Stream/Channel
+              (+++) Enable the DMAx clock
+              (+++) Configure the DMA handle parameters
+              (+++) Configure the DMA Tx or Rx Stream/Channel
+              (+++) Associate the initialized hdma_tx(or _rx)  handle to the hspi DMA Tx or Rx handle
+              (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream/Channel
+
+      (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS
+          management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure.
+
+      (#) Initialize the SPI registers by calling the HAL_SPI_Init() API:
+          (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+              by calling the customized HAL_SPI_MspInit() API.
+     [..]
+       Circular mode restriction:
+      (#) The DMA circular mode cannot be used when the SPI is configured in these modes:
+          (##) Master 2Lines RxOnly
+          (##) Master 1Line Rx
+      (#) The CRC feature is not managed when the DMA circular mode is enabled
+      (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs
+          the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks
+     [..]
+       Master Receive mode restriction:
+      (#) In Master unidirectional receive-only mode (MSTR =1, BIDIMODE=0, RXONLY=1) or
+          bidirectional receive mode (MSTR=1, BIDIMODE=1, BIDIOE=0), to ensure that the SPI
+          does not initiate a new transfer the following procedure has to be respected:
+          (##) HAL_SPI_DeInit()
+          (##) HAL_SPI_Init()
+     [..]
+       Callback registration:
+
+      (#) The compilation flag USE_HAL_SPI_REGISTER_CALLBACKS when set to 1U
+          allows the user to configure dynamically the driver callbacks.
+          Use Functions HAL_SPI_RegisterCallback() to register an interrupt callback.
+
+          Function HAL_SPI_RegisterCallback() allows to register following callbacks:
+            (++) TxCpltCallback        : SPI Tx Completed callback
+            (++) RxCpltCallback        : SPI Rx Completed callback
+            (++) TxRxCpltCallback      : SPI TxRx Completed callback
+            (++) TxHalfCpltCallback    : SPI Tx Half Completed callback
+            (++) RxHalfCpltCallback    : SPI Rx Half Completed callback
+            (++) TxRxHalfCpltCallback  : SPI TxRx Half Completed callback
+            (++) ErrorCallback         : SPI Error callback
+            (++) AbortCpltCallback     : SPI Abort callback
+            (++) MspInitCallback       : SPI Msp Init callback
+            (++) MspDeInitCallback     : SPI Msp DeInit callback
+          This function takes as parameters the HAL peripheral handle, the Callback ID
+          and a pointer to the user callback function.
+
+
+      (#) Use function HAL_SPI_UnRegisterCallback to reset a callback to the default
+          weak function.
+          HAL_SPI_UnRegisterCallback takes as parameters the HAL peripheral handle,
+          and the Callback ID.
+          This function allows to reset following callbacks:
+            (++) TxCpltCallback        : SPI Tx Completed callback
+            (++) RxCpltCallback        : SPI Rx Completed callback
+            (++) TxRxCpltCallback      : SPI TxRx Completed callback
+            (++) TxHalfCpltCallback    : SPI Tx Half Completed callback
+            (++) RxHalfCpltCallback    : SPI Rx Half Completed callback
+            (++) TxRxHalfCpltCallback  : SPI TxRx Half Completed callback
+            (++) ErrorCallback         : SPI Error callback
+            (++) AbortCpltCallback     : SPI Abort callback
+            (++) MspInitCallback       : SPI Msp Init callback
+            (++) MspDeInitCallback     : SPI Msp DeInit callback
+
+       [..]
+       By default, after the HAL_SPI_Init() and when the state is HAL_SPI_STATE_RESET
+       all callbacks are set to the corresponding weak functions:
+       examples HAL_SPI_MasterTxCpltCallback(), HAL_SPI_MasterRxCpltCallback().
+       Exception done for MspInit and MspDeInit functions that are
+       reset to the legacy weak functions in the HAL_SPI_Init()/ HAL_SPI_DeInit() only when
+       these callbacks are null (not registered beforehand).
+       If MspInit or MspDeInit are not null, the HAL_SPI_Init()/ HAL_SPI_DeInit()
+       keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state.
+
+       [..]
+       Callbacks can be registered/unregistered in HAL_SPI_STATE_READY state only.
+       Exception done MspInit/MspDeInit functions that can be registered/unregistered
+       in HAL_SPI_STATE_READY or HAL_SPI_STATE_RESET state,
+       thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
+       Then, the user first registers the MspInit/MspDeInit user callbacks
+       using HAL_SPI_RegisterCallback() before calling HAL_SPI_DeInit()
+       or HAL_SPI_Init() function.
+
+       [..]
+       When the compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or
+       not defined, the callback registering feature is not available
+       and weak (surcharged) callbacks are used.
+
+     [..]
+       Using the HAL it is not possible to reach all supported SPI frequency with the different SPI Modes,
+       the following table resume the max SPI frequency reached with data size 8bits/16bits,
+         according to frequency of the APBx Peripheral Clock (fPCLK) used by the SPI instance.
+
+  @endverbatim
+
+  Additional table :
+
+       DataSize = SPI_DATASIZE_8BIT:
+       +----------------------------------------------------------------------------------------------+
+       |         |                | 2Lines Fullduplex   |     2Lines RxOnly    |         1Line        |
+       | Process | Transfer mode  |---------------------|----------------------|----------------------|
+       |         |                |  Master  |  Slave   |  Master   |  Slave   |  Master   |  Slave   |
+       |==============================================================================================|
+       |    T    |     Polling    | Fpclk/4  | Fpclk/8  |    NA     |    NA    |    NA     |   NA     |
+       |    X    |----------------|----------|----------|-----------|----------|-----------|----------|
+       |    /    |     Interrupt  | Fpclk/4  | Fpclk/16 |    NA     |    NA    |    NA     |   NA     |
+       |    R    |----------------|----------|----------|-----------|----------|-----------|----------|
+       |    X    |       DMA      | Fpclk/2  | Fpclk/2  |    NA     |    NA    |    NA     |   NA     |
+       |=========|================|==========|==========|===========|==========|===========|==========|
+       |         |     Polling    | Fpclk/4  | Fpclk/8  | Fpclk/16  | Fpclk/8  | Fpclk/8   | Fpclk/8  |
+       |         |----------------|----------|----------|-----------|----------|-----------|----------|
+       |    R    |     Interrupt  | Fpclk/8  | Fpclk/16 | Fpclk/8   | Fpclk/8  | Fpclk/8   | Fpclk/4  |
+       |    X    |----------------|----------|----------|-----------|----------|-----------|----------|
+       |         |       DMA      | Fpclk/4  | Fpclk/2  | Fpclk/2   | Fpclk/16 | Fpclk/2   | Fpclk/16 |
+       |=========|================|==========|==========|===========|==========|===========|==========|
+       |         |     Polling    | Fpclk/8  | Fpclk/2  |     NA    |    NA    | Fpclk/8   | Fpclk/8  |
+       |         |----------------|----------|----------|-----------|----------|-----------|----------|
+       |    T    |     Interrupt  | Fpclk/2  | Fpclk/4  |     NA    |    NA    | Fpclk/16  | Fpclk/8  |
+       |    X    |----------------|----------|----------|-----------|----------|-----------|----------|
+       |         |       DMA      | Fpclk/2  | Fpclk/2  |     NA    |    NA    | Fpclk/8   | Fpclk/16 |
+       +----------------------------------------------------------------------------------------------+
+
+       DataSize = SPI_DATASIZE_16BIT:
+       +----------------------------------------------------------------------------------------------+
+       |         |                | 2Lines Fullduplex   |     2Lines RxOnly    |         1Line        |
+       | Process | Transfer mode  |---------------------|----------------------|----------------------|
+       |         |                |  Master  |  Slave   |  Master   |  Slave   |  Master   |  Slave   |
+       |==============================================================================================|
+       |    T    |     Polling    | Fpclk/4  | Fpclk/8  |    NA     |    NA    |    NA     |   NA     |
+       |    X    |----------------|----------|----------|-----------|----------|-----------|----------|
+       |    /    |     Interrupt  | Fpclk/4  | Fpclk/16 |    NA     |    NA    |    NA     |   NA     |
+       |    R    |----------------|----------|----------|-----------|----------|-----------|----------|
+       |    X    |       DMA      | Fpclk/2  | Fpclk/2  |    NA     |    NA    |    NA     |   NA     |
+       |=========|================|==========|==========|===========|==========|===========|==========|
+       |         |     Polling    | Fpclk/4  | Fpclk/8  | Fpclk/16  | Fpclk/8  | Fpclk/8   | Fpclk/8  |
+       |         |----------------|----------|----------|-----------|----------|-----------|----------|
+       |    R    |     Interrupt  | Fpclk/8  | Fpclk/16 | Fpclk/8   | Fpclk/8  | Fpclk/8   | Fpclk/4  |
+       |    X    |----------------|----------|----------|-----------|----------|-----------|----------|
+       |         |       DMA      | Fpclk/4  | Fpclk/2  | Fpclk/2   | Fpclk/16 | Fpclk/2   | Fpclk/16 |
+       |=========|================|==========|==========|===========|==========|===========|==========|
+       |         |     Polling    | Fpclk/8  | Fpclk/2  |     NA    |    NA    | Fpclk/8   | Fpclk/8  |
+       |         |----------------|----------|----------|-----------|----------|-----------|----------|
+       |    T    |     Interrupt  | Fpclk/2  | Fpclk/4  |     NA    |    NA    | Fpclk/16  | Fpclk/8  |
+       |    X    |----------------|----------|----------|-----------|----------|-----------|----------|
+       |         |       DMA      | Fpclk/2  | Fpclk/2  |     NA    |    NA    | Fpclk/8   | Fpclk/16 |
+       +----------------------------------------------------------------------------------------------+
+       @note The max SPI frequency depend on SPI data size (4bits, 5bits,..., 8bits,...15bits, 16bits),
+             SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA).
+       @note
+            (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and HAL_SPI_TransmitReceive_DMA()
+            (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA()
+            (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA()
+
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SPI SPI
+  * @brief SPI HAL module driver
+  * @{
+  */
+#ifdef HAL_SPI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup SPI_Private_Constants SPI Private Constants
+  * @{
+  */
+#define SPI_DEFAULT_TIMEOUT 100U
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup SPI_Private_Functions SPI Private Functions
+  * @{
+  */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAError(DMA_HandleTypeDef *hdma);
+static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma);
+static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State,
+                                                       uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State,
+                                                       uint32_t Timeout, uint32_t Tickstart);
+static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+#if (USE_SPI_CRC != 0U)
+static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi);
+#endif /* USE_SPI_CRC */
+static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi);
+static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Functions SPI Exported Functions
+  * @{
+  */
+
+/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and
+          de-initialize the SPIx peripheral:
+
+      (+) User must implement HAL_SPI_MspInit() function in which he configures
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+      (+) Call the function HAL_SPI_Init() to configure the selected device with
+          the selected configuration:
+        (++) Mode
+        (++) Direction
+        (++) Data Size
+        (++) Clock Polarity and Phase
+        (++) NSS Management
+        (++) BaudRate Prescaler
+        (++) FirstBit
+        (++) TIMode
+        (++) CRC Calculation
+        (++) CRC Polynomial if CRC enabled
+        (++) CRC Length, used only with Data8 and Data16
+        (++) FIFO reception threshold
+
+      (+) Call the function HAL_SPI_DeInit() to restore the default configuration
+          of the selected SPIx peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initialize the SPI according to the specified parameters
+  *         in the SPI_InitTypeDef and initialize the associated handle.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi)
+{
+  uint32_t frxth;
+
+  /* Check the SPI handle allocation */
+  if (hspi == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
+  assert_param(IS_SPI_MODE(hspi->Init.Mode));
+  assert_param(IS_SPI_DIRECTION(hspi->Init.Direction));
+  assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize));
+  assert_param(IS_SPI_NSS(hspi->Init.NSS));
+  assert_param(IS_SPI_NSSP(hspi->Init.NSSPMode));
+  assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
+  assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit));
+  assert_param(IS_SPI_TIMODE(hspi->Init.TIMode));
+  if (hspi->Init.TIMode == SPI_TIMODE_DISABLE)
+  {
+    assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity));
+    assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase));
+
+    if (hspi->Init.Mode == SPI_MODE_MASTER)
+    {
+      assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
+    }
+    else
+    {
+      /* Baudrate prescaler not use in Motoraola Slave mode. force to default value */
+      hspi->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
+    }
+  }
+  else
+  {
+    assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
+
+    /* Force polarity and phase to TI protocaol requirements */
+    hspi->Init.CLKPolarity = SPI_POLARITY_LOW;
+    hspi->Init.CLKPhase    = SPI_PHASE_1EDGE;
+  }
+#if (USE_SPI_CRC != 0U)
+  assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation));
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial));
+    assert_param(IS_SPI_CRC_LENGTH(hspi->Init.CRCLength));
+  }
+#else
+  hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+#endif /* USE_SPI_CRC */
+
+  if (hspi->State == HAL_SPI_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hspi->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+    /* Init the SPI Callback settings */
+    hspi->TxCpltCallback       = HAL_SPI_TxCpltCallback;       /* Legacy weak TxCpltCallback       */
+    hspi->RxCpltCallback       = HAL_SPI_RxCpltCallback;       /* Legacy weak RxCpltCallback       */
+    hspi->TxRxCpltCallback     = HAL_SPI_TxRxCpltCallback;     /* Legacy weak TxRxCpltCallback     */
+    hspi->TxHalfCpltCallback   = HAL_SPI_TxHalfCpltCallback;   /* Legacy weak TxHalfCpltCallback   */
+    hspi->RxHalfCpltCallback   = HAL_SPI_RxHalfCpltCallback;   /* Legacy weak RxHalfCpltCallback   */
+    hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */
+    hspi->ErrorCallback        = HAL_SPI_ErrorCallback;        /* Legacy weak ErrorCallback        */
+    hspi->AbortCpltCallback    = HAL_SPI_AbortCpltCallback;    /* Legacy weak AbortCpltCallback    */
+
+    if (hspi->MspInitCallback == NULL)
+    {
+      hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit  */
+    }
+
+    /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+    hspi->MspInitCallback(hspi);
+#else
+    /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+    HAL_SPI_MspInit(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+  }
+
+  hspi->State = HAL_SPI_STATE_BUSY;
+
+  /* Disable the selected SPI peripheral */
+  __HAL_SPI_DISABLE(hspi);
+
+  /* Align by default the rs fifo threshold on the data size */
+  if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    frxth = SPI_RXFIFO_THRESHOLD_HF;
+  }
+  else
+  {
+    frxth = SPI_RXFIFO_THRESHOLD_QF;
+  }
+
+  /* CRC calculation is valid only for 16Bit and 8 Bit */
+  if ((hspi->Init.DataSize != SPI_DATASIZE_16BIT) && (hspi->Init.DataSize != SPI_DATASIZE_8BIT))
+  {
+    /* CRC must be disabled */
+    hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+  }
+
+  /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/
+  /* Configure : SPI Mode, Communication Mode, Clock polarity and phase, NSS management,
+  Communication speed, First bit and CRC calculation state */
+  WRITE_REG(hspi->Instance->CR1, ((hspi->Init.Mode & (SPI_CR1_MSTR | SPI_CR1_SSI)) |
+                                  (hspi->Init.Direction & (SPI_CR1_RXONLY | SPI_CR1_BIDIMODE)) |
+                                  (hspi->Init.CLKPolarity & SPI_CR1_CPOL) |
+                                  (hspi->Init.CLKPhase & SPI_CR1_CPHA) |
+                                  (hspi->Init.NSS & SPI_CR1_SSM) |
+                                  (hspi->Init.BaudRatePrescaler & SPI_CR1_BR_Msk) |
+                                  (hspi->Init.FirstBit  & SPI_CR1_LSBFIRST) |
+                                  (hspi->Init.CRCCalculation & SPI_CR1_CRCEN)));
+#if (USE_SPI_CRC != 0U)
+  /*---------------------------- SPIx CRCL Configuration -------------------*/
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    /* Align the CRC Length on the data size */
+    if (hspi->Init.CRCLength == SPI_CRC_LENGTH_DATASIZE)
+    {
+      /* CRC Length aligned on the data size : value set by default */
+      if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+      {
+        hspi->Init.CRCLength = SPI_CRC_LENGTH_16BIT;
+      }
+      else
+      {
+        hspi->Init.CRCLength = SPI_CRC_LENGTH_8BIT;
+      }
+    }
+
+    /* Configure : CRC Length */
+    if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
+    {
+      SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCL);
+    }
+  }
+#endif /* USE_SPI_CRC */
+
+  /* Configure : NSS management, TI Mode, NSS Pulse, Data size and Rx Fifo threshold */
+  WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) |
+                                  (hspi->Init.TIMode & SPI_CR2_FRF) |
+                                  (hspi->Init.NSSPMode & SPI_CR2_NSSP) |
+                                  (hspi->Init.DataSize & SPI_CR2_DS_Msk) |
+                                  (frxth & SPI_CR2_FRXTH)));
+
+#if (USE_SPI_CRC != 0U)
+  /*---------------------------- SPIx CRCPOLY Configuration ------------------*/
+  /* Configure : CRC Polynomial */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    WRITE_REG(hspi->Instance->CRCPR, (hspi->Init.CRCPolynomial & SPI_CRCPR_CRCPOLY_Msk));
+  }
+#endif /* USE_SPI_CRC */
+
+#if defined(SPI_I2SCFGR_I2SMOD)
+  /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */
+  CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD);
+#endif /* SPI_I2SCFGR_I2SMOD */
+
+  hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+  hspi->State     = HAL_SPI_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  De-Initialize the SPI peripheral.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi)
+{
+  /* Check the SPI handle allocation */
+  if (hspi == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check SPI Instance parameter */
+  assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
+
+  hspi->State = HAL_SPI_STATE_BUSY;
+
+  /* Disable the SPI Peripheral Clock */
+  __HAL_SPI_DISABLE(hspi);
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  if (hspi->MspDeInitCallback == NULL)
+  {
+    hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit  */
+  }
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+  hspi->MspDeInitCallback(hspi);
+#else
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+  HAL_SPI_MspDeInit(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+
+  hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+  hspi->State = HAL_SPI_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the SPI MSP.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_MspInit should be implemented in the user file
+   */
+}
+
+/**
+  * @brief  De-Initialize the SPI MSP.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_MspDeInit should be implemented in the user file
+   */
+}
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+/**
+  * @brief  Register a User SPI Callback
+  *         To be used instead of the weak predefined callback
+  * @param  hspi Pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for the specified SPI.
+  * @param  CallbackID ID of the callback to be registered
+  * @param  pCallback pointer to the Callback function
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID,
+                                           pSPI_CallbackTypeDef pCallback)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if (pCallback == NULL)
+  {
+    /* Update the error code */
+    hspi->ErrorCode |= HAL_SPI_ERROR_INVALID_CALLBACK;
+
+    return HAL_ERROR;
+  }
+  /* Process locked */
+  __HAL_LOCK(hspi);
+
+  if (HAL_SPI_STATE_READY == hspi->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_SPI_TX_COMPLETE_CB_ID :
+        hspi->TxCpltCallback = pCallback;
+        break;
+
+      case HAL_SPI_RX_COMPLETE_CB_ID :
+        hspi->RxCpltCallback = pCallback;
+        break;
+
+      case HAL_SPI_TX_RX_COMPLETE_CB_ID :
+        hspi->TxRxCpltCallback = pCallback;
+        break;
+
+      case HAL_SPI_TX_HALF_COMPLETE_CB_ID :
+        hspi->TxHalfCpltCallback = pCallback;
+        break;
+
+      case HAL_SPI_RX_HALF_COMPLETE_CB_ID :
+        hspi->RxHalfCpltCallback = pCallback;
+        break;
+
+      case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID :
+        hspi->TxRxHalfCpltCallback = pCallback;
+        break;
+
+      case HAL_SPI_ERROR_CB_ID :
+        hspi->ErrorCallback = pCallback;
+        break;
+
+      case HAL_SPI_ABORT_CB_ID :
+        hspi->AbortCpltCallback = pCallback;
+        break;
+
+      case HAL_SPI_MSPINIT_CB_ID :
+        hspi->MspInitCallback = pCallback;
+        break;
+
+      case HAL_SPI_MSPDEINIT_CB_ID :
+        hspi->MspDeInitCallback = pCallback;
+        break;
+
+      default :
+        /* Update the error code */
+        SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK);
+
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else if (HAL_SPI_STATE_RESET == hspi->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_SPI_MSPINIT_CB_ID :
+        hspi->MspInitCallback = pCallback;
+        break;
+
+      case HAL_SPI_MSPDEINIT_CB_ID :
+        hspi->MspDeInitCallback = pCallback;
+        break;
+
+      default :
+        /* Update the error code */
+        SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK);
+
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else
+  {
+    /* Update the error code */
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK);
+
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hspi);
+  return status;
+}
+
+/**
+  * @brief  Unregister an SPI Callback
+  *         SPI callback is redirected to the weak predefined callback
+  * @param  hspi Pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for the specified SPI.
+  * @param  CallbackID ID of the callback to be unregistered
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process locked */
+  __HAL_LOCK(hspi);
+
+  if (HAL_SPI_STATE_READY == hspi->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_SPI_TX_COMPLETE_CB_ID :
+        hspi->TxCpltCallback = HAL_SPI_TxCpltCallback;             /* Legacy weak TxCpltCallback       */
+        break;
+
+      case HAL_SPI_RX_COMPLETE_CB_ID :
+        hspi->RxCpltCallback = HAL_SPI_RxCpltCallback;             /* Legacy weak RxCpltCallback       */
+        break;
+
+      case HAL_SPI_TX_RX_COMPLETE_CB_ID :
+        hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback;         /* Legacy weak TxRxCpltCallback     */
+        break;
+
+      case HAL_SPI_TX_HALF_COMPLETE_CB_ID :
+        hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback;     /* Legacy weak TxHalfCpltCallback   */
+        break;
+
+      case HAL_SPI_RX_HALF_COMPLETE_CB_ID :
+        hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback;     /* Legacy weak RxHalfCpltCallback   */
+        break;
+
+      case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID :
+        hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */
+        break;
+
+      case HAL_SPI_ERROR_CB_ID :
+        hspi->ErrorCallback = HAL_SPI_ErrorCallback;               /* Legacy weak ErrorCallback        */
+        break;
+
+      case HAL_SPI_ABORT_CB_ID :
+        hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback;       /* Legacy weak AbortCpltCallback    */
+        break;
+
+      case HAL_SPI_MSPINIT_CB_ID :
+        hspi->MspInitCallback = HAL_SPI_MspInit;                   /* Legacy weak MspInit              */
+        break;
+
+      case HAL_SPI_MSPDEINIT_CB_ID :
+        hspi->MspDeInitCallback = HAL_SPI_MspDeInit;               /* Legacy weak MspDeInit            */
+        break;
+
+      default :
+        /* Update the error code */
+        SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK);
+
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else if (HAL_SPI_STATE_RESET == hspi->State)
+  {
+    switch (CallbackID)
+    {
+      case HAL_SPI_MSPINIT_CB_ID :
+        hspi->MspInitCallback = HAL_SPI_MspInit;                   /* Legacy weak MspInit              */
+        break;
+
+      case HAL_SPI_MSPDEINIT_CB_ID :
+        hspi->MspDeInitCallback = HAL_SPI_MspDeInit;               /* Legacy weak MspDeInit            */
+        break;
+
+      default :
+        /* Update the error code */
+        SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK);
+
+        /* Return error status */
+        status =  HAL_ERROR;
+        break;
+    }
+  }
+  else
+  {
+    /* Update the error code */
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK);
+
+    /* Return error status */
+    status =  HAL_ERROR;
+  }
+
+  /* Release Lock */
+  __HAL_UNLOCK(hspi);
+  return status;
+}
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Exported_Functions_Group2 IO operation functions
+  *  @brief   Data transfers functions
+  *
+@verbatim
+  ==============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+ [..]
+    This subsection provides a set of functions allowing to manage the SPI
+    data transfers.
+
+    [..] The SPI supports master and slave mode :
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode: The communication is performed in polling mode.
+            The HAL status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode: The communication is performed using Interrupts
+            or DMA, These APIs return the HAL status.
+            The end of the data processing will be indicated through the
+            dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when
+            using DMA mode.
+            The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks
+            will be executed respectively at the end of the transmit or Receive process
+            The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected
+
+    (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA)
+        exist for 1Line (simplex) and 2Lines (full duplex) modes.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Transmit an amount of data in blocking mode.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pData pointer to data buffer
+  * @param  Size amount of data to be sent
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tickstart;
+  HAL_StatusTypeDef errorcode = HAL_OK;
+  uint16_t initial_TxXferCount;
+
+  /* Check Direction parameter */
+  assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  /* Init tickstart for timeout management*/
+  tickstart = HAL_GetTick();
+  initial_TxXferCount = Size;
+
+  if (hspi->State != HAL_SPI_STATE_READY)
+  {
+    errorcode = HAL_BUSY;
+    goto error;
+  }
+
+  if ((pData == NULL) || (Size == 0U))
+  {
+    errorcode = HAL_ERROR;
+    goto error;
+  }
+
+  /* Set the transaction information */
+  hspi->State       = HAL_SPI_STATE_BUSY_TX;
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pTxBuffPtr  = (uint8_t *)pData;
+  hspi->TxXferSize  = Size;
+  hspi->TxXferCount = Size;
+
+  /*Init field not used in handle to zero */
+  hspi->pRxBuffPtr  = (uint8_t *)NULL;
+  hspi->RxXferSize  = 0U;
+  hspi->RxXferCount = 0U;
+  hspi->TxISR       = NULL;
+  hspi->RxISR       = NULL;
+
+  /* Configure communication direction : 1Line */
+  if (hspi->Init.Direction == SPI_DIRECTION_1LINE)
+  {
+    /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */
+    __HAL_SPI_DISABLE(hspi);
+    SPI_1LINE_TX(hspi);
+  }
+
+#if (USE_SPI_CRC != 0U)
+  /* Reset CRC Calculation */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SPI_RESET_CRC(hspi);
+  }
+#endif /* USE_SPI_CRC */
+
+  /* Check if the SPI is already enabled */
+  if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */
+    __HAL_SPI_ENABLE(hspi);
+  }
+
+  /* Transmit data in 16 Bit mode */
+  if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U))
+    {
+      hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+      hspi->pTxBuffPtr += sizeof(uint16_t);
+      hspi->TxXferCount--;
+    }
+    /* Transmit data in 16 Bit mode */
+    while (hspi->TxXferCount > 0U)
+    {
+      /* Wait until TXE flag is set to send data */
+      if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE))
+      {
+        hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+        hspi->pTxBuffPtr += sizeof(uint16_t);
+        hspi->TxXferCount--;
+      }
+      else
+      {
+        /* Timeout management */
+        if ((((HAL_GetTick() - tickstart) >=  Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U))
+        {
+          errorcode = HAL_TIMEOUT;
+          goto error;
+        }
+      }
+    }
+  }
+  /* Transmit data in 8 Bit mode */
+  else
+  {
+    if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U))
+    {
+      *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr);
+      hspi->pTxBuffPtr += sizeof(uint8_t);
+      hspi->TxXferCount--;
+    }
+    while (hspi->TxXferCount > 0U)
+    {
+      /* Wait until TXE flag is set to send data */
+      if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE))
+      {
+        *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr);
+        hspi->pTxBuffPtr += sizeof(uint8_t);
+        hspi->TxXferCount--;
+      }
+      else
+      {
+        /* Timeout management */
+        if ((((HAL_GetTick() - tickstart) >=  Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U))
+        {
+          errorcode = HAL_TIMEOUT;
+          goto error;
+        }
+      }
+    }
+  }
+#if (USE_SPI_CRC != 0U)
+  /* Enable CRC Transmission */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+  }
+#endif /* USE_SPI_CRC */
+
+  /* Check the end of the transaction */
+  if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK)
+  {
+    hspi->ErrorCode = HAL_SPI_ERROR_FLAG;
+  }
+
+  /* Clear overrun flag in 2 Lines communication mode because received is not read */
+  if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+  {
+    __HAL_SPI_CLEAR_OVRFLAG(hspi);
+  }
+
+  if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+  {
+    errorcode = HAL_ERROR;
+  }
+
+error:
+  hspi->State = HAL_SPI_STATE_READY;
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+  return errorcode;
+}
+
+/**
+  * @brief  Receive an amount of data in blocking mode.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pData pointer to data buffer
+  * @param  Size amount of data to be received
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+#if (USE_SPI_CRC != 0U)
+  __IO uint32_t tmpreg = 0U;
+  __IO uint8_t  * ptmpreg8;
+  __IO uint8_t  tmpreg8 = 0;
+#endif /* USE_SPI_CRC */
+  uint32_t tickstart;
+  HAL_StatusTypeDef errorcode = HAL_OK;
+
+  if ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
+  {
+    hspi->State = HAL_SPI_STATE_BUSY_RX;
+    /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+    return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout);
+  }
+
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  /* Init tickstart for timeout management*/
+  tickstart = HAL_GetTick();
+
+  if (hspi->State != HAL_SPI_STATE_READY)
+  {
+    errorcode = HAL_BUSY;
+    goto error;
+  }
+
+  if ((pData == NULL) || (Size == 0U))
+  {
+    errorcode = HAL_ERROR;
+    goto error;
+  }
+
+  /* Set the transaction information */
+  hspi->State       = HAL_SPI_STATE_BUSY_RX;
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pRxBuffPtr  = (uint8_t *)pData;
+  hspi->RxXferSize  = Size;
+  hspi->RxXferCount = Size;
+
+  /*Init field not used in handle to zero */
+  hspi->pTxBuffPtr  = (uint8_t *)NULL;
+  hspi->TxXferSize  = 0U;
+  hspi->TxXferCount = 0U;
+  hspi->RxISR       = NULL;
+  hspi->TxISR       = NULL;
+
+#if (USE_SPI_CRC != 0U)
+  /* Reset CRC Calculation */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SPI_RESET_CRC(hspi);
+    /* this is done to handle the CRCNEXT before the latest data */
+    hspi->RxXferCount--;
+  }
+#endif /* USE_SPI_CRC */
+
+  /* Set the Rx Fifo threshold */
+  if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    /* Set RX Fifo threshold according the reception data length: 16bit */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+  else
+  {
+    /* Set RX Fifo threshold according the reception data length: 8bit */
+    SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+
+  /* Configure communication direction: 1Line */
+  if (hspi->Init.Direction == SPI_DIRECTION_1LINE)
+  {
+    /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */
+    __HAL_SPI_DISABLE(hspi);
+    SPI_1LINE_RX(hspi);
+  }
+
+  /* Check if the SPI is already enabled */
+  if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */
+    __HAL_SPI_ENABLE(hspi);
+  }
+
+  /* Receive data in 8 Bit mode */
+  if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT)
+  {
+    /* Transfer loop */
+    while (hspi->RxXferCount > 0U)
+    {
+      /* Check the RXNE flag */
+      if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE))
+      {
+        /* read the received data */
+        (* (uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR;
+        hspi->pRxBuffPtr += sizeof(uint8_t);
+        hspi->RxXferCount--;
+      }
+      else
+      {
+        /* Timeout management */
+        if ((((HAL_GetTick() - tickstart) >=  Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U))
+        {
+          errorcode = HAL_TIMEOUT;
+          goto error;
+        }
+      }
+    }
+  }
+  else
+  {
+    /* Transfer loop */
+    while (hspi->RxXferCount > 0U)
+    {
+      /* Check the RXNE flag */
+      if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE))
+      {
+        *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR;
+        hspi->pRxBuffPtr += sizeof(uint16_t);
+        hspi->RxXferCount--;
+      }
+      else
+      {
+        /* Timeout management */
+        if ((((HAL_GetTick() - tickstart) >=  Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U))
+        {
+          errorcode = HAL_TIMEOUT;
+          goto error;
+        }
+      }
+    }
+  }
+
+#if (USE_SPI_CRC != 0U)
+  /* Handle the CRC Transmission */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    /* freeze the CRC before the latest data */
+    SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+
+    /* Read the latest data */
+    if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+    {
+      /* the latest data has not been received */
+      errorcode = HAL_TIMEOUT;
+      goto error;
+    }
+
+    /* Receive last data in 16 Bit mode */
+    if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+    {
+      *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR;
+    }
+    /* Receive last data in 8 Bit mode */
+    else
+    {
+      (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR;
+    }
+
+    /* Wait the CRC data */
+    if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+    {
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+      errorcode = HAL_TIMEOUT;
+      goto error;
+    }
+
+    /* Read CRC to Flush DR and RXNE flag */
+    if (hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+    {
+      /* Read 16bit CRC */
+      tmpreg = READ_REG(hspi->Instance->DR);
+      /* To avoid GCC warning */
+      UNUSED(tmpreg);
+    }
+    else
+    {
+      /* Initialize the 8bit temporary pointer */
+      ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
+      /* Read 8bit CRC */
+      tmpreg8 = *ptmpreg8;
+      /* To avoid GCC warning */
+      UNUSED(tmpreg8);
+
+      if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT))
+      {
+        if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+        {
+          /* Error on the CRC reception */
+          SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+          errorcode = HAL_TIMEOUT;
+          goto error;
+        }
+        /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */
+        tmpreg8 = *ptmpreg8;
+        /* To avoid GCC warning */
+        UNUSED(tmpreg8);
+      }
+    }
+  }
+#endif /* USE_SPI_CRC */
+
+  /* Check the end of the transaction */
+  if (SPI_EndRxTransaction(hspi, Timeout, tickstart) != HAL_OK)
+  {
+    hspi->ErrorCode = HAL_SPI_ERROR_FLAG;
+  }
+
+#if (USE_SPI_CRC != 0U)
+  /* Check if CRC error occurred */
+  if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR))
+  {
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+    __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+  }
+#endif /* USE_SPI_CRC */
+
+  if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+  {
+    errorcode = HAL_ERROR;
+  }
+
+error :
+  hspi->State = HAL_SPI_STATE_READY;
+  __HAL_UNLOCK(hspi);
+  return errorcode;
+}
+
+/**
+  * @brief  Transmit and Receive an amount of data in blocking mode.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pTxData pointer to transmission data buffer
+  * @param  pRxData pointer to reception data buffer
+  * @param  Size amount of data to be sent and received
+  * @param  Timeout Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size,
+                                          uint32_t Timeout)
+{
+  uint16_t             initial_TxXferCount;
+  uint32_t             tmp_mode;
+  HAL_SPI_StateTypeDef tmp_state;
+  uint32_t             tickstart;
+#if (USE_SPI_CRC != 0U)
+  __IO uint32_t tmpreg = 0U;
+  uint32_t             spi_cr1;
+  uint32_t             spi_cr2;
+  __IO uint8_t  * ptmpreg8;
+  __IO uint8_t  tmpreg8 = 0;
+#endif /* USE_SPI_CRC */
+
+  /* Variable used to alternate Rx and Tx during transfer */
+  uint32_t             txallowed = 1U;
+  HAL_StatusTypeDef    errorcode = HAL_OK;
+
+  /* Check Direction parameter */
+  assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  /* Init tickstart for timeout management*/
+  tickstart = HAL_GetTick();
+
+  /* Init temporary variables */
+  tmp_state           = hspi->State;
+  tmp_mode            = hspi->Init.Mode;
+  initial_TxXferCount = Size;
+#if (USE_SPI_CRC != 0U)
+  spi_cr1             = READ_REG(hspi->Instance->CR1);
+  spi_cr2             = READ_REG(hspi->Instance->CR2);
+#endif /* USE_SPI_CRC */
+
+  if (!((tmp_state == HAL_SPI_STATE_READY) || \
+        ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX))))
+  {
+    errorcode = HAL_BUSY;
+    goto error;
+  }
+
+  if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+  {
+    errorcode = HAL_ERROR;
+    goto error;
+  }
+
+  /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+  if (hspi->State != HAL_SPI_STATE_BUSY_RX)
+  {
+    hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+  }
+
+  /* Set the transaction information */
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pRxBuffPtr  = (uint8_t *)pRxData;
+  hspi->RxXferCount = Size;
+  hspi->RxXferSize  = Size;
+  hspi->pTxBuffPtr  = (uint8_t *)pTxData;
+  hspi->TxXferCount = Size;
+  hspi->TxXferSize  = Size;
+
+  /*Init field not used in handle to zero */
+  hspi->RxISR       = NULL;
+  hspi->TxISR       = NULL;
+
+#if (USE_SPI_CRC != 0U)
+  /* Reset CRC Calculation */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SPI_RESET_CRC(hspi);
+  }
+#endif /* USE_SPI_CRC */
+
+  /* Set the Rx Fifo threshold */
+  if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    /* Set fiforxthreshold according the reception data length: 16bit */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+  else
+  {
+    /* Set fiforxthreshold according the reception data length: 8bit */
+    SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+
+  /* Check if the SPI is already enabled */
+  if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */
+    __HAL_SPI_ENABLE(hspi);
+  }
+
+  /* Transmit and Receive data in 16 Bit mode */
+  if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U))
+    {
+      hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+      hspi->pTxBuffPtr += sizeof(uint16_t);
+      hspi->TxXferCount--;
+    }
+    while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U))
+    {
+      /* Check TXE flag */
+      if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U))
+      {
+        hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+        hspi->pTxBuffPtr += sizeof(uint16_t);
+        hspi->TxXferCount--;
+        /* Next Data is a reception (Rx). Tx not allowed */
+        txallowed = 0U;
+
+#if (USE_SPI_CRC != 0U)
+        /* Enable CRC Transmission */
+        if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+        {
+          /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */
+          if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP))
+          {
+            SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM);
+          }
+          SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+        }
+#endif /* USE_SPI_CRC */
+      }
+
+      /* Check RXNE flag */
+      if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U))
+      {
+        *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR;
+        hspi->pRxBuffPtr += sizeof(uint16_t);
+        hspi->RxXferCount--;
+        /* Next Data is a Transmission (Tx). Tx is allowed */
+        txallowed = 1U;
+      }
+      if (((HAL_GetTick() - tickstart) >=  Timeout) && (Timeout != HAL_MAX_DELAY))
+      {
+        errorcode = HAL_TIMEOUT;
+        goto error;
+      }
+    }
+  }
+  /* Transmit and Receive data in 8 Bit mode */
+  else
+  {
+    if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U))
+    {
+      *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr);
+      hspi->pTxBuffPtr += sizeof(uint8_t);
+      hspi->TxXferCount--;
+    }
+    while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U))
+    {
+      /* Check TXE flag */
+      if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U))
+      {
+        *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr);
+        hspi->pTxBuffPtr++;
+        hspi->TxXferCount--;
+        /* Next Data is a reception (Rx). Tx not allowed */
+        txallowed = 0U;
+
+#if (USE_SPI_CRC != 0U)
+        /* Enable CRC Transmission */
+        if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+        {
+          /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */
+          if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP))
+          {
+            SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM);
+          }
+          SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+        }
+#endif /* USE_SPI_CRC */
+      }
+
+      /* Wait until RXNE flag is reset */
+      if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U))
+      {
+        (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR;
+        hspi->pRxBuffPtr++;
+        hspi->RxXferCount--;
+        /* Next Data is a Transmission (Tx). Tx is allowed */
+        txallowed = 1U;
+      }
+      if ((((HAL_GetTick() - tickstart) >=  Timeout) && ((Timeout != HAL_MAX_DELAY))) || (Timeout == 0U))
+      {
+        errorcode = HAL_TIMEOUT;
+        goto error;
+      }
+    }
+  }
+
+#if (USE_SPI_CRC != 0U)
+  /* Read CRC from DR to close CRC calculation process */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    /* Wait until TXE flag */
+    if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+    {
+      /* Error on the CRC reception */
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+      errorcode = HAL_TIMEOUT;
+      goto error;
+    }
+    /* Read CRC */
+    if (hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+    {
+      /* Read 16bit CRC */
+      tmpreg = READ_REG(hspi->Instance->DR);
+      /* To avoid GCC warning */
+      UNUSED(tmpreg);
+    }
+    else
+    {
+      /* Initialize the 8bit temporary pointer */
+      ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
+      /* Read 8bit CRC */
+      tmpreg8 = *ptmpreg8;
+      /* To avoid GCC warning */
+      UNUSED(tmpreg8);
+
+      if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
+      {
+        if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+        {
+          /* Error on the CRC reception */
+          SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+          errorcode = HAL_TIMEOUT;
+          goto error;
+        }
+        /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */
+        tmpreg8 = *ptmpreg8;
+        /* To avoid GCC warning */
+        UNUSED(tmpreg8);
+      }
+    }
+  }
+
+  /* Check if CRC error occurred */
+  if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR))
+  {
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+    /* Clear CRC Flag */
+    __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+
+    errorcode = HAL_ERROR;
+  }
+#endif /* USE_SPI_CRC */
+
+  /* Check the end of the transaction */
+  if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK)
+  {
+    errorcode = HAL_ERROR;
+    hspi->ErrorCode = HAL_SPI_ERROR_FLAG;
+  }
+
+error :
+  hspi->State = HAL_SPI_STATE_READY;
+  __HAL_UNLOCK(hspi);
+  return errorcode;
+}
+
+/**
+  * @brief  Transmit an amount of data in non-blocking mode with Interrupt.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pData pointer to data buffer
+  * @param  Size amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  HAL_StatusTypeDef errorcode = HAL_OK;
+
+  /* Check Direction parameter */
+  assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  if ((pData == NULL) || (Size == 0U))
+  {
+    errorcode = HAL_ERROR;
+    goto error;
+  }
+
+  if (hspi->State != HAL_SPI_STATE_READY)
+  {
+    errorcode = HAL_BUSY;
+    goto error;
+  }
+
+  /* Set the transaction information */
+  hspi->State       = HAL_SPI_STATE_BUSY_TX;
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pTxBuffPtr  = (uint8_t *)pData;
+  hspi->TxXferSize  = Size;
+  hspi->TxXferCount = Size;
+
+  /* Init field not used in handle to zero */
+  hspi->pRxBuffPtr  = (uint8_t *)NULL;
+  hspi->RxXferSize  = 0U;
+  hspi->RxXferCount = 0U;
+  hspi->RxISR       = NULL;
+
+  /* Set the function for IT treatment */
+  if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    hspi->TxISR = SPI_TxISR_16BIT;
+  }
+  else
+  {
+    hspi->TxISR = SPI_TxISR_8BIT;
+  }
+
+  /* Configure communication direction : 1Line */
+  if (hspi->Init.Direction == SPI_DIRECTION_1LINE)
+  {
+    /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */
+    __HAL_SPI_DISABLE(hspi);
+    SPI_1LINE_TX(hspi);
+  }
+
+#if (USE_SPI_CRC != 0U)
+  /* Reset CRC Calculation */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SPI_RESET_CRC(hspi);
+  }
+#endif /* USE_SPI_CRC */
+
+  /* Enable TXE and ERR interrupt */
+  __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+
+
+  /* Check if the SPI is already enabled */
+  if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */
+    __HAL_SPI_ENABLE(hspi);
+  }
+
+error :
+  __HAL_UNLOCK(hspi);
+  return errorcode;
+}
+
+/**
+  * @brief  Receive an amount of data in non-blocking mode with Interrupt.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pData pointer to data buffer
+  * @param  Size amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  HAL_StatusTypeDef errorcode = HAL_OK;
+
+  if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER))
+  {
+    hspi->State = HAL_SPI_STATE_BUSY_RX;
+    /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+    return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size);
+  }
+
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  if (hspi->State != HAL_SPI_STATE_READY)
+  {
+    errorcode = HAL_BUSY;
+    goto error;
+  }
+
+  if ((pData == NULL) || (Size == 0U))
+  {
+    errorcode = HAL_ERROR;
+    goto error;
+  }
+
+  /* Set the transaction information */
+  hspi->State       = HAL_SPI_STATE_BUSY_RX;
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pRxBuffPtr  = (uint8_t *)pData;
+  hspi->RxXferSize  = Size;
+  hspi->RxXferCount = Size;
+
+  /* Init field not used in handle to zero */
+  hspi->pTxBuffPtr  = (uint8_t *)NULL;
+  hspi->TxXferSize  = 0U;
+  hspi->TxXferCount = 0U;
+  hspi->TxISR       = NULL;
+
+  /* Check the data size to adapt Rx threshold and the set the function for IT treatment */
+  if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    /* Set RX Fifo threshold according the reception data length: 16 bit */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+    hspi->RxISR = SPI_RxISR_16BIT;
+  }
+  else
+  {
+    /* Set RX Fifo threshold according the reception data length: 8 bit */
+    SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+    hspi->RxISR = SPI_RxISR_8BIT;
+  }
+
+  /* Configure communication direction : 1Line */
+  if (hspi->Init.Direction == SPI_DIRECTION_1LINE)
+  {
+    /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */
+    __HAL_SPI_DISABLE(hspi);
+    SPI_1LINE_RX(hspi);
+  }
+
+#if (USE_SPI_CRC != 0U)
+  /* Reset CRC Calculation */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    hspi->CRCSize = 1U;
+    if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT))
+    {
+      hspi->CRCSize = 2U;
+    }
+    SPI_RESET_CRC(hspi);
+  }
+  else
+  {
+    hspi->CRCSize = 0U;
+  }
+#endif /* USE_SPI_CRC */
+
+  /* Enable TXE and ERR interrupt */
+  __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+  /* Note : The SPI must be enabled after unlocking current process
+            to avoid the risk of SPI interrupt handle execution before current
+            process unlock */
+
+  /* Check if the SPI is already enabled */
+  if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */
+    __HAL_SPI_ENABLE(hspi);
+  }
+
+error :
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+  return errorcode;
+}
+
+/**
+  * @brief  Transmit and Receive an amount of data in non-blocking mode with Interrupt.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pTxData pointer to transmission data buffer
+  * @param  pRxData pointer to reception data buffer
+  * @param  Size amount of data to be sent and received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+  uint32_t             tmp_mode;
+  HAL_SPI_StateTypeDef tmp_state;
+  HAL_StatusTypeDef    errorcode = HAL_OK;
+
+  /* Check Direction parameter */
+  assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+  /* Process locked */
+  __HAL_LOCK(hspi);
+
+  /* Init temporary variables */
+  tmp_state           = hspi->State;
+  tmp_mode            = hspi->Init.Mode;
+
+  if (!((tmp_state == HAL_SPI_STATE_READY) || \
+        ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX))))
+  {
+    errorcode = HAL_BUSY;
+    goto error;
+  }
+
+  if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+  {
+    errorcode = HAL_ERROR;
+    goto error;
+  }
+
+  /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+  if (hspi->State != HAL_SPI_STATE_BUSY_RX)
+  {
+    hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+  }
+
+  /* Set the transaction information */
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pTxBuffPtr  = (uint8_t *)pTxData;
+  hspi->TxXferSize  = Size;
+  hspi->TxXferCount = Size;
+  hspi->pRxBuffPtr  = (uint8_t *)pRxData;
+  hspi->RxXferSize  = Size;
+  hspi->RxXferCount = Size;
+
+  /* Set the function for IT treatment */
+  if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    hspi->RxISR     = SPI_2linesRxISR_16BIT;
+    hspi->TxISR     = SPI_2linesTxISR_16BIT;
+  }
+  else
+  {
+    hspi->RxISR     = SPI_2linesRxISR_8BIT;
+    hspi->TxISR     = SPI_2linesTxISR_8BIT;
+  }
+
+#if (USE_SPI_CRC != 0U)
+  /* Reset CRC Calculation */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    hspi->CRCSize = 1U;
+    if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT))
+    {
+      hspi->CRCSize = 2U;
+    }
+    SPI_RESET_CRC(hspi);
+  }
+  else
+  {
+    hspi->CRCSize = 0U;
+  }
+#endif /* USE_SPI_CRC */
+
+  /* Check if packing mode is enabled and if there is more than 2 data to receive */
+  if ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (Size >= 2U))
+  {
+    /* Set RX Fifo threshold according the reception data length: 16 bit */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+  else
+  {
+    /* Set RX Fifo threshold according the reception data length: 8 bit */
+    SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+
+  /* Enable TXE, RXNE and ERR interrupt */
+  __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+  /* Check if the SPI is already enabled */
+  if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */
+    __HAL_SPI_ENABLE(hspi);
+  }
+
+error :
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+  return errorcode;
+}
+
+/**
+  * @brief  Transmit an amount of data in non-blocking mode with DMA.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pData pointer to data buffer
+  * @param  Size amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  HAL_StatusTypeDef errorcode = HAL_OK;
+
+  /* Check tx dma handle */
+  assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx));
+
+  /* Check Direction parameter */
+  assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  if (hspi->State != HAL_SPI_STATE_READY)
+  {
+    errorcode = HAL_BUSY;
+    goto error;
+  }
+
+  if ((pData == NULL) || (Size == 0U))
+  {
+    errorcode = HAL_ERROR;
+    goto error;
+  }
+
+  /* Set the transaction information */
+  hspi->State       = HAL_SPI_STATE_BUSY_TX;
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pTxBuffPtr  = (uint8_t *)pData;
+  hspi->TxXferSize  = Size;
+  hspi->TxXferCount = Size;
+
+  /* Init field not used in handle to zero */
+  hspi->pRxBuffPtr  = (uint8_t *)NULL;
+  hspi->TxISR       = NULL;
+  hspi->RxISR       = NULL;
+  hspi->RxXferSize  = 0U;
+  hspi->RxXferCount = 0U;
+
+  /* Configure communication direction : 1Line */
+  if (hspi->Init.Direction == SPI_DIRECTION_1LINE)
+  {
+    /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */
+    __HAL_SPI_DISABLE(hspi);
+    SPI_1LINE_TX(hspi);
+  }
+
+#if (USE_SPI_CRC != 0U)
+  /* Reset CRC Calculation */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SPI_RESET_CRC(hspi);
+  }
+#endif /* USE_SPI_CRC */
+
+  /* Set the SPI TxDMA Half transfer complete callback */
+  hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt;
+
+  /* Set the SPI TxDMA transfer complete callback */
+  hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt;
+
+  /* Set the DMA error callback */
+  hspi->hdmatx->XferErrorCallback = SPI_DMAError;
+
+  /* Set the DMA AbortCpltCallback */
+  hspi->hdmatx->XferAbortCallback = NULL;
+
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+  /* Packing mode is enabled only if the DMA setting is HALWORD */
+  if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD))
+  {
+    /* Check the even/odd of the data size + crc if enabled */
+    if ((hspi->TxXferCount & 0x1U) == 0U)
+    {
+      CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+      hspi->TxXferCount = (hspi->TxXferCount >> 1U);
+    }
+    else
+    {
+      SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+      hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U;
+    }
+  }
+
+  /* Enable the Tx DMA Stream/Channel */
+  if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR,
+                                 hspi->TxXferCount))
+  {
+    /* Update SPI error code */
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+    errorcode = HAL_ERROR;
+
+    hspi->State = HAL_SPI_STATE_READY;
+    goto error;
+  }
+
+  /* Check if the SPI is already enabled */
+  if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */
+    __HAL_SPI_ENABLE(hspi);
+  }
+
+  /* Enable the SPI Error Interrupt Bit */
+  __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR));
+
+  /* Enable Tx DMA Request */
+  SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+error :
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+  return errorcode;
+}
+
+/**
+  * @brief  Receive an amount of data in non-blocking mode with DMA.
+  * @note   In case of MASTER mode and SPI_DIRECTION_2LINES direction, hdmatx shall be defined.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pData pointer to data buffer
+  * @note   When the CRC feature is enabled the pData Length must be Size + 1.
+  * @param  Size amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  HAL_StatusTypeDef errorcode = HAL_OK;
+
+  /* Check rx dma handle */
+  assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx));
+
+  if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER))
+  {
+    hspi->State = HAL_SPI_STATE_BUSY_RX;
+
+    /* Check tx dma handle */
+    assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx));
+
+    /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+    return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size);
+  }
+
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  if (hspi->State != HAL_SPI_STATE_READY)
+  {
+    errorcode = HAL_BUSY;
+    goto error;
+  }
+
+  if ((pData == NULL) || (Size == 0U))
+  {
+    errorcode = HAL_ERROR;
+    goto error;
+  }
+
+  /* Set the transaction information */
+  hspi->State       = HAL_SPI_STATE_BUSY_RX;
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pRxBuffPtr  = (uint8_t *)pData;
+  hspi->RxXferSize  = Size;
+  hspi->RxXferCount = Size;
+
+  /*Init field not used in handle to zero */
+  hspi->RxISR       = NULL;
+  hspi->TxISR       = NULL;
+  hspi->TxXferSize  = 0U;
+  hspi->TxXferCount = 0U;
+
+  /* Configure communication direction : 1Line */
+  if (hspi->Init.Direction == SPI_DIRECTION_1LINE)
+  {
+    /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */
+    __HAL_SPI_DISABLE(hspi);
+    SPI_1LINE_RX(hspi);
+  }
+
+#if (USE_SPI_CRC != 0U)
+  /* Reset CRC Calculation */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SPI_RESET_CRC(hspi);
+  }
+#endif /* USE_SPI_CRC */
+
+#if defined (STM32F030x6) || defined (STM32F030x8) || defined (STM32F031x6)|| defined (STM32F038xx) || defined (STM32F051x8) || defined (STM32F058xx)
+  /* Packing mode management is enabled by the DMA settings */
+  if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD))
+  {
+    /* Restriction the DMA data received is not allowed in this mode */
+    errorcode = HAL_ERROR;
+    goto error;
+  }
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || STM32F051x8 || STM32F058xx */
+
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+  if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    /* Set RX Fifo threshold according the reception data length: 16bit */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+  else
+  {
+    /* Set RX Fifo threshold according the reception data length: 8bit */
+    SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+
+    if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
+    {
+      /* Set RX Fifo threshold according the reception data length: 16bit */
+      CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+
+      if ((hspi->RxXferCount & 0x1U) == 0x0U)
+      {
+        CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+        hspi->RxXferCount = hspi->RxXferCount >> 1U;
+      }
+      else
+      {
+        SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+        hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U;
+      }
+    }
+  }
+
+  /* Set the SPI RxDMA Half transfer complete callback */
+  hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+
+  /* Set the SPI Rx DMA transfer complete callback */
+  hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+
+  /* Set the DMA error callback */
+  hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+  /* Set the DMA AbortCpltCallback */
+  hspi->hdmarx->XferAbortCallback = NULL;
+
+  /* Enable the Rx DMA Stream/Channel  */
+  if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr,
+                                 hspi->RxXferCount))
+  {
+    /* Update SPI error code */
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+    errorcode = HAL_ERROR;
+
+    hspi->State = HAL_SPI_STATE_READY;
+    goto error;
+  }
+
+  /* Check if the SPI is already enabled */
+  if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */
+    __HAL_SPI_ENABLE(hspi);
+  }
+
+  /* Enable the SPI Error Interrupt Bit */
+  __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR));
+
+  /* Enable Rx DMA Request */
+  SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+error:
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+  return errorcode;
+}
+
+/**
+  * @brief  Transmit and Receive an amount of data in non-blocking mode with DMA.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pTxData pointer to transmission data buffer
+  * @param  pRxData pointer to reception data buffer
+  * @note   When the CRC feature is enabled the pRxData Length must be Size + 1
+  * @param  Size amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
+                                              uint16_t Size)
+{
+  uint32_t             tmp_mode;
+  HAL_SPI_StateTypeDef tmp_state;
+  HAL_StatusTypeDef errorcode = HAL_OK;
+
+  /* Check rx & tx dma handles */
+  assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx));
+  assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx));
+
+  /* Check Direction parameter */
+  assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+  /* Process locked */
+  __HAL_LOCK(hspi);
+
+  /* Init temporary variables */
+  tmp_state           = hspi->State;
+  tmp_mode            = hspi->Init.Mode;
+
+  if (!((tmp_state == HAL_SPI_STATE_READY) ||
+        ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX))))
+  {
+    errorcode = HAL_BUSY;
+    goto error;
+  }
+
+  if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+  {
+    errorcode = HAL_ERROR;
+    goto error;
+  }
+
+  /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+  if (hspi->State != HAL_SPI_STATE_BUSY_RX)
+  {
+    hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+  }
+
+  /* Set the transaction information */
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pTxBuffPtr  = (uint8_t *)pTxData;
+  hspi->TxXferSize  = Size;
+  hspi->TxXferCount = Size;
+  hspi->pRxBuffPtr  = (uint8_t *)pRxData;
+  hspi->RxXferSize  = Size;
+  hspi->RxXferCount = Size;
+
+  /* Init field not used in handle to zero */
+  hspi->RxISR       = NULL;
+  hspi->TxISR       = NULL;
+
+#if (USE_SPI_CRC != 0U)
+  /* Reset CRC Calculation */
+  if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SPI_RESET_CRC(hspi);
+  }
+#endif /* USE_SPI_CRC */
+
+#if defined (STM32F030x6) || defined (STM32F030x8) || defined (STM32F031x6) || defined (STM32F038xx) || defined (STM32F051x8) || defined (STM32F058xx)
+  /* Packing mode management is enabled by the DMA settings */
+  if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD))
+  {
+    /* Restriction the DMA data received is not allowed in this mode */
+    errorcode = HAL_ERROR;
+    goto error;
+  }
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx || STM32F051x8 || STM32F058xx */
+
+  /* Reset the threshold bit */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX | SPI_CR2_LDMARX);
+
+  /* The packing mode management is enabled by the DMA settings according the spi data size */
+  if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    /* Set fiforxthreshold according the reception data length: 16bit */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+  else
+  {
+    /* Set RX Fifo threshold according the reception data length: 8bit */
+    SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+
+    if (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
+    {
+      if ((hspi->TxXferSize & 0x1U) == 0x0U)
+      {
+        CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+        hspi->TxXferCount = hspi->TxXferCount >> 1U;
+      }
+      else
+      {
+        SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+        hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U;
+      }
+    }
+
+    if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
+    {
+      /* Set RX Fifo threshold according the reception data length: 16bit */
+      CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+
+      if ((hspi->RxXferCount & 0x1U) == 0x0U)
+      {
+        CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+        hspi->RxXferCount = hspi->RxXferCount >> 1U;
+      }
+      else
+      {
+        SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+        hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U;
+      }
+    }
+  }
+
+  /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */
+  if (hspi->State == HAL_SPI_STATE_BUSY_RX)
+  {
+    /* Set the SPI Rx DMA Half transfer complete callback */
+    hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+    hspi->hdmarx->XferCpltCallback     = SPI_DMAReceiveCplt;
+  }
+  else
+  {
+    /* Set the SPI Tx/Rx DMA Half transfer complete callback */
+    hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt;
+    hspi->hdmarx->XferCpltCallback     = SPI_DMATransmitReceiveCplt;
+  }
+
+  /* Set the DMA error callback */
+  hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+  /* Set the DMA AbortCpltCallback */
+  hspi->hdmarx->XferAbortCallback = NULL;
+
+  /* Enable the Rx DMA Stream/Channel  */
+  if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr,
+                                 hspi->RxXferCount))
+  {
+    /* Update SPI error code */
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+    errorcode = HAL_ERROR;
+
+    hspi->State = HAL_SPI_STATE_READY;
+    goto error;
+  }
+
+  /* Enable Rx DMA Request */
+  SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+  /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing
+  is performed in DMA reception complete callback  */
+  hspi->hdmatx->XferHalfCpltCallback = NULL;
+  hspi->hdmatx->XferCpltCallback     = NULL;
+  hspi->hdmatx->XferErrorCallback    = NULL;
+  hspi->hdmatx->XferAbortCallback    = NULL;
+
+  /* Enable the Tx DMA Stream/Channel  */
+  if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR,
+                                 hspi->TxXferCount))
+  {
+    /* Update SPI error code */
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+    errorcode = HAL_ERROR;
+
+    hspi->State = HAL_SPI_STATE_READY;
+    goto error;
+  }
+
+  /* Check if the SPI is already enabled */
+  if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */
+    __HAL_SPI_ENABLE(hspi);
+  }
+  /* Enable the SPI Error Interrupt Bit */
+  __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR));
+
+  /* Enable Tx DMA Request */
+  SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+error :
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+  return errorcode;
+}
+
+/**
+  * @brief  Abort ongoing transfer (blocking mode).
+  * @param  hspi SPI handle.
+  * @note   This procedure could be used for aborting any ongoing transfer (Tx and Rx),
+  *         started in Interrupt or DMA mode.
+  *         This procedure performs following operations :
+  *           - Disable SPI Interrupts (depending of transfer direction)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  * @note   This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi)
+{
+  HAL_StatusTypeDef errorcode;
+  __IO uint32_t count;
+  __IO uint32_t resetcount;
+
+  /* Initialized local variable  */
+  errorcode = HAL_OK;
+  resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U);
+  count = resetcount;
+
+  /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE);
+
+  /* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */
+  if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE))
+  {
+    hspi->TxISR = SPI_AbortTx_ISR;
+    /* Wait HAL_SPI_STATE_ABORT state */
+    do
+    {
+      if (count == 0U)
+      {
+        SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+        break;
+      }
+      count--;
+    } while (hspi->State != HAL_SPI_STATE_ABORT);
+    /* Reset Timeout Counter */
+    count = resetcount;
+  }
+
+  if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE))
+  {
+    hspi->RxISR = SPI_AbortRx_ISR;
+    /* Wait HAL_SPI_STATE_ABORT state */
+    do
+    {
+      if (count == 0U)
+      {
+        SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+        break;
+      }
+      count--;
+    } while (hspi->State != HAL_SPI_STATE_ABORT);
+    /* Reset Timeout Counter */
+    count = resetcount;
+  }
+
+  /* Disable the SPI DMA Tx request if enabled */
+  if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN))
+  {
+    /* Abort the SPI DMA Tx Stream/Channel : use blocking DMA Abort API (no callback) */
+    if (hspi->hdmatx != NULL)
+    {
+      /* Set the SPI DMA Abort callback :
+      will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */
+      hspi->hdmatx->XferAbortCallback = NULL;
+
+      /* Abort DMA Tx Handle linked to SPI Peripheral */
+      if (HAL_DMA_Abort(hspi->hdmatx) != HAL_OK)
+      {
+        hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+      }
+
+      /* Disable Tx DMA Request */
+      CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN));
+
+      if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+      {
+        hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+      }
+
+      /* Disable SPI Peripheral */
+      __HAL_SPI_DISABLE(hspi);
+
+      /* Empty the FRLVL fifo */
+      if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+      {
+        hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+      }
+    }
+  }
+
+  /* Disable the SPI DMA Rx request if enabled */
+  if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN))
+  {
+    /* Abort the SPI DMA Rx Stream/Channel : use blocking DMA Abort API (no callback) */
+    if (hspi->hdmarx != NULL)
+    {
+      /* Set the SPI DMA Abort callback :
+      will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */
+      hspi->hdmarx->XferAbortCallback = NULL;
+
+      /* Abort DMA Rx Handle linked to SPI Peripheral */
+      if (HAL_DMA_Abort(hspi->hdmarx) != HAL_OK)
+      {
+        hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+      }
+
+      /* Disable peripheral */
+      __HAL_SPI_DISABLE(hspi);
+
+      /* Control the BSY flag */
+      if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+      {
+        hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+      }
+
+      /* Empty the FRLVL fifo */
+      if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+      {
+        hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+      }
+
+      /* Disable Rx DMA Request */
+      CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXDMAEN));
+    }
+  }
+  /* Reset Tx and Rx transfer counters */
+  hspi->RxXferCount = 0U;
+  hspi->TxXferCount = 0U;
+
+  /* Check error during Abort procedure */
+  if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT)
+  {
+    /* return HAL_Error in case of error during Abort procedure */
+    errorcode = HAL_ERROR;
+  }
+  else
+  {
+    /* Reset errorCode */
+    hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+  }
+
+  /* Clear the Error flags in the SR register */
+  __HAL_SPI_CLEAR_OVRFLAG(hspi);
+  __HAL_SPI_CLEAR_FREFLAG(hspi);
+
+  /* Restore hspi->state to ready */
+  hspi->State = HAL_SPI_STATE_READY;
+
+  return errorcode;
+}
+
+/**
+  * @brief  Abort ongoing transfer (Interrupt mode).
+  * @param  hspi SPI handle.
+  * @note   This procedure could be used for aborting any ongoing transfer (Tx and Rx),
+  *         started in Interrupt or DMA mode.
+  *         This procedure performs following operations :
+  *           - Disable SPI Interrupts (depending of transfer direction)
+  *           - Disable the DMA transfer in the peripheral register (if enabled)
+  *           - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
+  *           - Set handle State to READY
+  *           - At abort completion, call user abort complete callback
+  * @note   This procedure is executed in Interrupt mode, meaning that abort procedure could be
+  *         considered as completed only when user abort complete callback is executed (not when exiting function).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi)
+{
+  HAL_StatusTypeDef errorcode;
+  uint32_t abortcplt ;
+  __IO uint32_t count;
+  __IO uint32_t resetcount;
+
+  /* Initialized local variable  */
+  errorcode = HAL_OK;
+  abortcplt = 1U;
+  resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U);
+  count = resetcount;
+
+  /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE);
+
+  /* Change Rx and Tx Irq Handler to Disable TXEIE, RXNEIE and ERRIE interrupts */
+  if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE))
+  {
+    hspi->TxISR = SPI_AbortTx_ISR;
+    /* Wait HAL_SPI_STATE_ABORT state */
+    do
+    {
+      if (count == 0U)
+      {
+        SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+        break;
+      }
+      count--;
+    } while (hspi->State != HAL_SPI_STATE_ABORT);
+    /* Reset Timeout Counter */
+    count = resetcount;
+  }
+
+  if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE))
+  {
+    hspi->RxISR = SPI_AbortRx_ISR;
+    /* Wait HAL_SPI_STATE_ABORT state */
+    do
+    {
+      if (count == 0U)
+      {
+        SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+        break;
+      }
+      count--;
+    } while (hspi->State != HAL_SPI_STATE_ABORT);
+    /* Reset Timeout Counter */
+    count = resetcount;
+  }
+
+  /* If DMA Tx and/or DMA Rx Handles are associated to SPI Handle, DMA Abort complete callbacks should be initialised
+     before any call to DMA Abort functions */
+  /* DMA Tx Handle is valid */
+  if (hspi->hdmatx != NULL)
+  {
+    /* Set DMA Abort Complete callback if UART DMA Tx request if enabled.
+       Otherwise, set it to NULL */
+    if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN))
+    {
+      hspi->hdmatx->XferAbortCallback = SPI_DMATxAbortCallback;
+    }
+    else
+    {
+      hspi->hdmatx->XferAbortCallback = NULL;
+    }
+  }
+  /* DMA Rx Handle is valid */
+  if (hspi->hdmarx != NULL)
+  {
+    /* Set DMA Abort Complete callback if UART DMA Rx request if enabled.
+       Otherwise, set it to NULL */
+    if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN))
+    {
+      hspi->hdmarx->XferAbortCallback = SPI_DMARxAbortCallback;
+    }
+    else
+    {
+      hspi->hdmarx->XferAbortCallback = NULL;
+    }
+  }
+
+  /* Disable the SPI DMA Tx request if enabled */
+  if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN))
+  {
+    /* Abort the SPI DMA Tx Stream/Channel */
+    if (hspi->hdmatx != NULL)
+    {
+      /* Abort DMA Tx Handle linked to SPI Peripheral */
+      if (HAL_DMA_Abort_IT(hspi->hdmatx) != HAL_OK)
+      {
+        hspi->hdmatx->XferAbortCallback = NULL;
+        hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+      }
+      else
+      {
+        abortcplt = 0U;
+      }
+    }
+  }
+  /* Disable the SPI DMA Rx request if enabled */
+  if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN))
+  {
+    /* Abort the SPI DMA Rx Stream/Channel */
+    if (hspi->hdmarx != NULL)
+    {
+      /* Abort DMA Rx Handle linked to SPI Peripheral */
+      if (HAL_DMA_Abort_IT(hspi->hdmarx) !=  HAL_OK)
+      {
+        hspi->hdmarx->XferAbortCallback = NULL;
+        hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+      }
+      else
+      {
+        abortcplt = 0U;
+      }
+    }
+  }
+
+  if (abortcplt == 1U)
+  {
+    /* Reset Tx and Rx transfer counters */
+    hspi->RxXferCount = 0U;
+    hspi->TxXferCount = 0U;
+
+    /* Check error during Abort procedure */
+    if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT)
+    {
+      /* return HAL_Error in case of error during Abort procedure */
+      errorcode = HAL_ERROR;
+    }
+    else
+    {
+      /* Reset errorCode */
+      hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+    }
+
+    /* Clear the Error flags in the SR register */
+    __HAL_SPI_CLEAR_OVRFLAG(hspi);
+    __HAL_SPI_CLEAR_FREFLAG(hspi);
+
+    /* Restore hspi->State to Ready */
+    hspi->State = HAL_SPI_STATE_READY;
+
+    /* As no DMA to be aborted, call directly user Abort complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+    hspi->AbortCpltCallback(hspi);
+#else
+    HAL_SPI_AbortCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+  }
+
+  return errorcode;
+}
+
+/**
+  * @brief  Pause the DMA Transfer.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi)
+{
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  /* Disable the SPI DMA Tx & Rx requests */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Resume the DMA Transfer.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi)
+{
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  /* Enable the SPI DMA Tx & Rx requests */
+  SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop the DMA Transfer.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi)
+{
+  HAL_StatusTypeDef errorcode = HAL_OK;
+  /* The Lock is not implemented on this API to allow the user application
+     to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback():
+     when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+     and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback()
+     */
+
+  /* Abort the SPI DMA tx Stream/Channel  */
+  if (hspi->hdmatx != NULL)
+  {
+    if (HAL_OK != HAL_DMA_Abort(hspi->hdmatx))
+    {
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+      errorcode = HAL_ERROR;
+    }
+  }
+  /* Abort the SPI DMA rx Stream/Channel  */
+  if (hspi->hdmarx != NULL)
+  {
+    if (HAL_OK != HAL_DMA_Abort(hspi->hdmarx))
+    {
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+      errorcode = HAL_ERROR;
+    }
+  }
+
+  /* Disable the SPI DMA Tx & Rx requests */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+  hspi->State = HAL_SPI_STATE_READY;
+  return errorcode;
+}
+
+/**
+  * @brief  Handle SPI interrupt request.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for the specified SPI module.
+  * @retval None
+  */
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi)
+{
+  uint32_t itsource = hspi->Instance->CR2;
+  uint32_t itflag   = hspi->Instance->SR;
+
+  /* SPI in mode Receiver ----------------------------------------------------*/
+  if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) == RESET) &&
+      (SPI_CHECK_FLAG(itflag, SPI_FLAG_RXNE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_RXNE) != RESET))
+  {
+    hspi->RxISR(hspi);
+    return;
+  }
+
+  /* SPI in mode Transmitter -------------------------------------------------*/
+  if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_TXE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_TXE) != RESET))
+  {
+    hspi->TxISR(hspi);
+    return;
+  }
+
+  /* SPI in Error Treatment --------------------------------------------------*/
+  if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET)
+       || (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET))
+  {
+    /* SPI Overrun error interrupt occurred ----------------------------------*/
+    if (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET)
+    {
+      if (hspi->State != HAL_SPI_STATE_BUSY_TX)
+      {
+        SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR);
+        __HAL_SPI_CLEAR_OVRFLAG(hspi);
+      }
+      else
+      {
+        __HAL_SPI_CLEAR_OVRFLAG(hspi);
+        return;
+      }
+    }
+
+    /* SPI Mode Fault error interrupt occurred -------------------------------*/
+    if (SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET)
+    {
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF);
+      __HAL_SPI_CLEAR_MODFFLAG(hspi);
+    }
+
+    /* SPI Frame error interrupt occurred ------------------------------------*/
+    if (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)
+    {
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE);
+      __HAL_SPI_CLEAR_FREFLAG(hspi);
+    }
+
+    if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+    {
+      /* Disable all interrupts */
+      __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR);
+
+      hspi->State = HAL_SPI_STATE_READY;
+      /* Disable the SPI DMA requests if enabled */
+      if ((HAL_IS_BIT_SET(itsource, SPI_CR2_TXDMAEN)) || (HAL_IS_BIT_SET(itsource, SPI_CR2_RXDMAEN)))
+      {
+        CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN));
+
+        /* Abort the SPI DMA Rx channel */
+        if (hspi->hdmarx != NULL)
+        {
+          /* Set the SPI DMA Abort callback :
+          will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */
+          hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError;
+          if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmarx))
+          {
+            SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+          }
+        }
+        /* Abort the SPI DMA Tx channel */
+        if (hspi->hdmatx != NULL)
+        {
+          /* Set the SPI DMA Abort callback :
+          will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */
+          hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError;
+          if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmatx))
+          {
+            SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+          }
+        }
+      }
+      else
+      {
+        /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+        hspi->ErrorCallback(hspi);
+#else
+        HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+      }
+    }
+    return;
+  }
+}
+
+/**
+  * @brief  Tx Transfer completed callback.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_TxCpltCallback should be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Transfer completed callback.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_RxCpltCallback should be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tx and Rx Transfer completed callback.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_TxRxCpltCallback should be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tx Half Transfer completed callback.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_TxHalfCpltCallback should be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Half Transfer completed callback.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tx and Rx Half Transfer callback.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file
+   */
+}
+
+/**
+  * @brief  SPI error callback.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_ErrorCallback should be implemented in the user file
+   */
+  /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes
+            and user can use HAL_SPI_GetError() API to check the latest error occurred
+   */
+}
+
+/**
+  * @brief  SPI Abort Complete callback.
+  * @param  hspi SPI handle.
+  * @retval None
+  */
+__weak void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_AbortCpltCallback can be implemented in the user file.
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions
+  * @brief   SPI control functions
+  *
+@verbatim
+ ===============================================================================
+                      ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the SPI.
+     (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral
+     (+) HAL_SPI_GetError() check in run-time Errors occurring during communication
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the SPI handle state.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval SPI state
+  */
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi)
+{
+  /* Return SPI handle state */
+  return hspi->State;
+}
+
+/**
+  * @brief  Return the SPI error code.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval SPI error code in bitmap format
+  */
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi)
+{
+  /* Return SPI ErrorCode */
+  return hspi->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup SPI_Private_Functions
+  * @brief   Private functions
+  * @{
+  */
+
+/**
+  * @brief  DMA SPI transmit process complete callback.
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+  uint32_t tickstart;
+
+  /* Init tickstart for timeout management*/
+  tickstart = HAL_GetTick();
+
+  /* DMA Normal Mode */
+  if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC)
+  {
+    /* Disable ERR interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR);
+
+    /* Disable Tx DMA Request */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+    /* Check the end of the transaction */
+    if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+    {
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+    }
+
+    /* Clear overrun flag in 2 Lines communication mode because received data is not read */
+    if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+    {
+      __HAL_SPI_CLEAR_OVRFLAG(hspi);
+    }
+
+    hspi->TxXferCount = 0U;
+    hspi->State = HAL_SPI_STATE_READY;
+
+    if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+    {
+      /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+      hspi->ErrorCallback(hspi);
+#else
+      HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+      return;
+    }
+  }
+  /* Call user Tx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  hspi->TxCpltCallback(hspi);
+#else
+  HAL_SPI_TxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  DMA SPI receive process complete callback.
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+  uint32_t tickstart;
+#if (USE_SPI_CRC != 0U)
+  __IO uint32_t tmpreg = 0U;
+  __IO uint8_t  * ptmpreg8;
+  __IO uint8_t  tmpreg8 = 0;
+#endif /* USE_SPI_CRC */
+
+  /* Init tickstart for timeout management*/
+  tickstart = HAL_GetTick();
+
+  /* DMA Normal Mode */
+  if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC)
+  {
+    /* Disable ERR interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR);
+
+#if (USE_SPI_CRC != 0U)
+    /* CRC handling */
+    if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      /* Wait until RXNE flag */
+      if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+      {
+        /* Error on the CRC reception */
+        SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+      }
+      /* Read CRC */
+      if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+      {
+        /* Read 16bit CRC */
+        tmpreg = READ_REG(hspi->Instance->DR);
+        /* To avoid GCC warning */
+        UNUSED(tmpreg);
+      }
+      else
+      {
+        /* Initialize the 8bit temporary pointer */
+        ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
+        /* Read 8bit CRC */
+        tmpreg8 = *ptmpreg8;
+        /* To avoid GCC warning */
+        UNUSED(tmpreg8);
+
+        if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
+        {
+          if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+          {
+            /* Error on the CRC reception */
+            SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+          }
+          /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */
+          tmpreg8 = *ptmpreg8;
+          /* To avoid GCC warning */
+          UNUSED(tmpreg8);
+        }
+      }
+    }
+#endif /* USE_SPI_CRC */
+
+    /* Check if we are in Master RX 2 line mode */
+    if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER))
+    {
+      /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */
+      CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+    }
+    else
+    {
+      /* Normal case */
+      CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+    }
+
+    /* Check the end of the transaction */
+    if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+    {
+      hspi->ErrorCode = HAL_SPI_ERROR_FLAG;
+    }
+
+    hspi->RxXferCount = 0U;
+    hspi->State = HAL_SPI_STATE_READY;
+
+#if (USE_SPI_CRC != 0U)
+    /* Check if CRC error occurred */
+    if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR))
+    {
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+      __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+    }
+#endif /* USE_SPI_CRC */
+
+    if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+    {
+      /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+      hspi->ErrorCallback(hspi);
+#else
+      HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+      return;
+    }
+  }
+  /* Call user Rx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  hspi->RxCpltCallback(hspi);
+#else
+  HAL_SPI_RxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  DMA SPI transmit receive process complete callback.
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+  uint32_t tickstart;
+#if (USE_SPI_CRC != 0U)
+  __IO uint32_t tmpreg = 0U;
+  __IO uint8_t  * ptmpreg8;
+  __IO uint8_t  tmpreg8 = 0;
+#endif /* USE_SPI_CRC */
+
+  /* Init tickstart for timeout management*/
+  tickstart = HAL_GetTick();
+
+  /* DMA Normal Mode */
+  if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC)
+  {
+    /* Disable ERR interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR);
+
+#if (USE_SPI_CRC != 0U)
+    /* CRC handling */
+    if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_8BIT))
+      {
+        if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_QUARTER_FULL, SPI_DEFAULT_TIMEOUT,
+                                          tickstart) != HAL_OK)
+        {
+          /* Error on the CRC reception */
+          SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+        }
+        /* Initialize the 8bit temporary pointer */
+        ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
+        /* Read 8bit CRC */
+        tmpreg8 = *ptmpreg8;
+        /* To avoid GCC warning */
+        UNUSED(tmpreg8);
+      }
+      else
+      {
+        if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_HALF_FULL, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+        {
+          /* Error on the CRC reception */
+          SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+        }
+        /* Read CRC to Flush DR and RXNE flag */
+        tmpreg = READ_REG(hspi->Instance->DR);
+        /* To avoid GCC warning */
+        UNUSED(tmpreg);
+      }
+    }
+#endif /* USE_SPI_CRC */
+
+    /* Check the end of the transaction */
+    if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+    {
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+    }
+
+    /* Disable Rx/Tx DMA Request */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+    hspi->TxXferCount = 0U;
+    hspi->RxXferCount = 0U;
+    hspi->State = HAL_SPI_STATE_READY;
+
+#if (USE_SPI_CRC != 0U)
+    /* Check if CRC error occurred */
+    if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR))
+    {
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+      __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+    }
+#endif /* USE_SPI_CRC */
+
+    if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+    {
+      /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+      hspi->ErrorCallback(hspi);
+#else
+      HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+      return;
+    }
+  }
+  /* Call user TxRx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  hspi->TxRxCpltCallback(hspi);
+#else
+  HAL_SPI_TxRxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  DMA SPI half transmit process complete callback.
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+  /* Call user Tx half complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  hspi->TxHalfCpltCallback(hspi);
+#else
+  HAL_SPI_TxHalfCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  DMA SPI half receive process complete callback
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+  /* Call user Rx half complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  hspi->RxHalfCpltCallback(hspi);
+#else
+  HAL_SPI_RxHalfCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  DMA SPI half transmit receive process complete callback.
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+  /* Call user TxRx half complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  hspi->TxRxHalfCpltCallback(hspi);
+#else
+  HAL_SPI_TxRxHalfCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  DMA SPI communication error callback.
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAError(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+  /* Stop the disable DMA transfer on SPI side */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+  SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+  hspi->State = HAL_SPI_STATE_READY;
+  /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  hspi->ErrorCallback(hspi);
+#else
+  HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  DMA SPI communication abort callback, when initiated by HAL services on Error
+  *         (To be called at end of DMA Abort procedure following error occurrence).
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+  hspi->RxXferCount = 0U;
+  hspi->TxXferCount = 0U;
+
+  /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  hspi->ErrorCallback(hspi);
+#else
+  HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  DMA SPI Tx communication abort callback, when initiated by user
+  *         (To be called at end of DMA Tx Abort procedure following user abort request).
+  * @note   When this callback is executed, User Abort complete call back is called only if no
+  *         Abort still ongoing for Rx DMA Handle.
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+  hspi->hdmatx->XferAbortCallback = NULL;
+
+  /* Disable Tx DMA Request */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+  if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+  {
+    hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+  }
+
+  /* Disable SPI Peripheral */
+  __HAL_SPI_DISABLE(hspi);
+
+  /* Empty the FRLVL fifo */
+  if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+  {
+    hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+  }
+
+  /* Check if an Abort process is still ongoing */
+  if (hspi->hdmarx != NULL)
+  {
+    if (hspi->hdmarx->XferAbortCallback != NULL)
+    {
+      return;
+    }
+  }
+
+  /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */
+  hspi->RxXferCount = 0U;
+  hspi->TxXferCount = 0U;
+
+  /* Check no error during Abort procedure */
+  if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT)
+  {
+    /* Reset errorCode */
+    hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+  }
+
+  /* Clear the Error flags in the SR register */
+  __HAL_SPI_CLEAR_OVRFLAG(hspi);
+  __HAL_SPI_CLEAR_FREFLAG(hspi);
+
+  /* Restore hspi->State to Ready */
+  hspi->State  = HAL_SPI_STATE_READY;
+
+  /* Call user Abort complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  hspi->AbortCpltCallback(hspi);
+#else
+  HAL_SPI_AbortCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  DMA SPI Rx communication abort callback, when initiated by user
+  *         (To be called at end of DMA Rx Abort procedure following user abort request).
+  * @note   When this callback is executed, User Abort complete call back is called only if no
+  *         Abort still ongoing for Tx DMA Handle.
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+  /* Disable SPI Peripheral */
+  __HAL_SPI_DISABLE(hspi);
+
+  hspi->hdmarx->XferAbortCallback = NULL;
+
+  /* Disable Rx DMA Request */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+  /* Control the BSY flag */
+  if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+  {
+    hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+  }
+
+  /* Empty the FRLVL fifo */
+  if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+  {
+    hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+  }
+
+  /* Check if an Abort process is still ongoing */
+  if (hspi->hdmatx != NULL)
+  {
+    if (hspi->hdmatx->XferAbortCallback != NULL)
+    {
+      return;
+    }
+  }
+
+  /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */
+  hspi->RxXferCount = 0U;
+  hspi->TxXferCount = 0U;
+
+  /* Check no error during Abort procedure */
+  if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT)
+  {
+    /* Reset errorCode */
+    hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+  }
+
+  /* Clear the Error flags in the SR register */
+  __HAL_SPI_CLEAR_OVRFLAG(hspi);
+  __HAL_SPI_CLEAR_FREFLAG(hspi);
+
+  /* Restore hspi->State to Ready */
+  hspi->State  = HAL_SPI_STATE_READY;
+
+  /* Call user Abort complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+  hspi->AbortCpltCallback(hspi);
+#else
+  HAL_SPI_AbortCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  Rx 8-bit handler for Transmit and Receive in Interrupt mode.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  /* Receive data in packing mode */
+  if (hspi->RxXferCount > 1U)
+  {
+    *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR);
+    hspi->pRxBuffPtr += sizeof(uint16_t);
+    hspi->RxXferCount -= 2U;
+    if (hspi->RxXferCount == 1U)
+    {
+      /* Set RX Fifo threshold according the reception data length: 8bit */
+      SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+    }
+  }
+  /* Receive data in 8 Bit mode */
+  else
+  {
+    *hspi->pRxBuffPtr = *((__IO uint8_t *)&hspi->Instance->DR);
+    hspi->pRxBuffPtr++;
+    hspi->RxXferCount--;
+  }
+
+  /* Check end of the reception */
+  if (hspi->RxXferCount == 0U)
+  {
+#if (USE_SPI_CRC != 0U)
+    if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+      hspi->RxISR =  SPI_2linesRxISR_8BITCRC;
+      return;
+    }
+#endif /* USE_SPI_CRC */
+
+    /* Disable RXNE  and ERR interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+    if (hspi->TxXferCount == 0U)
+    {
+      SPI_CloseRxTx_ISR(hspi);
+    }
+  }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+  * @brief  Rx 8-bit handler for Transmit and Receive in Interrupt mode.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+  __IO uint8_t  * ptmpreg8;
+  __IO uint8_t  tmpreg8 = 0;
+
+  /* Initialize the 8bit temporary pointer */
+  ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
+  /* Read 8bit CRC to flush Data Register */
+  tmpreg8 = *ptmpreg8;
+  /* To avoid GCC warning */
+  UNUSED(tmpreg8);
+
+  hspi->CRCSize--;
+
+  /* Check end of the reception */
+  if (hspi->CRCSize == 0U)
+  {
+    /* Disable RXNE and ERR interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+    if (hspi->TxXferCount == 0U)
+    {
+      SPI_CloseRxTx_ISR(hspi);
+    }
+  }
+}
+#endif /* USE_SPI_CRC */
+
+/**
+  * @brief  Tx 8-bit handler for Transmit and Receive in Interrupt mode.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  /* Transmit data in packing Bit mode */
+  if (hspi->TxXferCount >= 2U)
+  {
+    hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+    hspi->pTxBuffPtr += sizeof(uint16_t);
+    hspi->TxXferCount -= 2U;
+  }
+  /* Transmit data in 8 Bit mode */
+  else
+  {
+    *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr);
+    hspi->pTxBuffPtr++;
+    hspi->TxXferCount--;
+  }
+
+  /* Check the end of the transmission */
+  if (hspi->TxXferCount == 0U)
+  {
+#if (USE_SPI_CRC != 0U)
+    if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      /* Set CRC Next Bit to send CRC */
+      SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+      /* Disable TXE interrupt */
+      __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+      return;
+    }
+#endif /* USE_SPI_CRC */
+
+    /* Disable TXE interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+
+    if (hspi->RxXferCount == 0U)
+    {
+      SPI_CloseRxTx_ISR(hspi);
+    }
+  }
+}
+
+/**
+  * @brief  Rx 16-bit handler for Transmit and Receive in Interrupt mode.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  /* Receive data in 16 Bit mode */
+  *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR);
+  hspi->pRxBuffPtr += sizeof(uint16_t);
+  hspi->RxXferCount--;
+
+  if (hspi->RxXferCount == 0U)
+  {
+#if (USE_SPI_CRC != 0U)
+    if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      hspi->RxISR =  SPI_2linesRxISR_16BITCRC;
+      return;
+    }
+#endif /* USE_SPI_CRC */
+
+    /* Disable RXNE interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+    if (hspi->TxXferCount == 0U)
+    {
+      SPI_CloseRxTx_ISR(hspi);
+    }
+  }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+  * @brief  Manage the CRC 16-bit receive for Transmit and Receive in Interrupt mode.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+  __IO uint32_t tmpreg = 0U;
+
+  /* Read 16bit CRC to flush Data Register */
+  tmpreg = READ_REG(hspi->Instance->DR);
+  /* To avoid GCC warning */
+  UNUSED(tmpreg);  
+
+  /* Disable RXNE interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+  SPI_CloseRxTx_ISR(hspi);
+}
+#endif /* USE_SPI_CRC */
+
+/**
+  * @brief  Tx 16-bit handler for Transmit and Receive in Interrupt mode.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  /* Transmit data in 16 Bit mode */
+  hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+  hspi->pTxBuffPtr += sizeof(uint16_t);
+  hspi->TxXferCount--;
+
+  /* Enable CRC Transmission */
+  if (hspi->TxXferCount == 0U)
+  {
+#if (USE_SPI_CRC != 0U)
+    if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      /* Set CRC Next Bit to send CRC */
+      SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+      /* Disable TXE interrupt */
+      __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+      return;
+    }
+#endif /* USE_SPI_CRC */
+
+    /* Disable TXE interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+
+    if (hspi->RxXferCount == 0U)
+    {
+      SPI_CloseRxTx_ISR(hspi);
+    }
+  }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+  * @brief  Manage the CRC 8-bit receive in Interrupt context.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+  __IO uint8_t  * ptmpreg8;
+  __IO uint8_t  tmpreg8 = 0;
+
+  /* Initialize the 8bit temporary pointer */
+  ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
+  /* Read 8bit CRC to flush Data Register */
+  tmpreg8 = *ptmpreg8;
+  /* To avoid GCC warning */
+  UNUSED(tmpreg8);
+
+  hspi->CRCSize--;
+
+  if (hspi->CRCSize == 0U)
+  {
+    SPI_CloseRx_ISR(hspi);
+  }
+}
+#endif /* USE_SPI_CRC */
+
+/**
+  * @brief  Manage the receive 8-bit in Interrupt context.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  *hspi->pRxBuffPtr = (*(__IO uint8_t *)&hspi->Instance->DR);
+  hspi->pRxBuffPtr++;
+  hspi->RxXferCount--;
+
+#if (USE_SPI_CRC != 0U)
+  /* Enable CRC Transmission */
+  if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+  {
+    SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+  }
+#endif /* USE_SPI_CRC */
+
+  if (hspi->RxXferCount == 0U)
+  {
+#if (USE_SPI_CRC != 0U)
+    if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      hspi->RxISR =  SPI_RxISR_8BITCRC;
+      return;
+    }
+#endif /* USE_SPI_CRC */
+    SPI_CloseRx_ISR(hspi);
+  }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+  * @brief  Manage the CRC 16-bit receive in Interrupt context.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+  __IO uint32_t tmpreg = 0U;
+
+  /* Read 16bit CRC to flush Data Register */
+  tmpreg = READ_REG(hspi->Instance->DR);
+  /* To avoid GCC warning */
+  UNUSED(tmpreg);
+
+  /* Disable RXNE and ERR interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+  SPI_CloseRx_ISR(hspi);
+}
+#endif /* USE_SPI_CRC */
+
+/**
+  * @brief  Manage the 16-bit receive in Interrupt context.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR);
+  hspi->pRxBuffPtr += sizeof(uint16_t);
+  hspi->RxXferCount--;
+
+#if (USE_SPI_CRC != 0U)
+  /* Enable CRC Transmission */
+  if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+  {
+    SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+  }
+#endif /* USE_SPI_CRC */
+
+  if (hspi->RxXferCount == 0U)
+  {
+#if (USE_SPI_CRC != 0U)
+    if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      hspi->RxISR = SPI_RxISR_16BITCRC;
+      return;
+    }
+#endif /* USE_SPI_CRC */
+    SPI_CloseRx_ISR(hspi);
+  }
+}
+
+/**
+  * @brief  Handle the data 8-bit transmit in Interrupt mode.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr);
+  hspi->pTxBuffPtr++;
+  hspi->TxXferCount--;
+
+  if (hspi->TxXferCount == 0U)
+  {
+#if (USE_SPI_CRC != 0U)
+    if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      /* Enable CRC Transmission */
+      SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+    }
+#endif /* USE_SPI_CRC */
+    SPI_CloseTx_ISR(hspi);
+  }
+}
+
+/**
+  * @brief  Handle the data 16-bit transmit in Interrupt mode.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  /* Transmit data in 16 Bit mode */
+  hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+  hspi->pTxBuffPtr += sizeof(uint16_t);
+  hspi->TxXferCount--;
+
+  if (hspi->TxXferCount == 0U)
+  {
+#if (USE_SPI_CRC != 0U)
+    if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      /* Enable CRC Transmission */
+      SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+    }
+#endif /* USE_SPI_CRC */
+    SPI_CloseTx_ISR(hspi);
+  }
+}
+
+/**
+  * @brief  Handle SPI Communication Timeout.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *              the configuration information for SPI module.
+  * @param  Flag SPI flag to check
+  * @param  State flag state to check
+  * @param  Timeout Timeout duration
+  * @param  Tickstart tick start value
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State,
+                                                       uint32_t Timeout, uint32_t Tickstart)
+{
+  __IO uint32_t count;
+  uint32_t tmp_timeout;
+  uint32_t tmp_tickstart;
+
+  /* Adjust Timeout value  in case of end of transfer */
+  tmp_timeout   = Timeout - (HAL_GetTick() - Tickstart);
+  tmp_tickstart = HAL_GetTick();
+
+  /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */
+  count = tmp_timeout * ((SystemCoreClock * 32U) >> 20U);
+
+  while ((__HAL_SPI_GET_FLAG(hspi, Flag) ? SET : RESET) != State)
+  {
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U))
+      {
+        /* Disable the SPI and reset the CRC: the CRC value should be cleared
+           on both master and slave sides in order to resynchronize the master
+           and slave for their respective CRC calculation */
+
+        /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+        __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+        if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE)
+                                                     || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+        {
+          /* Disable SPI peripheral */
+          __HAL_SPI_DISABLE(hspi);
+        }
+
+        /* Reset CRC Calculation */
+        if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+        {
+          SPI_RESET_CRC(hspi);
+        }
+
+        hspi->State = HAL_SPI_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hspi);
+
+        return HAL_TIMEOUT;
+      }
+      /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */
+      if(count == 0U)
+      {
+        tmp_timeout = 0U;
+      }
+      count--;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle SPI FIFO Communication Timeout.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *              the configuration information for SPI module.
+  * @param  Fifo Fifo to check
+  * @param  State Fifo state to check
+  * @param  Timeout Timeout duration
+  * @param  Tickstart tick start value
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State,
+                                                       uint32_t Timeout, uint32_t Tickstart)
+{
+  __IO uint32_t count;
+  uint32_t tmp_timeout;
+  uint32_t tmp_tickstart;
+  __IO uint8_t  * ptmpreg8;
+  __IO uint8_t  tmpreg8 = 0;
+
+  /* Adjust Timeout value  in case of end of transfer */
+  tmp_timeout = Timeout - (HAL_GetTick() - Tickstart);
+  tmp_tickstart = HAL_GetTick();
+
+  /* Initialize the 8bit temporary pointer */
+  ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
+
+  /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */
+  count = tmp_timeout * ((SystemCoreClock * 35U) >> 20U);
+
+  while ((hspi->Instance->SR & Fifo) != State)
+  {
+    if ((Fifo == SPI_SR_FRLVL) && (State == SPI_FRLVL_EMPTY))
+    {
+      /* Flush Data Register by a blank read */
+      tmpreg8 = *ptmpreg8;
+      /* To avoid GCC warning */
+      UNUSED(tmpreg8);
+    }
+
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U))
+      {
+        /* Disable the SPI and reset the CRC: the CRC value should be cleared
+           on both master and slave sides in order to resynchronize the master
+           and slave for their respective CRC calculation */
+
+        /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+        __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+        if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE)
+                                                     || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+        {
+          /* Disable SPI peripheral */
+          __HAL_SPI_DISABLE(hspi);
+        }
+
+        /* Reset CRC Calculation */
+        if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+        {
+          SPI_RESET_CRC(hspi);
+        }
+
+        hspi->State = HAL_SPI_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hspi);
+
+        return HAL_TIMEOUT;
+      }
+      /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */
+      if(count == 0U)
+      {
+        tmp_timeout = 0U;
+      }      
+      count--;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle the check of the RX transaction complete.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  Timeout Timeout duration
+  * @param  Tickstart tick start value
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi,  uint32_t Timeout, uint32_t Tickstart)
+{
+  if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE)
+                                               || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+  {
+    /* Disable SPI peripheral */
+    __HAL_SPI_DISABLE(hspi);
+  }
+
+  /* Control the BSY flag */
+  if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK)
+  {
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+    return HAL_TIMEOUT;
+  }
+
+  if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE)
+                                               || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+  {
+    /* Empty the FRLVL fifo */
+    if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK)
+    {
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle the check of the RXTX or TX transaction complete.
+  * @param  hspi SPI handle
+  * @param  Timeout Timeout duration
+  * @param  Tickstart tick start value
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart)
+{
+  /* Control if the TX fifo is empty */
+  if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FTLVL, SPI_FTLVL_EMPTY, Timeout, Tickstart) != HAL_OK)
+  {
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+    return HAL_TIMEOUT;
+  }
+
+  /* Control the BSY flag */
+  if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK)
+  {
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+    return HAL_TIMEOUT;
+  }
+
+  /* Control if the RX fifo is empty */
+  if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK)
+  {
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+    return HAL_TIMEOUT;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle the end of the RXTX transaction.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi)
+{
+  uint32_t tickstart;
+
+  /* Init tickstart for timeout management */
+  tickstart = HAL_GetTick();
+
+  /* Disable ERR interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR);
+
+  /* Check the end of the transaction */
+  if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+  {
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+  }
+
+#if (USE_SPI_CRC != 0U)
+  /* Check if CRC error occurred */
+  if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+  {
+    hspi->State = HAL_SPI_STATE_READY;
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+    __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+    /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+    hspi->ErrorCallback(hspi);
+#else
+    HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+  }
+  else
+  {
+#endif /* USE_SPI_CRC */
+    if (hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+    {
+      if (hspi->State == HAL_SPI_STATE_BUSY_RX)
+      {
+        hspi->State = HAL_SPI_STATE_READY;
+        /* Call user Rx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+        hspi->RxCpltCallback(hspi);
+#else
+        HAL_SPI_RxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+      }
+      else
+      {
+        hspi->State = HAL_SPI_STATE_READY;
+        /* Call user TxRx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+        hspi->TxRxCpltCallback(hspi);
+#else
+        HAL_SPI_TxRxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+      }
+    }
+    else
+    {
+      hspi->State = HAL_SPI_STATE_READY;
+      /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+      hspi->ErrorCallback(hspi);
+#else
+      HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+    }
+#if (USE_SPI_CRC != 0U)
+  }
+#endif /* USE_SPI_CRC */
+}
+
+/**
+  * @brief  Handle the end of the RX transaction.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi)
+{
+  /* Disable RXNE and ERR interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+  /* Check the end of the transaction */
+  if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+  {
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+  }
+  hspi->State = HAL_SPI_STATE_READY;
+
+#if (USE_SPI_CRC != 0U)
+  /* Check if CRC error occurred */
+  if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+  {
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+    __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+    /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+    hspi->ErrorCallback(hspi);
+#else
+    HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+  }
+  else
+  {
+#endif /* USE_SPI_CRC */
+    if (hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+    {
+      /* Call user Rx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+      hspi->RxCpltCallback(hspi);
+#else
+      HAL_SPI_RxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+    }
+    else
+    {
+      /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+      hspi->ErrorCallback(hspi);
+#else
+      HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+    }
+#if (USE_SPI_CRC != 0U)
+  }
+#endif /* USE_SPI_CRC */
+}
+
+/**
+  * @brief  Handle the end of the TX transaction.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi)
+{
+  uint32_t tickstart;
+
+  /* Init tickstart for timeout management*/
+  tickstart = HAL_GetTick();
+
+  /* Disable TXE and ERR interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+
+  /* Check the end of the transaction */
+  if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+  {
+    SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+  }
+
+  /* Clear overrun flag in 2 Lines communication mode because received is not read */
+  if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+  {
+    __HAL_SPI_CLEAR_OVRFLAG(hspi);
+  }
+
+  hspi->State = HAL_SPI_STATE_READY;
+  if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+  {
+    /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+    hspi->ErrorCallback(hspi);
+#else
+    HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+  }
+  else
+  {
+    /* Call user Rx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+    hspi->TxCpltCallback(hspi);
+#else
+    HAL_SPI_TxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+  }
+}
+
+/**
+  * @brief  Handle abort a Rx transaction.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi)
+{
+  __IO uint32_t count;
+
+  /* Disable SPI Peripheral */
+  __HAL_SPI_DISABLE(hspi);
+
+  count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U);
+
+  /* Disable RXNEIE interrupt */
+  CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE));
+
+  /* Check RXNEIE is disabled */
+  do
+  {
+    if (count == 0U)
+    {
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+      break;
+    }
+    count--;
+  } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE));
+
+  /* Control the BSY flag */
+  if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+  {
+    hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+  }
+
+  /* Empty the FRLVL fifo */
+  if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+  {
+    hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+  }
+
+  hspi->State = HAL_SPI_STATE_ABORT;
+}
+
+/**
+  * @brief  Handle abort a Tx or Rx/Tx transaction.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi)
+{
+  __IO uint32_t count;
+
+  count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U);
+
+  /* Disable TXEIE interrupt */
+  CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE));
+
+  /* Check TXEIE is disabled */
+  do
+  {
+    if (count == 0U)
+    {
+      SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+      break;
+    }
+    count--;
+  } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE));
+
+  if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+  {
+    hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+  }
+
+  /* Disable SPI Peripheral */
+  __HAL_SPI_DISABLE(hspi);
+
+  /* Empty the FRLVL fifo */
+  if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+  {
+    hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+  }
+
+  /* Check case of Full-Duplex Mode and disable directly RXNEIE interrupt */
+  if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE))
+  {
+    /* Disable RXNEIE interrupt */
+    CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE));
+
+    /* Check RXNEIE is disabled */
+    do
+    {
+      if (count == 0U)
+      {
+        SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+        break;
+      }
+      count--;
+    } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE));
+
+    /* Control the BSY flag */
+    if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+    {
+      hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+    }
+
+    /* Empty the FRLVL fifo */
+    if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+    {
+      hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+    }
+  }
+  hspi->State = HAL_SPI_STATE_ABORT;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_spi_ex.c b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_spi_ex.c
new file mode 100644
index 00000000..fb884956
--- /dev/null
+++ b/nucleof072rb/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_spi_ex.c
@@ -0,0 +1,115 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_spi_ex.c
+  * @author  MCD Application Team
+  * @brief   Extended SPI HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          SPI peripheral extended functionalities :
+  *           + IO operation functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SPIEx SPIEx
+  * @brief SPI Extended HAL module driver
+  * @{
+  */
+#ifdef HAL_SPI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup SPIEx_Private_Constants SPIEx Private Constants
+  * @{
+  */
+#define SPI_FIFO_SIZE       4UL
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup SPIEx_Exported_Functions SPIEx Exported Functions
+  * @{
+  */
+
+/** @defgroup SPIEx_Exported_Functions_Group1 IO operation functions
+  *  @brief   Data transfers functions
+  *
+@verbatim
+  ==============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+ [..]
+    This subsection provides a set of extended functions to manage the SPI
+    data transfers.
+
+    (#) Rx data flush function:
+        (++) HAL_SPIEx_FlushRxFifo()
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Flush the RX fifo.
+  * @param  hspi pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(SPI_HandleTypeDef *hspi)
+{
+  __IO uint32_t tmpreg;
+  uint8_t  count = 0U;
+  while ((hspi->Instance->SR & SPI_FLAG_FRLVL) !=  SPI_FRLVL_EMPTY)
+  {
+    count++;
+    tmpreg = hspi->Instance->DR;
+    UNUSED(tmpreg); /* To avoid GCC warning */
+    if (count == SPI_FIFO_SIZE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/nucleof072rb/nucleof072rb.ioc b/nucleof072rb/nucleof072rb.ioc
index f849e237..d663c75a 100644
--- a/nucleof072rb/nucleof072rb.ioc
+++ b/nucleof072rb/nucleof072rb.ioc
@@ -8,23 +8,31 @@ Mcu.CPN=STM32F072RBT6
 Mcu.Family=STM32F0
 Mcu.IP0=NVIC
 Mcu.IP1=RCC
-Mcu.IP2=SYS
-Mcu.IP3=USART2
-Mcu.IPNb=4
+Mcu.IP2=SPI1
+Mcu.IP3=SYS
+Mcu.IP4=TIM1
+Mcu.IP5=USART2
+Mcu.IPNb=6
 Mcu.Name=STM32F072R(8-B)Tx
 Mcu.Package=LQFP64
 Mcu.Pin0=PC13
 Mcu.Pin1=PC14-OSC32_IN
-Mcu.Pin10=VP_SYS_VS_Systick
+Mcu.Pin10=PA8
+Mcu.Pin11=PA13
+Mcu.Pin12=PA14
+Mcu.Pin13=PB3
+Mcu.Pin14=PB8
+Mcu.Pin15=VP_SYS_VS_Systick
+Mcu.Pin16=VP_TIM1_VS_ClockSourceINT
 Mcu.Pin2=PC15-OSC32_OUT
 Mcu.Pin3=PF0-OSC_IN
 Mcu.Pin4=PF1-OSC_OUT
 Mcu.Pin5=PA2
 Mcu.Pin6=PA3
 Mcu.Pin7=PA5
-Mcu.Pin8=PA13
-Mcu.Pin9=PA14
-Mcu.PinsNb=11
+Mcu.Pin8=PA6
+Mcu.Pin9=PA7
+Mcu.PinsNb=17
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F072RBTx
@@ -69,6 +77,19 @@ PA5.GPIO_PuPd=GPIO_NOPULL
 PA5.GPIO_Speed=GPIO_SPEED_FREQ_LOW
 PA5.Locked=true
 PA5.Signal=GPIO_Output
+PA6.Locked=true
+PA6.Mode=Full_Duplex_Master
+PA6.Signal=SPI1_MISO
+PA7.Locked=true
+PA7.Mode=Full_Duplex_Master
+PA7.Signal=SPI1_MOSI
+PA8.Locked=true
+PA8.Signal=S_TIM1_CH1
+PB3.Locked=true
+PB3.Mode=Full_Duplex_Master
+PB3.Signal=SPI1_SCK
+PB8.Locked=true
+PB8.Signal=GPIO_Output
 PC13.GPIOParameters=GPIO_Label,GPIO_ModeDefaultEXTI
 PC13.GPIO_Label=B1 [Blue PushButton]
 PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_FALLING
@@ -116,7 +137,7 @@ ProjectManager.ToolChainLocation=
 ProjectManager.UAScriptAfterPath=
 ProjectManager.UAScriptBeforePath=
 ProjectManager.UnderRoot=true
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_SPI1_Init-SPI1-false-HAL-true
 RCC.AHBFreq_Value=48000000
 RCC.APB1Freq_Value=48000000
 RCC.APB1TimFreq_Value=48000000
@@ -141,11 +162,26 @@ RCC.USART1Freq_Value=48000000
 RCC.USART2Freq_Value=48000000
 SH.GPXTI13.0=GPIO_EXTI13
 SH.GPXTI13.ConfNb=1
+SH.S_TIM1_CH1.0=TIM1_CH1,PWM Generation1 CH1
+SH.S_TIM1_CH1.ConfNb=1
+SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_16
+SPI1.CalculateBaudRate=3.0 MBits/s
+SPI1.DataSize=SPI_DATASIZE_8BIT
+SPI1.Direction=SPI_DIRECTION_2LINES
+SPI1.IPParameters=VirtualType,Mode,Direction,BaudRatePrescaler,CalculateBaudRate,DataSize
+SPI1.Mode=SPI_MODE_MASTER
+SPI1.VirtualType=VM_MASTER
+TIM1.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
+TIM1.IPParameters=Channel-PWM Generation1 CH1,Prescaler,Period
+TIM1.Period=64000
+TIM1.Prescaler=15
 USART2.IPParameters=VirtualMode,VirtualMode-Asynchronous
 USART2.VirtualMode=VM_ASYNC
 USART2.VirtualMode-Asynchronous=VM_ASYNC
 VP_SYS_VS_Systick.Mode=SysTick
 VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+VP_TIM1_VS_ClockSourceINT.Mode=Internal
+VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT
 board=NUCLEO-F072RB
 boardIOC=true
 isbadioc=false