Panel retainers are different in master cad and stl files.

[masimplo]

Stl files look like this:


https://github.com/VoronDesign/Voron-1/blob/Voron1.8/STLs/Panel_Mounting/corner_panel_clip_3mm_x12.stl
https://github.com/VoronDesign/Voron-1/blob/Voron1.8/STLs/Panel_Mounting/corner_panel_clip_6mm_x4.stl
https://github.com/VoronDesign/Voron-1/blob/Voron1.8/STLs/Panel_Mounting/midspan_panel_clip_3mm_x12.stl
https://github.com/VoronDesign/Voron-1/blob/Voron1.8/STLs/Panel_Mounting/midspan_panel_clip_6mm_x3.stl

while in the cad file they look like this:

Not sure which ones supersede which.