Update content/hardware/07.opta/opta-family/opta/tutorials/08.memory-partitioning/content.md

TaddyHC · BenjaminDannegard · web-flow · commit cff35cf0cedb · 2025-05-20T14:38:27.000-06:00
Co-authored-by: BenjaminDannegard &lt;b.dannegard@arduino.cc&gt;
diff --git a/content/hardware/07.opta/opta-family/opta/tutorials/08.memory-partitioning/content.md b/content/hardware/07.opta/opta-family/opta/tutorials/08.memory-partitioning/content.md
@@ -324,7 +324,8 @@ void loop() {
 }
 ```
 
-The sketch shown above performs following tasks:
+The sketch shown above performs the following tasks:
+
 
 1. **Initialize and erase the QSPI Flash memory**: The sketch initializes the QSPI Flash memory of the Opta™ and erases its content to prepare the memory for new firmware and data. One of the built-in LEDs of the device is used to indicate the progress of the memory-erasing process.
 

Original file line number	Diff line number	Diff line change
`@@ -324,7 +324,8 @@ void loop() {`
`324`	`324`	`}`
`325`	`325`	```
`326`	`326`
`327`		`-The sketch shown above performs following tasks:`
	`327`	`+The sketch shown above performs the following tasks:`
	`328`	`+`
`328`	`329`
`329`	`330`	`1. Initialize and erase the QSPI Flash memory: The sketch initializes the QSPI Flash memory of the Opta™ and erases its content to prepare the memory for new firmware and data. One of the built-in LEDs of the device is used to indicate the progress of the memory-erasing process.`
`330`	`331`