HW-662 sensor integration with Arduino

[ben8622]

Integrate the sensor into our Arduino package with reliable readings for a sense of orientation. Output should be sent through serial.

[ben8622]

Okay I finally got it to be detected by the i2c scanner and get some values off of it. pinout is as follows:

HW-662 Pin	Arduin Mega Pin
VCC	3.3V
GND	GND
SCL	SCL
SDA	SDA
SO
CSB	3.3V
DRDY	GND
CADY	GND
CADO	GND

CSB connected to the power is required to "turn on" I2C and the other pins being on ground is to avoid interference messing with the address readings. I am using this example sketch to test it.

[ben8622]

Need to order copper pins and jumpers to separate the sensor and any magnetic materials for an accurate reading.