REQUEST: Add Support for Python 3.14

[rpanai]

Hi all.
I tried to install the lates coiled version but I get the following error.
Are you eventually planning to add support for this python version in the near future?

error    libmamba Could not solve for environment specs
    The following packages are incompatible
    ├─ coiled ==1.129.1 * is installable and it requires
    │  └─ gilknocker >=0.4.1 * with the potential options
    │     ├─ gilknocker 0.4.1 would require
    │     │  └─ python >=3.10,<3.11.0a0 *, which can be installed;
    │     ├─ gilknocker 0.4.1 would require
    │     │  └─ python >=3.11,<3.12.0a0 *, which can be installed;
    │     ├─ gilknocker 0.4.1 would require
    │     │  └─ python >=3.12,<3.13.0a0 *, which can be installed;
    │     ├─ gilknocker 0.4.1 would require
    │     │  └─ python >=3.13.0rc1,<3.14.0a0 *, which can be installed;
    │     ├─ gilknocker 0.4.1 would require
    │     │  └─ python >=3.8,<3.9.0a0 *, which can be installed;
    │     └─ gilknocker 0.4.1 would require
    │        └─ python >=3.9,<3.10.0a0 *, which can be installed;
    └─ pin on python =3.14 * is not installable because it requires
       └─ python =3.14 *, which conflicts with any installable versions previously reported.
critical libmamba Could not solve for environment specs

[dchudz]

Yes, we will. I can get you an estimate for when later this week.

[dan-blanchard]

It looks like the gilknocker conda-forge build for 3.14 failed. I'll see if I can get that fixed. conda-forge/gilknocker-feedstock#11

[crusaderky]

3.14 support has been added to dask 2026.1.2.
The gilknocker issue reported above has also been solved upstream.
I'm successfully using coiled 1.131.0 on my 3.14 environment.