diff --git a/docs/solutions/reference-designs/ad-swiot1l-sl/firmware-guide/index.rst b/docs/solutions/reference-designs/ad-swiot1l-sl/firmware-guide/index.rst index 17c13a35d07..9d44b42220c 100644 --- a/docs/solutions/reference-designs/ad-swiot1l-sl/firmware-guide/index.rst +++ b/docs/solutions/reference-designs/ad-swiot1l-sl/firmware-guide/index.rst @@ -12,7 +12,7 @@ System Setup ------------ - Connect the AD-SWIOT1L-SL to the AD-T1LUSB2.0-EBZ using the single pair Ethernet cable. -- Connect the AD-T1LUSB2.0-EBZ to your PC using an USB cable. +- Connect the AD-T1LUSB2.0-EBZ to your PC using an usb cable. - Connect the 24 V power supply to the AD-SWIOT1L-SL. .. figure:: picture1.jpg @@ -40,7 +40,7 @@ the way to production firmware and applications development. .. important:: The system comes pre-programmed with a standard firmware. To work with - **Scopy**, you need to flash the specific static IP firmware version. + **Scopy**, you need to flash the specific static ip firmware version. **Scopy** will work only with the official `AD-SWIOT1L-SL firmware releases `_ @@ -48,16 +48,16 @@ the way to production firmware and applications development. Updating the AD-SWIOT1L-SL Firmware ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -To update the firmware on the AD-SWIOT1L-SL, the MAX32625PICO programmer is used as a SWD interface to flash the new firmware image. The MAX32625PICO comes with a default bootloader that we need to replace. +To update the firmware on the AD-SWIOT1L-SL, the MAX32625PICO programmer is used as a swd interface to flash the new firmware image. The MAX32625PICO comes with a default bootloader that we need to replace. #. Download the firmware image: `MAX32625PICO firmware `__ #. Set the MAX32625PICO in MAINTENANCE mode: * Disconnect the MAX32625PICO from the PC and the AD-SWIOT1L-SL board. - * Plug the micro USB cable only in the MAX32625PICO. + * Plug the micro usb cable only in the MAX32625PICO. * Keep the button on the MAX32625PICO pressed. - * Plug the micro USB cable into the PC. + * Plug the micro usb cable into the PC. * Once you see the MAINTENANCE drive being mounted, you may release the button. .. figure:: MAINTENANCE.jpg @@ -72,13 +72,13 @@ To update the firmware on the AD-SWIOT1L-SL, the MAX32625PICO programmer is used :align: center #. After a few seconds, the MAINTENANCE drive will disappear and will be replaced - by a drive named DAPLINK. Once this is done, the process is complete, and the - MAX32625PICO may be used to flash the firmware of the AD-SWIOT1L-SL board. + by a drive named Daplink. Once this is done, the process is complete, and the + MAX32625PICO may be used to flash the firmware on the AD-SWIOT1L-SL board. Programming the AD-SWIOT1L-SL ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- Connect the MAX32625PICO to the PC using the micro USB cable. +- Connect the MAX32625PICO to the PC using the micro usb cable. - Connect the MAX32625PICO to the AD-SWIOT1L-SL board using the 10-pin ribbon cable. - Connect the 24 V power supply to the AD-SWIOT1L-SL. Make sure the board is powered up for the next steps. @@ -86,9 +86,10 @@ Programming the AD-SWIOT1L-SL AD-SWIOT1L-SL Programming Setup -* A DAPLINK drive should appear as mounted on your PC. -* Drag and drop the new firmware image into the DAPLINK drive. After a few seconds, the drive will be remounted. -* Check the DAPLINK directory and make sure there is no FAIL.TXT file. In case +* A Daplink should appear as mounted on your PC. +* Drag and drop the new firmware image into the Daplink drive. After a few + seconds, the drive will be remounted. +* Check the Daplink directory and make sure there is no FAIL.TXT file. In case there is, repeat the drag and drop step. Otherwise, you may disconnect the MAX32625PICO from the AD-SWIOT1L-SL, since the firmware update is complete. @@ -100,5 +101,5 @@ The :git-no-OS:`AD-SWIOT1L-SL firmware ` is based on Analog Devices’ open-source no-OS framework, which includes all the tools required for embedded code development and debugging as well as libraries enabling host-side connectivity for system configuration and data transfer over -the UART or the 10BASE-T1L interfaces. The firmware source code and related +the uart the 10BASE-T1L interfaces. The firmware source code and related documentation can be found on the Analog Devices GitHub at the link above. \ No newline at end of file diff --git a/docs/solutions/reference-designs/ad-swiot1l-sl/index.rst b/docs/solutions/reference-designs/ad-swiot1l-sl/index.rst index cb74d3e7e02..0f0ba29fcc3 100644 --- a/docs/solutions/reference-designs/ad-swiot1l-sl/index.rst +++ b/docs/solutions/reference-designs/ad-swiot1l-sl/index.rst @@ -49,9 +49,9 @@ system together and get it up and running in no time. This is what you’ll find in the development kit box: - 1 x :adi:`AD-SWIOT1L-SL` board with enclosure -- 1 x :adi:`AD-T1LUSB-EBZ` 10BASE-T1L to USB adapter board -- 1 x PROFIBUS (1x2x18AWG) cable for Single Pair Ethernet (SPE) connectivity -- 1 x USB 2.0 cable +- 1 x :adi:`AD-T1LUSB-EBZ` 10BASE-T1L to usb adapter board. +- 1 x Profibus (1x2x18AWG) cable for Single Pair Ethernet (SPE) connectivity +- 1 x usb 2.0 cable - 1 x cable connector for the external 24 V power supply - 1 x cable connector for channels connectivity diff --git a/docs/solutions/reference-designs/ad-swiot1l-sl/software-guide/index.rst b/docs/solutions/reference-designs/ad-swiot1l-sl/software-guide/index.rst index 581c300c9e2..af77168c344 100644 --- a/docs/solutions/reference-designs/ad-swiot1l-sl/software-guide/index.rst +++ b/docs/solutions/reference-designs/ad-swiot1l-sl/software-guide/index.rst @@ -12,7 +12,7 @@ System Setup ------------ - Connect the AD-SWIOT1L-SL to the AD-T1LUSB2.0-EBZ using the single pair Ethernet cable. -- Connect the AD-T1LUSB2.0-EBZ to your PC using an USB cable. +- Connect the AD-T1LUSB2.0-EBZ to your PC using an usb cable - Connect the 24 V power supply to the AD-SWIOT1L-SL. Windows User Guide @@ -20,9 +20,9 @@ Windows User Guide - Connect the AD-SWIOT1L-SL to your Windows PC using the AD-T1LUSB2.0-EBZ. To communicate with the AD-SWIOT1L-SL board, you need to configure your Windows -PC's network adapter with a static IP address in the same subnet as the board e.g 192.168.97.1/24 +PC's network adapter with a static ip address in the same subnet as the board e.g 192.168.97.1/24 -The AD-SWIOT1L-SL board uses the static IP address: **192.168.97.40** +The AD-SWIOT1L-SL board uses the static ip address: **192.168.97.40** Configure Windows Network Adapter ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -32,15 +32,15 @@ Configure Windows Network Adapter :width: 400 px :align: center -2. Select your ethernet interface and click "Edit" to modify the IP settings +2. Select your Ethernet interface and click "Edit" to modify the ip settings .. figure:: 2.png :width: 300 px :align: center -3. Set the IP settings to manual and configure the following values: +3. Set the ip settings to manual and configure the following values: - - **IP address**: 192.168.97.1 + - **ip address**: 192.168.97.1 - **Subnet mask**: 255.255.255.0 .. figure:: 3.png @@ -53,7 +53,7 @@ Configure Windows Network Adapter :width: 450 px :align: center -4. Open a command prompt and verify the new assigned IP address using the command: +4. Open a command prompt and verify the new assigned ip address using the command: .. code:: bash @@ -75,16 +75,16 @@ Configure Windows Network Adapter .. Add Windows-specific instructions here -Linux User Guide +linux User Guide ---------------- -- Connect the AD-SWIOT1L-SL to your Linux PC using the AD-T1LUSB2.0-EBZ +- Connect the AD-SWIOT1L-SL to your linux PC using the AD-T1LUSB2.0-EBZ -To communicate with the AD-SWIOT1L-SL board, you need to configure your Linux PC’s network +To communicate with the AD-SWIOT1L-SL board, you need to configure your linux PC's network adapter with a static IP address in the same subnet as the board e.g 192.168.97.1/24. -Configure Linux Network Adapter +Configure linux Network Adapter ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1. Identify the network interface corresponding to the AD-T1LUSB2.0-EBZ using the command: @@ -93,7 +93,7 @@ Configure Linux Network Adapter :width: 300 px :align: center -2. Configure the network interface with a static IP address: +2. Configure the network interface with a static ip address: .. figure:: linux_2.png :width: 400 px @@ -127,7 +127,7 @@ comprehensive `Scopy Plugin Documentation