Wiring

[m00nsp3ll]

Hello,
im going to build your vario but i need wiring scheme. Could you please share it.

Regards,

[danheeks]

see in vario/bmp180piezo/bmp180piezo.ino

/*
Hardware connections:

• (GND) to GND

• (VDD) to 3.3V
  SCL to A5
  SDA to A4
  */

Also, I am connecting 3 x AA alkaline batteries via an on/off swithch to the 5V and GND on the arduino nano.

Is this enough?

[m00nsp3ll]

thank you for the reply, which pins should i wire the Piezo buzzer. Regards,

…

On Sat, 15 Feb 2020 at 12:56, danheeks ***@***.***> wrote: see in vario/bmp180piezo/bmp180piezo.ino /* Hardware connections: - (GND) to GND - (VDD) to 3.3V SCL to A5 SDA to A4 */ Also, I am connecting 3 x AA alkaline batteries via an on/off swithch to the 5V and GND on the arduino nano. Is this enough? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2?email_source=notifications&email_token=AAWYWFSG6OZX5HPNKX6QNKLRC634BA5CNFSM4KVXA57KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEL3GQQI#issuecomment-586573889>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAWYWFVOXKLAAAFQ5HQG7BDRC634BANCNFSM4KVXA57A> .

-- Harun Sivaslı

[danheeks]

D9 and D10 to the Piezo Buzzer.
I've just added a comment to the source code.

[m00nsp3ll]

thank you very much, i am going to build it and test. regards

…

On Sun, 16 Feb 2020 at 11:45, danheeks ***@***.***> wrote: D9 and D10 to the Piezo Buzzer. I've just added a comment to the source code. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#2?email_source=notifications&email_token=AAWYWFSU2IWQUVBBNNJWOWDRDD4LLA5CNFSM4KVXA57KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEL4A67A#issuecomment-586682236>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAWYWFX226U5GABQNW5QQS3RDD4LLANCNFSM4KVXA57A> .

-- Harun Sivaslı