Saving Settings Returns Error in Console

[sparticvs]

I get an error in the console when attempting to setup Kickstarter Edition Oaks. I get an error that says, Expected 0x2, but received 0x30.

I have dumped the value and validated the ASN.1 structure is valid. I'd love to help debug further, but the code minification makes that impossible. If you have an issue reproducing, I can drop the console output in here.

[kalebdf]

Did you have any luck with this @sparticvs? I too receive the same error.

[sparticvs]

@kalebdf I haven't been able to work around this.

[eironside]

I was able to get around this, but I'm still not entirely sure what part of the following fixed it (I'm not going to try again now that I got my oak working again).

Download the config.html and changed an HTTPS to HTTP (not sure exactly what I changed). Used the fixed IP trick below when connecting to the Oak. I then used IE to set the wifi and it seemed to work (Chrome was giving me the "0x2, but received 0x30" error).

[quote author=nelsonsilvafilho link=topic=2112.msg9759#msg9759 date=1458685533]
In a desperate try to get the Oks's WiFi and registered at Particle.io I
1 - Open the SoftAP URL;
2 - Input user/password and click LOGIN;
3 - Connect to ACORN-XXXXX but assigned a fixed IP of 192.168.0.22 mask 255.255.255.0 gateway 192.168.0.1 dns 192.168.0.1;
4 - Click NEXT and surprise!!!!! It went ahead...
5 - Choose WiFi access point;
6 - Input WiFi password;
7 - Had to claim the OAK manually at Particle.io;
8 - It is working and uploading fron Arduino 1.6.5 R2

Hope it helps to fix the problem with WiFi setup
[/quote]

[sparticvs]

I will have to see if I can do that. I don't have IE, so that won't be an easy thing to test completely. I will try to give it a shot soon.