+ *
+ * Keep in mind that if an animation is running, any child elements cannot be animated until the parent element's
+ * animation has completed.
+ *
+ *
CSS-defined Animations
+ * The animate service will automatically apply two CSS classes to the animated element and these two CSS classes
+ * are designed to contain the start and end CSS styling. Both CSS transitions and keyframe animations are supported
+ * and can be used to play along with this naming structure.
+ *
+ * The following code below demonstrates how to perform animations using **CSS transitions** with Angular:
+ *
+ *
+ *
+ *
+ *
+ *
+ *
+ *
+ *
+ * The following code below demonstrates how to perform animations using **CSS animations** with Angular:
+ *
+ *
+ *
+ *
+ *
+ *
+ *
+ *
+ *
+ * Both CSS3 animations and transitions can be used together and the animate service will figure out the correct duration and delay timing.
+ *
+ * Upon DOM mutation, the event class is added first (something like `ng-enter`), then the browser prepares itself to add
+ * the active class (in this case `ng-enter-active`) which then triggers the animation. The animation module will automatically
+ * detect the CSS code to determine when the animation ends. Once the animation is over then both CSS classes will be
+ * removed from the DOM. If a browser does not support CSS transitions or CSS animations then the animation will start and end
+ * immediately resulting in a DOM element that is at its final state. This final state is when the DOM element
+ * has no CSS transition/animation classes applied to it.
+ *
+ *
CSS Staggering Animations
+ * A Staggering animation is a collection of animations that are issued with a slight delay in between each successive operation resulting in a
+ * curtain-like effect. The ngAnimate module, as of 1.2.0, supports staggering animations and the stagger effect can be
+ * performed by creating a **ng-EVENT-stagger** CSS class and attaching that class to the base CSS class used for
+ * the animation. The style property expected within the stagger class can either be a **transition-delay** or an
+ * **animation-delay** property (or both if your animation contains both transitions and keyframe animations).
+ *
+ *
+ * .my-animation.ng-enter {
+ * /* standard transition code */
+ * -webkit-transition: 1s linear all;
+ * transition: 1s linear all;
+ * opacity:0;
+ * }
+ * .my-animation.ng-enter-stagger {
+ * /* this will have a 100ms delay between each successive leave animation */
+ * -webkit-transition-delay: 0.1s;
+ * transition-delay: 0.1s;
+ *
+ * /* in case the stagger doesn't work then these two values
+ * must be set to 0 to avoid an accidental CSS inheritance */
+ * -webkit-transition-duration: 0s;
+ * transition-duration: 0s;
+ * }
+ * .my-animation.ng-enter.ng-enter-active {
+ * /* standard transition styles */
+ * opacity:1;
+ * }
+ *
+ *
+ * Staggering animations work by default in ngRepeat (so long as the CSS class is defined). Outside of ngRepeat, to use staggering animations
+ * on your own, they can be triggered by firing multiple calls to the same event on $animate. However, the restrictions surrounding this
+ * are that each of the elements must have the same CSS className value as well as the same parent element. A stagger operation
+ * will also be reset if more than 10ms has passed after the last animation has been fired.
+ *
+ * The following code will issue the **ng-leave-stagger** event on the element provided:
+ *
+ *
+ *
+ * Stagger animations are currently only supported within CSS-defined animations.
+ *
+ *
JavaScript-defined Animations
+ * In the event that you do not want to use CSS3 transitions or CSS3 animations or if you wish to offer animations on browsers that do not
+ * yet support CSS transitions/animations, then you can make use of JavaScript animations defined inside of your AngularJS module.
+ *
+ *
+ * //!annotate="YourApp" Your AngularJS Module|Replace this or ngModule with the module that you used to define your application.
+ * var ngModule = angular.module('YourApp', []);
+ * ngModule.animation('.my-crazy-animation', function() {
+ * return {
+ * enter: function(element, done) {
+ * //run the animation here and call done when the animation is complete
+ * return function(cancelled) {
+ * //this (optional) function will be called when the animation
+ * //completes or when the animation is cancelled (the cancelled
+ * //flag will be set to true if cancelled).
+ * }
+ * }
+ * leave: function(element, done) { },
+ * move: function(element, done) { },
+ *
+ * //animation that can be triggered before the class is added
+ * beforeAddClass: function(element, className, done) { },
+ *
+ * //animation that can be triggered after the class is added
+ * addClass: function(element, className, done) { },
+ *
+ * //animation that can be triggered before the class is removed
+ * beforeRemoveClass: function(element, className, done) { },
+ *
+ * //animation that can be triggered after the class is removed
+ * removeClass: function(element, className, done) { }
+ * }
+ * });
+ *
+ *
+ * JavaScript-defined animations are created with a CSS-like class selector and a collection of events which are set to run
+ * a javascript callback function. When an animation is triggered, $animate will look for a matching animation which fits
+ * the element's CSS class attribute value and then run the matching animation event function (if found).
+ * In other words, if the CSS classes present on the animated element match any of the JavaScript animations then the callback function will
+ * be executed. It should be also noted that only simple, single class selectors are allowed (compound class selectors are not supported).
+ *
+ * Within a JavaScript animation, an object containing various event callback animation functions is expected to be returned.
+ * As explained above, these callbacks are triggered based on the animation event. Therefore if an enter animation is run,
+ * and the JavaScript animation is found, then the enter callback will handle that animation (in addition to the CSS keyframe animation
+ * or transition code that is defined via a stylesheet).
+ *
+ */
+
+angular.module('ngAnimate', ['ng'])
+
+ /**
+ * @ngdoc object
+ * @name ngAnimate.$animateProvider
+ * @description
+ *
+ * The `$animateProvider` allows developers to register JavaScript animation event handlers directly inside of a module.
+ * When an animation is triggered, the $animate service will query the $animate service to find any animations that match
+ * the provided name value.
+ *
+ * Requires the {@link ngAnimate `ngAnimate`} module to be installed.
+ *
+ * Please visit the {@link ngAnimate `ngAnimate`} module overview page learn more about how to use animations in your application.
+ *
+ */
+ .config(['$provide', '$animateProvider', function($provide, $animateProvider) {
+ var noop = angular.noop;
+ var forEach = angular.forEach;
+ var selectors = $animateProvider.$$selectors;
+
+ var ELEMENT_NODE = 1;
+ var NG_ANIMATE_STATE = '$$ngAnimateState';
+ var NG_ANIMATE_CLASS_NAME = 'ng-animate';
+ var rootAnimateState = {running: true};
+
+ $provide.decorator('$animate', ['$delegate', '$injector', '$sniffer', '$rootElement', '$timeout', '$rootScope', '$document',
+ function($delegate, $injector, $sniffer, $rootElement, $timeout, $rootScope, $document) {
+
+ $rootElement.data(NG_ANIMATE_STATE, rootAnimateState);
+
+ // disable animations during bootstrap, but once we bootstrapped, enable animations
+ $rootScope.$$postDigest(function() {
+ rootAnimateState.running = false;
+ });
+
+ function lookup(name) {
+ if (name) {
+ var matches = [],
+ flagMap = {},
+ classes = name.substr(1).split('.');
+
+ //the empty string value is the default animation
+ //operation which performs CSS transition and keyframe
+ //animations sniffing. This is always included for each
+ //element animation procedure if the browser supports
+ //transitions and/or keyframe animations
+ if ($sniffer.transitions || $sniffer.animations) {
+ classes.push('');
+ }
+
+ for(var i=0; i < classes.length; i++) {
+ var klass = classes[i],
+ selectorFactoryName = selectors[klass];
+ if(selectorFactoryName && !flagMap[klass]) {
+ matches.push($injector.get(selectorFactoryName));
+ flagMap[klass] = true;
+ }
+ }
+ return matches;
+ }
+ }
+
+ /**
+ * @ngdoc object
+ * @name ngAnimate.$animate
+ * @function
+ *
+ * @description
+ * The `$animate` service provides animation detection support while performing DOM operations (enter, leave and move) as well as during addClass and removeClass operations.
+ * When any of these operations are run, the $animate service
+ * will examine any JavaScript-defined animations (which are defined by using the $animateProvider provider object)
+ * as well as any CSS-defined animations against the CSS classes present on the element once the DOM operation is run.
+ *
+ * The `$animate` service is used behind the scenes with pre-existing directives and animation with these directives
+ * will work out of the box without any extra configuration.
+ *
+ * Requires the {@link ngAnimate `ngAnimate`} module to be installed.
+ *
+ * Please visit the {@link ngAnimate `ngAnimate`} module overview page learn more about how to use animations in your application.
+ *
+ */
+ return {
+ /**
+ * @ngdoc function
+ * @name ngAnimate.$animate#enter
+ * @methodOf ngAnimate.$animate
+ * @function
+ *
+ * @description
+ * Appends the element to the parentElement element that resides in the document and then runs the enter animation. Once
+ * the animation is started, the following CSS classes will be present on the element for the duration of the animation:
+ *
+ * Below is a breakdown of each step that occurs during enter animation:
+ *
+ * | Animation Step | What the element class attribute looks like |
+ * |----------------------------------------------------------------------------------------------|---------------------------------------------|
+ * | 1. $animate.enter(...) is called | class="my-animation" |
+ * | 2. element is inserted into the parentElement element or beside the afterElement element | class="my-animation" |
+ * | 3. $animate runs any JavaScript-defined animations on the element | class="my-animation ng-animate" |
+ * | 4. the .ng-enter class is added to the element | class="my-animation ng-animate ng-enter" |
+ * | 5. $animate scans the element styles to get the CSS transition/animation duration and delay | class="my-animation ng-animate ng-enter" |
+ * | 6. $animate waits for 10ms (this performs a reflow) | class="my-animation ng-animate ng-enter" |
+ * | 7. the .ng-enter-active and .ng-animate-active classes are added (this triggers the CSS transition/animation) | class="my-animation ng-animate ng-animate-active ng-enter ng-enter-active" |
+ * | 8. $animate waits for X milliseconds for the animation to complete | class="my-animation ng-animate ng-animate-active ng-enter ng-enter-active" |
+ * | 9. The animation ends and all generated CSS classes are removed from the element | class="my-animation" |
+ * | 10. The doneCallback() callback is fired (if provided) | class="my-animation" |
+ *
+ * @param {jQuery/jqLite element} element the element that will be the focus of the enter animation
+ * @param {jQuery/jqLite element} parentElement the parent element of the element that will be the focus of the enter animation
+ * @param {jQuery/jqLite element} afterElement the sibling element (which is the previous element) of the element that will be the focus of the enter animation
+ * @param {function()=} doneCallback the callback function that will be called once the animation is complete
+ */
+ enter : function(element, parentElement, afterElement, doneCallback) {
+ this.enabled(false, element);
+ $delegate.enter(element, parentElement, afterElement);
+ $rootScope.$$postDigest(function() {
+ performAnimation('enter', 'ng-enter', element, parentElement, afterElement, noop, doneCallback);
+ });
+ },
+
+ /**
+ * @ngdoc function
+ * @name ngAnimate.$animate#leave
+ * @methodOf ngAnimate.$animate
+ * @function
+ *
+ * @description
+ * Runs the leave animation operation and, upon completion, removes the element from the DOM. Once
+ * the animation is started, the following CSS classes will be added for the duration of the animation:
+ *
+ * Below is a breakdown of each step that occurs during enter animation:
+ *
+ * | Animation Step | What the element class attribute looks like |
+ * |----------------------------------------------------------------------------------------------|---------------------------------------------|
+ * | 1. $animate.leave(...) is called | class="my-animation" |
+ * | 2. $animate runs any JavaScript-defined animations on the element | class="my-animation ng-animate" |
+ * | 3. the .ng-leave class is added to the element | class="my-animation ng-animate ng-leave" |
+ * | 4. $animate scans the element styles to get the CSS transition/animation duration and delay | class="my-animation ng-animate ng-leave" |
+ * | 5. $animate waits for 10ms (this performs a reflow) | class="my-animation ng-animate ng-leave" |
+ * | 6. the .ng-leave-active and .ng-animate-active classes is added (this triggers the CSS transition/animation) | class="my-animation ng-animate ng-animate-active ng-leave ng-leave-active" |
+ * | 7. $animate waits for X milliseconds for the animation to complete | class="my-animation ng-animate ng-animate-active ng-leave ng-leave-active" |
+ * | 8. The animation ends and all generated CSS classes are removed from the element | class="my-animation" |
+ * | 9. The element is removed from the DOM | ... |
+ * | 10. The doneCallback() callback is fired (if provided) | ... |
+ *
+ * @param {jQuery/jqLite element} element the element that will be the focus of the leave animation
+ * @param {function()=} doneCallback the callback function that will be called once the animation is complete
+ */
+ leave : function(element, doneCallback) {
+ cancelChildAnimations(element);
+ this.enabled(false, element);
+ $rootScope.$$postDigest(function() {
+ performAnimation('leave', 'ng-leave', element, null, null, function() {
+ $delegate.leave(element);
+ }, doneCallback);
+ });
+ },
+
+ /**
+ * @ngdoc function
+ * @name ngAnimate.$animate#move
+ * @methodOf ngAnimate.$animate
+ * @function
+ *
+ * @description
+ * Fires the move DOM operation. Just before the animation starts, the animate service will either append it into the parentElement container or
+ * add the element directly after the afterElement element if present. Then the move animation will be run. Once
+ * the animation is started, the following CSS classes will be added for the duration of the animation:
+ *
+ * Below is a breakdown of each step that occurs during move animation:
+ *
+ * | Animation Step | What the element class attribute looks like |
+ * |----------------------------------------------------------------------------------------------|---------------------------------------------|
+ * | 1. $animate.move(...) is called | class="my-animation" |
+ * | 2. element is moved into the parentElement element or beside the afterElement element | class="my-animation" |
+ * | 3. $animate runs any JavaScript-defined animations on the element | class="my-animation ng-animate" |
+ * | 4. the .ng-move class is added to the element | class="my-animation ng-animate ng-move" |
+ * | 5. $animate scans the element styles to get the CSS transition/animation duration and delay | class="my-animation ng-animate ng-move" |
+ * | 6. $animate waits for 10ms (this performs a reflow) | class="my-animation ng-animate ng-move" |
+ * | 7. the .ng-move-active and .ng-animate-active classes is added (this triggers the CSS transition/animation) | class="my-animation ng-animate ng-animate-active ng-move ng-move-active" |
+ * | 8. $animate waits for X milliseconds for the animation to complete | class="my-animation ng-animate ng-animate-active ng-move ng-move-active" |
+ * | 9. The animation ends and all generated CSS classes are removed from the element | class="my-animation" |
+ * | 10. The doneCallback() callback is fired (if provided) | class="my-animation" |
+ *
+ * @param {jQuery/jqLite element} element the element that will be the focus of the move animation
+ * @param {jQuery/jqLite element} parentElement the parentElement element of the element that will be the focus of the move animation
+ * @param {jQuery/jqLite element} afterElement the sibling element (which is the previous element) of the element that will be the focus of the move animation
+ * @param {function()=} doneCallback the callback function that will be called once the animation is complete
+ */
+ move : function(element, parentElement, afterElement, doneCallback) {
+ cancelChildAnimations(element);
+ this.enabled(false, element);
+ $delegate.move(element, parentElement, afterElement);
+ $rootScope.$$postDigest(function() {
+ performAnimation('move', 'ng-move', element, parentElement, afterElement, noop, doneCallback);
+ });
+ },
+
+ /**
+ * @ngdoc function
+ * @name ngAnimate.$animate#addClass
+ * @methodOf ngAnimate.$animate
+ *
+ * @description
+ * Triggers a custom animation event based off the className variable and then attaches the className value to the element as a CSS class.
+ * Unlike the other animation methods, the animate service will suffix the className value with {@type -add} in order to provide
+ * the animate service the setup and active CSS classes in order to trigger the animation (this will be skipped if no CSS transitions
+ * or keyframes are defined on the -add or base CSS class).
+ *
+ * Below is a breakdown of each step that occurs during addClass animation:
+ *
+ * | Animation Step | What the element class attribute looks like |
+ * |------------------------------------------------------------------------------------------------|---------------------------------------------|
+ * | 1. $animate.addClass(element, 'super') is called | class="my-animation" |
+ * | 2. $animate runs any JavaScript-defined animations on the element | class="my-animation ng-animate" |
+ * | 3. the .super-add class are added to the element | class="my-animation ng-animate super-add" |
+ * | 4. $animate scans the element styles to get the CSS transition/animation duration and delay | class="my-animation ng-animate super-add" |
+ * | 5. $animate waits for 10ms (this performs a reflow) | class="my-animation ng-animate super-add" |
+ * | 6. the .super, .super-add-active and .ng-animate-active classes are added (this triggers the CSS transition/animation) | class="my-animation ng-animate ng-animate-active super super-add super-add-active" |
+ * | 7. $animate waits for X milliseconds for the animation to complete | class="my-animation super-add super-add-active" |
+ * | 8. The animation ends and all generated CSS classes are removed from the element | class="my-animation super" |
+ * | 9. The super class is kept on the element | class="my-animation super" |
+ * | 10. The doneCallback() callback is fired (if provided) | class="my-animation super" |
+ *
+ * @param {jQuery/jqLite element} element the element that will be animated
+ * @param {string} className the CSS class that will be added to the element and then animated
+ * @param {function()=} doneCallback the callback function that will be called once the animation is complete
+ */
+ addClass : function(element, className, doneCallback) {
+ performAnimation('addClass', className, element, null, null, function() {
+ $delegate.addClass(element, className);
+ }, doneCallback);
+ },
+
+ /**
+ * @ngdoc function
+ * @name ngAnimate.$animate#removeClass
+ * @methodOf ngAnimate.$animate
+ *
+ * @description
+ * Triggers a custom animation event based off the className variable and then removes the CSS class provided by the className value
+ * from the element. Unlike the other animation methods, the animate service will suffix the className value with {@type -remove} in
+ * order to provide the animate service the setup and active CSS classes in order to trigger the animation (this will be skipped if
+ * no CSS transitions or keyframes are defined on the -remove or base CSS classes).
+ *
+ * Below is a breakdown of each step that occurs during removeClass animation:
+ *
+ * | Animation Step | What the element class attribute looks like |
+ * |-----------------------------------------------------------------------------------------------|---------------------------------------------|
+ * | 1. $animate.removeClass(element, 'super') is called | class="my-animation super" |
+ * | 2. $animate runs any JavaScript-defined animations on the element | class="my-animation super ng-animate" |
+ * | 3. the .super-remove class are added to the element | class="my-animation super ng-animate super-remove"|
+ * | 4. $animate scans the element styles to get the CSS transition/animation duration and delay | class="my-animation super ng-animate super-remove" |
+ * | 5. $animate waits for 10ms (this performs a reflow) | class="my-animation super ng-animate super-remove" |
+ * | 6. the .super-remove-active and .ng-animate-active classes are added and .super is removed (this triggers the CSS transition/animation) | class="my-animation ng-animate ng-animate-active super-remove super-remove-active" |
+ * | 7. $animate waits for X milliseconds for the animation to complete | class="my-animation ng-animate ng-animate-active super-remove super-remove-active" |
+ * | 8. The animation ends and all generated CSS classes are removed from the element | class="my-animation" |
+ * | 9. The doneCallback() callback is fired (if provided) | class="my-animation" |
+ *
+ *
+ * @param {jQuery/jqLite element} element the element that will be animated
+ * @param {string} className the CSS class that will be animated and then removed from the element
+ * @param {function()=} doneCallback the callback function that will be called once the animation is complete
+ */
+ removeClass : function(element, className, doneCallback) {
+ performAnimation('removeClass', className, element, null, null, function() {
+ $delegate.removeClass(element, className);
+ }, doneCallback);
+ },
+
+ /**
+ * @ngdoc function
+ * @name ngAnimate.$animate#enabled
+ * @methodOf ngAnimate.$animate
+ * @function
+ *
+ * @param {boolean=} value If provided then set the animation on or off.
+ * @param {jQuery/jqLite element=} element If provided then the element will be used to represent the enable/disable operation
+ * @return {boolean} Current animation state.
+ *
+ * @description
+ * Globally enables/disables animations.
+ *
+ */
+ enabled : function(value, element) {
+ switch(arguments.length) {
+ case 2:
+ if(value) {
+ cleanup(element);
+ } else {
+ var data = element.data(NG_ANIMATE_STATE) || {};
+ data.disabled = true;
+ element.data(NG_ANIMATE_STATE, data);
+ }
+ break;
+
+ case 1:
+ rootAnimateState.disabled = !value;
+ break;
+
+ default:
+ value = !rootAnimateState.disabled;
+ break;
+ }
+ return !!value;
+ }
+ };
+
+ /*
+ all animations call this shared animation triggering function internally.
+ The animationEvent variable refers to the JavaScript animation event that will be triggered
+ and the className value is the name of the animation that will be applied within the
+ CSS code. Element, parentElement and afterElement are provided DOM elements for the animation
+ and the onComplete callback will be fired once the animation is fully complete.
+ */
+ function performAnimation(animationEvent, className, element, parentElement, afterElement, domOperation, doneCallback) {
+ var currentClassName = element.attr('class') || '';
+ var classes = currentClassName + ' ' + className;
+ var animationLookup = (' ' + classes).replace(/\s+/g,'.');
+ if (!parentElement) {
+ parentElement = afterElement ? afterElement.parent() : element.parent();
+ }
+
+ var matches = lookup(animationLookup);
+ var isClassBased = animationEvent == 'addClass' || animationEvent == 'removeClass';
+ var ngAnimateState = element.data(NG_ANIMATE_STATE) || {};
+
+ //skip the animation if animations are disabled, a parent is already being animated,
+ //the element is not currently attached to the document body or then completely close
+ //the animation if any matching animations are not found at all.
+ //NOTE: IE8 + IE9 should close properly (run closeAnimation()) in case a NO animation is not found.
+ if (animationsDisabled(element, parentElement) || matches.length === 0) {
+ fireDOMOperation();
+ closeAnimation();
+ return;
+ }
+
+ var animations = [];
+ //only add animations if the currently running animation is not structural
+ //or if there is no animation running at all
+ if(!ngAnimateState.running || !(isClassBased && ngAnimateState.structural)) {
+ forEach(matches, function(animation) {
+ //add the animation to the queue to if it is allowed to be cancelled
+ if(!animation.allowCancel || animation.allowCancel(element, animationEvent, className)) {
+ var beforeFn, afterFn = animation[animationEvent];
+
+ //Special case for a leave animation since there is no point in performing an
+ //animation on a element node that has already been removed from the DOM
+ if(animationEvent == 'leave') {
+ beforeFn = afterFn;
+ afterFn = null; //this must be falsy so that the animation is skipped for leave
+ } else {
+ beforeFn = animation['before' + animationEvent.charAt(0).toUpperCase() + animationEvent.substr(1)];
+ }
+ animations.push({
+ before : beforeFn,
+ after : afterFn
+ });
+ }
+ });
+ }
+
+ //this would mean that an animation was not allowed so let the existing
+ //animation do it's thing and close this one early
+ if(animations.length === 0) {
+ fireDOMOperation();
+ fireDoneCallbackAsync();
+ return;
+ }
+
+ //this value will be searched for class-based CSS className lookup. Therefore,
+ //we prefix and suffix the current className value with spaces to avoid substring
+ //lookups of className tokens
+ var futureClassName = ' ' + currentClassName + ' ';
+ if(ngAnimateState.running) {
+ //if an animation is currently running on the element then lets take the steps
+ //to cancel that animation and fire any required callbacks
+ $timeout.cancel(ngAnimateState.closeAnimationTimeout);
+ cleanup(element);
+ cancelAnimations(ngAnimateState.animations);
+
+ //if the class is removed during the reflow then it will revert the styles temporarily
+ //back to the base class CSS styling causing a jump-like effect to occur. This check
+ //here ensures that the domOperation is only performed after the reflow has commenced
+ if(ngAnimateState.beforeComplete) {
+ (ngAnimateState.done || noop)(true);
+ } else if(isClassBased && !ngAnimateState.structural) {
+ //class-based animations will compare element className values after cancelling the
+ //previous animation to see if the element properties already contain the final CSS
+ //class and if so then the animation will be skipped. Since the domOperation will
+ //be performed only after the reflow is complete then our element's className value
+ //will be invalid. Therefore the same string manipulation that would occur within the
+ //DOM operation will be performed below so that the class comparison is valid...
+ futureClassName = ngAnimateState.event == 'removeClass' ?
+ futureClassName.replace(ngAnimateState.className, '') :
+ futureClassName + ngAnimateState.className + ' ';
+ }
+ }
+
+ //There is no point in perform a class-based animation if the element already contains
+ //(on addClass) or doesn't contain (on removeClass) the className being animated.
+ //The reason why this is being called after the previous animations are cancelled
+ //is so that the CSS classes present on the element can be properly examined.
+ var classNameToken = ' ' + className + ' ';
+ if((animationEvent == 'addClass' && futureClassName.indexOf(classNameToken) >= 0) ||
+ (animationEvent == 'removeClass' && futureClassName.indexOf(classNameToken) == -1)) {
+ fireDOMOperation();
+ fireDoneCallbackAsync();
+ return;
+ }
+
+ //the ng-animate class does nothing, but it's here to allow for
+ //parent animations to find and cancel child animations when needed
+ element.addClass(NG_ANIMATE_CLASS_NAME);
+
+ element.data(NG_ANIMATE_STATE, {
+ running:true,
+ event:animationEvent,
+ className:className,
+ structural:!isClassBased,
+ animations:animations,
+ done:onBeforeAnimationsComplete
+ });
+
+ //first we run the before animations and when all of those are complete
+ //then we perform the DOM operation and run the next set of animations
+ invokeRegisteredAnimationFns(animations, 'before', onBeforeAnimationsComplete);
+
+ function onBeforeAnimationsComplete(cancelled) {
+ fireDOMOperation();
+ if(cancelled === true) {
+ closeAnimation();
+ return;
+ }
+
+ //set the done function to the final done function
+ //so that the DOM event won't be executed twice by accident
+ //if the after animation is cancelled as well
+ var data = element.data(NG_ANIMATE_STATE);
+ if(data) {
+ data.done = closeAnimation;
+ element.data(NG_ANIMATE_STATE, data);
+ }
+ invokeRegisteredAnimationFns(animations, 'after', closeAnimation);
+ }
+
+ function invokeRegisteredAnimationFns(animations, phase, allAnimationFnsComplete) {
+ var endFnName = phase + 'End';
+ forEach(animations, function(animation, index) {
+ var animationPhaseCompleted = function() {
+ progress(index, phase);
+ };
+
+ //there are no before functions for enter + move since the DOM
+ //operations happen before the performAnimation method fires
+ if(phase == 'before' && (animationEvent == 'enter' || animationEvent == 'move')) {
+ animationPhaseCompleted();
+ return;
+ }
+
+ if(animation[phase]) {
+ animation[endFnName] = isClassBased ?
+ animation[phase](element, className, animationPhaseCompleted) :
+ animation[phase](element, animationPhaseCompleted);
+ } else {
+ animationPhaseCompleted();
+ }
+ });
+
+ function progress(index, phase) {
+ var phaseCompletionFlag = phase + 'Complete';
+ var currentAnimation = animations[index];
+ currentAnimation[phaseCompletionFlag] = true;
+ (currentAnimation[endFnName] || noop)();
+
+ for(var i=0;i 0) {
+ aDuration *= parseInt(elementStyles[ANIMATION_PROP + ANIMATION_ITERATION_COUNT_KEY], 10) || 1;
+ }
+
+ animationDuration = Math.max(aDuration, animationDuration);
+ }
+ });
+ data = {
+ total : 0,
+ transitionPropertyStyle: transitionPropertyStyle,
+ transitionDurationStyle: transitionDurationStyle,
+ transitionDelayStyle: transitionDelayStyle,
+ transitionDelay: transitionDelay,
+ transitionDuration: transitionDuration,
+ animationDelayStyle: animationDelayStyle,
+ animationDelay: animationDelay,
+ animationDuration: animationDuration
+ };
+ if(cacheKey) {
+ lookupCache[cacheKey] = data;
+ }
+ }
+ return data;
+ }
+
+ function parseMaxTime(str) {
+ var maxValue = 0;
+ var values = angular.isString(str) ?
+ str.split(/\s*,\s*/) :
+ [];
+ forEach(values, function(value) {
+ maxValue = Math.max(parseFloat(value) || 0, maxValue);
+ });
+ return maxValue;
+ }
+
+ function getCacheKey(element) {
+ var parentElement = element.parent();
+ var parentID = parentElement.data(NG_ANIMATE_PARENT_KEY);
+ if(!parentID) {
+ parentElement.data(NG_ANIMATE_PARENT_KEY, ++parentCounter);
+ parentID = parentCounter;
+ }
+ return parentID + '-' + element[0].className;
+ }
+
+ function animateSetup(element, className) {
+ var cacheKey = getCacheKey(element);
+ var eventCacheKey = cacheKey + ' ' + className;
+ var stagger = {};
+ var ii = lookupCache[eventCacheKey] ? ++lookupCache[eventCacheKey].total : 0;
+
+ if(ii > 0) {
+ var staggerClassName = className + '-stagger';
+ var staggerCacheKey = cacheKey + ' ' + staggerClassName;
+ var applyClasses = !lookupCache[staggerCacheKey];
+
+ applyClasses && element.addClass(staggerClassName);
+
+ stagger = getElementAnimationDetails(element, staggerCacheKey);
+
+ applyClasses && element.removeClass(staggerClassName);
+ }
+
+ element.addClass(className);
+
+ var timings = getElementAnimationDetails(element, eventCacheKey);
+
+ /* there is no point in performing a reflow if the animation
+ timeout is empty (this would cause a flicker bug normally
+ in the page. There is also no point in performing an animation
+ that only has a delay and no duration */
+ var maxDuration = Math.max(timings.transitionDuration, timings.animationDuration);
+ if(maxDuration === 0) {
+ element.removeClass(className);
+ return false;
+ }
+
+ var node = element[0];
+ //temporarily disable the transition so that the enter styles
+ //don't animate twice (this is here to avoid a bug in Chrome/FF).
+ var activeClassName = '';
+ if(timings.transitionDuration > 0) {
+ element.addClass(NG_ANIMATE_FALLBACK_CLASS_NAME);
+ activeClassName += NG_ANIMATE_FALLBACK_ACTIVE_CLASS_NAME + ' ';
+ blockTransitions(element);
+ } else {
+ blockKeyframeAnimations(element);
+ }
+
+ forEach(className.split(' '), function(klass, i) {
+ activeClassName += (i > 0 ? ' ' : '') + klass + '-active';
+ });
+
+ element.data(NG_ANIMATE_CSS_DATA_KEY, {
+ className : className,
+ activeClassName : activeClassName,
+ maxDuration : maxDuration,
+ classes : className + ' ' + activeClassName,
+ timings : timings,
+ stagger : stagger,
+ ii : ii
+ });
+
+ return true;
+ }
+
+ function blockTransitions(element) {
+ element[0].style[TRANSITION_PROP + PROPERTY_KEY] = 'none';
+ }
+
+ function blockKeyframeAnimations(element) {
+ element[0].style[ANIMATION_PROP] = 'none 0s';
+ }
+
+ function unblockTransitions(element) {
+ var node = element[0], prop = TRANSITION_PROP + PROPERTY_KEY;
+ if(node.style[prop] && node.style[prop].length > 0) {
+ node.style[prop] = '';
+ }
+ }
+
+ function unblockKeyframeAnimations(element) {
+ element[0].style[ANIMATION_PROP] = '';
+ }
+
+ function animateRun(element, className, activeAnimationComplete) {
+ var data = element.data(NG_ANIMATE_CSS_DATA_KEY);
+ if(!element.hasClass(className) || !data) {
+ activeAnimationComplete();
+ return;
+ }
+
+ var node = element[0];
+ var timings = data.timings;
+ var stagger = data.stagger;
+ var maxDuration = data.maxDuration;
+ var activeClassName = data.activeClassName;
+ var maxDelayTime = Math.max(timings.transitionDelay, timings.animationDelay) * 1000;
+ var startTime = Date.now();
+ var css3AnimationEvents = ANIMATIONEND_EVENT + ' ' + TRANSITIONEND_EVENT;
+ var ii = data.ii;
+
+ var applyFallbackStyle, style = '', appliedStyles = [];
+ if(timings.transitionDuration > 0) {
+ var propertyStyle = timings.transitionPropertyStyle;
+ if(propertyStyle.indexOf('all') == -1) {
+ applyFallbackStyle = true;
+ var fallbackProperty = $sniffer.msie ? '-ms-zoom' : 'border-spacing';
+ style += CSS_PREFIX + 'transition-property: ' + propertyStyle + ', ' + fallbackProperty + '; ';
+ style += CSS_PREFIX + 'transition-duration: ' + timings.transitionDurationStyle + ', ' + timings.transitionDuration + 's; ';
+ appliedStyles.push(CSS_PREFIX + 'transition-property');
+ appliedStyles.push(CSS_PREFIX + 'transition-duration');
+ }
+ } else {
+ unblockKeyframeAnimations(element);
+ }
+
+ if(ii > 0) {
+ if(stagger.transitionDelay > 0 && stagger.transitionDuration === 0) {
+ var delayStyle = timings.transitionDelayStyle;
+ if(applyFallbackStyle) {
+ delayStyle += ', ' + timings.transitionDelay + 's';
+ }
+
+ style += CSS_PREFIX + 'transition-delay: ' +
+ prepareStaggerDelay(delayStyle, stagger.transitionDelay, ii) + '; ';
+ appliedStyles.push(CSS_PREFIX + 'transition-delay');
+ }
+
+ if(stagger.animationDelay > 0 && stagger.animationDuration === 0) {
+ style += CSS_PREFIX + 'animation-delay: ' +
+ prepareStaggerDelay(timings.animationDelayStyle, stagger.animationDelay, ii) + '; ';
+ appliedStyles.push(CSS_PREFIX + 'animation-delay');
+ }
+ }
+
+ if(appliedStyles.length > 0) {
+ var oldStyle = node.getAttribute('style') || '';
+ node.setAttribute('style', oldStyle + ' ' + style);
+ }
+
+ element.on(css3AnimationEvents, onAnimationProgress);
+ element.addClass(activeClassName);
+
+ // This will automatically be called by $animate so
+ // there is no need to attach this internally to the
+ // timeout done method.
+ return function onEnd(cancelled) {
+ element.off(css3AnimationEvents, onAnimationProgress);
+ element.removeClass(activeClassName);
+ animateClose(element, className);
+ for (var i in appliedStyles) {
+ node.style.removeProperty(appliedStyles[i]);
+ }
+ };
+
+ function onAnimationProgress(event) {
+ event.stopPropagation();
+ var ev = event.originalEvent || event;
+ var timeStamp = ev.$manualTimeStamp || ev.timeStamp || Date.now();
+ /* $manualTimeStamp is a mocked timeStamp value which is set
+ * within browserTrigger(). This is only here so that tests can
+ * mock animations properly. Real events fallback to event.timeStamp,
+ * or, if they don't, then a timeStamp is automatically created for them.
+ * We're checking to see if the timeStamp surpasses the expected delay,
+ * but we're using elapsedTime instead of the timeStamp on the 2nd
+ * pre-condition since animations sometimes close off early */
+ if(Math.max(timeStamp - startTime, 0) >= maxDelayTime && ev.elapsedTime >= maxDuration) {
+ activeAnimationComplete();
+ }
+ }
+ }
+
+ function prepareStaggerDelay(delayStyle, staggerDelay, index) {
+ var style = '';
+ forEach(delayStyle.split(','), function(val, i) {
+ style += (i > 0 ? ',' : '') +
+ (index * staggerDelay + parseInt(val, 10)) + 's';
+ });
+ return style;
+ }
+
+ function animateBefore(element, className) {
+ if(animateSetup(element, className)) {
+ return function(cancelled) {
+ cancelled && animateClose(element, className);
+ };
+ }
+ }
+
+ function animateAfter(element, className, afterAnimationComplete) {
+ if(element.data(NG_ANIMATE_CSS_DATA_KEY)) {
+ return animateRun(element, className, afterAnimationComplete);
+ } else {
+ animateClose(element, className);
+ afterAnimationComplete();
+ }
+ }
+
+ function animate(element, className, animationComplete) {
+ //If the animateSetup function doesn't bother returning a
+ //cancellation function then it means that there is no animation
+ //to perform at all
+ var preReflowCancellation = animateBefore(element, className);
+ if(!preReflowCancellation) {
+ animationComplete();
+ return;
+ }
+
+ //There are two cancellation functions: one is before the first
+ //reflow animation and the second is during the active state
+ //animation. The first function will take care of removing the
+ //data from the element which will not make the 2nd animation
+ //happen in the first place
+ var cancel = preReflowCancellation;
+ afterReflow(function() {
+ unblockTransitions(element);
+ //once the reflow is complete then we point cancel to
+ //the new cancellation function which will remove all of the
+ //animation properties from the active animation
+ cancel = animateAfter(element, className, animationComplete);
+ });
+
+ return function(cancelled) {
+ (cancel || noop)(cancelled);
+ };
+ }
+
+ function animateClose(element, className) {
+ element.removeClass(className);
+ element.removeClass(NG_ANIMATE_FALLBACK_CLASS_NAME);
+ element.removeData(NG_ANIMATE_CSS_DATA_KEY);
+ }
+
+ return {
+ allowCancel : function(element, animationEvent, className) {
+ //always cancel the current animation if it is a
+ //structural animation
+ var oldClasses = (element.data(NG_ANIMATE_CSS_DATA_KEY) || {}).classes;
+ if(!oldClasses || ['enter','leave','move'].indexOf(animationEvent) >= 0) {
+ return true;
+ }
+
+ var parentElement = element.parent();
+ var clone = angular.element(element[0].cloneNode());
+
+ //make the element super hidden and override any CSS style values
+ clone.attr('style','position:absolute; top:-9999px; left:-9999px');
+ clone.removeAttr('id');
+ clone.html('');
+
+ forEach(oldClasses.split(' '), function(klass) {
+ clone.removeClass(klass);
+ });
+
+ var suffix = animationEvent == 'addClass' ? '-add' : '-remove';
+ clone.addClass(suffixClasses(className, suffix));
+ parentElement.append(clone);
+
+ var timings = getElementAnimationDetails(clone);
+ clone.remove();
+
+ return Math.max(timings.transitionDuration, timings.animationDuration) > 0;
+ },
+
+ enter : function(element, animationCompleted) {
+ return animate(element, 'ng-enter', animationCompleted);
+ },
+
+ leave : function(element, animationCompleted) {
+ return animate(element, 'ng-leave', animationCompleted);
+ },
+
+ move : function(element, animationCompleted) {
+ return animate(element, 'ng-move', animationCompleted);
+ },
+
+ beforeAddClass : function(element, className, animationCompleted) {
+ var cancellationMethod = animateBefore(element, suffixClasses(className, '-add'));
+ if(cancellationMethod) {
+ afterReflow(function() {
+ unblockTransitions(element);
+ animationCompleted();
+ });
+ return cancellationMethod;
+ }
+ animationCompleted();
+ },
+
+ addClass : function(element, className, animationCompleted) {
+ return animateAfter(element, suffixClasses(className, '-add'), animationCompleted);
+ },
+
+ beforeRemoveClass : function(element, className, animationCompleted) {
+ var cancellationMethod = animateBefore(element, suffixClasses(className, '-remove'));
+ if(cancellationMethod) {
+ afterReflow(function() {
+ unblockTransitions(element);
+ animationCompleted();
+ });
+ return cancellationMethod;
+ }
+ animationCompleted();
+ },
+
+ removeClass : function(element, className, animationCompleted) {
+ return animateAfter(element, suffixClasses(className, '-remove'), animationCompleted);
+ }
+ };
+
+ function suffixClasses(classes, suffix) {
+ var className = '';
+ classes = angular.isArray(classes) ? classes : classes.split(/\s+/);
+ forEach(classes, function(klass, i) {
+ if(klass && klass.length > 0) {
+ className += (i > 0 ? ' ' : '') + klass + suffix;
+ }
+ });
+ return className;
+ }
+ }]);
+ }]);
+
+
+})(window, window.angular);
diff --git a/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-animate.min.js b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-animate.min.js
new file mode 100644
index 0000000..b797c77
--- /dev/null
+++ b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-animate.min.js
@@ -0,0 +1,22 @@
+/*
+ AngularJS v1.2.2
+ (c) 2010-2012 Google, Inc. http://angularjs.org
+ License: MIT
+*/
+(function(B,k,D){'use strict';k.module("ngAnimate",["ng"]).config(["$provide","$animateProvider",function(L,E){var q=k.noop,s=k.forEach,V=E.$$selectors,T=1,f="$$ngAnimateState",F="ng-animate",m={running:!0};L.decorator("$animate",["$delegate","$injector","$sniffer","$rootElement","$timeout","$rootScope","$document",function(G,B,H,h,A,r,D){function M(a){if(a){var d=[],c={};a=a.substr(1).split(".");(H.transitions||H.animations)&&a.push("");for(var b=0;b=s&&a.elapsedTime>=r&&u()}var f=a.data(z);if(a.hasClass(c)&&f){var k=a[0],l=f.timings,h=f.stagger,r=f.maxDuration,p=f.activeClassName,s=1E3*Math.max(l.transitionDelay,l.animationDelay),
+w=Date.now(),v=O+" "+N,t=f.ii,x,f="",n=[];if(0
+ *
+ * See {@link ngCookies.$cookies `$cookies`} and
+ * {@link ngCookies.$cookieStore `$cookieStore`} for usage.
+ */
+
+
+angular.module('ngCookies', ['ng']).
+ /**
+ * @ngdoc object
+ * @name ngCookies.$cookies
+ * @requires $browser
+ *
+ * @description
+ * Provides read/write access to browser's cookies.
+ *
+ * Only a simple Object is exposed and by adding or removing properties to/from
+ * this object, new cookies are created/deleted at the end of current $eval.
+ *
+ * Requires the {@link ngCookies `ngCookies`} module to be installed.
+ *
+ * @example
+
+
+
+
+
+ */
+ factory('$cookies', ['$rootScope', '$browser', function ($rootScope, $browser) {
+ var cookies = {},
+ lastCookies = {},
+ lastBrowserCookies,
+ runEval = false,
+ copy = angular.copy,
+ isUndefined = angular.isUndefined;
+
+ //creates a poller fn that copies all cookies from the $browser to service & inits the service
+ $browser.addPollFn(function() {
+ var currentCookies = $browser.cookies();
+ if (lastBrowserCookies != currentCookies) { //relies on browser.cookies() impl
+ lastBrowserCookies = currentCookies;
+ copy(currentCookies, lastCookies);
+ copy(currentCookies, cookies);
+ if (runEval) $rootScope.$apply();
+ }
+ })();
+
+ runEval = true;
+
+ //at the end of each eval, push cookies
+ //TODO: this should happen before the "delayed" watches fire, because if some cookies are not
+ // strings or browser refuses to store some cookies, we update the model in the push fn.
+ $rootScope.$watch(push);
+
+ return cookies;
+
+
+ /**
+ * Pushes all the cookies from the service to the browser and verifies if all cookies were
+ * stored.
+ */
+ function push() {
+ var name,
+ value,
+ browserCookies,
+ updated;
+
+ //delete any cookies deleted in $cookies
+ for (name in lastCookies) {
+ if (isUndefined(cookies[name])) {
+ $browser.cookies(name, undefined);
+ }
+ }
+
+ //update all cookies updated in $cookies
+ for(name in cookies) {
+ value = cookies[name];
+ if (!angular.isString(value)) {
+ if (angular.isDefined(lastCookies[name])) {
+ cookies[name] = lastCookies[name];
+ } else {
+ delete cookies[name];
+ }
+ } else if (value !== lastCookies[name]) {
+ $browser.cookies(name, value);
+ updated = true;
+ }
+ }
+
+ //verify what was actually stored
+ if (updated){
+ updated = false;
+ browserCookies = $browser.cookies();
+
+ for (name in cookies) {
+ if (cookies[name] !== browserCookies[name]) {
+ //delete or reset all cookies that the browser dropped from $cookies
+ if (isUndefined(browserCookies[name])) {
+ delete cookies[name];
+ } else {
+ cookies[name] = browserCookies[name];
+ }
+ updated = true;
+ }
+ }
+ }
+ }
+ }]).
+
+
+ /**
+ * @ngdoc object
+ * @name ngCookies.$cookieStore
+ * @requires $cookies
+ *
+ * @description
+ * Provides a key-value (string-object) storage, that is backed by session cookies.
+ * Objects put or retrieved from this storage are automatically serialized or
+ * deserialized by angular's toJson/fromJson.
+ *
+ * Requires the {@link ngCookies `ngCookies`} module to be installed.
+ *
+ * @example
+ */
+ factory('$cookieStore', ['$cookies', function($cookies) {
+
+ return {
+ /**
+ * @ngdoc method
+ * @name ngCookies.$cookieStore#get
+ * @methodOf ngCookies.$cookieStore
+ *
+ * @description
+ * Returns the value of given cookie key
+ *
+ * @param {string} key Id to use for lookup.
+ * @returns {Object} Deserialized cookie value.
+ */
+ get: function(key) {
+ var value = $cookies[key];
+ return value ? angular.fromJson(value) : value;
+ },
+
+ /**
+ * @ngdoc method
+ * @name ngCookies.$cookieStore#put
+ * @methodOf ngCookies.$cookieStore
+ *
+ * @description
+ * Sets a value for given cookie key
+ *
+ * @param {string} key Id for the `value`.
+ * @param {Object} value Value to be stored.
+ */
+ put: function(key, value) {
+ $cookies[key] = angular.toJson(value);
+ },
+
+ /**
+ * @ngdoc method
+ * @name ngCookies.$cookieStore#remove
+ * @methodOf ngCookies.$cookieStore
+ *
+ * @description
+ * Remove given cookie
+ *
+ * @param {string} key Id of the key-value pair to delete.
+ */
+ remove: function(key) {
+ delete $cookies[key];
+ }
+ };
+
+ }]);
+
+
+})(window, window.angular);
diff --git a/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-cookies.min.js b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-cookies.min.js
new file mode 100644
index 0000000..3404bb4
--- /dev/null
+++ b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-cookies.min.js
@@ -0,0 +1,8 @@
+/*
+ AngularJS v1.2.2
+ (c) 2010-2012 Google, Inc. http://angularjs.org
+ License: MIT
+*/
+(function(p,f,n){'use strict';f.module("ngCookies",["ng"]).factory("$cookies",["$rootScope","$browser",function(d,b){var c={},g={},h,k=!1,l=f.copy,m=f.isUndefined;b.addPollFn(function(){var a=b.cookies();h!=a&&(h=a,l(a,g),l(a,c),k&&d.$apply())})();k=!0;d.$watch(function(){var a,e,d;for(a in g)m(c[a])&&b.cookies(a,n);for(a in c)(e=c[a],f.isString(e))?e!==g[a]&&(b.cookies(a,e),d=!0):f.isDefined(g[a])?c[a]=g[a]:delete c[a];if(d)for(a in e=b.cookies(),c)c[a]!==e[a]&&(m(e[a])?delete c[a]:c[a]=e[a])});
+return c}]).factory("$cookieStore",["$cookies",function(d){return{get:function(b){return(b=d[b])?f.fromJson(b):b},put:function(b,c){d[b]=f.toJson(c)},remove:function(b){delete d[b]}}}])})(window,window.angular);
+//# sourceMappingURL=angular-cookies.min.js.map
diff --git a/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-cookies.min.js.map b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-cookies.min.js.map
new file mode 100644
index 0000000..a7fd1e9
--- /dev/null
+++ b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-cookies.min.js.map
@@ -0,0 +1,8 @@
+{
+"version":3,
+"file":"angular-cookies.min.js",
+"lineCount":7,
+"mappings":"A;;;;;aAKC,SAAQ,CAACA,CAAD,CAASC,CAAT,CAAkBC,CAAlB,CAA6B,CAoBtCD,CAAAE,OAAA,CAAe,WAAf,CAA4B,CAAC,IAAD,CAA5B,CAAAC,QAAA,CA4BW,UA5BX,CA4BuB,CAAC,YAAD,CAAe,UAAf,CAA2B,QAAS,CAACC,CAAD,CAAaC,CAAb,CAAuB,CAAA,IACxEC,EAAU,EAD8D,CAExEC,EAAc,EAF0D,CAGxEC,CAHwE,CAIxEC,EAAU,CAAA,CAJ8D,CAKxEC,EAAOV,CAAAU,KALiE,CAMxEC,EAAcX,CAAAW,YAGlBN,EAAAO,UAAA,CAAmB,QAAQ,EAAG,CAC5B,IAAIC,EAAiBR,CAAAC,QAAA,EACjBE,EAAJ,EAA0BK,CAA1B,GACEL,CAGA,CAHqBK,CAGrB,CAFAH,CAAA,CAAKG,CAAL,CAAqBN,CAArB,CAEA,CADAG,CAAA,CAAKG,CAAL,CAAqBP,CAArB,CACA,CAAIG,CAAJ,EAAaL,CAAAU,OAAA,EAJf,CAF4B,CAA9B,CAAA,EAUAL,EAAA,CAAU,CAAA,CAKVL,EAAAW,OAAA,CASAC,QAAa,EAAG,CAAA,IACVC,CADU,CAEVC,CAFU,CAIVC,CAGJ,KAAKF,CAAL,GAAaV,EAAb,CACMI,CAAA,CAAYL,CAAA,CAAQW,CAAR,CAAZ,CAAJ,EACEZ,CAAAC,QAAA,CAAiBW,CAAjB,CAAuBhB,CAAvB,CAKJ,KAAIgB,CAAJ,GAAYX,EAAZ,CAEE,CADAY,CACK,CADGZ,CAAA,CAAQW,CAAR,CACH,CAAAjB,CAAAoB,SAAA,CAAiBF,CAAjB,CAAL,EAMWA,CANX,GAMqBX,CAAA,CAAYU,CAAZ,CANrB,GAOEZ,CAAAC,QAAA,CAAiBW,CAAjB,CAAuBC,CAAvB,CACA,CAAAC,CAAA,CAAU,CAAA,CARZ,EACMnB,CAAAqB,UAAA,CAAkBd,CAAA,CAAYU,CAAZ,CAAlB,CAAJ,CACEX,CAAA,CAAQW,CAAR,CADF,CACkBV,CAAA,CAAYU,CAAZ,CADlB,CAGE,OAAOX,CAAA,CAAQW,CAAR,CASb,IAAIE,CAAJ,CAIE,IAAKF,CAAL,GAFAK,EAEahB,CAFID,CAAAC,QAAA,EAEJA,CAAAA,CAAb,CACMA,CAAA,CAAQW,CAAR,CAAJ,GAAsBK,CAAA,CAAeL,CAAf,CAAtB,GAEMN,CAAA,CAAYW,CAAA,CAAeL,CAAf,CAAZ,CAAJ,CACE,OAAOX,CAAA,CAAQW,CAAR,CADT,CAGEX,CAAA,CAAQW,CAAR,CAHF,CAGkBK,CAAA,CAAeL,CAAf,CALpB,CAlCU,CAThB,CAEA;MAAOX,EA1BqE,CAA3D,CA5BvB,CAAAH,QAAA,CA4HW,cA5HX,CA4H2B,CAAC,UAAD,CAAa,QAAQ,CAACoB,CAAD,CAAW,CAErD,MAAO,KAYAC,QAAQ,CAACC,CAAD,CAAM,CAEjB,MAAO,CADHP,CACG,CADKK,CAAA,CAASE,CAAT,CACL,EAAQzB,CAAA0B,SAAA,CAAiBR,CAAjB,CAAR,CAAkCA,CAFxB,CAZd,KA4BAS,QAAQ,CAACF,CAAD,CAAMP,CAAN,CAAa,CACxBK,CAAA,CAASE,CAAT,CAAA,CAAgBzB,CAAA4B,OAAA,CAAeV,CAAf,CADQ,CA5BrB,QA0CGW,QAAQ,CAACJ,CAAD,CAAM,CACpB,OAAOF,CAAA,CAASE,CAAT,CADa,CA1CjB,CAF8C,CAAhC,CA5H3B,CApBsC,CAArC,CAAA,CAoME1B,MApMF,CAoMUA,MAAAC,QApMV;",
+"sources":["angular-cookies.js"],
+"names":["window","angular","undefined","module","factory","$rootScope","$browser","cookies","lastCookies","lastBrowserCookies","runEval","copy","isUndefined","addPollFn","currentCookies","$apply","$watch","push","name","value","updated","isString","isDefined","browserCookies","$cookies","get","key","fromJson","put","toJson","remove"]
+}
diff --git a/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-csp.css b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-csp.css
new file mode 100644
index 0000000..585878e
--- /dev/null
+++ b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-csp.css
@@ -0,0 +1,24 @@
+/* Include this file in your html if you are using the CSP mode. */
+
+@charset "UTF-8";
+
+[ng\:cloak], [ng-cloak], [data-ng-cloak], [x-ng-cloak],
+.ng-cloak, .x-ng-cloak,
+.ng-hide {
+ display: none !important;
+}
+
+ng\:form {
+ display: block;
+}
+
+/* The styles below ensure that the CSS transition will ALWAYS
+ * animate and close. A nasty bug occurs with CSS transitions where
+ * when the active class isn't set, or if the active class doesn't
+ * contain any styles to transition to, then, if ngAnimate is used,
+ * it will appear as if the webpage is broken due to the forever hanging
+ * animations. The border-spacing (!ie) and zoom (ie) CSS properties are
+ * used below since they trigger a transition without making the browser
+ * animate anything and they're both highly underused CSS properties */
+.ng-animate-start { border-spacing:1px 1px; -ms-zoom:1.0001; }
+.ng-animate-active { border-spacing:0px 0px; -ms-zoom:1; }
diff --git a/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-loader.js b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-loader.js
new file mode 100644
index 0000000..41aa901
--- /dev/null
+++ b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-loader.js
@@ -0,0 +1,410 @@
+/**
+ * @license AngularJS v1.2.2
+ * (c) 2010-2012 Google, Inc. http://angularjs.org
+ * License: MIT
+ */
+
+(function() {'use strict';
+
+/**
+ * @description
+ *
+ * This object provides a utility for producing rich Error messages within
+ * Angular. It can be called as follows:
+ *
+ * var exampleMinErr = minErr('example');
+ * throw exampleMinErr('one', 'This {0} is {1}', foo, bar);
+ *
+ * The above creates an instance of minErr in the example namespace. The
+ * resulting error will have a namespaced error code of example.one. The
+ * resulting error will replace {0} with the value of foo, and {1} with the
+ * value of bar. The object is not restricted in the number of arguments it can
+ * take.
+ *
+ * If fewer arguments are specified than necessary for interpolation, the extra
+ * interpolation markers will be preserved in the final string.
+ *
+ * Since data will be parsed statically during a build step, some restrictions
+ * are applied with respect to how minErr instances are created and called.
+ * Instances should have names of the form namespaceMinErr for a minErr created
+ * using minErr('namespace') . Error codes, namespaces and template strings
+ * should all be static strings, not variables or general expressions.
+ *
+ * @param {string} module The namespace to use for the new minErr instance.
+ * @returns {function(string, string, ...): Error} instance
+ */
+
+function minErr(module) {
+ return function () {
+ var code = arguments[0],
+ prefix = '[' + (module ? module + ':' : '') + code + '] ',
+ template = arguments[1],
+ templateArgs = arguments,
+ stringify = function (obj) {
+ if (typeof obj === 'function') {
+ return obj.toString().replace(/ \{[\s\S]*$/, '');
+ } else if (typeof obj === 'undefined') {
+ return 'undefined';
+ } else if (typeof obj !== 'string') {
+ return JSON.stringify(obj);
+ }
+ return obj;
+ },
+ message, i;
+
+ message = prefix + template.replace(/\{\d+\}/g, function (match) {
+ var index = +match.slice(1, -1), arg;
+
+ if (index + 2 < templateArgs.length) {
+ arg = templateArgs[index + 2];
+ if (typeof arg === 'function') {
+ return arg.toString().replace(/ ?\{[\s\S]*$/, '');
+ } else if (typeof arg === 'undefined') {
+ return 'undefined';
+ } else if (typeof arg !== 'string') {
+ return toJson(arg);
+ }
+ return arg;
+ }
+ return match;
+ });
+
+ message = message + '\nhttp://errors.angularjs.org/1.2.2/' +
+ (module ? module + '/' : '') + code;
+ for (i = 2; i < arguments.length; i++) {
+ message = message + (i == 2 ? '?' : '&') + 'p' + (i-2) + '=' +
+ encodeURIComponent(stringify(arguments[i]));
+ }
+
+ return new Error(message);
+ };
+}
+
+/**
+ * @ngdoc interface
+ * @name angular.Module
+ * @description
+ *
+ * Interface for configuring angular {@link angular.module modules}.
+ */
+
+function setupModuleLoader(window) {
+
+ var $injectorMinErr = minErr('$injector');
+ var ngMinErr = minErr('ng');
+
+ function ensure(obj, name, factory) {
+ return obj[name] || (obj[name] = factory());
+ }
+
+ var angular = ensure(window, 'angular', Object);
+
+ // We need to expose `angular.$$minErr` to modules such as `ngResource` that reference it during bootstrap
+ angular.$$minErr = angular.$$minErr || minErr;
+
+ return ensure(angular, 'module', function() {
+ /** @type {Object.} */
+ var modules = {};
+
+ /**
+ * @ngdoc function
+ * @name angular.module
+ * @description
+ *
+ * The `angular.module` is a global place for creating, registering and retrieving Angular
+ * modules.
+ * All modules (angular core or 3rd party) that should be available to an application must be
+ * registered using this mechanism.
+ *
+ * When passed two or more arguments, a new module is created. If passed only one argument, an
+ * existing module (the name passed as the first argument to `module`) is retrieved.
+ *
+ *
+ * # Module
+ *
+ * A module is a collection of services, directives, filters, and configuration information.
+ * `angular.module` is used to configure the {@link AUTO.$injector $injector}.
+ *
+ *
+ * // Create a new module
+ * var myModule = angular.module('myModule', []);
+ *
+ * // register a new service
+ * myModule.value('appName', 'MyCoolApp');
+ *
+ * // configure existing services inside initialization blocks.
+ * myModule.config(function($locationProvider) {
+ * // Configure existing providers
+ * $locationProvider.hashPrefix('!');
+ * });
+ *
+ *
+ * Then you can create an injector and load your modules like this:
+ *
+ *
+ * var injector = angular.injector(['ng', 'MyModule'])
+ *
+ *
+ * However it's more likely that you'll just use
+ * {@link ng.directive:ngApp ngApp} or
+ * {@link angular.bootstrap} to simplify this process for you.
+ *
+ * @param {!string} name The name of the module to create or retrieve.
+ * @param {Array.=} requires If specified then new module is being created. If
+ * unspecified then the the module is being retrieved for further configuration.
+ * @param {Function} configFn Optional configuration function for the module. Same as
+ * {@link angular.Module#methods_config Module#config()}.
+ * @returns {module} new module with the {@link angular.Module} api.
+ */
+ return function module(name, requires, configFn) {
+ var assertNotHasOwnProperty = function(name, context) {
+ if (name === 'hasOwnProperty') {
+ throw ngMinErr('badname', 'hasOwnProperty is not a valid {0} name', context);
+ }
+ };
+
+ assertNotHasOwnProperty(name, 'module');
+ if (requires && modules.hasOwnProperty(name)) {
+ modules[name] = null;
+ }
+ return ensure(modules, name, function() {
+ if (!requires) {
+ throw $injectorMinErr('nomod', "Module '{0}' is not available! You either misspelled " +
+ "the module name or forgot to load it. If registering a module ensure that you " +
+ "specify the dependencies as the second argument.", name);
+ }
+
+ /** @type {!Array.>} */
+ var invokeQueue = [];
+
+ /** @type {!Array.} */
+ var runBlocks = [];
+
+ var config = invokeLater('$injector', 'invoke');
+
+ /** @type {angular.Module} */
+ var moduleInstance = {
+ // Private state
+ _invokeQueue: invokeQueue,
+ _runBlocks: runBlocks,
+
+ /**
+ * @ngdoc property
+ * @name angular.Module#requires
+ * @propertyOf angular.Module
+ * @returns {Array.} List of module names which must be loaded before this module.
+ * @description
+ * Holds the list of modules which the injector will load before the current module is
+ * loaded.
+ */
+ requires: requires,
+
+ /**
+ * @ngdoc property
+ * @name angular.Module#name
+ * @propertyOf angular.Module
+ * @returns {string} Name of the module.
+ * @description
+ */
+ name: name,
+
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#provider
+ * @methodOf angular.Module
+ * @param {string} name service name
+ * @param {Function} providerType Construction function for creating new instance of the
+ * service.
+ * @description
+ * See {@link AUTO.$provide#provider $provide.provider()}.
+ */
+ provider: invokeLater('$provide', 'provider'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#factory
+ * @methodOf angular.Module
+ * @param {string} name service name
+ * @param {Function} providerFunction Function for creating new instance of the service.
+ * @description
+ * See {@link AUTO.$provide#factory $provide.factory()}.
+ */
+ factory: invokeLater('$provide', 'factory'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#service
+ * @methodOf angular.Module
+ * @param {string} name service name
+ * @param {Function} constructor A constructor function that will be instantiated.
+ * @description
+ * See {@link AUTO.$provide#service $provide.service()}.
+ */
+ service: invokeLater('$provide', 'service'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#value
+ * @methodOf angular.Module
+ * @param {string} name service name
+ * @param {*} object Service instance object.
+ * @description
+ * See {@link AUTO.$provide#value $provide.value()}.
+ */
+ value: invokeLater('$provide', 'value'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#constant
+ * @methodOf angular.Module
+ * @param {string} name constant name
+ * @param {*} object Constant value.
+ * @description
+ * Because the constant are fixed, they get applied before other provide methods.
+ * See {@link AUTO.$provide#constant $provide.constant()}.
+ */
+ constant: invokeLater('$provide', 'constant', 'unshift'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#animation
+ * @methodOf angular.Module
+ * @param {string} name animation name
+ * @param {Function} animationFactory Factory function for creating new instance of an
+ * animation.
+ * @description
+ *
+ * **NOTE**: animations take effect only if the **ngAnimate** module is loaded.
+ *
+ *
+ * Defines an animation hook that can be later used with
+ * {@link ngAnimate.$animate $animate} service and directives that use this service.
+ *
+ *
+ * module.animation('.animation-name', function($inject1, $inject2) {
+ * return {
+ * eventName : function(element, done) {
+ * //code to run the animation
+ * //once complete, then run done()
+ * return function cancellationFunction(element) {
+ * //code to cancel the animation
+ * }
+ * }
+ * }
+ * })
+ *
+ *
+ * See {@link ngAnimate.$animateProvider#register $animateProvider.register()} and
+ * {@link ngAnimate ngAnimate module} for more information.
+ */
+ animation: invokeLater('$animateProvider', 'register'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#filter
+ * @methodOf angular.Module
+ * @param {string} name Filter name.
+ * @param {Function} filterFactory Factory function for creating new instance of filter.
+ * @description
+ * See {@link ng.$filterProvider#register $filterProvider.register()}.
+ */
+ filter: invokeLater('$filterProvider', 'register'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#controller
+ * @methodOf angular.Module
+ * @param {string|Object} name Controller name, or an object map of controllers where the
+ * keys are the names and the values are the constructors.
+ * @param {Function} constructor Controller constructor function.
+ * @description
+ * See {@link ng.$controllerProvider#register $controllerProvider.register()}.
+ */
+ controller: invokeLater('$controllerProvider', 'register'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#directive
+ * @methodOf angular.Module
+ * @param {string|Object} name Directive name, or an object map of directives where the
+ * keys are the names and the values are the factories.
+ * @param {Function} directiveFactory Factory function for creating new instance of
+ * directives.
+ * @description
+ * See {@link ng.$compileProvider#methods_directive $compileProvider.directive()}.
+ */
+ directive: invokeLater('$compileProvider', 'directive'),
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#config
+ * @methodOf angular.Module
+ * @param {Function} configFn Execute this function on module load. Useful for service
+ * configuration.
+ * @description
+ * Use this method to register work which needs to be performed on module loading.
+ */
+ config: config,
+
+ /**
+ * @ngdoc method
+ * @name angular.Module#run
+ * @methodOf angular.Module
+ * @param {Function} initializationFn Execute this function after injector creation.
+ * Useful for application initialization.
+ * @description
+ * Use this method to register work which should be performed when the injector is done
+ * loading all modules.
+ */
+ run: function(block) {
+ runBlocks.push(block);
+ return this;
+ }
+ };
+
+ if (configFn) {
+ config(configFn);
+ }
+
+ return moduleInstance;
+
+ /**
+ * @param {string} provider
+ * @param {string} method
+ * @param {String=} insertMethod
+ * @returns {angular.Module}
+ */
+ function invokeLater(provider, method, insertMethod) {
+ return function() {
+ invokeQueue[insertMethod || 'push']([provider, method, arguments]);
+ return moduleInstance;
+ };
+ }
+ });
+ };
+ });
+
+}
+
+setupModuleLoader(window);
+})(window);
+
+/**
+ * Closure compiler type information
+ *
+ * @typedef { {
+ * requires: !Array.,
+ * invokeQueue: !Array.>,
+ *
+ * service: function(string, Function):angular.Module,
+ * factory: function(string, Function):angular.Module,
+ * value: function(string, *):angular.Module,
+ *
+ * filter: function(string, Function):angular.Module,
+ *
+ * init: function(Function):angular.Module
+ * } }
+ */
+angular.Module;
+
diff --git a/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-loader.min.js b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-loader.min.js
new file mode 100644
index 0000000..bb5dff9
--- /dev/null
+++ b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-loader.min.js
@@ -0,0 +1,9 @@
+/*
+ AngularJS v1.2.2
+ (c) 2010-2012 Google, Inc. http://angularjs.org
+ License: MIT
+*/
+(function(){'use strict';function d(a){return function(){var c=arguments[0],b,c="["+(a?a+":":"")+c+"] http://errors.angularjs.org/1.2.2/"+(a?a+"/":"")+c;for(b=1;b
+ * describe('$exceptionHandlerProvider', function() {
+ *
+ * it('should capture log messages and exceptions', function() {
+ *
+ * module(function($exceptionHandlerProvider) {
+ * $exceptionHandlerProvider.mode('log');
+ * });
+ *
+ * inject(function($log, $exceptionHandler, $timeout) {
+ * $timeout(function() { $log.log(1); });
+ * $timeout(function() { $log.log(2); throw 'banana peel'; });
+ * $timeout(function() { $log.log(3); });
+ * expect($exceptionHandler.errors).toEqual([]);
+ * expect($log.assertEmpty());
+ * $timeout.flush();
+ * expect($exceptionHandler.errors).toEqual(['banana peel']);
+ * expect($log.log.logs).toEqual([[1], [2], [3]]);
+ * });
+ * });
+ * });
+ *
+ */
+
+angular.mock.$ExceptionHandlerProvider = function() {
+ var handler;
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$exceptionHandlerProvider#mode
+ * @methodOf ngMock.$exceptionHandlerProvider
+ *
+ * @description
+ * Sets the logging mode.
+ *
+ * @param {string} mode Mode of operation, defaults to `rethrow`.
+ *
+ * - `rethrow`: If any errors are passed into the handler in tests, it typically
+ * means that there is a bug in the application or test, so this mock will
+ * make these tests fail.
+ * - `log`: Sometimes it is desirable to test that an error is thrown, for this case the `log`
+ * mode stores an array of errors in `$exceptionHandler.errors`, to allow later
+ * assertion of them. See {@link ngMock.$log#assertEmpty assertEmpty()} and
+ * {@link ngMock.$log#reset reset()}
+ */
+ this.mode = function(mode) {
+ switch(mode) {
+ case 'rethrow':
+ handler = function(e) {
+ throw e;
+ };
+ break;
+ case 'log':
+ var errors = [];
+
+ handler = function(e) {
+ if (arguments.length == 1) {
+ errors.push(e);
+ } else {
+ errors.push([].slice.call(arguments, 0));
+ }
+ };
+
+ handler.errors = errors;
+ break;
+ default:
+ throw new Error("Unknown mode '" + mode + "', only 'log'/'rethrow' modes are allowed!");
+ }
+ };
+
+ this.$get = function() {
+ return handler;
+ };
+
+ this.mode('rethrow');
+};
+
+
+/**
+ * @ngdoc service
+ * @name ngMock.$log
+ *
+ * @description
+ * Mock implementation of {@link ng.$log} that gathers all logged messages in arrays
+ * (one array per logging level). These arrays are exposed as `logs` property of each of the
+ * level-specific log function, e.g. for level `error` the array is exposed as `$log.error.logs`.
+ *
+ */
+angular.mock.$LogProvider = function() {
+ var debug = true;
+
+ function concat(array1, array2, index) {
+ return array1.concat(Array.prototype.slice.call(array2, index));
+ }
+
+ this.debugEnabled = function(flag) {
+ if (angular.isDefined(flag)) {
+ debug = flag;
+ return this;
+ } else {
+ return debug;
+ }
+ };
+
+ this.$get = function () {
+ var $log = {
+ log: function() { $log.log.logs.push(concat([], arguments, 0)); },
+ warn: function() { $log.warn.logs.push(concat([], arguments, 0)); },
+ info: function() { $log.info.logs.push(concat([], arguments, 0)); },
+ error: function() { $log.error.logs.push(concat([], arguments, 0)); },
+ debug: function() {
+ if (debug) {
+ $log.debug.logs.push(concat([], arguments, 0));
+ }
+ }
+ };
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$log#reset
+ * @methodOf ngMock.$log
+ *
+ * @description
+ * Reset all of the logging arrays to empty.
+ */
+ $log.reset = function () {
+ /**
+ * @ngdoc property
+ * @name ngMock.$log#log.logs
+ * @propertyOf ngMock.$log
+ *
+ * @description
+ * Array of messages logged using {@link ngMock.$log#log}.
+ *
+ * @example
+ *
+ * $log.log('Some Log');
+ * var first = $log.log.logs.unshift();
+ *
+ * $log.debug('Some Error');
+ * var first = $log.debug.logs.unshift();
+ *
+ */
+ $log.debug.logs = [];
+ };
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$log#assertEmpty
+ * @methodOf ngMock.$log
+ *
+ * @description
+ * Assert that the all of the logging methods have no logged messages. If messages present, an
+ * exception is thrown.
+ */
+ $log.assertEmpty = function() {
+ var errors = [];
+ angular.forEach(['error', 'warn', 'info', 'log', 'debug'], function(logLevel) {
+ angular.forEach($log[logLevel].logs, function(log) {
+ angular.forEach(log, function (logItem) {
+ errors.push('MOCK $log (' + logLevel + '): ' + String(logItem) + '\n' +
+ (logItem.stack || ''));
+ });
+ });
+ });
+ if (errors.length) {
+ errors.unshift("Expected $log to be empty! Either a message was logged unexpectedly, or "+
+ "an expected log message was not checked and removed:");
+ errors.push('');
+ throw new Error(errors.join('\n---------\n'));
+ }
+ };
+
+ $log.reset();
+ return $log;
+ };
+};
+
+
+/**
+ * @ngdoc service
+ * @name ngMock.$interval
+ *
+ * @description
+ * Mock implementation of the $interval service.
+ *
+ * Use {@link ngMock.$interval#methods_flush `$interval.flush(millis)`} to
+ * move forward by `millis` milliseconds and trigger any functions scheduled to run in that
+ * time.
+ *
+ * @param {function()} fn A function that should be called repeatedly.
+ * @param {number} delay Number of milliseconds between each function call.
+ * @param {number=} [count=0] Number of times to repeat. If not set, or 0, will repeat
+ * indefinitely.
+ * @param {boolean=} [invokeApply=true] If set to `false` skips model dirty checking, otherwise
+ * will invoke `fn` within the {@link ng.$rootScope.Scope#methods_$apply $apply} block.
+ * @returns {promise} A promise which will be notified on each iteration.
+ */
+angular.mock.$IntervalProvider = function() {
+ this.$get = ['$rootScope', '$q',
+ function($rootScope, $q) {
+ var repeatFns = [],
+ nextRepeatId = 0,
+ now = 0;
+
+ var $interval = function(fn, delay, count, invokeApply) {
+ var deferred = $q.defer(),
+ promise = deferred.promise,
+ iteration = 0,
+ skipApply = (angular.isDefined(invokeApply) && !invokeApply);
+
+ count = (angular.isDefined(count)) ? count : 0,
+ promise.then(null, null, fn);
+
+ promise.$$intervalId = nextRepeatId;
+
+ function tick() {
+ deferred.notify(iteration++);
+
+ if (count > 0 && iteration >= count) {
+ var fnIndex;
+ deferred.resolve(iteration);
+
+ angular.forEach(repeatFns, function(fn, index) {
+ if (fn.id === promise.$$intervalId) fnIndex = index;
+ });
+
+ if (fnIndex !== undefined) {
+ repeatFns.splice(fnIndex, 1);
+ }
+ }
+
+ if (!skipApply) $rootScope.$apply();
+ }
+
+ repeatFns.push({
+ nextTime:(now + delay),
+ delay: delay,
+ fn: tick,
+ id: nextRepeatId,
+ deferred: deferred
+ });
+ repeatFns.sort(function(a,b){ return a.nextTime - b.nextTime;});
+
+ nextRepeatId++;
+ return promise;
+ };
+
+ $interval.cancel = function(promise) {
+ var fnIndex;
+
+ angular.forEach(repeatFns, function(fn, index) {
+ if (fn.id === promise.$$intervalId) fnIndex = index;
+ });
+
+ if (fnIndex !== undefined) {
+ repeatFns[fnIndex].deferred.reject('canceled');
+ repeatFns.splice(fnIndex, 1);
+ return true;
+ }
+
+ return false;
+ };
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$interval#flush
+ * @methodOf ngMock.$interval
+ * @description
+ *
+ * Runs interval tasks scheduled to be run in the next `millis` milliseconds.
+ *
+ * @param {number=} millis maximum timeout amount to flush up until.
+ *
+ * @return {number} The amount of time moved forward.
+ */
+ $interval.flush = function(millis) {
+ now += millis;
+ while (repeatFns.length && repeatFns[0].nextTime <= now) {
+ var task = repeatFns[0];
+ task.fn();
+ task.nextTime += task.delay;
+ repeatFns.sort(function(a,b){ return a.nextTime - b.nextTime;});
+ }
+ return millis;
+ };
+
+ return $interval;
+ }];
+};
+
+
+/* jshint -W101 */
+/* The R_ISO8061_STR regex is never going to fit into the 100 char limit!
+ * This directive should go inside the anonymous function but a bug in JSHint means that it would
+ * not be enacted early enough to prevent the warning.
+ */
+(function() {
+ var R_ISO8061_STR = /^(\d{4})-?(\d\d)-?(\d\d)(?:T(\d\d)(?:\:?(\d\d)(?:\:?(\d\d)(?:\.(\d{3}))?)?)?(Z|([+-])(\d\d):?(\d\d)))?$/;
+
+ function jsonStringToDate(string) {
+ var match;
+ if (match = string.match(R_ISO8061_STR)) {
+ var date = new Date(0),
+ tzHour = 0,
+ tzMin = 0;
+ if (match[9]) {
+ tzHour = int(match[9] + match[10]);
+ tzMin = int(match[9] + match[11]);
+ }
+ date.setUTCFullYear(int(match[1]), int(match[2]) - 1, int(match[3]));
+ date.setUTCHours(int(match[4]||0) - tzHour,
+ int(match[5]||0) - tzMin,
+ int(match[6]||0),
+ int(match[7]||0));
+ return date;
+ }
+ return string;
+ }
+
+ function int(str) {
+ return parseInt(str, 10);
+ }
+
+ function padNumber(num, digits, trim) {
+ var neg = '';
+ if (num < 0) {
+ neg = '-';
+ num = -num;
+ }
+ num = '' + num;
+ while(num.length < digits) num = '0' + num;
+ if (trim)
+ num = num.substr(num.length - digits);
+ return neg + num;
+ }
+
+
+ /**
+ * @ngdoc object
+ * @name angular.mock.TzDate
+ * @description
+ *
+ * *NOTE*: this is not an injectable instance, just a globally available mock class of `Date`.
+ *
+ * Mock of the Date type which has its timezone specified via constructor arg.
+ *
+ * The main purpose is to create Date-like instances with timezone fixed to the specified timezone
+ * offset, so that we can test code that depends on local timezone settings without dependency on
+ * the time zone settings of the machine where the code is running.
+ *
+ * @param {number} offset Offset of the *desired* timezone in hours (fractions will be honored)
+ * @param {(number|string)} timestamp Timestamp representing the desired time in *UTC*
+ *
+ * @example
+ * !!!! WARNING !!!!!
+ * This is not a complete Date object so only methods that were implemented can be called safely.
+ * To make matters worse, TzDate instances inherit stuff from Date via a prototype.
+ *
+ * We do our best to intercept calls to "unimplemented" methods, but since the list of methods is
+ * incomplete we might be missing some non-standard methods. This can result in errors like:
+ * "Date.prototype.foo called on incompatible Object".
+ *
+ *
+ *
+ */
+ angular.mock.TzDate = function (offset, timestamp) {
+ var self = new Date(0);
+ if (angular.isString(timestamp)) {
+ var tsStr = timestamp;
+
+ self.origDate = jsonStringToDate(timestamp);
+
+ timestamp = self.origDate.getTime();
+ if (isNaN(timestamp))
+ throw {
+ name: "Illegal Argument",
+ message: "Arg '" + tsStr + "' passed into TzDate constructor is not a valid date string"
+ };
+ } else {
+ self.origDate = new Date(timestamp);
+ }
+
+ var localOffset = new Date(timestamp).getTimezoneOffset();
+ self.offsetDiff = localOffset*60*1000 - offset*1000*60*60;
+ self.date = new Date(timestamp + self.offsetDiff);
+
+ self.getTime = function() {
+ return self.date.getTime() - self.offsetDiff;
+ };
+
+ self.toLocaleDateString = function() {
+ return self.date.toLocaleDateString();
+ };
+
+ self.getFullYear = function() {
+ return self.date.getFullYear();
+ };
+
+ self.getMonth = function() {
+ return self.date.getMonth();
+ };
+
+ self.getDate = function() {
+ return self.date.getDate();
+ };
+
+ self.getHours = function() {
+ return self.date.getHours();
+ };
+
+ self.getMinutes = function() {
+ return self.date.getMinutes();
+ };
+
+ self.getSeconds = function() {
+ return self.date.getSeconds();
+ };
+
+ self.getMilliseconds = function() {
+ return self.date.getMilliseconds();
+ };
+
+ self.getTimezoneOffset = function() {
+ return offset * 60;
+ };
+
+ self.getUTCFullYear = function() {
+ return self.origDate.getUTCFullYear();
+ };
+
+ self.getUTCMonth = function() {
+ return self.origDate.getUTCMonth();
+ };
+
+ self.getUTCDate = function() {
+ return self.origDate.getUTCDate();
+ };
+
+ self.getUTCHours = function() {
+ return self.origDate.getUTCHours();
+ };
+
+ self.getUTCMinutes = function() {
+ return self.origDate.getUTCMinutes();
+ };
+
+ self.getUTCSeconds = function() {
+ return self.origDate.getUTCSeconds();
+ };
+
+ self.getUTCMilliseconds = function() {
+ return self.origDate.getUTCMilliseconds();
+ };
+
+ self.getDay = function() {
+ return self.date.getDay();
+ };
+
+ // provide this method only on browsers that already have it
+ if (self.toISOString) {
+ self.toISOString = function() {
+ return padNumber(self.origDate.getUTCFullYear(), 4) + '-' +
+ padNumber(self.origDate.getUTCMonth() + 1, 2) + '-' +
+ padNumber(self.origDate.getUTCDate(), 2) + 'T' +
+ padNumber(self.origDate.getUTCHours(), 2) + ':' +
+ padNumber(self.origDate.getUTCMinutes(), 2) + ':' +
+ padNumber(self.origDate.getUTCSeconds(), 2) + '.' +
+ padNumber(self.origDate.getUTCMilliseconds(), 3) + 'Z';
+ };
+ }
+
+ //hide all methods not implemented in this mock that the Date prototype exposes
+ var unimplementedMethods = ['getUTCDay',
+ 'getYear', 'setDate', 'setFullYear', 'setHours', 'setMilliseconds',
+ 'setMinutes', 'setMonth', 'setSeconds', 'setTime', 'setUTCDate', 'setUTCFullYear',
+ 'setUTCHours', 'setUTCMilliseconds', 'setUTCMinutes', 'setUTCMonth', 'setUTCSeconds',
+ 'setYear', 'toDateString', 'toGMTString', 'toJSON', 'toLocaleFormat', 'toLocaleString',
+ 'toLocaleTimeString', 'toSource', 'toString', 'toTimeString', 'toUTCString', 'valueOf'];
+
+ angular.forEach(unimplementedMethods, function(methodName) {
+ self[methodName] = function() {
+ throw new Error("Method '" + methodName + "' is not implemented in the TzDate mock");
+ };
+ });
+
+ return self;
+ };
+
+ //make "tzDateInstance instanceof Date" return true
+ angular.mock.TzDate.prototype = Date.prototype;
+})();
+/* jshint +W101 */
+
+angular.mock.animate = angular.module('mock.animate', ['ng'])
+
+ .config(['$provide', function($provide) {
+
+ $provide.decorator('$animate', function($delegate) {
+ var animate = {
+ queue : [],
+ enabled : $delegate.enabled,
+ flushNext : function(name) {
+ var tick = animate.queue.shift();
+
+ if (!tick) throw new Error('No animation to be flushed');
+ if(tick.method !== name) {
+ throw new Error('The next animation is not "' + name +
+ '", but is "' + tick.method + '"');
+ }
+ tick.fn();
+ return tick;
+ }
+ };
+
+ angular.forEach(['enter','leave','move','addClass','removeClass'], function(method) {
+ animate[method] = function() {
+ var params = arguments;
+ animate.queue.push({
+ method : method,
+ params : params,
+ element : angular.isElement(params[0]) && params[0],
+ parent : angular.isElement(params[1]) && params[1],
+ after : angular.isElement(params[2]) && params[2],
+ fn : function() {
+ $delegate[method].apply($delegate, params);
+ }
+ });
+ };
+ });
+
+ return animate;
+ });
+
+ }]);
+
+
+/**
+ * @ngdoc function
+ * @name angular.mock.dump
+ * @description
+ *
+ * *NOTE*: this is not an injectable instance, just a globally available function.
+ *
+ * Method for serializing common angular objects (scope, elements, etc..) into strings, useful for
+ * debugging.
+ *
+ * This method is also available on window, where it can be used to display objects on debug
+ * console.
+ *
+ * @param {*} object - any object to turn into string.
+ * @return {string} a serialized string of the argument
+ */
+angular.mock.dump = function(object) {
+ return serialize(object);
+
+ function serialize(object) {
+ var out;
+
+ if (angular.isElement(object)) {
+ object = angular.element(object);
+ out = angular.element('');
+ angular.forEach(object, function(element) {
+ out.append(angular.element(element).clone());
+ });
+ out = out.html();
+ } else if (angular.isArray(object)) {
+ out = [];
+ angular.forEach(object, function(o) {
+ out.push(serialize(o));
+ });
+ out = '[ ' + out.join(', ') + ' ]';
+ } else if (angular.isObject(object)) {
+ if (angular.isFunction(object.$eval) && angular.isFunction(object.$apply)) {
+ out = serializeScope(object);
+ } else if (object instanceof Error) {
+ out = object.stack || ('' + object.name + ': ' + object.message);
+ } else {
+ // TODO(i): this prevents methods being logged,
+ // we should have a better way to serialize objects
+ out = angular.toJson(object, true);
+ }
+ } else {
+ out = String(object);
+ }
+
+ return out;
+ }
+
+ function serializeScope(scope, offset) {
+ offset = offset || ' ';
+ var log = [offset + 'Scope(' + scope.$id + '): {'];
+ for ( var key in scope ) {
+ if (Object.prototype.hasOwnProperty.call(scope, key) && !key.match(/^(\$|this)/)) {
+ log.push(' ' + key + ': ' + angular.toJson(scope[key]));
+ }
+ }
+ var child = scope.$$childHead;
+ while(child) {
+ log.push(serializeScope(child, offset + ' '));
+ child = child.$$nextSibling;
+ }
+ log.push('}');
+ return log.join('\n' + offset);
+ }
+};
+
+/**
+ * @ngdoc object
+ * @name ngMock.$httpBackend
+ * @description
+ * Fake HTTP backend implementation suitable for unit testing applications that use the
+ * {@link ng.$http $http service}.
+ *
+ * *Note*: For fake HTTP backend implementation suitable for end-to-end testing or backend-less
+ * development please see {@link ngMockE2E.$httpBackend e2e $httpBackend mock}.
+ *
+ * During unit testing, we want our unit tests to run quickly and have no external dependencies so
+ * we don’t want to send {@link https://developer.mozilla.org/en/xmlhttprequest XHR} or
+ * {@link http://en.wikipedia.org/wiki/JSONP JSONP} requests to a real server. All we really need is
+ * to verify whether a certain request has been sent or not, or alternatively just let the
+ * application make requests, respond with pre-trained responses and assert that the end result is
+ * what we expect it to be.
+ *
+ * This mock implementation can be used to respond with static or dynamic responses via the
+ * `expect` and `when` apis and their shortcuts (`expectGET`, `whenPOST`, etc).
+ *
+ * When an Angular application needs some data from a server, it calls the $http service, which
+ * sends the request to a real server using $httpBackend service. With dependency injection, it is
+ * easy to inject $httpBackend mock (which has the same API as $httpBackend) and use it to verify
+ * the requests and respond with some testing data without sending a request to real server.
+ *
+ * There are two ways to specify what test data should be returned as http responses by the mock
+ * backend when the code under test makes http requests:
+ *
+ * - `$httpBackend.expect` - specifies a request expectation
+ * - `$httpBackend.when` - specifies a backend definition
+ *
+ *
+ * # Request Expectations vs Backend Definitions
+ *
+ * Request expectations provide a way to make assertions about requests made by the application and
+ * to define responses for those requests. The test will fail if the expected requests are not made
+ * or they are made in the wrong order.
+ *
+ * Backend definitions allow you to define a fake backend for your application which doesn't assert
+ * if a particular request was made or not, it just returns a trained response if a request is made.
+ * The test will pass whether or not the request gets made during testing.
+ *
+ *
+ *
+ *
Request expectations
Backend definitions
+ *
+ *
Syntax
+ *
.expect(...).respond(...)
+ *
.when(...).respond(...)
+ *
+ *
+ *
Typical usage
+ *
strict unit tests
+ *
loose (black-box) unit testing
+ *
+ *
+ *
Fulfills multiple requests
+ *
NO
+ *
YES
+ *
+ *
+ *
Order of requests matters
+ *
YES
+ *
NO
+ *
+ *
+ *
Request required
+ *
YES
+ *
NO
+ *
+ *
+ *
Response required
+ *
optional (see below)
+ *
YES
+ *
+ *
+ *
+ * In cases where both backend definitions and request expectations are specified during unit
+ * testing, the request expectations are evaluated first.
+ *
+ * If a request expectation has no response specified, the algorithm will search your backend
+ * definitions for an appropriate response.
+ *
+ * If a request didn't match any expectation or if the expectation doesn't have the response
+ * defined, the backend definitions are evaluated in sequential order to see if any of them match
+ * the request. The response from the first matched definition is returned.
+ *
+ *
+ * # Flushing HTTP requests
+ *
+ * The $httpBackend used in production, always responds to requests with responses asynchronously.
+ * If we preserved this behavior in unit testing, we'd have to create async unit tests, which are
+ * hard to write, follow and maintain. At the same time the testing mock, can't respond
+ * synchronously because that would change the execution of the code under test. For this reason the
+ * mock $httpBackend has a `flush()` method, which allows the test to explicitly flush pending
+ * requests and thus preserving the async api of the backend, while allowing the test to execute
+ * synchronously.
+ *
+ *
+ * # Unit testing with mock $httpBackend
+ * The following code shows how to setup and use the mock backend in unit testing a controller.
+ * First we create the controller under test
+ *
+
+ *
+ * Now we setup the mock backend and create the test specs.
+ *
+
+ // testing controller
+ describe('MyController', function() {
+ var $httpBackend, $rootScope, createController;
+
+ beforeEach(inject(function($injector) {
+ // Set up the mock http service responses
+ $httpBackend = $injector.get('$httpBackend');
+ // backend definition common for all tests
+ $httpBackend.when('GET', '/auth.py').respond({userId: 'userX'}, {'A-Token': 'xxx'});
+
+ // Get hold of a scope (i.e. the root scope)
+ $rootScope = $injector.get('$rootScope');
+ // The $controller service is used to create instances of controllers
+ var $controller = $injector.get('$controller');
+
+ createController = function() {
+ return $controller('MyController', {'$scope' : $rootScope });
+ };
+ }));
+
+
+ afterEach(function() {
+ $httpBackend.verifyNoOutstandingExpectation();
+ $httpBackend.verifyNoOutstandingRequest();
+ });
+
+
+ it('should fetch authentication token', function() {
+ $httpBackend.expectGET('/auth.py');
+ var controller = createController();
+ $httpBackend.flush();
+ });
+
+
+ it('should send msg to server', function() {
+ var controller = createController();
+ $httpBackend.flush();
+
+ // now you don’t care about the authentication, but
+ // the controller will still send the request and
+ // $httpBackend will respond without you having to
+ // specify the expectation and response for this request
+
+ $httpBackend.expectPOST('/add-msg.py', 'message content').respond(201, '');
+ $rootScope.saveMessage('message content');
+ expect($rootScope.status).toBe('Saving...');
+ $httpBackend.flush();
+ expect($rootScope.status).toBe('');
+ });
+
+
+ it('should send auth header', function() {
+ var controller = createController();
+ $httpBackend.flush();
+
+ $httpBackend.expectPOST('/add-msg.py', undefined, function(headers) {
+ // check if the header was send, if it wasn't the expectation won't
+ // match the request and the test will fail
+ return headers['Authorization'] == 'xxx';
+ }).respond(201, '');
+
+ $rootScope.saveMessage('whatever');
+ $httpBackend.flush();
+ });
+ });
+
+ */
+angular.mock.$HttpBackendProvider = function() {
+ this.$get = ['$rootScope', createHttpBackendMock];
+};
+
+/**
+ * General factory function for $httpBackend mock.
+ * Returns instance for unit testing (when no arguments specified):
+ * - passing through is disabled
+ * - auto flushing is disabled
+ *
+ * Returns instance for e2e testing (when `$delegate` and `$browser` specified):
+ * - passing through (delegating request to real backend) is enabled
+ * - auto flushing is enabled
+ *
+ * @param {Object=} $delegate Real $httpBackend instance (allow passing through if specified)
+ * @param {Object=} $browser Auto-flushing enabled if specified
+ * @return {Object} Instance of $httpBackend mock
+ */
+function createHttpBackendMock($rootScope, $delegate, $browser) {
+ var definitions = [],
+ expectations = [],
+ responses = [],
+ responsesPush = angular.bind(responses, responses.push);
+
+ function createResponse(status, data, headers) {
+ if (angular.isFunction(status)) return status;
+
+ return function() {
+ return angular.isNumber(status)
+ ? [status, data, headers]
+ : [200, status, data];
+ };
+ }
+
+ // TODO(vojta): change params to: method, url, data, headers, callback
+ function $httpBackend(method, url, data, callback, headers, timeout, withCredentials) {
+ var xhr = new MockXhr(),
+ expectation = expectations[0],
+ wasExpected = false;
+
+ function prettyPrint(data) {
+ return (angular.isString(data) || angular.isFunction(data) || data instanceof RegExp)
+ ? data
+ : angular.toJson(data);
+ }
+
+ function wrapResponse(wrapped) {
+ if (!$browser && timeout && timeout.then) timeout.then(handleTimeout);
+
+ return handleResponse;
+
+ function handleResponse() {
+ var response = wrapped.response(method, url, data, headers);
+ xhr.$$respHeaders = response[2];
+ callback(response[0], response[1], xhr.getAllResponseHeaders());
+ }
+
+ function handleTimeout() {
+ for (var i = 0, ii = responses.length; i < ii; i++) {
+ if (responses[i] === handleResponse) {
+ responses.splice(i, 1);
+ callback(-1, undefined, '');
+ break;
+ }
+ }
+ }
+ }
+
+ if (expectation && expectation.match(method, url)) {
+ if (!expectation.matchData(data))
+ throw new Error('Expected ' + expectation + ' with different data\n' +
+ 'EXPECTED: ' + prettyPrint(expectation.data) + '\nGOT: ' + data);
+
+ if (!expectation.matchHeaders(headers))
+ throw new Error('Expected ' + expectation + ' with different headers\n' +
+ 'EXPECTED: ' + prettyPrint(expectation.headers) + '\nGOT: ' +
+ prettyPrint(headers));
+
+ expectations.shift();
+
+ if (expectation.response) {
+ responses.push(wrapResponse(expectation));
+ return;
+ }
+ wasExpected = true;
+ }
+
+ var i = -1, definition;
+ while ((definition = definitions[++i])) {
+ if (definition.match(method, url, data, headers || {})) {
+ if (definition.response) {
+ // if $browser specified, we do auto flush all requests
+ ($browser ? $browser.defer : responsesPush)(wrapResponse(definition));
+ } else if (definition.passThrough) {
+ $delegate(method, url, data, callback, headers, timeout, withCredentials);
+ } else throw new Error('No response defined !');
+ return;
+ }
+ }
+ throw wasExpected ?
+ new Error('No response defined !') :
+ new Error('Unexpected request: ' + method + ' ' + url + '\n' +
+ (expectation ? 'Expected ' + expectation : 'No more request expected'));
+ }
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#when
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new backend definition.
+ *
+ * @param {string} method HTTP method.
+ * @param {string|RegExp} url HTTP url.
+ * @param {(string|RegExp|function(string))=} data HTTP request body or function that receives
+ * data string and returns true if the data is as expected.
+ * @param {(Object|function(Object))=} headers HTTP headers or function that receives http header
+ * object and returns true if the headers match the current definition.
+ * @returns {requestHandler} Returns an object with `respond` method that controls how a matched
+ * request is handled.
+ *
+ * - respond –
+ * `{function([status,] data[, headers])|function(function(method, url, data, headers)}`
+ * – The respond method takes a set of static data to be returned or a function that can return
+ * an array containing response status (number), response data (string) and response headers
+ * (Object).
+ */
+ $httpBackend.when = function(method, url, data, headers) {
+ var definition = new MockHttpExpectation(method, url, data, headers),
+ chain = {
+ respond: function(status, data, headers) {
+ definition.response = createResponse(status, data, headers);
+ }
+ };
+
+ if ($browser) {
+ chain.passThrough = function() {
+ definition.passThrough = true;
+ };
+ }
+
+ definitions.push(definition);
+ return chain;
+ };
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#whenGET
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new backend definition for GET requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(Object|function(Object))=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ */
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#whenHEAD
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new backend definition for HEAD requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(Object|function(Object))=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ */
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#whenDELETE
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new backend definition for DELETE requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(Object|function(Object))=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ */
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#whenPOST
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new backend definition for POST requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(string|RegExp|function(string))=} data HTTP request body or function that receives
+ * data string and returns true if the data is as expected.
+ * @param {(Object|function(Object))=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ */
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#whenPUT
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new backend definition for PUT requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(string|RegExp|function(string))=} data HTTP request body or function that receives
+ * data string and returns true if the data is as expected.
+ * @param {(Object|function(Object))=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ */
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#whenJSONP
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new backend definition for JSONP requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ */
+ createShortMethods('when');
+
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#expect
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new request expectation.
+ *
+ * @param {string} method HTTP method.
+ * @param {string|RegExp} url HTTP url.
+ * @param {(string|RegExp|function(string)|Object)=} data HTTP request body or function that
+ * receives data string and returns true if the data is as expected, or Object if request body
+ * is in JSON format.
+ * @param {(Object|function(Object))=} headers HTTP headers or function that receives http header
+ * object and returns true if the headers match the current expectation.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ *
+ * - respond –
+ * `{function([status,] data[, headers])|function(function(method, url, data, headers)}`
+ * – The respond method takes a set of static data to be returned or a function that can return
+ * an array containing response status (number), response data (string) and response headers
+ * (Object).
+ */
+ $httpBackend.expect = function(method, url, data, headers) {
+ var expectation = new MockHttpExpectation(method, url, data, headers);
+ expectations.push(expectation);
+ return {
+ respond: function(status, data, headers) {
+ expectation.response = createResponse(status, data, headers);
+ }
+ };
+ };
+
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#expectGET
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new request expectation for GET requests. For more info see `expect()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {Object=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled. See #expect for more info.
+ */
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#expectHEAD
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new request expectation for HEAD requests. For more info see `expect()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {Object=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ */
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#expectDELETE
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new request expectation for DELETE requests. For more info see `expect()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {Object=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ */
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#expectPOST
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new request expectation for POST requests. For more info see `expect()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(string|RegExp|function(string)|Object)=} data HTTP request body or function that
+ * receives data string and returns true if the data is as expected, or Object if request body
+ * is in JSON format.
+ * @param {Object=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ */
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#expectPUT
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new request expectation for PUT requests. For more info see `expect()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(string|RegExp|function(string)|Object)=} data HTTP request body or function that
+ * receives data string and returns true if the data is as expected, or Object if request body
+ * is in JSON format.
+ * @param {Object=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ */
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#expectPATCH
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new request expectation for PATCH requests. For more info see `expect()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(string|RegExp|function(string)|Object)=} data HTTP request body or function that
+ * receives data string and returns true if the data is as expected, or Object if request body
+ * is in JSON format.
+ * @param {Object=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ */
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#expectJSONP
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Creates a new request expectation for JSONP requests. For more info see `expect()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @returns {requestHandler} Returns an object with `respond` method that control how a matched
+ * request is handled.
+ */
+ createShortMethods('expect');
+
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#flush
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Flushes all pending requests using the trained responses.
+ *
+ * @param {number=} count Number of responses to flush (in the order they arrived). If undefined,
+ * all pending requests will be flushed. If there are no pending requests when the flush method
+ * is called an exception is thrown (as this typically a sign of programming error).
+ */
+ $httpBackend.flush = function(count) {
+ $rootScope.$digest();
+ if (!responses.length) throw new Error('No pending request to flush !');
+
+ if (angular.isDefined(count)) {
+ while (count--) {
+ if (!responses.length) throw new Error('No more pending request to flush !');
+ responses.shift()();
+ }
+ } else {
+ while (responses.length) {
+ responses.shift()();
+ }
+ }
+ $httpBackend.verifyNoOutstandingExpectation();
+ };
+
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#verifyNoOutstandingExpectation
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Verifies that all of the requests defined via the `expect` api were made. If any of the
+ * requests were not made, verifyNoOutstandingExpectation throws an exception.
+ *
+ * Typically, you would call this method following each test case that asserts requests using an
+ * "afterEach" clause.
+ *
+ *
+ */
+ $httpBackend.verifyNoOutstandingExpectation = function() {
+ $rootScope.$digest();
+ if (expectations.length) {
+ throw new Error('Unsatisfied requests: ' + expectations.join(', '));
+ }
+ };
+
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#verifyNoOutstandingRequest
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Verifies that there are no outstanding requests that need to be flushed.
+ *
+ * Typically, you would call this method following each test case that asserts requests using an
+ * "afterEach" clause.
+ *
+ *
+ */
+ $httpBackend.verifyNoOutstandingRequest = function() {
+ if (responses.length) {
+ throw new Error('Unflushed requests: ' + responses.length);
+ }
+ };
+
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$httpBackend#resetExpectations
+ * @methodOf ngMock.$httpBackend
+ * @description
+ * Resets all request expectations, but preserves all backend definitions. Typically, you would
+ * call resetExpectations during a multiple-phase test when you want to reuse the same instance of
+ * $httpBackend mock.
+ */
+ $httpBackend.resetExpectations = function() {
+ expectations.length = 0;
+ responses.length = 0;
+ };
+
+ return $httpBackend;
+
+
+ function createShortMethods(prefix) {
+ angular.forEach(['GET', 'DELETE', 'JSONP'], function(method) {
+ $httpBackend[prefix + method] = function(url, headers) {
+ return $httpBackend[prefix](method, url, undefined, headers);
+ };
+ });
+
+ angular.forEach(['PUT', 'POST', 'PATCH'], function(method) {
+ $httpBackend[prefix + method] = function(url, data, headers) {
+ return $httpBackend[prefix](method, url, data, headers);
+ };
+ });
+ }
+}
+
+function MockHttpExpectation(method, url, data, headers) {
+
+ this.data = data;
+ this.headers = headers;
+
+ this.match = function(m, u, d, h) {
+ if (method != m) return false;
+ if (!this.matchUrl(u)) return false;
+ if (angular.isDefined(d) && !this.matchData(d)) return false;
+ if (angular.isDefined(h) && !this.matchHeaders(h)) return false;
+ return true;
+ };
+
+ this.matchUrl = function(u) {
+ if (!url) return true;
+ if (angular.isFunction(url.test)) return url.test(u);
+ return url == u;
+ };
+
+ this.matchHeaders = function(h) {
+ if (angular.isUndefined(headers)) return true;
+ if (angular.isFunction(headers)) return headers(h);
+ return angular.equals(headers, h);
+ };
+
+ this.matchData = function(d) {
+ if (angular.isUndefined(data)) return true;
+ if (data && angular.isFunction(data.test)) return data.test(d);
+ if (data && angular.isFunction(data)) return data(d);
+ if (data && !angular.isString(data)) return angular.equals(data, angular.fromJson(d));
+ return data == d;
+ };
+
+ this.toString = function() {
+ return method + ' ' + url;
+ };
+}
+
+function MockXhr() {
+
+ // hack for testing $http, $httpBackend
+ MockXhr.$$lastInstance = this;
+
+ this.open = function(method, url, async) {
+ this.$$method = method;
+ this.$$url = url;
+ this.$$async = async;
+ this.$$reqHeaders = {};
+ this.$$respHeaders = {};
+ };
+
+ this.send = function(data) {
+ this.$$data = data;
+ };
+
+ this.setRequestHeader = function(key, value) {
+ this.$$reqHeaders[key] = value;
+ };
+
+ this.getResponseHeader = function(name) {
+ // the lookup must be case insensitive,
+ // that's why we try two quick lookups first and full scan last
+ var header = this.$$respHeaders[name];
+ if (header) return header;
+
+ name = angular.lowercase(name);
+ header = this.$$respHeaders[name];
+ if (header) return header;
+
+ header = undefined;
+ angular.forEach(this.$$respHeaders, function(headerVal, headerName) {
+ if (!header && angular.lowercase(headerName) == name) header = headerVal;
+ });
+ return header;
+ };
+
+ this.getAllResponseHeaders = function() {
+ var lines = [];
+
+ angular.forEach(this.$$respHeaders, function(value, key) {
+ lines.push(key + ': ' + value);
+ });
+ return lines.join('\n');
+ };
+
+ this.abort = angular.noop;
+}
+
+
+/**
+ * @ngdoc function
+ * @name ngMock.$timeout
+ * @description
+ *
+ * This service is just a simple decorator for {@link ng.$timeout $timeout} service
+ * that adds a "flush" and "verifyNoPendingTasks" methods.
+ */
+
+angular.mock.$TimeoutDecorator = function($delegate, $browser) {
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$timeout#flush
+ * @methodOf ngMock.$timeout
+ * @description
+ *
+ * Flushes the queue of pending tasks.
+ *
+ * @param {number=} delay maximum timeout amount to flush up until
+ */
+ $delegate.flush = function(delay) {
+ $browser.defer.flush(delay);
+ };
+
+ /**
+ * @ngdoc method
+ * @name ngMock.$timeout#verifyNoPendingTasks
+ * @methodOf ngMock.$timeout
+ * @description
+ *
+ * Verifies that there are no pending tasks that need to be flushed.
+ */
+ $delegate.verifyNoPendingTasks = function() {
+ if ($browser.deferredFns.length) {
+ throw new Error('Deferred tasks to flush (' + $browser.deferredFns.length + '): ' +
+ formatPendingTasksAsString($browser.deferredFns));
+ }
+ };
+
+ function formatPendingTasksAsString(tasks) {
+ var result = [];
+ angular.forEach(tasks, function(task) {
+ result.push('{id: ' + task.id + ', ' + 'time: ' + task.time + '}');
+ });
+
+ return result.join(', ');
+ }
+
+ return $delegate;
+};
+
+/**
+ *
+ */
+angular.mock.$RootElementProvider = function() {
+ this.$get = function() {
+ return angular.element('');
+ };
+};
+
+/**
+ * @ngdoc overview
+ * @name ngMock
+ * @description
+ *
+ * # ngMock
+ *
+ * The `ngMock` module providers support to inject and mock Angular services into unit tests.
+ * In addition, ngMock also extends various core ng services such that they can be
+ * inspected and controlled in a synchronous manner within test code.
+ *
+ * {@installModule mocks}
+ *
+ *
+ *
+ */
+angular.module('ngMock', ['ng']).provider({
+ $browser: angular.mock.$BrowserProvider,
+ $exceptionHandler: angular.mock.$ExceptionHandlerProvider,
+ $log: angular.mock.$LogProvider,
+ $interval: angular.mock.$IntervalProvider,
+ $httpBackend: angular.mock.$HttpBackendProvider,
+ $rootElement: angular.mock.$RootElementProvider
+}).config(['$provide', function($provide) {
+ $provide.decorator('$timeout', angular.mock.$TimeoutDecorator);
+}]);
+
+/**
+ * @ngdoc overview
+ * @name ngMockE2E
+ * @description
+ *
+ * The `ngMockE2E` is an angular module which contains mocks suitable for end-to-end testing.
+ * Currently there is only one mock present in this module -
+ * the {@link ngMockE2E.$httpBackend e2e $httpBackend} mock.
+ */
+angular.module('ngMockE2E', ['ng']).config(['$provide', function($provide) {
+ $provide.decorator('$httpBackend', angular.mock.e2e.$httpBackendDecorator);
+}]);
+
+/**
+ * @ngdoc object
+ * @name ngMockE2E.$httpBackend
+ * @description
+ * Fake HTTP backend implementation suitable for end-to-end testing or backend-less development of
+ * applications that use the {@link ng.$http $http service}.
+ *
+ * *Note*: For fake http backend implementation suitable for unit testing please see
+ * {@link ngMock.$httpBackend unit-testing $httpBackend mock}.
+ *
+ * This implementation can be used to respond with static or dynamic responses via the `when` api
+ * and its shortcuts (`whenGET`, `whenPOST`, etc) and optionally pass through requests to the
+ * real $httpBackend for specific requests (e.g. to interact with certain remote apis or to fetch
+ * templates from a webserver).
+ *
+ * As opposed to unit-testing, in an end-to-end testing scenario or in scenario when an application
+ * is being developed with the real backend api replaced with a mock, it is often desirable for
+ * certain category of requests to bypass the mock and issue a real http request (e.g. to fetch
+ * templates or static files from the webserver). To configure the backend with this behavior
+ * use the `passThrough` request handler of `when` instead of `respond`.
+ *
+ * Additionally, we don't want to manually have to flush mocked out requests like we do during unit
+ * testing. For this reason the e2e $httpBackend automatically flushes mocked out requests
+ * automatically, closely simulating the behavior of the XMLHttpRequest object.
+ *
+ * To setup the application to run with this http backend, you have to create a module that depends
+ * on the `ngMockE2E` and your application modules and defines the fake backend:
+ *
+ *
+ * myAppDev = angular.module('myAppDev', ['myApp', 'ngMockE2E']);
+ * myAppDev.run(function($httpBackend) {
+ * phones = [{name: 'phone1'}, {name: 'phone2'}];
+ *
+ * // returns the current list of phones
+ * $httpBackend.whenGET('/phones').respond(phones);
+ *
+ * // adds a new phone to the phones array
+ * $httpBackend.whenPOST('/phones').respond(function(method, url, data) {
+ * phones.push(angular.fromJson(data));
+ * });
+ * $httpBackend.whenGET(/^\/templates\//).passThrough();
+ * //...
+ * });
+ *
+ *
+ * Afterwards, bootstrap your app with this new module.
+ */
+
+/**
+ * @ngdoc method
+ * @name ngMockE2E.$httpBackend#when
+ * @methodOf ngMockE2E.$httpBackend
+ * @description
+ * Creates a new backend definition.
+ *
+ * @param {string} method HTTP method.
+ * @param {string|RegExp} url HTTP url.
+ * @param {(string|RegExp)=} data HTTP request body.
+ * @param {(Object|function(Object))=} headers HTTP headers or function that receives http header
+ * object and returns true if the headers match the current definition.
+ * @returns {requestHandler} Returns an object with `respond` and `passThrough` methods that
+ * control how a matched request is handled.
+ *
+ * - respond –
+ * `{function([status,] data[, headers])|function(function(method, url, data, headers)}`
+ * – The respond method takes a set of static data to be returned or a function that can return
+ * an array containing response status (number), response data (string) and response headers
+ * (Object).
+ * - passThrough – `{function()}` – Any request matching a backend definition with `passThrough`
+ * handler, will be pass through to the real backend (an XHR request will be made to the
+ * server.
+ */
+
+/**
+ * @ngdoc method
+ * @name ngMockE2E.$httpBackend#whenGET
+ * @methodOf ngMockE2E.$httpBackend
+ * @description
+ * Creates a new backend definition for GET requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(Object|function(Object))=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` and `passThrough` methods that
+ * control how a matched request is handled.
+ */
+
+/**
+ * @ngdoc method
+ * @name ngMockE2E.$httpBackend#whenHEAD
+ * @methodOf ngMockE2E.$httpBackend
+ * @description
+ * Creates a new backend definition for HEAD requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(Object|function(Object))=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` and `passThrough` methods that
+ * control how a matched request is handled.
+ */
+
+/**
+ * @ngdoc method
+ * @name ngMockE2E.$httpBackend#whenDELETE
+ * @methodOf ngMockE2E.$httpBackend
+ * @description
+ * Creates a new backend definition for DELETE requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(Object|function(Object))=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` and `passThrough` methods that
+ * control how a matched request is handled.
+ */
+
+/**
+ * @ngdoc method
+ * @name ngMockE2E.$httpBackend#whenPOST
+ * @methodOf ngMockE2E.$httpBackend
+ * @description
+ * Creates a new backend definition for POST requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(string|RegExp)=} data HTTP request body.
+ * @param {(Object|function(Object))=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` and `passThrough` methods that
+ * control how a matched request is handled.
+ */
+
+/**
+ * @ngdoc method
+ * @name ngMockE2E.$httpBackend#whenPUT
+ * @methodOf ngMockE2E.$httpBackend
+ * @description
+ * Creates a new backend definition for PUT requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(string|RegExp)=} data HTTP request body.
+ * @param {(Object|function(Object))=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` and `passThrough` methods that
+ * control how a matched request is handled.
+ */
+
+/**
+ * @ngdoc method
+ * @name ngMockE2E.$httpBackend#whenPATCH
+ * @methodOf ngMockE2E.$httpBackend
+ * @description
+ * Creates a new backend definition for PATCH requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @param {(string|RegExp)=} data HTTP request body.
+ * @param {(Object|function(Object))=} headers HTTP headers.
+ * @returns {requestHandler} Returns an object with `respond` and `passThrough` methods that
+ * control how a matched request is handled.
+ */
+
+/**
+ * @ngdoc method
+ * @name ngMockE2E.$httpBackend#whenJSONP
+ * @methodOf ngMockE2E.$httpBackend
+ * @description
+ * Creates a new backend definition for JSONP requests. For more info see `when()`.
+ *
+ * @param {string|RegExp} url HTTP url.
+ * @returns {requestHandler} Returns an object with `respond` and `passThrough` methods that
+ * control how a matched request is handled.
+ */
+angular.mock.e2e = {};
+angular.mock.e2e.$httpBackendDecorator =
+ ['$rootScope', '$delegate', '$browser', createHttpBackendMock];
+
+
+angular.mock.clearDataCache = function() {
+ var key,
+ cache = angular.element.cache;
+
+ for(key in cache) {
+ if (Object.prototype.hasOwnProperty.call(cache,key)) {
+ var handle = cache[key].handle;
+
+ handle && angular.element(handle.elem).off();
+ delete cache[key];
+ }
+ }
+};
+
+
+
+(window.jasmine || window.mocha) && (function(window) {
+
+ var currentSpec = null;
+
+ beforeEach(function() {
+ currentSpec = this;
+ });
+
+ afterEach(function() {
+ var injector = currentSpec.$injector;
+
+ currentSpec.$injector = null;
+ currentSpec.$modules = null;
+ currentSpec = null;
+
+ if (injector) {
+ injector.get('$rootElement').off();
+ injector.get('$browser').pollFns.length = 0;
+ }
+
+ angular.mock.clearDataCache();
+
+ // clean up jquery's fragment cache
+ angular.forEach(angular.element.fragments, function(val, key) {
+ delete angular.element.fragments[key];
+ });
+
+ MockXhr.$$lastInstance = null;
+
+ angular.forEach(angular.callbacks, function(val, key) {
+ delete angular.callbacks[key];
+ });
+ angular.callbacks.counter = 0;
+ });
+
+ function isSpecRunning() {
+ return currentSpec && (window.mocha || currentSpec.queue.running);
+ }
+
+ /**
+ * @ngdoc function
+ * @name angular.mock.module
+ * @description
+ *
+ * *NOTE*: This function is also published on window for easy access.
+ *
+ * This function registers a module configuration code. It collects the configuration information
+ * which will be used when the injector is created by {@link angular.mock.inject inject}.
+ *
+ * See {@link angular.mock.inject inject} for usage example
+ *
+ * @param {...(string|Function|Object)} fns any number of modules which are represented as string
+ * aliases or as anonymous module initialization functions. The modules are used to
+ * configure the injector. The 'ng' and 'ngMock' modules are automatically loaded. If an
+ * object literal is passed they will be register as values in the module, the key being
+ * the module name and the value being what is returned.
+ */
+ window.module = angular.mock.module = function() {
+ var moduleFns = Array.prototype.slice.call(arguments, 0);
+ return isSpecRunning() ? workFn() : workFn;
+ /////////////////////
+ function workFn() {
+ if (currentSpec.$injector) {
+ throw new Error('Injector already created, can not register a module!');
+ } else {
+ var modules = currentSpec.$modules || (currentSpec.$modules = []);
+ angular.forEach(moduleFns, function(module) {
+ if (angular.isObject(module) && !angular.isArray(module)) {
+ modules.push(function($provide) {
+ angular.forEach(module, function(value, key) {
+ $provide.value(key, value);
+ });
+ });
+ } else {
+ modules.push(module);
+ }
+ });
+ }
+ }
+ };
+
+ /**
+ * @ngdoc function
+ * @name angular.mock.inject
+ * @description
+ *
+ * *NOTE*: This function is also published on window for easy access.
+ *
+ * The inject function wraps a function into an injectable function. The inject() creates new
+ * instance of {@link AUTO.$injector $injector} per test, which is then used for
+ * resolving references.
+ *
+ *
+ * ## Resolving References (Underscore Wrapping)
+ * Often, we would like to inject a reference once, in a `beforeEach()` block and reuse this
+ * in multiple `it()` clauses. To be able to do this we must assign the reference to a variable
+ * that is declared in the scope of the `describe()` block. Since we would, most likely, want
+ * the variable to have the same name of the reference we have a problem, since the parameter
+ * to the `inject()` function would hide the outer variable.
+ *
+ * To help with this, the injected parameters can, optionally, be enclosed with underscores.
+ * These are ignored by the injector when the reference name is resolved.
+ *
+ * For example, the parameter `_myService_` would be resolved as the reference `myService`.
+ * Since it is available in the function body as _myService_, we can then assign it to a variable
+ * defined in an outer scope.
+ *
+ * ```
+ * // Defined out reference variable outside
+ * var myService;
+ *
+ * // Wrap the parameter in underscores
+ * beforeEach( inject( function(_myService_){
+ * myService = _myService_;
+ * }));
+ *
+ * // Use myService in a series of tests.
+ * it('makes use of myService', function() {
+ * myService.doStuff();
+ * });
+ *
+ * ```
+ *
+ * See also {@link angular.mock.module angular.mock.module}
+ *
+ * ## Example
+ * Example of what a typical jasmine tests looks like with the inject method.
+ *
+ *
+ * angular.module('myApplicationModule', [])
+ * .value('mode', 'app')
+ * .value('version', 'v1.0.1');
+ *
+ *
+ * describe('MyApp', function() {
+ *
+ * // You need to load modules that you want to test,
+ * // it loads only the "ng" module by default.
+ * beforeEach(module('myApplicationModule'));
+ *
+ *
+ * // inject() is used to inject arguments of all given functions
+ * it('should provide a version', inject(function(mode, version) {
+ * expect(version).toEqual('v1.0.1');
+ * expect(mode).toEqual('app');
+ * }));
+ *
+ *
+ * // The inject and module method can also be used inside of the it or beforeEach
+ * it('should override a version and test the new version is injected', function() {
+ * // module() takes functions or strings (module aliases)
+ * module(function($provide) {
+ * $provide.value('version', 'overridden'); // override version here
+ * });
+ *
+ * inject(function(version) {
+ * expect(version).toEqual('overridden');
+ * });
+ * });
+ * });
+ *
+ *
+ *
+ * @param {...Function} fns any number of functions which will be injected using the injector.
+ */
+ window.inject = angular.mock.inject = function() {
+ var blockFns = Array.prototype.slice.call(arguments, 0);
+ var errorForStack = new Error('Declaration Location');
+ return isSpecRunning() ? workFn() : workFn;
+ /////////////////////
+ function workFn() {
+ var modules = currentSpec.$modules || [];
+
+ modules.unshift('ngMock');
+ modules.unshift('ng');
+ var injector = currentSpec.$injector;
+ if (!injector) {
+ injector = currentSpec.$injector = angular.injector(modules);
+ }
+ for(var i = 0, ii = blockFns.length; i < ii; i++) {
+ try {
+ /* jshint -W040 *//* Jasmine explicitly provides a `this` object when calling functions */
+ injector.invoke(blockFns[i] || angular.noop, this);
+ /* jshint +W040 */
+ } catch (e) {
+ if(e.stack && errorForStack) e.stack += '\n' + errorForStack.stack;
+ throw e;
+ } finally {
+ errorForStack = null;
+ }
+ }
+ }
+ };
+})(window);
diff --git a/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-resource.js b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-resource.js
new file mode 100644
index 0000000..0a3a8f2
--- /dev/null
+++ b/2013.12.December/bauerdevsession.angularjs/BauerDevSession.AngularJS.Tests/Scripts/angular-resource.js
@@ -0,0 +1,546 @@
+/**
+ * @license AngularJS v1.2.2
+ * (c) 2010-2012 Google, Inc. http://angularjs.org
+ * License: MIT
+ */
+(function(window, angular, undefined) {'use strict';
+
+var $resourceMinErr = angular.$$minErr('$resource');
+
+// Helper functions and regex to lookup a dotted path on an object
+// stopping at undefined/null. The path must be composed of ASCII
+// identifiers (just like $parse)
+var MEMBER_NAME_REGEX = /^(\.[a-zA-Z_$][0-9a-zA-Z_$]*)+$/;
+
+function isValidDottedPath(path) {
+ return (path != null && path !== '' && path !== 'hasOwnProperty' &&
+ MEMBER_NAME_REGEX.test('.' + path));
+}
+
+function lookupDottedPath(obj, path) {
+ if (!isValidDottedPath(path)) {
+ throw $resourceMinErr('badmember', 'Dotted member path "@{0}" is invalid.', path);
+ }
+ var keys = path.split('.');
+ for (var i = 0, ii = keys.length; i < ii && obj !== undefined; i++) {
+ var key = keys[i];
+ obj = (obj !== null) ? obj[key] : undefined;
+ }
+ return obj;
+}
+
+/**
+ * @ngdoc overview
+ * @name ngResource
+ * @description
+ *
+ * # ngResource
+ *
+ * The `ngResource` module provides interaction support with RESTful services
+ * via the $resource service.
+ *
+ * {@installModule resource}
+ *
+ *
+ *
+ * See {@link ngResource.$resource `$resource`} for usage.
+ */
+
+/**
+ * @ngdoc object
+ * @name ngResource.$resource
+ * @requires $http
+ *
+ * @description
+ * A factory which creates a resource object that lets you interact with
+ * [RESTful](http://en.wikipedia.org/wiki/Representational_State_Transfer) server-side data sources.
+ *
+ * The returned resource object has action methods which provide high-level behaviors without
+ * the need to interact with the low level {@link ng.$http $http} service.
+ *
+ * Requires the {@link ngResource `ngResource`} module to be installed.
+ *
+ * @param {string} url A parametrized URL template with parameters prefixed by `:` as in
+ * `/user/:username`. If you are using a URL with a port number (e.g.
+ * `http://example.com:8080/api`), it will be respected.
+ *
+ * If you are using a url with a suffix, just add the suffix, like this:
+ * `$resource('http://example.com/resource.json')` or `$resource('http://example.com/:id.json')`
+ * or even `$resource('http://example.com/resource/:resource_id.:format')`
+ * If the parameter before the suffix is empty, :resource_id in this case, then the `/.` will be
+ * collapsed down to a single `.`. If you need this sequence to appear and not collapse then you
+ * can escape it with `/\.`.
+ *
+ * @param {Object=} paramDefaults Default values for `url` parameters. These can be overridden in
+ * `actions` methods. If any of the parameter value is a function, it will be executed every time
+ * when a param value needs to be obtained for a request (unless the param was overridden).
+ *
+ * Each key value in the parameter object is first bound to url template if present and then any
+ * excess keys are appended to the url search query after the `?`.
+ *
+ * Given a template `/path/:verb` and parameter `{verb:'greet', salutation:'Hello'}` results in
+ * URL `/path/greet?salutation=Hello`.
+ *
+ * If the parameter value is prefixed with `@` then the value of that parameter is extracted from
+ * the data object (useful for non-GET operations).
+ *
+ * @param {Object.