Thanks for this!
trying to use this example, I'm getting disconnects.
serial output dump:
$ make monitor
MONITOR
--- idf_monitor on COM9 115200 ---
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:5684
load:0x40078000,len:0
load:0x40078000,len:13804
entry 0x40079030
I (67) boot: Detected ESP32
I (31) boot: ESP-IDF v3.0-rc1-dirty 2nd stage bootloader
I (31) boot: compile time 15:12:37
I (31) boot: Enabling RNG early entropy source...
I (36) boot: SPI Speed : 40MHz
I (40) boot: SPI Mode : DIO
I (44) boot: SPI Flash Size : 4MB
I (48) boot: Partition Table:
I (52) boot: ## Label Usage Type ST Offset Length
I (59) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (67) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (74) boot: 2 factory factory app 00 00 00010000 00100000
I (82) boot: End of partition table
I (86) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x0d4e0 ( 54496) map
I (114) esp_image: segment 1: paddr=0x0001d508 vaddr=0x3ffb0000 size=0x02b08 ( 11016) load
I (118) esp_image: segment 2: paddr=0x00020018 vaddr=0x400d0018 size=0x56738 (354104) map
0x400d0018: _stext at ??:?
I (243) esp_image: segment 3: paddr=0x00076758 vaddr=0x3ffb2b08 size=0x00004 ( 4) load
I (244) esp_image: segment 4: paddr=0x00076764 vaddr=0x40080000 size=0x00400 ( 1024) load
0x40080000: _iram_start at D:/Esp32/Esp-IDF/components/freertos/xtensa_vectors.S:1685
I (251) esp_image: segment 5: paddr=0x00076b6c vaddr=0x40080400 size=0x0f968 ( 63848) load
I (285) esp_image: segment 6: paddr=0x000864dc vaddr=0x400c0000 size=0x00000 ( 0) load
I (295) boot: Loaded app from partition at offset 0x10000
I (295) boot: Disabling RNG early entropy source...
I (297) cpu_start: Pro cpu up.
I (301) cpu_start: Starting app cpu, entry point is 0x40080d70
0x40080d70: call_start_cpu1 at D:/Esp32/Esp-IDF/components/esp32/cpu_start.c:222
I (0) cpu_start: App cpu up.
I (311) heap_init: Initializing. RAM available for dynamic allocation:
I (318) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (324) heap_init: At 3FFB8840 len 000277C0 (157 KiB): DRAM
I (330) heap_init: At 3FFE0440 len 00003BC0 (14 KiB): D/IRAM
I (337) heap_init: At 3FFE4350 len 0001BCBB0 (111 KiB): D/IRAM
I (343) heap_init: At 4008FD68 len 00010298 (64 KiB): IRAM
I (349) cpu_start: Pro cpu start user code
I (32) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (98) wifi: wifi firmware version: f204566
I (98) wifi: config NVS flash: enabled
I (98) wifi: config nano formating: disabled
I (98) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (108) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (138) wifi: Init dynamic tx buffer num: 32
I (138) wifi: Init data frame dynamic rx buffer num: 32
I (138) wifi: Init management frame dynamic rx buffer num: 32
I (138) wifi: wifi driver task: 3ffc0178, prio:23, stack:44096
I (148) wifi: Init static rx buffer num: 10
I (148) wifi: Init dynamic rx buffer num: 32
I (158) wifi: wifi power manager task: 0x3ffc4db8 prio: 21 stack: 2560
I (188) phy: phy_version: 366.0, ba9923d, Oct 31 2017, 18:06:17, 0, 0
I (188) wifi: mode : sta (30:ae:a4:42:2f:fc)
I (188) blynk-example: WiFi started
I (198) blynk-example: state: 1
W (198) blynk: disconnected, reason: 8, code: 202
I (198) blynk-example: state: 1
I (318) wifi: n:2 0, o:1 0, ap:255 255, sta:2 0, prof:1
I (1298) wifi: state: init -> auth (b0)
I (1298) wifi: state: auth -> assoc (0)
I (1308) wifi: state: assoc -> run (10)
I (1318) wifi: connected with NAFTALY, channel 2
I (2488) event: sta ip: 10.0.0.166, mask: 255.255.255.0, gw: 10.0.0.1
I (4308) wifi: pm start, type:0
I (6058) blynk-example: state: 2
I (11058) blynk: auth: 65535
W (11058) blynk: disconnected, reason: 6, code: 0
I (11058) blynk-example: state: 1
I (16278) blynk-example: state: 2
I (21288) blynk: auth: 65535
W (21288) blynk: disconnected, reason: 6, code: 0
I (21288) blynk-example: state: 1
I (26518) blynk-example: state: 2
I (31518) blynk: auth: 65535
W (31518) blynk: disconnected, reason: 6, code: 0
I (31518) blynk-example: state: 1
I (36738) blynk-example: state: 2
I (41738) blynk: auth: 65535
W (41738) blynk: disconnected, reason: 6, code: 0
I (41738) blynk-example: state: 1
I (46958) blynk-example: state: 2
I (51958) blynk: auth: 65535
W (51958) blynk: disconnected, reeason: 6, code: 0
I (51958) blynk-example: state: 1
I (57178) blynk-example: state: 2
I (62188) blynk: auth: 65535
W (62188) blynk: disconnected, reason: 6, code: 0
I (62188) blynk-example: state: 1
Thanks for this!
trying to use this example, I'm getting disconnects.
serial output dump:
$ make monitor
MONITOR
--- idf_monitor on COM9 115200 ---
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:5684
load:0x40078000,len:0
load:0x40078000,len:13804
entry 0x40079030
I (67) boot: Detected ESP32
I (31) boot: ESP-IDF v3.0-rc1-dirty 2nd stage bootloader
I (31) boot: compile time 15:12:37
I (31) boot: Enabling RNG early entropy source...
I (36) boot: SPI Speed : 40MHz
I (40) boot: SPI Mode : DIO
I (44) boot: SPI Flash Size : 4MB
I (48) boot: Partition Table:
I (52) boot: ## Label Usage Type ST Offset Length
I (59) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (67) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (74) boot: 2 factory factory app 00 00 00010000 00100000
I (82) boot: End of partition table
I (86) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x0d4e0 ( 54496) map
I (114) esp_image: segment 1: paddr=0x0001d508 vaddr=0x3ffb0000 size=0x02b08 ( 11016) load
I (118) esp_image: segment 2: paddr=0x00020018 vaddr=0x400d0018 size=0x56738 (354104) map
0x400d0018: _stext at ??:?
I (243) esp_image: segment 3: paddr=0x00076758 vaddr=0x3ffb2b08 size=0x00004 ( 4) load
I (244) esp_image: segment 4: paddr=0x00076764 vaddr=0x40080000 size=0x00400 ( 1024) load
0x40080000: _iram_start at D:/Esp32/Esp-IDF/components/freertos/xtensa_vectors.S:1685
I (251) esp_image: segment 5: paddr=0x00076b6c vaddr=0x40080400 size=0x0f968 ( 63848) load
I (285) esp_image: segment 6: paddr=0x000864dc vaddr=0x400c0000 size=0x00000 ( 0) load
I (295) boot: Loaded app from partition at offset 0x10000
I (295) boot: Disabling RNG early entropy source...
I (297) cpu_start: Pro cpu up.
I (301) cpu_start: Starting app cpu, entry point is 0x40080d70
0x40080d70: call_start_cpu1 at D:/Esp32/Esp-IDF/components/esp32/cpu_start.c:222
I (0) cpu_start: App cpu up.
I (311) heap_init: Initializing. RAM available for dynamic allocation:
I (318) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (324) heap_init: At 3FFB8840 len 000277C0 (157 KiB): DRAM
I (330) heap_init: At 3FFE0440 len 00003BC0 (14 KiB): D/IRAM
I (337) heap_init: At 3FFE4350 len 0001BCBB0 (111 KiB): D/IRAM
I (343) heap_init: At 4008FD68 len 00010298 (64 KiB): IRAM
I (349) cpu_start: Pro cpu start user code
I (32) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (98) wifi: wifi firmware version: f204566
I (98) wifi: config NVS flash: enabled
I (98) wifi: config nano formating: disabled
I (98) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (108) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (138) wifi: Init dynamic tx buffer num: 32
I (138) wifi: Init data frame dynamic rx buffer num: 32
I (138) wifi: Init management frame dynamic rx buffer num: 32
I (138) wifi: wifi driver task: 3ffc0178, prio:23, stack:44096
I (148) wifi: Init static rx buffer num: 10
I (148) wifi: Init dynamic rx buffer num: 32
I (158) wifi: wifi power manager task: 0x3ffc4db8 prio: 21 stack: 2560
I (188) phy: phy_version: 366.0, ba9923d, Oct 31 2017, 18:06:17, 0, 0
I (188) wifi: mode : sta (30:ae:a4:42:2f:fc)
I (188) blynk-example: WiFi started
I (198) blynk-example: state: 1
W (198) blynk: disconnected, reason: 8, code: 202
I (198) blynk-example: state: 1
I (318) wifi: n:2 0, o:1 0, ap:255 255, sta:2 0, prof:1
I (1298) wifi: state: init -> auth (b0)
I (1298) wifi: state: auth -> assoc (0)
I (1308) wifi: state: assoc -> run (10)
I (1318) wifi: connected with NAFTALY, channel 2
I (2488) event: sta ip: 10.0.0.166, mask: 255.255.255.0, gw: 10.0.0.1
I (4308) wifi: pm start, type:0
I (6058) blynk-example: state: 2
I (11058) blynk: auth: 65535
W (11058) blynk: disconnected, reason: 6, code: 0
I (11058) blynk-example: state: 1
I (16278) blynk-example: state: 2
I (21288) blynk: auth: 65535
W (21288) blynk: disconnected, reason: 6, code: 0
I (21288) blynk-example: state: 1
I (26518) blynk-example: state: 2
I (31518) blynk: auth: 65535
W (31518) blynk: disconnected, reason: 6, code: 0
I (31518) blynk-example: state: 1
I (36738) blynk-example: state: 2
I (41738) blynk: auth: 65535
W (41738) blynk: disconnected, reason: 6, code: 0
I (41738) blynk-example: state: 1
I (46958) blynk-example: state: 2
I (51958) blynk: auth: 65535
W (51958) blynk: disconnected, reeason: 6, code: 0
I (51958) blynk-example: state: 1
I (57178) blynk-example: state: 2
I (62188) blynk: auth: 65535
W (62188) blynk: disconnected, reason: 6, code: 0
I (62188) blynk-example: state: 1