MTS DTMS-705

[renat85]

Yaml in attach
test_hum_.zip

[eigger]

can you try like this?

uart:
  rx_pin: GPIO4
  tx_pin: GPIO5
  baud_rate: 9600
  data_bits: 8
  parity: NONE
  stop_bits: 1

#packages:
#  sensor1: !include test-hum-1.yaml
#  sensor2: !include test-hum-2.yaml

external_components:
  - source: github://eigger/espcomponents/@latest
    components: [ uartex ]
    refresh: always

uartex:
  rx_timeout: 20ms
  tx_delay: 20ms
  tx_timeout: 500ms
  tx_retry_cnt: 1
  #rx_length: 12

  rx_header: [0x55, 0xaa]
#  rx_footer: [0x0D, 0x0A]
  tx_header: [0x55, 0xaa]
#  tx_footer: [0x0D, 0x0A]

  rx_checksum: add
  tx_checksum: add

  version:
    disabled: False
  error:
    disabled: False
  log:
    disabled: False

switch:
  - platform: uartex
    name: "main_power"
    state:
      data: [0x03, 0x07, 0x00, 0x05, 0x01, 0x01, 0x00, 0x01]
#      mask: [0x12, 0x11]
    state_on:
      offset: 8
      data: [0x01]
    state_off:
      offset: 8
      data: [0x00]
    command_on:
      data: [0x00, 0x06, 0x00, 0x05, 0x01, 0x01, 0x00, 0x01, 0x01]
      ack: [0x03, 0x07, 0x00, 0x05, 0x01, 0x01, 0x00, 0x01, 0x01]
    command_off:
      data: [0x00, 0x06, 0x00, 0x05, 0x01, 0x01, 0x00, 0x01, 0x00]
      ack: [0x03, 0x07, 0x00, 0x05, 0x01, 0x01, 0x00, 0x01, 0x00]
    command_update: [0x00, 0x08, 0x00, 0x00]
  - platform: uartex
    name: "backlight"
    state:
      data: [0x03, 0x07, 0x00, 0x05, 0x10, 0x01, 0x00, 0x01]
#      mask: [0x12, 0x11]
    state_on:
      offset: 8
      data: [0x00]
    state_off:
      offset: 8
      data: [0x01]
    command_on:
      data: [0x00, 0x06, 0x00, 0x05, 0x10, 0x01, 0x00, 0x01, 0x00]
      ack: [0x03, 0x07, 0x00, 0x05, 0x10, 0x01, 0x00, 0x01, 0x00]
    command_off:
      data: [0x00, 0x06, 0x00, 0x05, 0x10, 0x01, 0x00, 0x01, 0x01]
      ack: [0x03, 0x07, 0x00, 0x05, 0x10, 0x01, 0x00, 0x01, 0x01]
  - platform: uartex
    name: "warm_steam"
    state:
      data: [0x03, 0x07, 0x00, 0x05, 0x1a, 0x01, 0x00, 0x01]
#      mask: [0x12, 0x11]
    state_on:
      offset: 8
      data: [0x01]
    state_off:
      offset: 8
      data: [0x00]
    command_on:
      data: [0x00, 0x06, 0x00, 0x05, 0x1a, 0x01, 0x00, 0x01, 0x01]
      ack: [0x03, 0x07, 0x00, 0x05, 0x1a, 0x01, 0x00, 0x01, 0x01]
    command_off:
      data: [0x00, 0x06, 0x00, 0x05, 0x1a, 0x01, 0x00, 0x01, 0x00]
      ack: [0x03, 0x07, 0x00, 0x05, 0x1a, 0x01, 0x00, 0x01, 0x00]

[renat85]

Work, not stable. And dont work parse status.

[eigger]

Could you try this? It might not work perfectly. I'll think about how to handle variable lengths.

uart:
  rx_pin: GPIO4
  tx_pin: GPIO5
  baud_rate: 9600
  data_bits: 8
  parity: NONE
  stop_bits: 1

#packages:
#  sensor1: !include test-hum-1.yaml
#  sensor2: !include test-hum-2.yaml

external_components:
  - source: github://eigger/espcomponents/@latest
    components: [ uartex ]
    refresh: always

uartex:
  - id: uartex_12
    rx_timeout: 20ms
    tx_delay: 20ms
    tx_timeout: 500ms
    tx_retry_cnt: 1
    rx_length: 12
  
    rx_header: [0x55, 0xaa]
    tx_header: [0x55, 0xaa]
  
    rx_checksum: add
    tx_checksum: add
  
    version:
      disabled: False
    error:
      disabled: False
    log:
      disabled: False
  - id: uartex_15
    rx_timeout: 20ms
    tx_delay: 20ms
    tx_timeout: 500ms
    tx_retry_cnt: 1
    rx_length: 15
  
    rx_header: [0x55, 0xaa]
    tx_header: [0x55, 0xaa]
  
    rx_checksum: add
    tx_checksum: add

switch:
  - platform: uartex
    name: "main_power"
    uartex_id: uartex_12
    state:
      data: [0x03, 0x07, 0x00, 0x05, 0x01, 0x01, 0x00, 0x01]
#      mask: [0x12, 0x11]
    state_on:
      offset: 8
      data: [0x01]
    state_off:
      offset: 8
      data: [0x00]
    command_on:
      data: [0x00, 0x06, 0x00, 0x05, 0x01, 0x01, 0x00, 0x01, 0x01]
      ack: [0x03, 0x07, 0x00, 0x05, 0x01, 0x01, 0x00, 0x01, 0x01]
    command_off:
      data: [0x00, 0x06, 0x00, 0x05, 0x01, 0x01, 0x00, 0x01, 0x00]
      ack: [0x03, 0x07, 0x00, 0x05, 0x01, 0x01, 0x00, 0x01, 0x00]
    command_update: [0x00, 0x08, 0x00, 0x00]
  - platform: uartex
    name: "backlight"
    uartex_id: uartex_12
    state:
      data: [0x03, 0x07, 0x00, 0x05, 0x10, 0x01, 0x00, 0x01]
#      mask: [0x12, 0x11]
    state_on:
      offset: 8
      data: [0x00]
    state_off:
      offset: 8
      data: [0x01]
    command_on:
      data: [0x00, 0x06, 0x00, 0x05, 0x10, 0x01, 0x00, 0x01, 0x00]
      ack: [0x03, 0x07, 0x00, 0x05, 0x10, 0x01, 0x00, 0x01, 0x00]
    command_off:
      data: [0x00, 0x06, 0x00, 0x05, 0x10, 0x01, 0x00, 0x01, 0x01]
      ack: [0x03, 0x07, 0x00, 0x05, 0x10, 0x01, 0x00, 0x01, 0x01]
  - platform: uartex
    name: "warm_steam"
    uartex_id: uartex_12
    state:
      data: [0x03, 0x07, 0x00, 0x05, 0x1a, 0x01, 0x00, 0x01]
#      mask: [0x12, 0x11]
    state_on:
      offset: 8
      data: [0x01]
    state_off:
      offset: 8
      data: [0x00]
    command_on:
      data: [0x00, 0x06, 0x00, 0x05, 0x1a, 0x01, 0x00, 0x01, 0x01]
      ack: [0x03, 0x07, 0x00, 0x05, 0x1a, 0x01, 0x00, 0x01, 0x01]
    command_off:
      data: [0x00, 0x06, 0x00, 0x05, 0x1a, 0x01, 0x00, 0x01, 0x00]
      ack: [0x03, 0x07, 0x00, 0x05, 0x1a, 0x01, 0x00, 0x01, 0x00]