[OP Stack Deployment] Receiving a "no beacon endpoint is configured" error when running op-node

[zaguezzar]

Did you check the documentation?

• Yes

Did you check for duplicate questions?

• Yes

Issue Description

I'm following this documentation to create an L2 rollup and I'm at the stage of starting op-node after successfully starting op-geth. I've tried looking for beacon flags on the command but they don't seem to exist on the latest version, and adding --l1.beacon didn't work. How can I solve it? Let me know if you need more information. Thank you. ❤️

Logs

~/optimism/op-node$ ./bin/op-node   --l2=http://localhost:8551/   --l2.jwt-secret=./jwt.txt   --sequencer.enabled   --sequencer.l1-confs=5   --verifier.l1-confs=4   --rollup.config=../../.deployer/rollup.json   --rpc.addr=0.0.0.0   --p2p.disable   --rpc.enable-admin   --p2p.sequencer.key=$GS_SEQUENCER_PRIVATE_KEY   --l1=$L1_RPC_URL   --l1.rpckind=$L1_RPC_KIND
INFO [03-20|10:39:40.190] Not opted in to ProtocolVersions signal loading, disabling ProtocolVersions contract now.
INFO [03-20|10:39:40.191] No persisted sequencer state loaded
CRIT [03-20|10:39:40.191] Application failed                       message="failed to setup: unable to create the rollup node config: ecotone upgrade scheduled but no beacon endpoint is configured"

Additional Information

Dependency versions:

Dependency	Minimum	Actual
git	2	2.34.1
go	1.21	1.21.6
node	20	20.18.3
pnpm	8	8.15.9
foundry	0.2.0	1.0.0
make	3	4.3
jq	1.6	1.6
direnv	2	2.25.2

op tag: ci-builder/v0.36.0-2-ga06cae81e
geth tag: v1.101503.2-rc.1
deployer tag: 0.3.0-rc.5

Feedback

No response

[imtipi]

--l1.beacon didn't work.

can you post the log here?i can't find your l1.beacon in current logs

[zaguezzar]

By downloading the v1.12.0 release? If so, I can't seem to find the /bin directory inside it. :/

[imtipi]

By downloading the v1.12.0 release? If so, I can't seem to find the /bin directory inside it. :/

have you built the package again?

[zaguezzar]

Scratch that, my initial attempt at rebuilding the package wasn't fruitful but I figured out the problem. The beacon error is gone since the flag is now available, I'll try to troubleshoot the new errors (failed to init L2: failed to get L2 chain ID: 401 Unauthorized: signature is invalid) and get back to you if I'm stuck. Thank you! ❤️

[imtipi]

Scratch that, my initial attempt at rebuilding the package wasn't fruitful but I figured out the problem. The beacon error is gone since the flag is now available, I'll try to troubleshoot the new errors (failed to init L2: failed to get L2 chain ID: 401 Unauthorized: signature is invalid) and get back to you if I'm stuck. Thank you! ❤️

401 Unauthorized: signature is invalid usually means your opgeth(--authrpc.jwtsecret) and opnode(--l2.jwt-secret) didn't use same jwt file

[javjerez]

Hi zaguezzar, I saw your comment where you mentioned resolving the beacon error, but I’m facing a similar issue and I’m stuck. I can’t seem to find the /bin directory inside the v1.12.0 release and I can’t complete the rebuild without it.

You mentioned figuring out the problem, but I wasn't able to find the details on how you solved it. Could you share what you did to get past this step?

Thanks in advance I really appreciate your help!

[imtipi]

Hi zaguezzar, I saw your comment where you mentioned resolving the beacon error, but I’m facing a similar issue and I’m stuck. I can’t seem to find the /bin directory inside the v1.12.0 release and I can’t complete the rebuild without it.

You mentioned figuring out the problem, but I wasn't able to find the details on how you solved it. Could you share what you did to get past this step?

Thanks in advance I really appreciate your help!

what component you try to build?op-node is fine for me

[javjerez]

op-node is actually the one I can't build. I downloaded 'op-node' at v1.12.0 and 'op-geth' at v1.101503.0 from the following link: https://docs.optimism.io/notices/pectra-changes

'op-geth' works correctly but 'op-node' doesn't generate any '/bin' directory after building, which is where I'm stuck

[imtipi]

op-node is actually the one I can't build. I downloaded 'op-node' at v1.12.0 and 'op-geth' at v1.101503.0 from the following link: https://docs.optimism.io/notices/pectra-changes

'op-geth' works correctly but 'op-node' doesn't generate any '/bin' directory after building, which is where I'm stuck

just op-node in op-node folder works for me

[opfocus]

We believe the original issue has been resolved, so I am closing this discussion.
After closing, we can still add comments, and you can ask to reopen the discussion if necessary.