Go-E Charger does not handle WLAN-AP properly

[tops4u]

I have a stable connection of the GO-E Charger to my WLAN Network since I have installed a Ubiquity AP just about 5-10 Meters away in the same room. However, Ubiquiti can see the Go-E AP being active from time to time (see image from the last 24h. But the Wallbox has been using the same AP for more than 4 Days now without interruption, so why does the internal AP come active?

Other WLAN Settings are also not taken into consideration:
I have fixed the Channel to 13 in the APP yet it broadcasts on Channel 11. I have set an AP Password, which it does not use (see Screenshot I just set it to "123456789" but it claims "Not Set". I have set it to be off when connected to the Cloud - which is most probably disregarded.

Since we already have some WLAN activity in the neighborhood, it would be very much desired to have as few AP as need active.

GO.E Charger HW Revision v4 / Firmware 59.4 / iOS App 4.7.6

Attachements: Ubiquiti Network Scanner / App Screenshot WLAN / Ongoing WLAN Session with the AP in the same Room

[CommanderRedYT]

You have turned off "Hotspot immer an", which means the hotspot will be active as long as there is no cloud connection. Probably the cloud connection just got stuck and so while reconnecting the hotspot was turned on automatically.

Turning off the hotspot completely would mean that you would need to factory reset the charger in case the cloud connection or the internet connection would fail, and because of that it is not possible to do it.