PS5 freezing / shutting down with Libhijacker enabled

[mmcgr97]

Does anyone know how to fix Libhijacker randomly freezing and shutting down my PS5 when launching / playing games?

I've tried jailbreaking my launch model PS5 on both 4.51 and 4.50 firmware with both idlesauce and zecoxao and etahen and with libhijacker enabled (config.ini set to Libhijacker_cheats=1") my PS5 regularly either freezes or shuts down when games are starting up or they've been open for a few minutes. Seems to happen on both games that can be FPS boosted with libhijacker and games that don't work with it.

Any solution would be greatly appreciated

[jackfavvv]

Don't enable cheats or the Libhijacker though etaHEN or by the config.ini from Itemzflow.

[mmcgr97]

Don't enable cheats or the Libhijacker though etaHEN or by the config.ini from Itemzflow.

So then how do I enable it?

[mmcgr97]

Don't enable cheats or the Libhijacker though etaHEN or by the config.ini from Itemzflow.

So then how am I supposed to enable 60fps patches?

[jackfavvv]

Don't enable cheats or the Libhijacker though etaHEN or by the config.ini from Itemzflow.

So then how am I supposed to enable 60fps patches?

There's an updated payload on Idlesauce's webhost. First pick k-stuff, then Libhijacker and it will automatically apply the patches when you launch the game.

In other words, don't even use etaHEN if you want to enable 60fps patches.

[mmcgr97]

Tried it and RDR2 is still crashing (although not as much) as with ETAhen

[jackfavvv]

Tried it and RDR2 is still crashing (although not as much) as with ETAhen

I'm currently playing Batman: Arkham Knight with just k-stuff and Libhijacker payload and everything runs fine. Have you tried other games, or is this only happening with RDR2?

[mmcgr97]

Tried it and RDR2 is still crashing (although not as much) as with ETAhen

I'm currently playing Batman: Arkham Knight with just k-stuff and Libhijacker payload and everything runs fine. Have you tried other games, or is this only happening with RDR2?

Just RDR2 seems to have the problem now, where as I couldn't play more than 5 minutes of Far Cry 3 or Slender Man with ETAHEN 1.8b. Still crashes with libhijacker and kstuff although far less often.

Do you know why ETAHEN is causing games to crash?

[mmcgr97]

Really annoying bug I've found with Kstuff + Libhijacker. Libhijacker randomly stops working after switching to a new game. Sometimes I can switch between several games before it stops working and other times it stops working after just 1 game. Button combinations (Square + Triangle, Square + Circle) stop working too.

Any idea why this is happening? Doesn't happen with ETAHEN.

[mmcgr97]

Tried Arkham Knight with Kstuff and Libhijacker and it freezes at the opening level. Even without libhijacker and the game running in 30fps it freezes. PS5 doesn't turn off though

[jackfavvv]

Do you know why ETAHEN is causing games to crash?

Yeah, but it's hard to explain. In short though it has come conflicting issues with the Debug. Which was why before, if you mess with the values in the config.ini from Itemzflow, your system will crash the next time you click on etaHEN and it does it debug.

Tried Arkham Knight with Kstuff and Libhijacker and it freezes at the opening level. Even without libhijacker and the game running in 30fps it freezes. PS5 doesn't turn off though

Are you talking about after the diner scene where Batman makes his appearance on top of that skyscraper?
Yeah, I had the exact same issue at that exact spot. It pretty much means you have a bad dump of the game or update. Here, try the one I'm using, CUSA00133 (v1.15) by FantasmaXDS. It'll works flawlessly at 60fps. Make sure you get both the game and update.

[mmcgr97]

That's the one I used and it still froze. I'll download it again just to make sure

Some of the lit up signs were also flickering during that upwards panning shot where Batman first appears, which doesn't happen on my retail PS5.

Very weird.

[mmcgr97]

Do you know if ETAHEN 1.8b is using the latest version of libhijacker?

[jackfavvv]

That's the one I used and it still froze. I'll download it again just to make sure

Some of the lit up signs were also flickering during that upwards panning shot where Batman first appears, which doesn't happen on my retail PS5.

Very weird.

That is weird, because I've even tested that exact spot five time in a row when Batman showed up and it no longer froze. There were some light flickering, though.

Anyways, I recommend you trying again. With just k-stuff + Libhijacker. Don't use the feature from Itemzflow, because that will freeze your PS5 for sure.
Also, don't use the button combo for fliprate, just launch the game normally and the patch will auto apply.

Do you know if ETAHEN 1.8b is using the latest version of libhijacker?

Nope, that you'll have to ask LightningMods.

[mmcgr97]

Kstuff + Libhijacker is what I tried it with. I even tried it with only kstuff at 30fps and it still crashed

[jackfavvv]

Kstuff + Libhijacker is what I tried it with. I even tried it with only kstuff at 30fps and it still crashed

That means that you tried the game at neutral, and it still crashed. Which means that you have a bad, corrupted copy.
Anyways, I've tested it 6 times in a row now and it works just fine(check video).
https://youtu.be/PMbdT72bKDc