Exception running on NodeMCU #3
Description
Hi
I would like to use CopyThreads but get the following exception (continuously) when running on NodeMCU (12-E) 8266 (flashed for Arduino IDE c++). I used your blink example verbatim.
Thanks
Daniel
14:22:40.230 -> LED1 HIGH67
14:22:40.247 ->
14:22:43.397 -> --------------- CUT HERE FOR EXCEPTION DECODER ---------------
14:22:43.431 ->
14:22:43.431 -> Soft WDT reset
14:22:43.442 ->
14:22:43.442 -> >>>stack>>>
14:22:43.446 ->
14:22:43.446 -> ctx: cont
14:22:43.453 -> sp: 3ffffdd0 end: 3fffffc0 offset: 01a0
14:22:43.473 -> 3fffff70: 00000000 feefeffe 40201298 40201280
14:22:43.492 -> 3fffff80: 3fffdad0 00000000 3ffee4d8 40201126
14:22:43.515 -> 3fffff90: 3ffee588 00000000 3ffee574 4020144e
14:22:43.540 -> 3fffffa0: feefeffe feefeffe feefeffe 40201cf4
14:22:43.564 -> 3fffffb0: feefeffe feefeffe 3ffe85d8 40100bc9
14:22:43.592 -> <<<stack<<<
14:22:43.596 ->
14:22:43.596 -> --------------- CUT HERE FOR EXCEPTION DECODER ---------------
14:22:43.635 ->
14:22:43.640 -> ets Jan 8 2013,rst cause:2, boot mode:(3,6)
14:22:43.664 ->
14:22:43.664 -> load 0x4010f000, len 3460, room 16
14:22:43.681 -> tail 4
14:22:43.697 -> chksum 0xcc
14:22:43.705 -> load 0x3fff20b8, len 40, room 4
14:22:43.807 -> tail 4
14:22:43.807 -> chksum 0xc9
14:22:43.814 -> csum 0xc9
14:22:43.820 -> v00042290
14:22:43.825 -> ~ld
14:22:43.830 -> LED1 HIGH67
14:22:43.846 ->
14:22:46.725 -> --------------- CUT HERE FOR EXCEPTION DECODER ---------------