How to start the Printer?

[wyemhu12]

Hi, How to start the Printer after I've loaded the Schematic? What are hot keys and how to open settings?

[jensvh]

Hey, the shortcut for opening the config menu is m + c or , + c depending on your keyboard. Here you can find both the litematica settings and the printer settings. All printer settings start with easyPlace. A list with all settings can be found in the readme.md file.
In the Hotkeys tab you can change the hotkey for enabling the printer.
Good luck!

[wyemhu12]

Hey, the shortcut for opening the config menu is m + c or , + c depending on your keyboard. Here you can find both the litematica settings and the printer settings. All printer settings start with easyPlace. A list with all settings can be found in the readme.md file. In the Hotkeys tab you can change the hotkey for enabling the printer. Good luck!

So after a while testing, I cannot use the mod in the server. The admin said they did not disable anything. Do you have any solution?
When I tried to place a block down, it said " Action prevented by Easy Place mode". I got the same message in Single player, but I can still print.

[jensvh]

Could you send me the server ip? Then I could run some tests.

[aria1th]

Its message is from ActionResult.FAIL, so instead of returning actionresult, doing continue; solves most of the problem.
Printer stopping working might mean you're trying to send packet but channel is clogged for some reason : possible reason is,

1. You've set max interaction too big / delay too small.
2. Server does not allow packets in weird way and packet is just being blocked.
3. You're trying to interact over reach distance?

[wyemhu12]

Could you send me the server ip? Then I could run some tests.

It is a server with mod pack. I tried on 1.12 and it works. But on 1.16.5, its not.
Direwolf20 1.16 Server IP: dw16.craftersland.net

[wyemhu12]

Its message is from ActionResult.FAIL, so instead of returning actionresult, doing continue; solves most of the problem. Printer stopping working might mean you're trying to send packet but channel is clogged for some reason : possible reason is,

1. You've set max interaction too big / delay too small.
2. Server does not allow packets in weird way and packet is just being blocked.
3. You're trying to interact over reach distance?

I think >2 have biggest chance. I'm using default values.

[jensvh]

I'm currently struggling to install the Direwolf20 modpack with litematica to join the server.
Could you try the following printer settings:

• set easyPlaceModeRange (both x,y and z) to 6
• set easyPlaceModeMaxBlocks to 1
• set easyPlaceModeDelay to 0.1
• set easyPlaceModePaper to true
  Those settings bypass most anti-cheats.