Replies: 4 comments 3 replies
-
|
it does not make a difference in using local csv versus the online files when using the same base. but anyway, it seems the heating circuit is not very talkative, as it only sends some broadcast and hc messages on its own. so you'd probably have to check for the other messages that are available (and there are at least some in https://github.com/john30/ebusd-configuration/blob/master/src/wolf/08..hc.tsp which was loaded). maybe someone else already has better definitions for this particular heating circuit (I don't know how good the 08..hc fits to it to be honest) |
Beta Was this translation helpful? Give feedback.
-
|
Is there any way i can support you guys to implement the messages my heating unit sends? How you guys are "decrypting" those messages? I do have an "EBC 100 eBus Koppler USB" laying around and linux/windows/mac plattforms. If you can give me a hint, how i can support i am happyto do so! =) |
Beta Was this translation helpful? Give feedback.
-
|
Here's a How-To: And here's a shortcut if you ware using a Wolf heating: |
Beta Was this translation helpful? Give feedback.
-
|
I am experiencing the exact same issues as described in this discussion with my Wolf CGB-20. Like @ps915, I see MF scan encode failed and cannot get sensor values. It seems the mapping between the detected Kromschröder ID (50) and the Wolf CSV files (08/10) is broken in the latest micro-ebusd firmware. |
Beta Was this translation helpful? Give feedback.
-
|
I managed to pull the manual identification strings via REPL. Even though the auto-scan says MF failed, the hardware is responding. My System: GA 10: BAI / HCM (Wolf Mainboard) [2025-12-31] GA 08: BM-2 (Wolf Programming Module) [2025-12-31] Identification String for GA 08 (BM-2): Command: The "Config Path" issue: In this firmware version, the "Config path" field is hidden in the Web UI. The logs show 404 errors because the adapter is looking for 5008..hc.ead (Manufacturer 50), but the repository seems to store them as 08..hc.tsp. Could you please verify why the micro-ebusd decoder throws a range error for the Wolf/Kromschröder ID and if the mapping for Manufacturer 50 can be updated to point to the correct Wolf files? |
Beta Was this translation helpful? Give feedback.
-
|
Hello, did you manage to point correct Wolf files via micro-ebusd? |
Beta Was this translation helpful? Give feedback.
-
|
dears, |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Hi ebusd Community,
i try to connect my WOLF CGB(-K)-20 Gastherme to ebusd, but i am about to give up.
The only data i got from my Wolf Therme is:
Topic: ebusd/hc/Operation:
Topic: ebusd/hc/RcTarget:
With micro-ebusd, i got no sensor values at all. I also tried to use local .tsp files (https://github.com/john30/ebusd-configuration/tree/master/src/wolf) but also that did not work! :(
Maybe someone can help me. 😢🆘
My Setup:
Configuration of the Shield C6
ebusd connected: "yes (inactive)" and sometimes "yes"
eBUS signal: acquired
MQTT connected: yes, topic: ebusd
Home Assistant: offline
Logfile after Shield boot
``` 2025-12-30T10:15:07.576Z I esp-rest: restart requested 2025-12-30T10:15:07.585Z I exec: after -o -m 500 0 restart 2025-12-30T10:15:07.586Z I time trigger installed 2025-12-30T10:15:08.086Z I exec: restart 2025-12-30T10:15:08.086Z I reboot: Rebooting 2025-12-30T10:15:08.086Z W ebus: shutting down 2025-12-30T10:15:08.087Z E read_host_tcp: recv: errno 128 2025-12-30T10:15:08.088Z I close_client: socket closed 2025-12-30T10:15:08.088Z I close_client: socket closed 2025-12-30T10:15:08.285Z W ebus: proto up 2025-12-30T10:15:08.288Z W cmd_wifi: sta disconnect, reason 8, reconnect... 2025-12-30T10:15:08.289Z E mqtt_client: esp_mqtt_handle_transport_read_error: transport_read() error: errno=113 2025-12-30T10:15:08.289Z E mqtt: tls error 0x0, stack error 0x0, errno 113 (Software caused connection abort) 2025-12-30T10:15:08.289Z E mqtt_client: mqtt_process_receive: mqtt_message_receive() returned -2 2025-12-30T10:15:08.290Z W mqtt: disconnected 2025-12-30T10:15:08.290Z W httpd_txrx: httpd_sock_err: error in recv : 113 2025-12-30T10:15:08.290Z I repl_event_task: mqtt event: 0 2025-12-30T10:15:08.290Z I repl_event_task: sta event: 0 2025-12-30T10:15:08.290Z I exec: ledb 0 2025-12-30T10:15:08.291Z I exec: strip -b 0 2025-12-30T10:15:09.297Z W repl: recovered 20 log entries 2025-12-30T10:15:09.297Z I repl: reboot 11 (3), using retained memory for logging 2025-12-30T10:15:09.315Z I memvfs: blocks ^^^^^^^^^^^^^^, 0 valid, 14 free, 0 deleted, 14 total, used x0, damaged x0 2025-12-30T10:15:10.095Z I �[5n 2025-12-30T10:15:10.095Z I exec: running cmds from '/data/boot.eas' 2025-12-30T10:15:10.096Z I exec: strip -m 1 -b 255 2025-12-30T10:15:10.098Z I exec: function ledb "@strip -b" 2025-12-30T10:15:10.098Z I function 'ledb' installed 2025-12-30T10:15:10.098Z I exec: function ledg "@strip -g" 2025-12-30T10:15:10.099Z I function 'ledg' installed 2025-12-30T10:15:10.099Z I exec: led -p 16 -i 0 255 2025-12-30T10:15:10.100Z I 0 duty set to 254 2025-12-30T10:15:10.100Z I exec: function ledboot "@led 0" 2025-12-30T10:15:10.100Z I function 'ledboot' installed 2025-12-30T10:15:10.100Z I exec: function leds "@strip -b" "@led 0" 2025-12-30T10:15:10.100Z I function 'leds' installed 2025-12-30T10:15:10.101Z I exec: io -iue 9 2025-12-30T10:15:10.101Z I IO 9 direction set to 01 2025-12-30T10:15:10.100Z I IO 9 pull set to 00 2025-12-30T10:15:10.100Z I IO 9 = 1 2025-12-30T10:15:10.100Z I exec: io -iu 6 2025-12-30T10:15:10.101Z I IO 6 direction set to 01 2025-12-30T10:15:10.101Z I IO 6 pull set to 00 2025-12-30T10:15:10.101Z I IO 6 = 1 2025-12-30T10:15:10.101Z I exec: successfully ran 8/8 cmds from '/data/boot.eas' 2025-12-30T10:15:10.102Z I exec: running cmds from '/data/main.eas' 2025-12-30T10:15:10.103Z I exec: var skipstart 0 2025-12-30T10:15:10.103Z I exec: leds 255 0 700 2025-12-30T10:15:10.103Z I exec: strip -b 255 0 700 2025-12-30T10:15:10.103Z I exec: led 0 255 0 700 2025-12-30T10:15:10.104Z I 0 duty set to 254 2025-12-30T10:15:10.105Z I exec: sleep 1000 2025-12-30T10:15:10.105Z I main_task: Returned from app_main() 2025-12-30T10:15:11.106Z I exec: if "isio -l 9" "var skipstart 1" 2025-12-30T10:15:11.106Z I exec: isio -l 9 2025-12-30T10:15:11.107Z I IO 9 level 1 is unmet 2025-12-30T10:15:11.107Z I exec: leds 255 0 700 2025-12-30T10:15:11.107Z I exec: strip -b 255 0 700 2025-12-30T10:15:11.107Z I exec: led 0 255 0 700 2025-12-30T10:15:11.107Z I 0 duty set to 254 2025-12-30T10:15:11.108Z I exec: sleep 1000 2025-12-30T10:15:12.111Z I exec: if "isio -l 9" "var skipstart 1" 2025-12-30T10:15:12.111Z I exec: isio -l 9 2025-12-30T10:15:12.112Z I IO 9 level 1 is unmet 2025-12-30T10:15:12.112Z I exec: leds 255 0 700 2025-12-30T10:15:12.112Z I exec: strip -b 255 0 700 2025-12-30T10:15:12.112Z I exec: led 0 255 0 700 2025-12-30T10:15:12.112Z I 0 duty set to 254 2025-12-30T10:15:12.113Z I exec: sleep 1000 2025-12-30T10:15:13.116Z I exec: if "isio -l 9" "var skipstart 1" 2025-12-30T10:15:13.116Z I exec: isio -l 9 2025-12-30T10:15:13.117Z I IO 9 level 1 is unmet 2025-12-30T10:15:13.117Z I exec: var rpi 0 2025-12-30T10:15:13.117Z I exec: if "var -q stick" else "if \"isio -l 6\" \"var rpi 1\"" 2025-12-30T10:15:13.117Z I exec: var -q stick 2025-12-30T10:15:13.117Z I exec: if "isio -l 6" "var rpi 1" 2025-12-30T10:15:13.118Z I exec: isio -l 6 2025-12-30T10:15:13.119Z I IO 6 level 1 is unmet 2025-12-30T10:15:13.119Z I exec: var isnew 1 2025-12-30T10:15:13.119Z I exec: if "§isnvs ebus.host" "var isnew 0" 2025-12-30T10:15:13.119Z I exec: isnvs ebus.host 2025-12-30T10:15:13.120Z I exec: var isnew 0 2025-12-30T10:15:13.120Z I variable isnew = 0 2025-12-30T10:15:13.120Z I exec: if "§isnvs sta.on" "var isnew 0" 2025-12-30T10:15:13.121Z I exec: isnvs sta.on 2025-12-30T10:15:13.121Z I exec: var isnew 0 2025-12-30T10:15:13.121Z I exec: if "§isnvs eth.on" "var isnew 0" 2025-12-30T10:15:13.121Z I exec: isnvs eth.on 2025-12-30T10:15:13.122Z W exec: cmd failed: isnvs eth.on = 1 2025-12-30T10:15:13.122Z I exec: on -lo iol 9 "leds 255" "sleep 500" restart 2025-12-30T10:15:13.122Z I io trigger installed 2025-12-30T10:15:13.122Z I exec: on iol 9 "ledboot 50 0" 2025-12-30T10:15:13.122Z I io trigger installed 2025-12-30T10:15:13.123Z I exec: function start "ledg 50 0 3000" syslog server mqtt 2025-12-30T10:15:13.123Z I function 'start' installed 2025-12-30T10:15:13.123Z I exec: var wps 0 2025-12-30T10:15:13.124Z I exec: on -o wifi 1 start "if \"var -q wps\" \"ledboot 0\"" 2025-12-30T10:15:13.124Z I network trigger installed 2025-12-30T10:15:13.124Z I exec: on -o eth 1 start 2025-12-30T10:15:13.124Z I network trigger installed 2025-12-30T10:15:13.125Z I exec: on wifi 0 "ledb 0" 2025-12-30T10:15:13.125Z I network trigger installed 2025-12-30T10:15:13.125Z I exec: on eth 0 "ledb 0" 2025-12-30T10:15:13.125Z I network trigger installed 2025-12-30T10:15:13.126Z I exec: on -o server 2 "after -o -m 500 0 restart" 2025-12-30T10:15:13.126Z I server trigger installed 2025-12-30T10:15:13.126Z I exec: function chkota "ota -t" 2025-12-30T10:15:13.126Z I function 'chkota' installed 2025-12-30T10:15:13.127Z I exec: on -o mqtt 1 "after -o 300 chkota" "after 86400 chkota" 2025-12-30T10:15:13.127Z I network trigger installed 2025-12-30T10:15:13.127Z I exec: if "var -q skipstart" "ledb 255 0 5000" "ledboot 50" "ap EBUS" start exit 2025-12-30T10:15:13.128Z I exec: var -q skipstart 2025-12-30T10:15:13.128Z I exec: if "isnvs sta.on" "ledb 10 255 5000" "sleep 100" sta 2025-12-30T10:15:13.128Z I exec: isnvs sta.on 2025-12-30T10:15:13.129Z I exec: ledb 10 255 5000 2025-12-30T10:15:13.131Z I exec: strip -b 10 255 5000 2025-12-30T10:15:13.131Z I exec: sleep 100 2025-12-30T10:15:13.234Z I exec: sta 2025-12-30T10:15:13.330Z I sta connecting to 'wifiname' 2025-12-30T10:15:15.964Z I cmd_wifi: sta connect 2025-12-30T10:15:17.235Z I esp_netif_handlers: sta ip: 192.168.0.84, mask: 255.255.255.0, gw: 192.168.0.1 2025-12-30T10:15:17.235Z I cmd_wifi: sta got ip 2025-12-30T10:15:17.235Z I repl_event_task: sta event: 1 2025-12-30T10:15:17.235Z I exec: start 2025-12-30T10:15:17.235Z I exec: ledg 50 0 3000 2025-12-30T10:15:17.235Z I exec: strip -g 50 0 3000 2025-12-30T10:15:17.236Z I exec: syslog 2025-12-30T10:15:17.237Z I exec: server 2025-12-30T10:15:17.244Z I mdns_mem: mDNS task will be created from internal RAM 2025-12-30T10:15:17.245Z I exec: function wpsbtnnew "on iol 9 \"sta -w\" \"ledboot 50\" \"var -q wps 1\"" 2025-12-30T10:15:17.245Z I function 'wpsbtnnew' installed 2025-12-30T10:15:17.246Z I exec: if "var -q isnew" "ap EBUS" wpsbtnnew else "if \"isnvs ap.on\" ap" 2025-12-30T10:15:17.246Z I exec: var -q isnew 2025-12-30T10:15:17.246Z I exec: if "isnvs ap.on" ap 2025-12-30T10:15:17.246Z I exec: isnvs ap.on 2025-12-30T10:15:17.247Z I exec: var eth 0 2025-12-30T10:15:17.247Z I exec: function chkethw "if \"eth -wt\" \"var eth 2\"" 2025-12-30T10:15:17.247Z I function 'chkethw' installed 2025-12-30T10:15:17.248Z I exec: function chketh "if \"eth -t\" \"var eth 1\" else chkethw" 2025-12-30T10:15:17.248Z I function 'chketh' installed 2025-12-30T10:15:17.248Z I exec: if "!isnvs eth.skip" chketh 2025-12-30T10:15:17.248Z I exec: isnvs eth.skip 2025-12-30T10:15:17.249Z W exec: cmd failed: isnvs eth.skip = 1 2025-12-30T10:15:17.249Z I exec: chketh 2025-12-30T10:15:17.249Z I exec: if "eth -t" "var eth 1" else chkethw 2025-12-30T10:15:17.249Z I exec: eth -t 2025-12-30T10:15:17.251Z I mdns: mdns configured 2025-12-30T10:15:17.252Z I esp-rest: Starting HTTP Server 2025-12-30T10:15:17.253Z I server started 2025-12-30T10:15:17.253Z I exec: mqtt 2025-12-30T10:15:17.257Z I MQTT client started 2025-12-30T10:15:17.257Z I exec: if "var -q wps" "ledboot 0" 2025-12-30T10:15:17.257Z I exec: var -q wps 2025-12-30T10:15:17.274Z I mqtt: connected 2025-12-30T10:15:17.274Z I mqtt: subscribed topic 36459 ebusd/# 2025-12-30T10:15:17.275Z I mqtt: subscribed topic 64315 homeassistant/status 2025-12-30T10:15:17.275Z I repl_event_task: mqtt event: 1 2025-12-30T10:15:17.275Z I exec: after -o 300 chkota 2025-12-30T10:15:17.276Z I time trigger installed 2025-12-30T10:15:17.276Z I exec: after 86400 chkota 2025-12-30T10:15:17.276Z I time trigger installed 2025-12-30T10:15:17.682Z I sntp: got NTP time: 2025-12-30 10:15:18 2025-12-30T10:15:18.255Z I Ethernet on USR-ES1 not available 2025-12-30T10:15:18.255Z W exec: cmd failed: eth -t = 1 2025-12-30T10:15:18.256Z I exec: io -a 2025-12-30T10:15:18.257Z I 0 duty set to 0 2025-12-30T10:15:18.258Z I exec: function chkethcfg "if \"eth -c\" \"var eth 1\"" 2025-12-30T10:15:18.258Z I function 'chkethcfg' installed 2025-12-30T10:15:18.259Z I exec: if "!var -q isnew" "if \"!var -q eth\" chkethcfg" 2025-12-30T10:15:18.259Z I exec: var -q isnew 2025-12-30T10:15:18.259Z I exec: if "!var -q eth" chkethcfg 2025-12-30T10:15:18.259Z I exec: var -q eth 2025-12-30T10:15:18.259Z I exec: chkethcfg 2025-12-30T10:15:18.259Z I exec: if "eth -c" "var eth 1" 2025-12-30T10:15:18.259Z I exec: eth -c 2025-12-30T10:15:18.260Z W exec: cmd failed: eth -c = 1 2025-12-30T10:15:18.260Z I exec: function enet eth "leds 50" "if \"!isnvs sta.on\" \"sta -o\"" 2025-12-30T10:15:18.261Z I function 'enet' installed 2025-12-30T10:15:18.261Z I exec: if "isnvs eth.on" "if \"var -q eth\" enet" 2025-12-30T10:15:18.261Z I exec: isnvs eth.on 2025-12-30T10:15:18.262Z W exec: cmd failed: isnvs eth.on = 1 2025-12-30T10:15:18.262Z I exec: watch 2025-12-30T10:15:18.263Z I exec: if "isnvs ebus.host" ebus exit 2025-12-30T10:15:18.263Z I exec: isnvs ebus.host 2025-12-30T10:15:18.263Z I exec: ebus 2025-12-30T10:15:18.265Z I ebus: switching to enhanced mode on TCP port (with bitrate deviation 0 and enhanced arbitration delay 200 us) 2025-12-30T10:15:18.265Z I setup_ebus_host_tcp: listening on port 9999 2025-12-30T10:15:18.265Z I setup_uart: eBUS UART 1 on TX=15(inv) RX=14(inv) with 2400 Bd 2025-12-30T10:15:18.267Z I mdns: service added 2025-12-30T10:15:18.267Z I exec: exit 2025-12-30T10:15:18.267Z I exec: successfully ran 42/42 cmds from '/data/main.eas' 2025-12-30T10:15:18.266Z I 2025-12-30T10:15:22.491Z I wait_host_tcp: accepted: 192.168.0.140 2025-12-30T10:15:22.491Z I ebus: host reset 2025-12-30T10:15:24.943Z I getTemperature: calibration 14.2 ```Configuration of eBUSd Addon
Logfile after Addon start
``` > ebusd --foreground --mqtthost=core-mosquitto --mqttport=1883 --mqttuser=addons --mqttpass=tai9Bo0eezie4ood1wuMeigheGoonae3eileghahcihohPh5siech1heeCieshe9 --scanconfig --mqttjson --latency=10 --mqttint=/etc/ebusd/mqtt-hassio.cfg --mqtttopic=ebusd --device=ens:192.168.0.84:9999 --log=all:debug 2025-12-30 11:17:31.276 [network debug] SSL state 0=before SSL initialization: type 0x10=start, val 1=? 2025-12-30 11:17:31.276 [network debug] SSL state 0=before SSL initialization: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.276 [network debug] SSL BIO state 2 res -1 2025-12-30 11:17:31.295 [network debug] SSL BIO state 3 res 1 2025-12-30 11:17:31.295 [network debug] SSL BIO state 4 res 3 2025-12-30 11:17:31.295 [network debug] SSL BIO state 6 res 0 2025-12-30 11:17:31.295 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:31.315 [network debug] SSL BIO state 5 res -1 2025-12-30 11:17:31.315 [network debug] SSL BIO state 5 res 1 2025-12-30 11:17:31.315 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.315 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:31.335 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.336 [network debug] SSL state 3=SSLv3/TLS read server hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.336 [network debug] SSL state 42=TLSv1.3 read encrypted extensions: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.336 [network debug] SSL state 4=SSLv3/TLS read server certificate: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.336 [network debug] SSL state 43=TLSv1.3 read server certificate verify: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.336 [network debug] SSL state 12=SSLv3/TLS read finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.336 [network debug] SSL state 18=SSLv3/TLS write change cipher spec: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.336 [network debug] SSL state 20=SSLv3/TLS write finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.336 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x20=done, val 1=? 2025-12-30 11:17:31.337 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:31.337 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.337 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.337 [network debug] SSL state 10=SSLv3/TLS read server session ticket: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.337 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:31.377 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x4008=write,alert, val 256=close notify 2025-12-30 11:17:31.377 [main info] configPath URL is valid 2025-12-30 11:17:31.385 [device notice] transport opened 2025-12-30 11:17:31.385 [main info] registering data handlers 2025-12-30 11:17:31.386 [mqtt info] mosquitto version 2.0.20 (compiled with 2.0.20) 2025-12-30 11:17:31.386 [mqtt debug] connection requested 2025-12-30 11:17:31.386 [main info] registered data handlers 2025-12-30 11:17:31.386 [main notice] ebusd 25.1.p20250414 started with broadcast scan on device: 192.168.0.84:9999, TCP, enhanced 2025-12-30 11:17:31.386 [main info] loading configuration files from https://ebus.github.io/de/ 2025-12-30 11:17:31.386 [network debug] SSL state 0=before SSL initialization: type 0x10=start, val 1=? 2025-12-30 11:17:31.386 [network debug] SSL state 0=before SSL initialization: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.386 [network debug] SSL BIO state 2 res -1 2025-12-30 11:17:31.386 [network debug] SSL BIO state 3 res 1 2025-12-30 11:17:31.386 [network debug] SSL BIO state 4 res 7 2025-12-30 11:17:31.386 [network debug] SSL BIO state 6 res 0 2025-12-30 11:17:31.386 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:31.407 [network debug] SSL BIO state 5 res -1 2025-12-30 11:17:31.407 [network debug] SSL BIO state 5 res 1 2025-12-30 11:17:31.407 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.407 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:31.427 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.427 [network debug] SSL state 3=SSLv3/TLS read server hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.427 [network debug] SSL state 42=TLSv1.3 read encrypted extensions: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.428 [network debug] SSL state 4=SSLv3/TLS read server certificate: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.428 [network debug] SSL state 43=TLSv1.3 read server certificate verify: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.428 [network debug] SSL state 12=SSLv3/TLS read finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.428 [network debug] SSL state 18=SSLv3/TLS write change cipher spec: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.428 [network debug] SSL state 20=SSLv3/TLS write finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.428 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x20=done, val 1=? 2025-12-30 11:17:31.428 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:31.428 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.428 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.428 [network debug] SSL state 10=SSLv3/TLS read server session ticket: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.428 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:31.468 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x4008=write,alert, val 256=close notify 2025-12-30 11:17:31.468 [main info] reading file broadcast.csv 2025-12-30 11:17:31.469 [network debug] SSL state 0=before SSL initialization: type 0x10=start, val 1=? 2025-12-30 11:17:31.469 [network debug] SSL state 0=before SSL initialization: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.469 [network debug] SSL BIO state 2 res -1 2025-12-30 11:17:31.469 [network debug] SSL BIO state 3 res 1 2025-12-30 11:17:31.469 [network debug] SSL BIO state 4 res 7 2025-12-30 11:17:31.469 [network debug] SSL BIO state 6 res 0 2025-12-30 11:17:31.469 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:31.489 [network debug] SSL BIO state 5 res -1 2025-12-30 11:17:31.489 [network debug] SSL BIO state 5 res 1 2025-12-30 11:17:31.489 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.489 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:31.510 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.510 [network debug] SSL state 3=SSLv3/TLS read server hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.510 [network debug] SSL state 42=TLSv1.3 read encrypted extensions: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.511 [network debug] SSL state 4=SSLv3/TLS read server certificate: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.511 [network debug] SSL state 43=TLSv1.3 read server certificate verify: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.511 [network debug] SSL state 12=SSLv3/TLS read finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.511 [network debug] SSL state 18=SSLv3/TLS write change cipher spec: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.511 [network debug] SSL state 20=SSLv3/TLS write finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.511 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x20=done, val 1=? 2025-12-30 11:17:31.511 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:31.511 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.511 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.511 [network debug] SSL state 10=SSLv3/TLS read server session ticket: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.511 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:31.551 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x4008=write,alert, val 256=close notify 2025-12-30 11:17:31.552 [main info] successfully read file broadcast.csv 2025-12-30 11:17:31.552 [main info] reading file memory.csv 2025-12-30 11:17:31.552 [network debug] SSL state 0=before SSL initialization: type 0x10=start, val 1=? 2025-12-30 11:17:31.552 [network debug] SSL state 0=before SSL initialization: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.552 [network debug] SSL BIO state 2 res -1 2025-12-30 11:17:31.553 [network debug] SSL BIO state 3 res 1 2025-12-30 11:17:31.553 [network debug] SSL BIO state 4 res 7 2025-12-30 11:17:31.553 [network debug] SSL BIO state 6 res 0 2025-12-30 11:17:31.553 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:31.573 [network debug] SSL BIO state 5 res -1 2025-12-30 11:17:31.573 [network debug] SSL BIO state 5 res 1 2025-12-30 11:17:31.573 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.573 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:31.593 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.593 [network debug] SSL state 3=SSLv3/TLS read server hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.593 [network debug] SSL state 42=TLSv1.3 read encrypted extensions: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.594 [network debug] SSL state 4=SSLv3/TLS read server certificate: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.594 [network debug] SSL state 43=TLSv1.3 read server certificate verify: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.594 [network debug] SSL state 12=SSLv3/TLS read finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.594 [network debug] SSL state 18=SSLv3/TLS write change cipher spec: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.594 [network debug] SSL state 20=SSLv3/TLS write finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.594 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x20=done, val 1=? 2025-12-30 11:17:31.594 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:31.595 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.595 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.595 [network debug] SSL state 10=SSLv3/TLS read server session ticket: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:31.595 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:31.635 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x4008=write,alert, val 256=close notify 2025-12-30 11:17:31.635 [main info] successfully read file memory.csv 2025-12-30 11:17:31.635 [main info] read config files, got 17 messages 2025-12-30 11:17:31.635 [bus notice] bus started with own address 31/36 2025-12-30 11:17:31.635 [device notice] reset, supports info 2025-12-30 11:17:31.635 [bus notice] signal acquired 2025-12-30 11:17:31.641 [device notice] extra info: firmware 1.1[5c0e].1[5c0e], jumpers 0x0b 2025-12-30 11:17:31.879 [mqtt notice] connection established 2025-12-30 11:17:31.879 [mqtt debug] publish ebusd/global/version "ebusd 25.1.p20250414" 2025-12-30 11:17:31.879 [mqtt debug] publish ebusd/global/running true 2025-12-30 11:17:31.879 [mqtt debug] publish ebusd/global/running true 2025-12-30 11:17:33.068 [bus notice] new master 70, master count 2 2025-12-30 11:17:33.153 [update info] received MS cmd: 7051501407033328001e0078 / 090003b32e00d8145a00 2025-12-30 11:17:33.153 [update notice] received unknown MS cmd: 7051501407033328001e0078 / 090003b32e00d8145a00 2025-12-30 11:17:35.024 [bus notice] new master 10, master count 3 2025-12-30 11:17:35.032 [bus notice] new master 03, master count 4 2025-12-30 11:17:35.032 [update info] received MM cmd: 1003050709bb0523030080ff78ff 2025-12-30 11:17:35.032 [update notice] received unknown MM cmd: 1003050709bb0523030080ff78ff 2025-12-30 11:17:35.324 [bus notice] new master f1, master count 5 2025-12-30 11:17:35.324 [update info] received BC cmd: f1fe050308010100ff74ff3a00 2025-12-30 11:17:35.324 [update notice] received unknown BC cmd: f1fe050308010100ff74ff3a00 2025-12-30 11:17:35.916 [network info] [00001] client connection opened 127.0.0.1 2025-12-30 11:17:35.916 [network info] [00001] connection closed 2025-12-30 11:17:36.917 [network debug] dead connection removed - 0 2025-12-30 11:17:38.735 [update info] received BC cmd: 03fe0503080100400064283a00 2025-12-30 11:17:38.735 [update notice] received unknown BC cmd: 03fe0503080100400064283a00 2025-12-30 11:17:39.976 [update info] received MM cmd: 1003080008333200008003003c 2025-12-30 11:17:39.976 [update notice] received unknown MM cmd: 1003080008333200008003003c 2025-12-30 11:17:40.268 [update info] received BC cmd: f1fe08000833324dfe0000003c 2025-12-30 11:17:40.268 [update notice] received update-read Broadcast RcTarget QQ=f1: 50.199;-1.699;0;0;0;60.000 2025-12-30 11:17:41.636 [main debug] performing regular tasks 2025-12-30 11:17:41.636 [main notice] starting initial broadcast scan 2025-12-30 11:17:41.636 [bus info] send message: 31fe07fe00 2025-12-30 11:17:41.666 [bus debug] start request 31 2025-12-30 11:17:41.666 [bus debug] arbitration start with 31 2025-12-30 11:17:41.716 [bus debug] arbitration won 2025-12-30 11:17:41.716 [bus debug] arbitration delay 2 micros 2025-12-30 11:17:41.716 [bus info] arbitration delay 2 - 2 micros 2025-12-30 11:17:41.716 [bus debug] switching from ready to send command 2025-12-30 11:17:41.725 [bus debug] send/receive symbol latency 9 ms 2025-12-30 11:17:41.725 [bus info] send/receive symbol latency 9 - 9 ms 2025-12-30 11:17:41.732 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:17:41.732 [bus info] send/receive symbol latency 7 - 9 ms 2025-12-30 11:17:41.740 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:17:41.748 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:17:41.748 [bus debug] switching from send command to send command CRC 2025-12-30 11:17:41.758 [bus debug] send/receive symbol latency 9 ms 2025-12-30 11:17:41.758 [update info] sent BC cmd: 31fe07fe00 2025-12-30 11:17:41.758 [update notice] sent write Broadcast Queryexistence QQ=31: 2025-12-30 11:17:41.758 [bus debug] notify request: done 2025-12-30 11:17:41.758 [bus debug] read res: 2025-12-30 11:17:41.758 [bus debug] switching from send command CRC to send SYN 2025-12-30 11:17:41.764 [bus debug] send/receive symbol latency 6 ms 2025-12-30 11:17:41.764 [bus info] send/receive symbol latency 6 - 9 ms 2025-12-30 11:17:41.764 [bus debug] switching from send SYN to ready 2025-12-30 11:17:41.792 [update info] received BC cmd: 03fe07ff00 2025-12-30 11:17:41.792 [update notice] received update-read Broadcast Signoflife QQ=03: 2025-12-30 11:17:42.378 [mqtt debug] publish ebusd/Broadcast/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": -1.699}, "forced": {"value": 0}, "hwc": {"value": 0}, "hc": {"value": 0}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:17:42.378 [mqtt debug] publish ebusd/Broadcast/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": -1.699}, "forced": {"value": 0}, "hwc": {"value": 0}, "hc": {"value": 0}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:17:43.067 [update info] received MS cmd: 7051501407033328001e0078 / 0900034d2e00d8145a00 2025-12-30 11:17:43.067 [update notice] received unknown MS cmd: 7051501407033328001e0078 / 0900034d2e00d8145a00 2025-12-30 11:17:44.977 [update info] received MM cmd: 1003050709bb0123030080ff78ff 2025-12-30 11:17:44.977 [update notice] received unknown MM cmd: 1003050709bb0123030080ff78ff 2025-12-30 11:17:45.267 [update info] received BC cmd: f1fe050308010100ff64ff3a00 2025-12-30 11:17:45.267 [update notice] received unknown BC cmd: f1fe050308010100ff64ff3a00 2025-12-30 11:17:47.384 [mqtt debug] publish ebusd/global/uptime 16 2025-12-30 11:17:47.384 [mqtt debug] publish ebusd/global/uptime 16 2025-12-30 11:17:47.384 [mqtt debug] publish homeassistant/binary_sensor/ebusd_global_running/config { "unique_id":"ebusd_global_running", "device":{ "identifiers":"ebusd", "manufacturer":"ebusd.eu", "name":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "state_topic":"ebusd/global/running", "name":"global running", "device_class":"running", "payload_on":"true", "payload_off":"false" } 2025-12-30 11:17:47.384 [mqtt debug] publish homeassistant/binary_sensor/ebusd_global_running/config { "unique_id":"ebusd_global_running", "device":{ "identifiers":"ebusd", "manufacturer":"ebusd.eu", "name":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "state_topic":"ebusd/global/running", "name":"global running", "device_class":"running", "payload_on":"true", "payload_off":"false" } 2025-12-30 11:17:47.384 [mqtt debug] publish homeassistant/binary_sensor/ebusd_global_signal/config { "unique_id":"ebusd_global_signal", "device":{ "identifiers":"ebusd", "manufacturer":"ebusd.eu", "name":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "state_topic":"ebusd/global/signal", "name":"global signal", "device_class":"connectivity", "payload_on":"true", "payload_off":"false" } 2025-12-30 11:17:47.384 [mqtt debug] publish homeassistant/binary_sensor/ebusd_global_signal/config { "unique_id":"ebusd_global_signal", "device":{ "identifiers":"ebusd", "manufacturer":"ebusd.eu", "name":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "state_topic":"ebusd/global/signal", "name":"global signal", "device_class":"connectivity", "payload_on":"true", "payload_off":"false" } 2025-12-30 11:17:47.384 [mqtt debug] publish homeassistant/sensor/ebusd_global_uptime/config { "unique_id":"ebusd_global_uptime", "device":{ "identifiers":"ebusd", "manufacturer":"ebusd.eu", "name":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "state_topic":"ebusd/global/uptime", "name":"global uptime", "device_class":"duration", "state_class":"total_increasing", "unit_of_measurement":"s" } 2025-12-30 11:17:47.384 [mqtt debug] publish homeassistant/sensor/ebusd_global_uptime/config { "unique_id":"ebusd_global_uptime", "device":{ "identifiers":"ebusd", "manufacturer":"ebusd.eu", "name":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "state_topic":"ebusd/global/uptime", "name":"global uptime", "device_class":"duration", "state_class":"total_increasing", "unit_of_measurement":"s" } 2025-12-30 11:17:47.384 [mqtt debug] publish homeassistant/update/ebusd_global_updatecheck/config { "unique_id":"ebusd_global_updatecheck", "device":{ "identifiers":"ebusd", "manufacturer":"ebusd.eu", "name":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "state_topic":"ebusd/global/updatecheck", "name":"global updatecheck", "value_template":"{% set my_new = value_json|truncate(255)|regex_replace(find=',.*| available|revision v|version v|OK',replace='') %}{% if my_new == '' %}{% set my_new = '25.1' %}{% endif %}{{ {'installed_version':'25.1','latest_version':my_new,'entity_picture':'https://ebusd.eu/logo-32x32.png','release_url':'https://github.com/john30/ebusd/releases/latest'} | tojson }}" } 2025-12-30 11:17:47.384 [mqtt debug] publish homeassistant/update/ebusd_global_updatecheck/config { "unique_id":"ebusd_global_updatecheck", "device":{ "identifiers":"ebusd", "manufacturer":"ebusd.eu", "name":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "state_topic":"ebusd/global/updatecheck", "name":"global updatecheck", "value_template":"{% set my_new = value_json|truncate(255)|regex_replace(find=',.*| available|revision v|version v|OK',replace='') %}{% if my_new == '' %}{% set my_new = '25.1' %}{% endif %}{{ {'installed_version':'25.1','latest_version':my_new,'entity_picture':'https://ebusd.eu/logo-32x32.png','release_url':'https://github.com/john30/ebusd/releases/latest'} | tojson }}" } 2025-12-30 11:17:47.384 [mqtt debug] publish homeassistant/update/ebusd_global_updatecheck_device/config { "unique_id":"ebusd_global_updatecheck_device", "device":{ "identifiers":"ebusd_device", "manufacturer":"ebusd.eu", "name":"ebusd eBUS device", "via_device":"ebusd", "suggested_area":"Heating" }, "state_topic":"ebusd/global/updatecheck", "name":"updatecheck_device", "value_template":"{% set my_new = value_json|truncate(255)|regex_replace(find='^[^,]*|, device firmware |,.*| available',replace='') %}{% set my_ds = 'v31/firmware/' %}{% if my_new is search('up to date') %}{% set my_ds = my_new|regex_replace(find=' .*',replace='/') %}{% set my_new = 'current' %}{% set my_cur = 'current' %}{% else %}{% set my_cur = 'old' %}{% if my_new is search(' ') %}{% set my_ds = my_new|regex_replace(find=' .*',replace='/') %}{% set my_new = my_new|regex_replace(find='.* ',replace='') %}{% else %}{% if my_new == '' %}{% set my_new = 'current' %}{% set my_cur = 'current' %}{% endif %}{% endif %}{% endif %}{{ {'installed_version':my_cur,'latest_version':my_new,'entity_picture':'https://adapter.ebusd.eu/'+my_ds+'favicon.ico','release_url':'https://adapter.ebusd.eu/'+my_ds+'ChangeLog'} | tojson }}" } 2025-12-30 11:17:47.384 [mqtt debug] publish homeassistant/update/ebusd_global_updatecheck_device/config { "unique_id":"ebusd_global_updatecheck_device", "device":{ "identifiers":"ebusd_device", "manufacturer":"ebusd.eu", "name":"ebusd eBUS device", "via_device":"ebusd", "suggested_area":"Heating" }, "state_topic":"ebusd/global/updatecheck", "name":"updatecheck_device", "value_template":"{% set my_new = value_json|truncate(255)|regex_replace(find='^[^,]*|, device firmware |,.*| available',replace='') %}{% set my_ds = 'v31/firmware/' %}{% if my_new is search('up to date') %}{% set my_ds = my_new|regex_replace(find=' .*',replace='/') %}{% set my_new = 'current' %}{% set my_cur = 'current' %}{% else %}{% set my_cur = 'old' %}{% if my_new is search(' ') %}{% set my_ds = my_new|regex_replace(find=' .*',replace='/') %}{% set my_new = my_new|regex_replace(find='.* ',replace='') %}{% else %}{% if my_new == '' %}{% set my_new = 'current' %}{% set my_cur = 'current' %}{% endif %}{% endif %}{% endif %}{{ {'installed_version':my_cur,'latest_version':my_new,'entity_picture':'https://adapter.ebusd.eu/'+my_ds+'favicon.ico','release_url':'https://adapter.ebusd.eu/'+my_ds+'ChangeLog'} | tojson }}" } 2025-12-30 11:17:47.384 [mqtt debug] publish homeassistant/sensor/ebusd_global_scan/config { "unique_id":"ebusd_global_scan", "device":{ "identifiers":"ebusd", "manufacturer":"ebusd.eu", "name":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "state_topic":"ebusd/global/scan", "name":"global scan" } 2025-12-30 11:17:47.384 [mqtt debug] publish homeassistant/sensor/ebusd_global_scan/config { "unique_id":"ebusd_global_scan", "device":{ "identifiers":"ebusd", "manufacturer":"ebusd.eu", "name":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "state_topic":"ebusd/global/scan", "name":"global scan" } 2025-12-30 11:17:47.384 [mqtt debug] publish ebusd/global/signal true 2025-12-30 11:17:47.384 [mqtt debug] publish ebusd/global/signal true 2025-12-30 11:17:47.384 [mqtt debug] publish empty ebusd/Broadcast/Signoflife 2025-12-30 11:17:47.384 [mqtt debug] publish empty ebusd/Broadcast/Signoflife 2025-12-30 11:17:47.384 [mqtt debug] publish empty ebusd/Broadcast/Queryexistence 2025-12-30 11:17:47.384 [mqtt debug] publish empty ebusd/Broadcast/Queryexistence 2025-12-30 11:17:49.936 [update info] received MM cmd: 1003080008333200008003003c 2025-12-30 11:17:49.936 [update notice] received unknown MM cmd: 1003080008333200008003003c 2025-12-30 11:17:50.229 [update info] received BC cmd: f1fe08000833324dfe0000003c 2025-12-30 11:17:50.230 [update notice] received update-read Broadcast RcTarget QQ=f1: 50.199;-1.699;0;0;0;60.000 2025-12-30 11:17:51.758 [main debug] performing regular tasks 2025-12-30 11:17:51.758 [bus info] scan 08 cmd: 3108070400 2025-12-30 11:17:51.762 [bus debug] start request 31 2025-12-30 11:17:51.762 [bus debug] arbitration start with 31 2025-12-30 11:17:51.812 [bus debug] arbitration won 2025-12-30 11:17:51.812 [bus debug] arbitration delay 2 micros 2025-12-30 11:17:51.812 [bus debug] switching from ready to send command 2025-12-30 11:17:51.819 [bus debug] send/receive symbol latency 6 ms 2025-12-30 11:17:51.826 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:17:51.834 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:17:51.849 [bus debug] send/receive symbol latency 14 ms 2025-12-30 11:17:51.849 [bus info] send/receive symbol latency 6 - 14 ms 2025-12-30 11:17:51.849 [bus debug] switching from send command to send command CRC 2025-12-30 11:17:51.857 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:17:51.857 [bus debug] switching from send command CRC to receive command ACK 2025-12-30 11:17:51.868 [bus debug] switching from receive command ACK to receive response 2025-12-30 11:17:51.909 [bus debug] switching from receive response to receive response CRC 2025-12-30 11:17:51.915 [bus debug] switching from receive response CRC to send response ACK 2025-12-30 11:17:51.923 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:17:51.923 [update info] sent MS cmd: 3108070400 / 0a500106334202102d5130 2025-12-30 11:17:51.923 [update notice] store 08 ident: ERR: argument value out of valid range 2025-12-30 11:17:51.923 [update error] unable to parse scan-read scan.08 from 3108070400 / 0a500106334202102d5130: ERR: argument value out of valid range 2025-12-30 11:17:51.923 [bus debug] notify request: done 2025-12-30 11:17:51.923 [bus notice] scan 08: ;Kromschroeder; 3B ; 2025-12-30 11:17:51.923 [bus debug] switching from send response ACK to send SYN 2025-12-30 11:17:51.923 [main error] scan config 08: ERR: argument value out of valid range 2025-12-30 11:17:51.923 [mqtt debug] publish ebusd/global/scan "running" 2025-12-30 11:17:51.923 [mqtt debug] publish ebusd/global/scan "running" 2025-12-30 11:17:51.923 [mqtt debug] publish ebusd/Broadcast/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": -1.699}, "forced": {"value": 0}, "hwc": {"value": 0}, "hc": {"value": 0}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:17:51.923 [mqtt debug] publish ebusd/Broadcast/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": -1.699}, "forced": {"value": 0}, "hwc": {"value": 0}, "hc": {"value": 0}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:17:51.933 [bus debug] send/receive symbol latency 10 ms 2025-12-30 11:17:51.933 [bus debug] switching from send SYN to ready 2025-12-30 11:17:52.925 [mqtt error] decode scan.08 : ERR: argument value out of valid range 2025-12-30 11:17:52.979 [update info] received MS cmd: 7051501407033328001e0078 / 090001b32d00d8145a00 2025-12-30 11:17:52.979 [update notice] received unknown MS cmd: 7051501407033328001e0078 / 090001b32d00d8145a00 2025-12-30 11:17:53.924 [main debug] performing regular tasks 2025-12-30 11:17:53.924 [bus info] scan 15 cmd: 3115070400 2025-12-30 11:17:53.934 [bus debug] start request 31 2025-12-30 11:17:53.934 [bus debug] arbitration start with 31 2025-12-30 11:17:53.982 [bus debug] arbitration won 2025-12-30 11:17:53.982 [bus debug] arbitration delay 3 micros 2025-12-30 11:17:53.982 [bus info] arbitration delay 2 - 3 micros 2025-12-30 11:17:53.982 [bus debug] switching from ready to send command 2025-12-30 11:17:53.991 [bus debug] send/receive symbol latency 9 ms 2025-12-30 11:17:54.000 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:17:54.010 [bus debug] send/receive symbol latency 9 ms 2025-12-30 11:17:54.019 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:17:54.019 [bus debug] switching from send command to send command CRC 2025-12-30 11:17:54.028 [bus debug] send/receive symbol latency 9 ms 2025-12-30 11:17:54.028 [bus debug] switching from send command CRC to receive command ACK 2025-12-30 11:17:54.034 [bus debug] switching from receive command ACK to receive response 2025-12-30 11:17:54.083 [bus debug] switching from receive response to receive response CRC 2025-12-30 11:17:54.089 [bus debug] switching from receive response CRC to send response ACK 2025-12-30 11:17:54.099 [bus debug] send/receive symbol latency 9 ms 2025-12-30 11:17:54.099 [update info] sent MS cmd: 3115070400 / 0a5001180000000204ffff 2025-12-30 11:17:54.099 [bus notice] scan 15: ;Kromschroeder; ;0204;- 2025-12-30 11:17:54.099 [update notice] store 15 ident: done 2025-12-30 11:17:54.099 [update notice] sent scan-read scan.15 QQ=31: Kromschroeder; ;0204;- 2025-12-30 11:17:54.099 [bus debug] notify request: done 2025-12-30 11:17:54.099 [bus notice] scan 15: ;Kromschroeder; ;0204;- 2025-12-30 11:17:54.099 [bus debug] switching from send response ACK to send SYN 2025-12-30 11:17:54.099 [network debug] SSL state 0=before SSL initialization: type 0x10=start, val 1=? 2025-12-30 11:17:54.099 [network debug] SSL state 0=before SSL initialization: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.099 [network debug] SSL BIO state 2 res -1 2025-12-30 11:17:54.099 [network debug] SSL BIO state 3 res 1 2025-12-30 11:17:54.099 [network debug] SSL BIO state 4 res 10 2025-12-30 11:17:54.100 [network debug] SSL BIO state 6 res 0 2025-12-30 11:17:54.100 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:54.106 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:17:54.106 [bus debug] switching from send SYN to ready 2025-12-30 11:17:54.120 [network debug] SSL BIO state 5 res -1 2025-12-30 11:17:54.120 [network debug] SSL BIO state 5 res 1 2025-12-30 11:17:54.120 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.120 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:54.140 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.140 [network debug] SSL state 3=SSLv3/TLS read server hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.140 [network debug] SSL state 42=TLSv1.3 read encrypted extensions: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.141 [network debug] SSL state 4=SSLv3/TLS read server certificate: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.141 [network debug] SSL state 43=TLSv1.3 read server certificate verify: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.141 [network debug] SSL state 12=SSLv3/TLS read finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.141 [network debug] SSL state 18=SSLv3/TLS write change cipher spec: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.141 [network debug] SSL state 20=SSLv3/TLS write finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.141 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x20=done, val 1=? 2025-12-30 11:17:54.141 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:54.141 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.141 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.141 [network debug] SSL state 10=SSLv3/TLS read server session ticket: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:54.141 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:54.282 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x4008=write,alert, val 256=close notify 2025-12-30 11:17:54.282 [main error] unable to load scan config 15: no file from kromschroeder with prefix 15 found 2025-12-30 11:17:54.282 [main error] scan config 15: ERR: element not found 2025-12-30 11:17:54.900 [update info] received MM cmd: 1003050709bb0323030080ff78ff 2025-12-30 11:17:54.900 [update notice] received unknown MM cmd: 1003050709bb0323030080ff78ff 2025-12-30 11:17:55.192 [update info] received BC cmd: f1fe050308010100ff64ff3a00 2025-12-30 11:17:55.192 [update notice] received unknown BC cmd: f1fe050308010100ff64ff3a00 2025-12-30 11:17:55.928 [mqtt debug] publish ebusd/scan.15/ { "MF": {"value": "Kromschroeder"}, "ID": {"value": " "}, "SW": {"value": "0204"}, "HW": {"value": null}} 2025-12-30 11:17:55.928 [mqtt debug] publish ebusd/scan.15/ { "MF": {"value": "Kromschroeder"}, "ID": {"value": " "}, "SW": {"value": "0204"}, "HW": {"value": null}} 2025-12-30 11:17:56.283 [main debug] performing regular tasks 2025-12-30 11:17:56.283 [bus info] scan 51 cmd: 3151070400 2025-12-30 11:17:56.318 [bus debug] start request 31 2025-12-30 11:17:56.318 [bus debug] arbitration start with 31 2025-12-30 11:17:56.366 [bus debug] arbitration won 2025-12-30 11:17:56.366 [bus debug] arbitration delay 2 micros 2025-12-30 11:17:56.366 [bus debug] switching from ready to send command 2025-12-30 11:17:56.376 [bus debug] send/receive symbol latency 9 ms 2025-12-30 11:17:56.383 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:17:56.390 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:17:56.401 [bus debug] send/receive symbol latency 10 ms 2025-12-30 11:17:56.401 [bus debug] switching from send command to send command CRC 2025-12-30 11:17:56.409 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:17:56.409 [bus debug] switching from send command CRC to receive command ACK 2025-12-30 11:17:56.424 [bus debug] switching from receive command ACK to receive response 2025-12-30 11:17:56.469 [bus debug] switching from receive response to receive response CRC 2025-12-30 11:17:56.473 [bus debug] switching from receive response CRC to send response ACK 2025-12-30 11:17:56.482 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:17:56.482 [update info] sent MS cmd: 3151070400 / 0a5001140010000208ffff 2025-12-30 11:17:56.482 [bus notice] scan 51: ;Kromschroeder; ;0208;- 2025-12-30 11:17:56.482 [update notice] store 51 ident: done 2025-12-30 11:17:56.482 [update notice] sent scan-read scan.51 QQ=31: Kromschroeder; ;0208;- 2025-12-30 11:17:56.482 [bus debug] notify request: done 2025-12-30 11:17:56.482 [bus notice] scan 51: ;Kromschroeder; ;0208;- 2025-12-30 11:17:56.482 [bus debug] switching from send response ACK to send SYN 2025-12-30 11:17:56.482 [network debug] SSL state 0=before SSL initialization: type 0x10=start, val 1=? 2025-12-30 11:17:56.482 [network debug] SSL state 0=before SSL initialization: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.482 [network debug] SSL BIO state 2 res -1 2025-12-30 11:17:56.483 [network debug] SSL BIO state 3 res 1 2025-12-30 11:17:56.483 [network debug] SSL BIO state 4 res 10 2025-12-30 11:17:56.483 [network debug] SSL BIO state 6 res 0 2025-12-30 11:17:56.483 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:56.490 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:17:56.490 [bus debug] switching from send SYN to ready 2025-12-30 11:17:56.503 [network debug] SSL BIO state 5 res -1 2025-12-30 11:17:56.503 [network debug] SSL BIO state 5 res 1 2025-12-30 11:17:56.503 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.503 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:56.523 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.523 [network debug] SSL state 3=SSLv3/TLS read server hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.523 [network debug] SSL state 42=TLSv1.3 read encrypted extensions: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.524 [network debug] SSL state 4=SSLv3/TLS read server certificate: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.524 [network debug] SSL state 43=TLSv1.3 read server certificate verify: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.524 [network debug] SSL state 12=SSLv3/TLS read finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.524 [network debug] SSL state 18=SSLv3/TLS write change cipher spec: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.524 [network debug] SSL state 20=SSLv3/TLS write finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.524 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x20=done, val 1=? 2025-12-30 11:17:56.524 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:56.524 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.524 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.524 [network debug] SSL state 10=SSLv3/TLS read server session ticket: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:56.524 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:56.564 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x4008=write,alert, val 256=close notify 2025-12-30 11:17:56.564 [main error] unable to load scan config 51: no file from kromschroeder with prefix 51 found 2025-12-30 11:17:56.564 [main error] scan config 51: ERR: element not found 2025-12-30 11:17:57.932 [mqtt debug] publish ebusd/scan.51/ { "MF": {"value": "Kromschroeder"}, "ID": {"value": " "}, "SW": {"value": "0208"}, "HW": {"value": null}} 2025-12-30 11:17:57.932 [mqtt debug] publish ebusd/scan.51/ { "MF": {"value": "Kromschroeder"}, "ID": {"value": " "}, "SW": {"value": "0208"}, "HW": {"value": null}} 2025-12-30 11:17:58.565 [main debug] performing regular tasks 2025-12-30 11:17:58.565 [bus info] scan 75 cmd: 3175070400 2025-12-30 11:17:58.608 [bus debug] start request 31 2025-12-30 11:17:58.608 [bus debug] arbitration start with 31 2025-12-30 11:17:58.657 [bus debug] arbitration won 2025-12-30 11:17:58.657 [bus debug] arbitration delay 2 micros 2025-12-30 11:17:58.657 [bus debug] switching from ready to send command 2025-12-30 11:17:58.666 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:17:58.673 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:17:58.680 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:17:58.689 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:17:58.689 [bus debug] switching from send command to send command CRC 2025-12-30 11:17:58.698 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:17:58.698 [bus debug] switching from send command CRC to receive command ACK 2025-12-30 11:17:58.702 [bus debug] switching from receive command ACK to receive response 2025-12-30 11:17:58.752 [bus debug] switching from receive response to receive response CRC 2025-12-30 11:17:58.756 [bus debug] switching from receive response CRC to send response ACK 2025-12-30 11:17:58.766 [bus debug] send/receive symbol latency 9 ms 2025-12-30 11:17:58.766 [update info] sent MS cmd: 3175070400 / 0a5001180000000204ffff 2025-12-30 11:17:58.766 [bus notice] scan 75: ;Kromschroeder; ;0204;- 2025-12-30 11:17:58.766 [update notice] store 75 ident: done 2025-12-30 11:17:58.766 [update notice] sent scan-read scan.75 QQ=31: Kromschroeder; ;0204;- 2025-12-30 11:17:58.766 [bus debug] notify request: done 2025-12-30 11:17:58.766 [bus notice] scan 75: ;Kromschroeder; ;0204;- 2025-12-30 11:17:58.766 [bus debug] switching from send response ACK to send SYN 2025-12-30 11:17:58.766 [network debug] SSL state 0=before SSL initialization: type 0x10=start, val 1=? 2025-12-30 11:17:58.766 [network debug] SSL state 0=before SSL initialization: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.766 [network debug] SSL BIO state 2 res -1 2025-12-30 11:17:58.767 [network debug] SSL BIO state 3 res 1 2025-12-30 11:17:58.767 [network debug] SSL BIO state 4 res 10 2025-12-30 11:17:58.767 [network debug] SSL BIO state 6 res 0 2025-12-30 11:17:58.767 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:58.773 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:17:58.773 [bus debug] switching from send SYN to ready 2025-12-30 11:17:58.787 [network debug] SSL BIO state 5 res -1 2025-12-30 11:17:58.787 [network debug] SSL BIO state 5 res 1 2025-12-30 11:17:58.787 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.787 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:17:58.807 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.807 [network debug] SSL state 3=SSLv3/TLS read server hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.807 [network debug] SSL state 42=TLSv1.3 read encrypted extensions: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.808 [network debug] SSL state 4=SSLv3/TLS read server certificate: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.808 [network debug] SSL state 43=TLSv1.3 read server certificate verify: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.808 [network debug] SSL state 12=SSLv3/TLS read finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.808 [network debug] SSL state 18=SSLv3/TLS write change cipher spec: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.808 [network debug] SSL state 20=SSLv3/TLS write finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.808 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x20=done, val 1=? 2025-12-30 11:17:58.808 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:58.808 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.808 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.808 [network debug] SSL state 10=SSLv3/TLS read server session ticket: type 0x1001=loop,connect, val 1=? 2025-12-30 11:17:58.808 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:17:58.848 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x4008=write,alert, val 256=close notify 2025-12-30 11:17:58.849 [main error] unable to load scan config 75: no file from kromschroeder with prefix 75 found 2025-12-30 11:17:58.849 [main error] scan config 75: ERR: element not found 2025-12-30 11:17:59.836 [update info] received MM cmd: 1003080008333200008003003c 2025-12-30 11:17:59.836 [update notice] received unknown MM cmd: 1003080008333200008003003c 2025-12-30 11:17:59.935 [mqtt debug] publish ebusd/scan.75/ { "MF": {"value": "Kromschroeder"}, "ID": {"value": " "}, "SW": {"value": "0204"}, "HW": {"value": null}} 2025-12-30 11:17:59.935 [mqtt debug] publish ebusd/scan.75/ { "MF": {"value": "Kromschroeder"}, "ID": {"value": " "}, "SW": {"value": "0204"}, "HW": {"value": null}} 2025-12-30 11:18:00.130 [update info] received BC cmd: f1fe08000833324dfe0000003c 2025-12-30 11:18:00.130 [update notice] received update-read Broadcast RcTarget QQ=f1: 50.199;-1.699;0;0;0;60.000 2025-12-30 11:18:00.532 [update info] received MM cmd: 03f1080008003200008012003c 2025-12-30 11:18:00.532 [update notice] received unknown MM cmd: 03f1080008003200008012003c 2025-12-30 11:18:00.849 [main debug] performing regular tasks 2025-12-30 11:18:00.849 [bus info] scan f6 cmd: 31f6070400 2025-12-30 11:18:00.878 [bus debug] start request 31 2025-12-30 11:18:00.878 [bus debug] arbitration start with 31 2025-12-30 11:18:00.927 [bus debug] arbitration won 2025-12-30 11:18:00.927 [bus debug] arbitration delay 2 micros 2025-12-30 11:18:00.927 [bus debug] switching from ready to send command 2025-12-30 11:18:00.934 [bus debug] send/receive symbol latency 6 ms 2025-12-30 11:18:00.940 [bus debug] send/receive symbol latency 6 ms 2025-12-30 11:18:00.946 [bus debug] send/receive symbol latency 6 ms 2025-12-30 11:18:00.953 [bus debug] send/receive symbol latency 6 ms 2025-12-30 11:18:00.953 [bus debug] switching from send command to send command CRC 2025-12-30 11:18:00.959 [bus debug] send/receive symbol latency 6 ms 2025-12-30 11:18:00.959 [bus debug] switching from send command CRC to receive command ACK 2025-12-30 11:18:00.963 [bus debug] switching from receive command ACK to receive response 2025-12-30 11:18:01.014 [bus debug] switching from receive response to receive response CRC 2025-12-30 11:18:01.018 [bus debug] switching from receive response CRC to send response ACK 2025-12-30 11:18:01.025 [bus debug] send/receive symbol latency 6 ms 2025-12-30 11:18:01.025 [update info] sent MS cmd: 31f6070400 / 0a5001180000000204ffff 2025-12-30 11:18:01.025 [bus notice] scan f6: ;Kromschroeder; ;0204;- 2025-12-30 11:18:01.025 [update notice] store f6 ident: done 2025-12-30 11:18:01.025 [update notice] sent scan-read scan.f6 QQ=31: Kromschroeder; ;0204;- 2025-12-30 11:18:01.025 [bus debug] notify request: done 2025-12-30 11:18:01.025 [bus notice] scan f6: ;Kromschroeder; ;0204;- 2025-12-30 11:18:01.025 [bus debug] switching from send response ACK to send SYN 2025-12-30 11:18:01.025 [network debug] SSL state 0=before SSL initialization: type 0x10=start, val 1=? 2025-12-30 11:18:01.025 [network debug] SSL state 0=before SSL initialization: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.025 [network debug] SSL BIO state 2 res -1 2025-12-30 11:18:01.026 [network debug] SSL BIO state 3 res 1 2025-12-30 11:18:01.026 [network debug] SSL BIO state 4 res 10 2025-12-30 11:18:01.026 [network debug] SSL BIO state 6 res 0 2025-12-30 11:18:01.026 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:18:01.031 [bus debug] send/receive symbol latency 6 ms 2025-12-30 11:18:01.031 [bus debug] switching from send SYN to ready 2025-12-30 11:18:01.046 [network debug] SSL BIO state 5 res -1 2025-12-30 11:18:01.046 [network debug] SSL BIO state 5 res 1 2025-12-30 11:18:01.046 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.046 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:18:01.066 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.067 [network debug] SSL state 3=SSLv3/TLS read server hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.067 [network debug] SSL state 42=TLSv1.3 read encrypted extensions: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.068 [network debug] SSL state 4=SSLv3/TLS read server certificate: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.068 [network debug] SSL state 43=TLSv1.3 read server certificate verify: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.068 [network debug] SSL state 12=SSLv3/TLS read finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.068 [network debug] SSL state 18=SSLv3/TLS write change cipher spec: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.068 [network debug] SSL state 20=SSLv3/TLS write finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.068 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x20=done, val 1=? 2025-12-30 11:18:01.068 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:18:01.068 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.068 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.068 [network debug] SSL state 10=SSLv3/TLS read server session ticket: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:01.068 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:18:01.108 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x4008=write,alert, val 256=close notify 2025-12-30 11:18:01.108 [main error] unable to load scan config f6: no file from kromschroeder with prefix f6 found 2025-12-30 11:18:01.108 [main error] scan config f6: ERR: element not found 2025-12-30 11:18:01.821 [bus notice] new master 30, master count 6 2025-12-30 11:18:01.821 [update info] received BC cmd: 30fe070009008010171130120225 2025-12-30 11:18:01.821 [update notice] received update-read Broadcast Datetime QQ=30: -;11:17:10;30.12.2025 2025-12-30 11:18:01.938 [mqtt debug] publish ebusd/Broadcast/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": -1.699}, "forced": {"value": 0}, "hwc": {"value": 0}, "hc": {"value": 0}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:18:01.938 [mqtt debug] publish ebusd/Broadcast/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": -1.699}, "forced": {"value": 0}, "hwc": {"value": 0}, "hc": {"value": 0}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:18:02.914 [update info] received MS cmd: 7051501407033328001e0078 / 090001002d00d8145a00 2025-12-30 11:18:02.914 [update notice] received unknown MS cmd: 7051501407033328001e0078 / 090001002d00d8145a00 2025-12-30 11:18:02.939 [mqtt debug] publish ebusd/Broadcast/Datetime { "outsidetemp": {"value": null}, "time": {"value": "11:17:10"}, "date": {"value": "30.12.2025"}} 2025-12-30 11:18:02.939 [mqtt debug] publish ebusd/Broadcast/Datetime { "outsidetemp": {"value": null}, "time": {"value": "11:17:10"}, "date": {"value": "30.12.2025"}} 2025-12-30 11:18:02.939 [mqtt debug] publish ebusd/scan.f6/ { "MF": {"value": "Kromschroeder"}, "ID": {"value": " "}, "SW": {"value": "0204"}, "HW": {"value": null}} 2025-12-30 11:18:02.939 [mqtt debug] publish ebusd/scan.f6/ { "MF": {"value": "Kromschroeder"}, "ID": {"value": " "}, "SW": {"value": "0204"}, "HW": {"value": null}} 2025-12-30 11:18:03.109 [main debug] performing regular tasks 2025-12-30 11:18:03.109 [mqtt debug] publish ebusd/global/scan "finished" 2025-12-30 11:18:03.109 [mqtt debug] publish ebusd/global/scan "finished" 2025-12-30 11:18:03.109 [mqtt debug] publish ebusd/global/uptime 32 2025-12-30 11:18:03.109 [mqtt debug] publish ebusd/global/uptime 32 2025-12-30 11:18:04.792 [update info] received MM cmd: 1003050709bb0523030080ff78ff 2025-12-30 11:18:04.792 [update notice] received unknown MM cmd: 1003050709bb0523030080ff78ff 2025-12-30 11:18:05.083 [update info] received BC cmd: f1fe050308010100ff64ff3a00 2025-12-30 11:18:05.083 [update notice] received unknown BC cmd: f1fe050308010100ff64ff3a00 2025-12-30 11:18:09.814 [update info] received MM cmd: 1003080008333200008003003c 2025-12-30 11:18:09.814 [update notice] received unknown MM cmd: 1003080008333200008003003c 2025-12-30 11:18:10.105 [update info] received BC cmd: f1fe08000833324dfe0000003c 2025-12-30 11:18:10.105 [update notice] received update-read Broadcast RcTarget QQ=f1: 50.199;-1.699;0;0;0;60.000 2025-12-30 11:18:10.345 [update info] received BC cmd: 03fe050308010040005e273a00 2025-12-30 11:18:10.345 [update notice] received unknown BC cmd: 03fe050308010040005e273a00 2025-12-30 11:18:13.109 [main debug] performing regular tasks 2025-12-30 11:18:13.109 [network debug] SSL state 0=before SSL initialization: type 0x10=start, val 1=? 2025-12-30 11:18:13.109 [network debug] SSL state 0=before SSL initialization: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.109 [network debug] SSL BIO state 2 res -1 2025-12-30 11:18:13.110 [network debug] SSL BIO state 3 res 1 2025-12-30 11:18:13.110 [network debug] SSL BIO state 4 res 10 2025-12-30 11:18:13.110 [network debug] SSL BIO state 6 res 0 2025-12-30 11:18:13.110 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:18:13.130 [network debug] SSL BIO state 5 res -1 2025-12-30 11:18:13.130 [network debug] SSL BIO state 5 res 1 2025-12-30 11:18:13.130 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.130 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:18:13.150 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 3=SSLv3/TLS read server hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 42=TLSv1.3 read encrypted extensions: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 4=SSLv3/TLS read server certificate: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 43=TLSv1.3 read server certificate verify: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 12=SSLv3/TLS read finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 18=SSLv3/TLS write change cipher spec: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 20=SSLv3/TLS write finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x20=done, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 10=SSLv3/TLS read server session ticket: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.151 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:18:13.192 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x4008=write,alert, val 256=close notify 2025-12-30 11:18:13.192 [main debug] found 1 matching scan config files from kromschroeder with prefix 08: done 2025-12-30 11:18:13.192 [network debug] SSL state 0=before SSL initialization: type 0x10=start, val 1=? 2025-12-30 11:18:13.192 [network debug] SSL state 0=before SSL initialization: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.192 [network debug] SSL BIO state 2 res -1 2025-12-30 11:18:13.192 [network debug] SSL BIO state 3 res 1 2025-12-30 11:18:13.192 [network debug] SSL BIO state 4 res 10 2025-12-30 11:18:13.192 [network debug] SSL BIO state 6 res 0 2025-12-30 11:18:13.192 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:18:13.212 [network debug] SSL BIO state 5 res -1 2025-12-30 11:18:13.212 [network debug] SSL BIO state 5 res 1 2025-12-30 11:18:13.212 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.212 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:18:13.233 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.233 [network debug] SSL state 3=SSLv3/TLS read server hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.233 [network debug] SSL state 42=TLSv1.3 read encrypted extensions: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.233 [network debug] SSL state 4=SSLv3/TLS read server certificate: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.233 [network debug] SSL state 43=TLSv1.3 read server certificate verify: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.233 [network debug] SSL state 12=SSLv3/TLS read finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.233 [network debug] SSL state 18=SSLv3/TLS write change cipher spec: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.233 [network debug] SSL state 20=SSLv3/TLS write finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.233 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x20=done, val 1=? 2025-12-30 11:18:13.233 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:18:13.233 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.233 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.234 [network debug] SSL state 10=SSLv3/TLS read server session ticket: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.234 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:18:13.274 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x4008=write,alert, val 256=close notify 2025-12-30 11:18:13.274 [network debug] SSL state 0=before SSL initialization: type 0x10=start, val 1=? 2025-12-30 11:18:13.274 [network debug] SSL state 0=before SSL initialization: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.274 [network debug] SSL BIO state 2 res -1 2025-12-30 11:18:13.275 [network debug] SSL BIO state 3 res 1 2025-12-30 11:18:13.275 [network debug] SSL BIO state 4 res 10 2025-12-30 11:18:13.275 [network debug] SSL BIO state 6 res 0 2025-12-30 11:18:13.275 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:18:13.295 [network debug] SSL BIO state 5 res -1 2025-12-30 11:18:13.295 [network debug] SSL BIO state 5 res 1 2025-12-30 11:18:13.295 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.295 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:18:13.296 [update info] received MS cmd: 7051501407033328001e0078 / 090001332c00d8145a00 2025-12-30 11:18:13.296 [update notice] received unknown MS cmd: 7051501407033328001e0078 / 090001332c00d8145a00 2025-12-30 11:18:13.315 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.315 [network debug] SSL state 3=SSLv3/TLS read server hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.315 [network debug] SSL state 42=TLSv1.3 read encrypted extensions: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.316 [network debug] SSL state 4=SSLv3/TLS read server certificate: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.316 [network debug] SSL state 43=TLSv1.3 read server certificate verify: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.316 [network debug] SSL state 12=SSLv3/TLS read finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.316 [network debug] SSL state 18=SSLv3/TLS write change cipher spec: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.316 [network debug] SSL state 20=SSLv3/TLS write finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.316 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x20=done, val 1=? 2025-12-30 11:18:13.316 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:18:13.316 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.316 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.316 [network debug] SSL state 10=SSLv3/TLS read server session ticket: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:13.316 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:18:13.457 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x4008=write,alert, val 256=close notify 2025-12-30 11:18:13.458 [main notice] read scan config file kromschroeder/08..hc.csv for ID "3b", SW1048621, HW5130 2025-12-30 11:18:13.458 [main notice] found messages: 62 (0 conditional on 0 conditions, 0 poll, 10 update) 2025-12-30 11:18:13.458 [main info] scan config 08 message received 2025-12-30 11:18:13.458 [mqtt debug] publish ebusd/global/scan "running" 2025-12-30 11:18:13.458 [mqtt debug] publish ebusd/global/scan "running" 2025-12-30 11:18:13.458 [mqtt debug] publish ebusd/Broadcast/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": -1.699}, "forced": {"value": 0}, "hwc": {"value": 0}, "hc": {"value": 0}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:18:13.458 [mqtt debug] publish ebusd/Broadcast/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": -1.699}, "forced": {"value": 0}, "hwc": {"value": 0}, "hc": {"value": 0}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:18:15.224 [update info] received MM cmd: 1003050709bb0123030080ff78ff 2025-12-30 11:18:15.224 [update notice] received write hc Operation QQ=10: hwc_heat;pumpoff;50.19;-;-;60.0;- 2025-12-30 11:18:15.458 [main debug] performing regular tasks 2025-12-30 11:18:15.458 [bus info] scan 35 cmd: 3135070400 2025-12-30 11:18:15.517 [update info] received BC cmd: f1fe050308010100ff5eff3a00 2025-12-30 11:18:15.517 [update notice] received unknown BC cmd: f1fe050308010100ff5eff3a00 2025-12-30 11:18:15.517 [bus debug] start request 31 2025-12-30 11:18:15.517 [bus debug] arbitration start with 31 2025-12-30 11:18:15.566 [bus debug] arbitration won 2025-12-30 11:18:15.566 [bus debug] arbitration delay 3 micros 2025-12-30 11:18:15.566 [bus debug] switching from ready to send command 2025-12-30 11:18:15.574 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:18:15.583 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:18:15.590 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:18:15.599 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:18:15.599 [bus debug] switching from send command to send command CRC 2025-12-30 11:18:15.607 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:18:15.607 [bus debug] switching from send command CRC to receive command ACK 2025-12-30 11:18:15.614 [bus debug] switching from receive command ACK to receive response 2025-12-30 11:18:15.662 [bus debug] switching from receive response to receive response CRC 2025-12-30 11:18:15.666 [bus debug] switching from receive response CRC to send response ACK 2025-12-30 11:18:15.675 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:18:15.675 [update info] sent MS cmd: 3135070400 / 0a5001180000000204ffff 2025-12-30 11:18:15.675 [bus notice] scan 35: ;Kromschroeder; ;0204;- 2025-12-30 11:18:15.675 [update notice] store 35 ident: done 2025-12-30 11:18:15.675 [update notice] sent scan-read scan.35 QQ=31: Kromschroeder; ;0204;- 2025-12-30 11:18:15.675 [bus debug] notify request: done 2025-12-30 11:18:15.675 [bus notice] scan 35: ;Kromschroeder; ;0204;- 2025-12-30 11:18:15.675 [bus debug] switching from send response ACK to send SYN 2025-12-30 11:18:15.675 [network debug] SSL state 0=before SSL initialization: type 0x10=start, val 1=? 2025-12-30 11:18:15.675 [network debug] SSL state 0=before SSL initialization: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.675 [network debug] SSL BIO state 2 res -1 2025-12-30 11:18:15.676 [network debug] SSL BIO state 3 res 1 2025-12-30 11:18:15.676 [network debug] SSL BIO state 4 res 10 2025-12-30 11:18:15.676 [network debug] SSL BIO state 6 res 0 2025-12-30 11:18:15.676 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:18:15.684 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:18:15.684 [bus debug] switching from send SYN to ready 2025-12-30 11:18:15.696 [network debug] SSL BIO state 5 res -1 2025-12-30 11:18:15.696 [network debug] SSL BIO state 5 res 1 2025-12-30 11:18:15.696 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.696 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1002=exit,connect, val -1=? 2025-12-30 11:18:15.716 [network debug] SSL state 13=SSLv3/TLS write client hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.716 [network debug] SSL state 3=SSLv3/TLS read server hello: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.716 [network debug] SSL state 42=TLSv1.3 read encrypted extensions: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.717 [network debug] SSL state 4=SSLv3/TLS read server certificate: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.717 [network debug] SSL state 43=TLSv1.3 read server certificate verify: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.717 [network debug] SSL state 12=SSLv3/TLS read finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.717 [network debug] SSL state 18=SSLv3/TLS write change cipher spec: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.717 [network debug] SSL state 20=SSLv3/TLS write finished: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.717 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x20=done, val 1=? 2025-12-30 11:18:15.717 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:18:15.717 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.717 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.717 [network debug] SSL state 10=SSLv3/TLS read server session ticket: type 0x1001=loop,connect, val 1=? 2025-12-30 11:18:15.717 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x1002=exit,connect, val 1=? 2025-12-30 11:18:15.757 [network debug] SSL state 1=SSL negotiation finished successfully: type 0x4008=write,alert, val 256=close notify 2025-12-30 11:18:15.757 [main error] unable to load scan config 35: no file from kromschroeder with prefix 35 found 2025-12-30 11:18:15.757 [main error] scan config 35: ERR: element not found 2025-12-30 11:18:17.464 [mqtt debug] publish ebusd/scan.35/ { "MF": {"value": "Kromschroeder"}, "ID": {"value": " "}, "SW": {"value": "0204"}, "HW": {"value": null}} 2025-12-30 11:18:17.464 [mqtt debug] publish ebusd/scan.35/ { "MF": {"value": "Kromschroeder"}, "ID": {"value": " "}, "SW": {"value": "0204"}, "HW": {"value": null}} 2025-12-30 11:18:17.464 [mqtt debug] publish ebusd/hc/Operation { "status": {"value": "hwc_heat"}, "action": {"value": "pumpoff"}, "desiredtemp": {"value": 50.19}, "desiredpress": {"value": null}, "settingdegree": {"value": null}, "hwcdesiredtemp": {"value": 60.0}, "fuel": {"value": null}} 2025-12-30 11:18:17.464 [mqtt debug] publish ebusd/hc/Operation { "status": {"value": "hwc_heat"}, "action": {"value": "pumpoff"}, "desiredtemp": {"value": 50.19}, "desiredpress": {"value": null}, "settingdegree": {"value": null}, "hwcdesiredtemp": {"value": 60.0}, "fuel": {"value": null}} 2025-12-30 11:18:17.758 [main debug] performing regular tasks 2025-12-30 11:18:17.758 [mqtt debug] publish ebusd/global/scan "finished" 2025-12-30 11:18:17.758 [mqtt debug] publish ebusd/global/scan "finished" 2025-12-30 11:18:19.367 [mqtt debug] publish ebusd/global/uptime 48 2025-12-30 11:18:19.367 [mqtt debug] publish ebusd/global/uptime 48 2025-12-30 11:18:19.367 [mqtt debug] publish homeassistant/sensor/ebusd_hc_Flowtemp_value/config { "unique_id":"ebusd_hc_Flowtemp_value", "name":"Flowtemp ", "device":{ "identifiers":"ebusd_hc", "manufacturer":"ebusd.eu", "name":"ebusd hc", "via_device":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "value_template":"{{value_json[\"value\"].value}}", "state_topic":"ebusd/hc/Flowtemp", "unit_of_measurement":"°C", "state_class":"measurement", "device_class":"temperature" } 2025-12-30 11:18:19.367 [mqtt debug] publish homeassistant/sensor/ebusd_hc_Flowtemp_value/config { "unique_id":"ebusd_hc_Flowtemp_value", "name":"Flowtemp ", "device":{ "identifiers":"ebusd_hc", "manufacturer":"ebusd.eu", "name":"ebusd hc", "via_device":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "value_template":"{{value_json[\"value\"].value}}", "state_topic":"ebusd/hc/Flowtemp", "unit_of_measurement":"°C", "state_class":"measurement", "device_class":"temperature" } 2025-12-30 11:18:19.368 [mqtt debug] publish homeassistant/sensor/ebusd_hc_Flowtempdesired_value/config { "unique_id":"ebusd_hc_Flowtempdesired_value", "name":"Flowtempdesired ", "device":{ "identifiers":"ebusd_hc", "manufacturer":"ebusd.eu", "name":"ebusd hc", "via_device":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "value_template":"{{value_json[\"value\"].value}}", "state_topic":"ebusd/hc/Flowtempdesired", "unit_of_measurement":"°C", "state_class":"measurement", "device_class":"temperature" } 2025-12-30 11:18:19.368 [mqtt debug] publish homeassistant/sensor/ebusd_hc_Flowtempdesired_value/config { "unique_id":"ebusd_hc_Flowtempdesired_value", "name":"Flowtempdesired ", "device":{ "identifiers":"ebusd_hc", "manufacturer":"ebusd.eu", "name":"ebusd hc", "via_device":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "value_template":"{{value_json[\"value\"].value}}", "state_topic":"ebusd/hc/Flowtempdesired", "unit_of_measurement":"°C", "state_class":"measurement", "device_class":"temperature" } 2025-12-30 11:18:19.368 [mqtt debug] publish homeassistant/sensor/ebusd_hc_Hwctemp_value/config { "unique_id":"ebusd_hc_Hwctemp_value", "name":"Hwctemp ", "device":{ "identifiers":"ebusd_hc", "manufacturer":"ebusd.eu", "name":"ebusd hc", "via_device":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "value_template":"{{value_json[\"value\"].value}}", "state_topic":"ebusd/hc/Hwctemp", "unit_of_measurement":"°C", "state_class":"measurement", "device_class":"temperature" } 2025-12-30 11:18:19.368 [mqtt debug] publish homeassistant/sensor/ebusd_hc_Hwctemp_value/config { "unique_id":"ebusd_hc_Hwctemp_value", "name":"Hwctemp ", "device":{ "identifiers":"ebusd_hc", "manufacturer":"ebusd.eu", "name":"ebusd hc", "via_device":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "value_template":"{{value_json[\"value\"].value}}", "state_topic":"ebusd/hc/Hwctemp", "unit_of_measurement":"°C", "state_class":"measurement", "device_class":"temperature" } 2025-12-30 11:18:19.368 [mqtt debug] publish homeassistant/sensor/ebusd_hc_Hwctempdesired_value/config { "unique_id":"ebusd_hc_Hwctempdesired_value", "name":"Hwctempdesired ", "device":{ "identifiers":"ebusd_hc", "manufacturer":"ebusd.eu", "name":"ebusd hc", "via_device":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "value_template":"{{value_json[\"value\"].value}}", "state_topic":"ebusd/hc/Hwctempdesired", "unit_of_measurement":"°C", "state_class":"measurement", "device_class":"temperature" } 2025-12-30 11:18:19.368 [mqtt debug] publish homeassistant/sensor/ebusd_hc_Hwctempdesired_value/config { "unique_id":"ebusd_hc_Hwctempdesired_value", "name":"Hwctempdesired ", "device":{ "identifiers":"ebusd_hc", "manufacturer":"ebusd.eu", "name":"ebusd hc", "via_device":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "value_template":"{{value_json[\"value\"].value}}", "state_topic":"ebusd/hc/Hwctempdesired", "unit_of_measurement":"°C", "state_class":"measurement", "device_class":"temperature" } 2025-12-30 11:18:19.368 [mqtt debug] publish homeassistant/sensor/ebusd_hc_Returntemp_value/config { "unique_id":"ebusd_hc_Returntemp_value", "name":"Returntemp ", "device":{ "identifiers":"ebusd_hc", "manufacturer":"ebusd.eu", "name":"ebusd hc", "via_device":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "value_template":"{{value_json[\"value\"].value}}", "state_topic":"ebusd/hc/Returntemp", "unit_of_measurement":"°C", "state_class":"measurement", "device_class":"temperature" } 2025-12-30 11:18:19.368 [mqtt debug] publish homeassistant/sensor/ebusd_hc_Returntemp_value/config { "unique_id":"ebusd_hc_Returntemp_value", "name":"Returntemp ", "device":{ "identifiers":"ebusd_hc", "manufacturer":"ebusd.eu", "name":"ebusd hc", "via_device":"ebusd", "sw_version":"25.1", "suggested_area":"Heating" }, "value_template":"{{value_json[\"value\"].value}}", "state_topic":"ebusd/hc/Returntemp", "unit_of_measurement":"°C", "state_class":"measurement", "device_class":"temperature" } 2025-12-30 11:18:19.375 [bus info] poll cmd: 3108502203000d00 2025-12-30 11:18:19.375 [bus debug] start request 31 2025-12-30 11:18:19.375 [bus debug] arbitration start with 31 2025-12-30 11:18:19.425 [bus debug] arbitration won 2025-12-30 11:18:19.425 [bus debug] arbitration delay 3 micros 2025-12-30 11:18:19.425 [bus debug] switching from ready to send command 2025-12-30 11:18:19.434 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:18:19.441 [bus debug] send/receive symbol latency 6 ms 2025-12-30 11:18:19.449 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:18:19.458 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:18:19.465 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:18:19.473 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:18:19.482 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:18:19.482 [bus debug] switching from send command to send command CRC 2025-12-30 11:18:19.491 [bus debug] send/receive symbol latency 9 ms 2025-12-30 11:18:19.491 [bus debug] switching from send command CRC to receive command ACK 2025-12-30 11:18:19.497 [bus debug] switching from receive command ACK to receive response 2025-12-30 11:18:19.542 [bus debug] notify request: ERR: SYN received 2025-12-30 11:18:19.542 [bus error] poll hc Flowtemp failed: ERR: read timeout 2025-12-30 11:18:19.542 [bus debug] ERR: SYN received during receive response, switching to ready 2025-12-30 11:18:20.199 [update info] received MM cmd: 1003080008333200008003003c 2025-12-30 11:18:20.199 [update notice] received write hc RcTarget QQ=10: 50.199;0.000;-;1;1;60.000 2025-12-30 11:18:20.493 [update info] received BC cmd: f1fe08000833324dfe0000003c 2025-12-30 11:18:20.493 [update notice] received update-read Broadcast RcTarget QQ=f1: 50.199;-1.699;0;0;0;60.000 2025-12-30 11:18:23.252 [update info] received MS cmd: 7051501407033328001e0078 / 090001662b00d8145a00 2025-12-30 11:18:23.252 [update notice] received unknown MS cmd: 7051501407033328001e0078 / 090001662b00d8145a00 2025-12-30 11:18:23.372 [mqtt debug] publish ebusd/Broadcast/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": -1.699}, "forced": {"value": 0}, "hwc": {"value": 0}, "hc": {"value": 0}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:18:23.372 [mqtt debug] publish ebusd/Broadcast/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": -1.699}, "forced": {"value": 0}, "hwc": {"value": 0}, "hc": {"value": 0}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:18:23.372 [mqtt debug] publish ebusd/hc/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": 0.000}, "forced": {"value": null}, "hwc": {"value": 1}, "hc": {"value": 1}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:18:23.372 [mqtt debug] publish ebusd/hc/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": 0.000}, "forced": {"value": null}, "hwc": {"value": 1}, "hc": {"value": 1}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:18:25.015 [bus info] poll cmd: 3108502203000200 2025-12-30 11:18:25.016 [bus debug] start request 31 2025-12-30 11:18:25.016 [bus debug] arbitration start with 31 2025-12-30 11:18:25.064 [bus debug] arbitration lost 2025-12-30 11:18:25.064 [bus debug] ERR: arbitration lost during ready, retry 2025-12-30 11:18:25.162 [bus debug] start request 31 2025-12-30 11:18:25.162 [bus debug] arbitration start with 31 2025-12-30 11:18:25.203 [bus debug] arbitration won 2025-12-30 11:18:25.203 [bus debug] arbitration delay 3 micros 2025-12-30 11:18:25.203 [bus debug] switching from ready to send command 2025-12-30 11:18:25.211 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:18:25.220 [bus debug] send/receive symbol latency 9 ms 2025-12-30 11:18:25.230 [bus debug] send/receive symbol latency 9 ms 2025-12-30 11:18:25.237 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:18:25.251 [bus debug] send/receive symbol latency 13 ms 2025-12-30 11:18:25.259 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:18:25.268 [bus debug] send/receive symbol latency 8 ms 2025-12-30 11:18:25.268 [bus debug] switching from send command to send command CRC 2025-12-30 11:18:25.275 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:18:25.275 [bus debug] switching from send command CRC to receive command ACK 2025-12-30 11:18:25.280 [bus debug] switching from receive command ACK to receive response 2025-12-30 11:18:25.328 [bus debug] notify request: ERR: SYN received 2025-12-30 11:18:25.328 [bus error] poll hc Flowtempdesired failed: ERR: read timeout 2025-12-30 11:18:25.328 [bus debug] ERR: SYN received during receive response, switching to ready 2025-12-30 11:18:25.399 [update info] received MM cmd: 1003050709bb0323030080ff78ff 2025-12-30 11:18:25.399 [update notice] received write hc Operation QQ=10: hwc_heat;consumeoff;50.19;-;-;60.0;- 2025-12-30 11:18:25.692 [update info] received BC cmd: f1fe050308010100ff5eff3a00 2025-12-30 11:18:25.692 [update notice] received unknown BC cmd: f1fe050308010100ff5eff3a00 2025-12-30 11:18:27.758 [main debug] performing regular tasks 2025-12-30 11:18:28.375 [mqtt debug] publish ebusd/hc/Operation { "status": {"value": "hwc_heat"}, "action": {"value": "consumeoff"}, "desiredtemp": {"value": 50.19}, "desiredpress": {"value": null}, "settingdegree": {"value": null}, "hwcdesiredtemp": {"value": 60.0}, "fuel": {"value": null}} 2025-12-30 11:18:28.375 [mqtt debug] publish ebusd/hc/Operation { "status": {"value": "hwc_heat"}, "action": {"value": "consumeoff"}, "desiredtemp": {"value": 50.19}, "desiredpress": {"value": null}, "settingdegree": {"value": null}, "hwcdesiredtemp": {"value": 60.0}, "fuel": {"value": null}} 2025-12-30 11:18:30.086 [update info] received MM cmd: 1003080008333200008003003c 2025-12-30 11:18:30.086 [update notice] received write hc RcTarget QQ=10: 50.199;0.000;-;1;1;60.000 2025-12-30 11:18:30.378 [update info] received BC cmd: f1fe08000833324dfe0000003c 2025-12-30 11:18:30.378 [update notice] received update-read Broadcast RcTarget QQ=f1: 50.199;-1.699;0;0;0;60.000 2025-12-30 11:18:31.007 [bus info] poll cmd: 3108502203000e00 2025-12-30 11:18:31.007 [bus debug] start request 31 2025-12-30 11:18:31.007 [bus debug] arbitration start with 31 2025-12-30 11:18:31.056 [bus debug] arbitration won 2025-12-30 11:18:31.056 [bus debug] arbitration delay 3 micros 2025-12-30 11:18:31.056 [bus debug] switching from ready to send command 2025-12-30 11:18:31.062 [bus debug] send/receive symbol latency 5 ms 2025-12-30 11:18:31.062 [bus info] send/receive symbol latency 5 - 14 ms 2025-12-30 11:18:31.068 [bus debug] send/receive symbol latency 5 ms 2025-12-30 11:18:31.074 [bus debug] send/receive symbol latency 5 ms 2025-12-30 11:18:31.079 [bus debug] send/receive symbol latency 5 ms 2025-12-30 11:18:31.085 [bus debug] send/receive symbol latency 5 ms 2025-12-30 11:18:31.092 [bus debug] send/receive symbol latency 7 ms 2025-12-30 11:18:31.098 [bus debug] send/receive symbol latency 5 ms 2025-12-30 11:18:31.098 [bus debug] switching from send command to send command CRC 2025-12-30 11:18:31.104 [bus debug] send/receive symbol latency 5 ms 2025-12-30 11:18:31.104 [bus debug] switching from send command CRC to receive command ACK 2025-12-30 11:18:31.110 [bus debug] switching from receive command ACK to receive response 2025-12-30 11:18:31.155 [bus debug] notify request: ERR: SYN received 2025-12-30 11:18:31.155 [bus error] poll hc Hwctemp failed: ERR: read timeout 2025-12-30 11:18:31.155 [bus debug] ERR: SYN received during receive response, switching to ready 2025-12-30 11:18:31.844 [bus debug] ERR: read timeout during receive command, switching to skip 2025-12-30 11:18:33.186 [update info] received MS cmd: 7051501407033328001e0078 / 090001662a00d8145a00 2025-12-30 11:18:33.186 [update notice] received unknown MS cmd: 7051501407033328001e0078 / 090001662a00d8145a00 2025-12-30 11:18:33.380 [mqtt debug] publish ebusd/Broadcast/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": -1.699}, "forced": {"value": 0}, "hwc": {"value": 0}, "hc": {"value": 0}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:18:33.380 [mqtt debug] publish ebusd/Broadcast/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": -1.699}, "forced": {"value": 0}, "hwc": {"value": 0}, "hc": {"value": 0}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:18:33.380 [mqtt debug] publish ebusd/hc/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": 0.000}, "forced": {"value": null}, "hwc": {"value": 1}, "hc": {"value": 1}, "hwcdesiredtemp": {"value": 60.000}} 2025-12-30 11:18:33.380 [mqtt debug] publish ebusd/hc/RcTarget { "desiredtemp": {"value": 50.199}, "outsidetemp": {"value": 0.000}, "forced": {"value": null}, "hwc": {"value": 1}, "hc": {"value": 1}, "hwcdesiredtemp": {"value": 60.000}} ```The only data, which is sent via MQTT is this:
Topic: ebusd/hc/Operation:
Topic: ebusd/hc/RcTarget:
i also tried micro-ebusd
micor-ebusd did not read any sensor. If i can get it running via micro-ebusd i am happy to pay for it! =)
Logfile after Shield boot
Beta Was this translation helpful? Give feedback.
All reactions