Merge tag 'pull-riscv-to-apply-20250704' of https://github.com/alistair23/qemu into staging

Second RISC-V PR for 10.1

* sstc extension fixes
* Fix zama16b order in isa_edata_arr
* Profile handling fixes
* Extend PMP region up to 64
* Remove capital 'Z' CPU properties
* Add missing named features
* Support atomic instruction fetch (Ziccif)
* Add max_satp_mode from host cpu
* Extend and configure PMP region count
* Fix PPN field of Translation-reponse register
* Use qemu_chr_fe_write_all() in DBCN_CONSOLE_WRITE_BYTE
* Fix fcvt.s.bf16 NaN box checking
* Avoid infinite delay of async xmit function
* Device tree reg cleanups
* Add Kunminghu CPU and platform
* Fix missing exit TB flow for ldff_trans
* Fix migration failure when aia is configured as aplic-imsic
* Fix MEPC/SEPC bit masking for IALIGN
* Add a property to set vill bit on reserved usage of vsetvli instruction
* Add Svrsw60t59b extension support

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmhntt4ACgkQr3yVEwxT
# gBMaCQ/9E+LeRY59nz3K3XXUw6XLBfaDECXbKzIn0GM1yXeWTX4dB2h2hoGWdu3R
# CRPxWHECN7CeJhd2J23eLfOi+fTUeppJBeR7TcGyoXVC+y0knZv/clQ3OvMFYcgV
# xjzzu1yipQlXwY+kmDZ6qL5up/Q+faw7tRaePZaJheRGYpVRnjoKUZq5fe4Ug4RU
# Xg6Di86eYyk+Jo0g2exvtzy1rX2eBp7Hz200wWiH5Z1B+3NzgMUHrHuJfNAz8zAt
# n8uvruvaLGGtWcQJauRXlAELR6k9tmkfq1Mbqf3FK6muaQCtFD7PXXnjL/rU/z20
# hhxj0psOhBJLd0W5wQ3vLnDf6Wve9zmUdTR9kI0Kt3xUUdfeBuzKcU06F/G8wEsZ
# 2sIYQqt0mxoJboY2lpje7TO4H9gvAf76WBOV10FV2gWsqWu2rZQ6herdq3YZYkHX
# purUTgyjHn4jl2Y3Kzj0Gq1SHo0yaA/sD6xNR8X+JqljSruDxtOFU7wkKBbewoIg
# OSfwemjRUVsPQZ958042ntwJt81v1604Oky8JSFr5eCFx/aoLJ1vDYh7BKZAogNH
# uB/YigGq9+/MVzqJpZI+kZkd+1nzaizeL0FUPRTq0jFA2u+vc3J3svQ/jNXDH2c+
# 5nGuhbkvT0ptmVMBqFV2vjPh6+ScR8t03wHdQ4PmDoXC3o9zbbU=
# =CfRy
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 04 Jul 2025 07:11:26 EDT
# gpg:                using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65  9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20250704' of https://github.com/alistair23/qemu: (40 commits)
  target: riscv: Add Svrsw60t59b extension support
  target/riscv: Add a property to set vill bit on reserved usage of vsetvli instruction
  tests/tcg/riscv64: Add test for MEPC bit masking
  target/riscv: Fix MEPC/SEPC bit masking for IALIGN
  migration: Fix migration failure when aia is configured as aplic-imsic
  target/riscv: rvv: Fix missing exit TB flow for ldff_trans
  hw/riscv: Initial support for BOSC's Xiangshan Kunminghu FPGA prototype
  target/riscv: Add BOSC's Xiangshan Kunminghu CPU
  hw/riscv/virt: Use setprop_sized_cells for pcie
  hw/riscv/virt: Use setprop_sized_cells for iommu
  hw/riscv/virt: Use setprop_sized_cells for rtc
  hw/riscv/virt: Use setprop_sized_cells for uart
  hw/riscv/virt: Use setprop_sized_cells for reset
  hw/riscv/virt: Use setprop_sized_cells for virtio
  hw/riscv/virt: Use setprop_sized_cells for plic
  hw/riscv/virt: Use setprop_sized_cells for aclint
  hw/riscv/virt: Use setprop_sized_cells for aplic
  hw/riscv/virt: Use setprop_sized_cells for memory
  hw/riscv/virt: Use setprop_sized_cells for clint
  hw/riscv/virt: Fix clint base address type
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

Author: stefanhaRH

MAINTAINERS

@@ -1701,6 +1701,13 @@ S: Maintained
 F: hw/riscv/microblaze-v-generic.c
 F: docs/system/riscv/microblaze-v-generic.rst
 
+Xiangshan Kunminghu
+M: Ran Wang <wangran@bosc.ac.cn>
+S: Maintained
+F: docs/system/riscv/xiangshan-kunminghu.rst
+F: hw/riscv/xiangshan_kmh.c
+F: include/hw/riscv/xiangshan_kmh.h
+
 RX Machines
 -----------
 rx-gdbsim

configs/devices/riscv64-softmmu/default.mak

@@ -11,3 +11,4 @@
 # CONFIG_RISCV_VIRT=n
 # CONFIG_MICROCHIP_PFSOC=n
 # CONFIG_SHAKTI_C=n
+# CONFIG_XIANGSHAN_KUNMINGHU=n

docs/system/riscv/xiangshan-kunminghu.rst

@@ -0,0 +1,39 @@
+BOSC Xiangshan Kunminghu FPGA prototype platform (``xiangshan-kunminghu``)
+==========================================================================
+The ``xiangshan-kunminghu`` machine is compatible with our FPGA prototype
+platform.
+
+XiangShan is an open-source high-performance RISC-V processor project.
+The third generation processor is called Kunminghu. Kunminghu is a 64-bit
+RV64GCBSUHV processor core. More information can be found in our Github
+repository:
+https://github.com/OpenXiangShan/XiangShan
+
+Supported devices
+-----------------
+The ``xiangshan-kunminghu`` machine supports the following devices:
+
+* Up to 16 xiangshan-kunminghu cores
+* Core Local Interruptor (CLINT)
+* Incoming MSI Controller (IMSIC)
+* Advanced Platform-Level Interrupt Controller (APLIC)
+* 1 UART
+
+Boot options
+------------
+The ``xiangshan-kunminghu`` machine can start using the standard ``-bios``
+functionality for loading the boot image. You need to compile and link
+the firmware, kernel, and Device Tree (FDT) into a single binary file,
+such as ``fw_payload.bin``.
+
+Running
+-------
+Below is an example command line for running the ``xiangshan-kunminghu``
+machine:
+
+.. code-block:: bash
+
+   $ qemu-system-riscv64 -machine xiangshan-kunminghu \
+      -smp 16 -m 16G \
+      -bios path/to/opensbi/platform/generic/firmware/fw_payload.bin \
+      -nographic

docs/system/target-riscv.rst

@@ -71,6 +71,7 @@ undocumented; you can get a complete list by running
    riscv/shakti-c
    riscv/sifive_u
    riscv/virt
+   riscv/xiangshan-kunminghu
 
 RISC-V CPU firmware
 -------------------

hw/char/sifive_uart.c

@@ -128,8 +128,10 @@ static void sifive_uart_write_tx_fifo(SiFiveUARTState *s, const uint8_t *buf,
         s->txfifo |= SIFIVE_UART_TXFIFO_FULL;
     }
 
-    timer_mod(s->fifo_trigger_handle, current_time +
-                  TX_INTERRUPT_TRIGGER_DELAY_NS);
+    if (!timer_pending(s->fifo_trigger_handle)) {
+        timer_mod(s->fifo_trigger_handle, current_time +
+                      TX_INTERRUPT_TRIGGER_DELAY_NS);
+    }
 }
 
 static uint64_t

hw/intc/riscv_aclint.c

@@ -28,6 +28,7 @@
 #include "qemu/module.h"
 #include "hw/sysbus.h"
 #include "target/riscv/cpu.h"
+#include "target/riscv/time_helper.h"
 #include "hw/qdev-properties.h"
 #include "hw/intc/riscv_aclint.h"
 #include "qemu/timer.h"
@@ -240,6 +241,10 @@ static void riscv_aclint_mtimer_write(void *opaque, hwaddr addr,
             riscv_aclint_mtimer_write_timecmp(mtimer, RISCV_CPU(cpu),
                                               mtimer->hartid_base + i,
                                               mtimer->timecmp[i]);
+            riscv_timer_write_timecmp(env, env->stimer, env->stimecmp, 0, MIP_STIP);
+            riscv_timer_write_timecmp(env, env->vstimer, env->vstimecmp,
+                                      env->htimedelta, MIP_VSTIP);
+
         }
         return;
     }

hw/intc/riscv_aplic.c

@@ -962,10 +962,18 @@ static const Property riscv_aplic_properties[] = {
     DEFINE_PROP_BOOL("mmode", RISCVAPLICState, mmode, 0),
 };
 
+static bool riscv_aplic_state_needed(void *opaque)
+{
+    RISCVAPLICState *aplic = opaque;
+
+    return riscv_use_emulated_aplic(aplic->msimode);
+}
+
 static const VMStateDescription vmstate_riscv_aplic = {
     .name = "riscv_aplic",
-    .version_id = 2,
-    .minimum_version_id = 2,
+    .version_id = 3,
+    .minimum_version_id = 3,
+    .needed = riscv_aplic_state_needed,
     .fields = (const VMStateField[]) {
             VMSTATE_UINT32(domaincfg, RISCVAPLICState),
             VMSTATE_UINT32(mmsicfgaddr, RISCVAPLICState),

hw/intc/riscv_imsic.c

@@ -398,10 +398,16 @@ static const Property riscv_imsic_properties[] = {
     DEFINE_PROP_UINT32("num-irqs", RISCVIMSICState, num_irqs, 0),
 };
 
+static bool riscv_imsic_state_needed(void *opaque)
+{
+    return !kvm_irqchip_in_kernel();
+}
+
 static const VMStateDescription vmstate_riscv_imsic = {
     .name = "riscv_imsic",
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
+    .needed = riscv_imsic_state_needed,
     .fields = (const VMStateField[]) {
             VMSTATE_VARRAY_UINT32(eidelivery, RISCVIMSICState,
                                   num_pages, 0,

hw/riscv/Kconfig

@@ -119,3 +119,12 @@ config SPIKE
     select HTIF
     select RISCV_ACLINT
     select SIFIVE_PLIC
+
+config XIANGSHAN_KUNMINGHU
+    bool
+    default y
+    depends on RISCV64
+    select RISCV_ACLINT
+    select RISCV_APLIC
+    select RISCV_IMSIC
+    select SERIAL_MM

hw/riscv/meson.build

@@ -13,5 +13,6 @@ riscv_ss.add(when: 'CONFIG_ACPI', if_true: files('virt-acpi-build.c'))
 riscv_ss.add(when: 'CONFIG_RISCV_IOMMU', if_true: files(
 	'riscv-iommu.c', 'riscv-iommu-pci.c', 'riscv-iommu-sys.c', 'riscv-iommu-hpm.c'))
 riscv_ss.add(when: 'CONFIG_MICROBLAZE_V', if_true: files('microblaze-v-generic.c'))
+riscv_ss.add(when: 'CONFIG_XIANGSHAN_KUNMINGHU', if_true: files('xiangshan_kmh.c'))
 
 hw_arch += {'riscv': riscv_ss}