*** *** ************* *** **** ************* ******* **** **** **** **** *************
*** *** *************** *** **** *************** ****** **** **** **** **** *************
*** *** ****** *** **** ****** ****** **** **** **** **** **** ****
*** *** ***** *** **** ***** ****** **** **** **** **** **** ****
*** *** *************** *********** *************** ****** **** ******** **** **** ****
****** *********** ********** *********** ****** **** ******* **** **** ****
An unique User Interface (UI) that will take RTL netlist & SDC constraints as an input, and will generate
sythnesized netlist & pre-layout timing report as an output. It uses Yosys open-source tool for synthesis
and Opentimer to generate pre-layout timing reports.
Developed and Maintained by VLSI System Design Corporation Pvt. Ltd.
For any queries and bugs, please drop a mail to kunalpghosh@gmail.com
********* A vlsisystemdesign.com initiative *********
-------------- Below settings will ensure the correct behavior of vsdsynth -------------------
-----Please review below settings with VSD team or drop an email to kunalpghosh@gmail.com-----
Set your technology using variable "tech_name"
Setting technology to osu018
This is the place where all procs are located
Setting variable 'proc_dir' to procs
tcl_precision specifies the number of digits to generate when converting floating point values to strings
Setting variable 'tcl_precision' to 3
Set run_synthesis variable to '1' if you want to run synthesis. If you want to use the.prelayout.timing.rpt of previous runs. which is stored in outdir_, set this variable to '0' to skip synthesis and jump to STA
Setting variable 'run_synthesis' to 1
Set generate_sdc to '1' if you want to generate SDC from data given in excel sheet. If you already have sdc, save it in outdir_ as .sdc and set this variable to '0'
Setting variable 'generate_sdc' to 1
Set enable_prelayout_timing to '1' for running STA with zero-wire load parasitics. If you have generated spef, set this variable to '0'
Setting variable 'enable_prelayout_timing' to 1
Set do_STA to '1' if you want to run STA after synthesis. Else, set this variable to '0'
Setting variable 'do_STA' to 1
Set generate_report to '1' if you want to generate QOR of your design. Else, set this variable to '0'
Setting variable 'generate_report' to 0
If generate_report is '1', there are currently 2 kinds of reporting format we provide. If you need horizontal reporting, set generate_horizontal_report to '1'
Setting variable 'generate_horizontal_report' to 1
If generate_report is '1', there are currently 2 kinds of reporting format we provide. If you need vertical reporting, set generate_horizontal_report to '1'
Setting variable 'generate_vertical_report' to 1
If run_place_and_route is '1', it will run placement and routing
Setting variable 'run_place_and_route' to 1
Info: Setting Design Name as 'spi_slave'
Info: Setting Output Directory as 'outdir_spi_slave'
Info: Setting Netlist Directory as 'verilog'
Info: Setting Early Library Path as '/usr/local/share/qflow/tech/osu018/osu018_stdcells.lib'
Info: Setting Late Library Path as '/usr/local/share/qflow/tech/osu018/osu018_stdcells.lib'
Info: Setting Constraints File as 'spi_slave_design_constraints.csv'
Info: Below are the list of initial variables and their values. User can use these variables for further debug. Use 'puts ' command to query value of below variables
DesignName = spi_slave
OutputDirectory = /home/rakesh/vsd/vsdflow/outdir_spi_slave
NetlistDirectory = /home/rakesh/vsd/vsdflow/verilog
EarlyLibraryPath = /usr/local/share/qflow/tech/osu018/osu018_stdcells.lib
LateLibraryPath = /usr/local/share/qflow/tech/osu018/osu018_stdcells.lib
ConstraintsFile = /home/rakesh/vsd/vsdflow/spi_slave_design_constraints.csv
Info: Early cell library found in path /usr/local/share/qflow/tech/osu018/osu018_stdcells.lib
Info: Late cell library found in path /usr/local/share/qflow/tech/osu018/osu018_stdcells.lib
Info: Output directory found in path /home/rakesh/vsd/vsdflow/outdir_spi_slave
Info: RTL netlist directory found in path /home/rakesh/vsd/vsdflow/verilog
Info: Constraints file found in path /home/rakesh/vsd/vsdflow/spi_slave_design_constraints.csv
Info: Dumping SDC constraints for spi_slave
Info-SDC: Working on clock constraints.....
Info-SDC: Working on IO constraints.....
Info-SDC: Categorizing input ports as bits and bussed
Info-SDC: Working on IO constraints.....
Info-SDC: Categorizing output ports as bits and bussed
Info: SDC created. Please use constraints in path /home/rakesh/vsd/vsdflow/outdir_spi_slave/spi_slave.sdc
Starting synthesis using qflow
Synthesis finished without errors
Please review log file "/home/rakesh/vsd/vsdflow/outdir_spi_slave/log/synth.log" for errors/warnings
Info: Please find the synthesized netlist for spi_slave at below path. You can use this netlist for STA or PNR
/home/rakesh/vsd/vsdflow/outdir_spi_slave/synthesis/spi_slave_synth.rtlbb.v
Info: Pre-layout STA started
Info: Timing Analysis Started....
Info: Initializing number of threads, libraries, sdc, verilog netlist path...
Info: enable_prelayout_timing is 1. Enabling zero-wire load parasitics
Info: Timing Analysis Started....
Info: Initializing number of threads, libraries, sdc, verilog netlist path...
input conf file is /home/rakesh/vsd/vsdflow/outdir_spi_slave/spi_slave.prelayout.conf
output report file is /home/rakesh/vsd/vsdflow/outdir_spi_slave/spi_slave.prelayout.timing.rpt
Info: STA finished in 0sec seconds
Info: Refer to /home/rakesh/vsd/vsdflow/outdir_spi_slave/spi_slave.prelayout.timing.rpt for warnings and errors
Info: Pre-layout STA finished
Creating a backup of synthesis netlist
Place and Route step from qflow started
Place and Route step from qflow finished
Info: Post-layout STA started
Info: Timing Analysis Started....
Info: Initializing number of threads, libraries, sdc, verilog netlist path...
-------------- Below settings will ensure the correct behavior of vsdsynth -------------------
-----Please review below settings with VSD team or drop an email to kunalpghosh@gmail.com-----
Set your technology using variable "tech_name"
Setting technology to osu018
This is the place where all procs are located
Setting variable 'proc_dir' to procs
tcl_precision specifies the number of digits to generate when converting floating point values to strings
Setting variable 'tcl_precision' to 3
Set run_synthesis variable to '1' if you want to run synthesis. If you want to use the.prelayout.timing.rpt of previous runs. which is stored in outdir_, set this variable to '0' to skip synthesis and jump to STA
Setting variable 'run_synthesis' to 1
Set generate_sdc to '1' if you want to generate SDC from data given in excel sheet. If you already have sdc, save it in outdir_ as .sdc and set this variable to '0'
Setting variable 'generate_sdc' to 1
Set enable_prelayout_timing to '1' for running STA with zero-wire load parasitics. If you have generated spef, set this variable to '0'
Setting variable 'enable_prelayout_timing' to 1
Set do_STA to '1' if you want to run STA after synthesis. Else, set this variable to '0'
Setting variable 'do_STA' to 1
Set generate_report to '1' if you want to generate QOR of your design. Else, set this variable to '0'
Setting variable 'generate_report' to 0
If generate_report is '1', there are currently 2 kinds of reporting format we provide. If you need horizontal reporting, set generate_horizontal_report to '1'
Setting variable 'generate_horizontal_report' to 1
If generate_report is '1', there are currently 2 kinds of reporting format we provide. If you need vertical reporting, set generate_horizontal_report to '1'
Setting variable 'generate_vertical_report' to 1
If run_place_and_route is '1', it will run placement and routing
Setting variable 'run_place_and_route' to 1
Info: Setting Design Name as 'spi_slave'
Info: Setting Output Directory as 'outdir_spi_slave'
Info: Setting Netlist Directory as 'verilog'
Info: Setting Early Library Path as '/usr/local/share/qflow/tech/osu018/osu018_stdcells.lib'
Info: Setting Late Library Path as '/usr/local/share/qflow/tech/osu018/osu018_stdcells.lib'
Info: Setting Constraints File as 'spi_slave_design_constraints.csv'
Info: Below are the list of initial variables and their values. User can use these variables for further debug. Use 'puts ' command to query value of below variables
DesignName = spi_slave
OutputDirectory = /home/rakesh/vsd/vsdflow/outdir_spi_slave
NetlistDirectory = /home/rakesh/vsd/vsdflow/verilog
EarlyLibraryPath = /usr/local/share/qflow/tech/osu018/osu018_stdcells.lib
LateLibraryPath = /usr/local/share/qflow/tech/osu018/osu018_stdcells.lib
ConstraintsFile = /home/rakesh/vsd/vsdflow/spi_slave_design_constraints.csv
Info: Early cell library found in path /usr/local/share/qflow/tech/osu018/osu018_stdcells.lib
Info: Late cell library found in path /usr/local/share/qflow/tech/osu018/osu018_stdcells.lib
Info: Output directory found in path /home/rakesh/vsd/vsdflow/outdir_spi_slave
Info: RTL netlist directory found in path /home/rakesh/vsd/vsdflow/verilog
Info: Constraints file found in path /home/rakesh/vsd/vsdflow/spi_slave_design_constraints.csv
Info: Dumping SDC constraints for spi_slave
Info-SDC: Working on clock constraints.....
Info-SDC: Working on IO constraints.....
Info-SDC: Categorizing input ports as bits and bussed
Info-SDC: Working on IO constraints.....
Info-SDC: Categorizing output ports as bits and bussed
Info: SDC created. Please use constraints in path /home/rakesh/vsd/vsdflow/outdir_spi_slave/spi_slave.sdc
Starting synthesis using qflow
Synthesis finished without errors
Please review log file "/home/rakesh/vsd/vsdflow/outdir_spi_slave/log/synth.log" for errors/warnings
Info: Please find the synthesized netlist for spi_slave at below path. You can use this netlist for STA or PNR
/home/rakesh/vsd/vsdflow/outdir_spi_slave/synthesis/spi_slave_synth.rtlbb.v
Info: Pre-layout STA started
Info: Timing Analysis Started....
Info: Initializing number of threads, libraries, sdc, verilog netlist path...
Info: enable_prelayout_timing is 1. Enabling zero-wire load parasitics
Info: Timing Analysis Started....
Info: Initializing number of threads, libraries, sdc, verilog netlist path...
input conf file is /home/rakesh/vsd/vsdflow/outdir_spi_slave/spi_slave.prelayout.conf
output report file is /home/rakesh/vsd/vsdflow/outdir_spi_slave/spi_slave.prelayout.timing.rpt
Info: STA finished in 0sec seconds
Info: Refer to /home/rakesh/vsd/vsdflow/outdir_spi_slave/spi_slave.prelayout.timing.rpt for warnings and errors
Info: Pre-layout STA finished
Creating a backup of synthesis netlist
Place and Route step from qflow started
Place and Route step from qflow finished
Info: Post-layout STA started
Info: Timing Analysis Started....
Info: Initializing number of threads, libraries, sdc, verilog netlist path...