CZ-TAW1B compatible

[dimaregabriele]

I have the latest model, the CZ-TAW1B, does anyone know if it's compatible?

[MiG-41]

Do you have a pictures ? Best from PCB from booth sides...
Put some pendrive and press 3 buttons at the same time for 10s with changing led colors ?

[dimaregabriele]

A pendrive empty ?

[dimaregabriele]

@MiG-41

[MiG-41]

Looks identical to my board , so should be fine.
There is even PL2303 chip , but expected new PL23A3 like here: #26

Shoud be fine.

[dimaregabriele]

OK I try. What guide can I follow step by step? @MiG-41

[MiG-41]

Try with this: #26 (comment)

[dimaregabriele]

@MiG-41 do i just have to upload the two files on the usb stick? then it plugs into the CZ-TAW1b and I press the 3 buttons at the same time ?

[MiG-41]

Yes and no :)
You have to create also third file with configuration.

[dimaregabriele]

how should i rename the file? okay config.example ? what format should it have? @MiG-41

Readonly=true Device="/dev/ttyUSB0" Loghex=true ReadInterval=1 Aquarea2mqttCompatible=false Aquarea2mqttPumpID="" Mqtt_topic_base="panasonic_heat_pump/main" Mqtt_set_base="panasonic_heat_pump/commands" ForceRefreshTime=300 MqttServer="192.168.1.37" MqttPort="1883" MqttLogin="aa" MqttPass="aa" SleepAfterCommand=1 MqttClientID="GoHeishaMon-pub" MqttKeepalive=60 EnableCommand=true HAAutoDiscover=true

[MiG-41]

File should have name GoHeishaMonConfig.new
All you have in Readme on first page of that git: https://github.com/lsochanowski/GoHeishaMon
Section Install...

[dimaregabriele]

I connected via web to the ip address of the device and entered openwrt. now what should I do to view the data on home assistant? @MiG-41

[MiG-41]

Nothing...
First you should see topics in MQTT ( ou can use i.e. MQTT Explorer to check it).
In HA you have to make your own integration ,or use template like this: https://github.com/Egyras/HeishaMon/tree/master/Integrations/Home%20Assistant

[dimaregabriele]

i put the heishamon.yaml file, but i see all the sensors as "unknown" status.
How can I verify that MQTT is working?
In the configuration file I put MqttServer="192.168.1.37", where 192.168.1.37 is the ip address of my homeassistant. it's correct? @MiG-41

[MiG-41]

How can I verify that MQTT is working?

Answer already was -->

ou can use i.e. MQTT Explorer to check it

[dimaregabriele]

this is what i see on mqtt explorer. @MiG-41