MQTT don't start

[yugo000]

I installed GoHeishaMon on my CZ-TAW1 device but after installation white diode still light.
I have connection via http. Internet works. I connected to tx/rx ports and checked everything. USB works. I have copied config file to: /etc/gh/config.
But don't see any mqqt traffic.
Strange thing, but dropbear can't start automatically. I must start it manually /usr/sbin/dropbear.
I tried to start GoHeishaMon_MIPSUPX manually - don't work.
I checked 1.0.166 version and the latest.
Any ideas?

[yugo000]

Now I installed newest version.
But stil nothing.
top shows that process GoHeishaMon_MIPSUPX uses about 90% of cpu.
Don't see any trying of connection to my mqtt server.

[dimaregabriele]

same problem

[vytasmk]

Similar problem here with versions 1.0.191 and 1.0.194. Config file is not read from USB flash drive. GUI is accessed and looking at running processes /usr/bin/GoHeishaMon_MIPSUPX eats 100% CPU and 12% RAM.

I checked my board it has PL2303 USB to UART chip. PCB date looks like 22 week of 2022

[vytasmk]

OK I figured out that version mentioned in here and FW from mediafire link in that comment is working fine for me.