example Atom_TFCard program working but lots gpio_set_level(227) errors #87
Description
Describe the bug
When running the TFCard example with an M5Atom lite there are a lot of Errors in the logs, but it seems the program is working.
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 188777542, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0030,len:1344
load:0x40078000,len:13964
load:0x40080400,len:3600
entry 0x400805f0
E (209) gpio: gpio_set_level(227): GPIO output gpio_num error
E (214) gpio: gpio_set_level(227): GPIO output gpio_num error
E (220) gpio: gpio_set_level(227): GPIO output gpio_num error
E (224) gpio: gpio_set_level(227): GPIO output gpio_num error
E (231) gpio: gpio_set_level(227): GPIO output gpio_num error
E (235) gpio: gpio_set_level(227): GPIO output gpio_num error
E (241) gpio: gpio_set_level(227): GPIO output gpio_num error
E (246) gpio: gpio_set_level(227): GPIO output gpio_num error
E (252) gpio: gpio_set_level(227): GPIO output gpio_num error
SD Card Type: SDHC
SD Card Size: 14910MB
There is a topic on the forum on the subject without any solution/workaround
https://community.m5stack.com/topic/6187/example-atom_tfcard-program-working-but-lots-gpio_set_level-227-errors
To reproduce
Just run the example ATOM_TFCard.ino with the TFcard reader attached to the M5Atom
Expected behavior
No error in the logs on Serial interface
Screenshots
No response
Environment
- OS: Ubuntu 24.04
- IDE &IDE Version: Aduino IDE 2.3.3
Additional context
No response
Issue checklist
- I searched for previous reports in the issue tracker
- My report contains all necessary details