From 807d6f5ca188f03864b45b1e1c14eafdcd863569 Mon Sep 17 00:00:00 2001 From: "yurii.nakonechnyi" Date: Wed, 10 Apr 2024 13:08:55 +0300 Subject: [PATCH] Fixed broken link for UDP example: 'examples/linux' -> 'examples/c' --- en/mavgen_c/example_c_udp.md | 6 +++--- ko/examples/c_udp.md | 8 ++++---- ko/examples/example_c_udp.md | 8 ++++---- ko/mavgen_c/example_c_udp.md | 6 +++--- kr/examples/c_udp.md | 6 +++--- zh/examples/c_udp.md | 6 +++--- zh/examples/example_c_udp.md | 6 +++--- zh/mavgen_c/example_c_udp.md | 6 +++--- 8 files changed, 26 insertions(+), 26 deletions(-) diff --git a/en/mavgen_c/example_c_udp.md b/en/mavgen_c/example_c_udp.md index a85c2bdbc..f97c26c10 100644 --- a/en/mavgen_c/example_c_udp.md +++ b/en/mavgen_c/example_c_udp.md @@ -1,6 +1,6 @@ # MAVLink C UDP Example -The [MAVLink UDP Example](https://github.com/mavlink/mavlink/tree/master/examples/linux) is a simple C example that sends some data to _QGroundControl_ using MAVLink over UDP. +The [MAVLink UDP Example](https://github.com/mavlink/mavlink/tree/master/examples/c) is a simple C example that sends some data to _QGroundControl_ using MAVLink over UDP. _QGroundControl_ responds with heartbeats and other messages, which are then printed by this program. > **Note** The example should work on any Unix-like system (Linux, MacOS, BSD, etc.). @@ -27,7 +27,7 @@ The following instructions show how to build and run the example. > **Note** You can put/generate the library wherever you like, but the build command below assumes they are located in directory named **include** below the MAVLink root directory. -1. Open a terminal and navigate to [examples/linux](https://github.com/mavlink/mavlink/tree/master/examples/linux) +1. Open a terminal and navigate to [examples/c](https://github.com/mavlink/mavlink/tree/master/examples/c) 1. Compile with GCC using the following command: ```sh @@ -55,7 +55,7 @@ The following instructions show how to build and run the example. 1. The example should start displaying the received data in the terminal: ```sh - ~/github/mavlink/examples/linux$ ./mavlink_udp + ~/github/mavlink/examples/c$ ./mavlink_udp Bytes Received: 17 Datagram: fe 09 00 ff 00 00 00 00 00 00 06 08 c0 04 03 19 87 Received packet: SYS: 255, COMP: 0, LEN: 9, MSG ID: 0 diff --git a/ko/examples/c_udp.md b/ko/examples/c_udp.md index d60c1f022..e9248851d 100644 --- a/ko/examples/c_udp.md +++ b/ko/examples/c_udp.md @@ -1,6 +1,6 @@ # MAVLink C UDP Example -The [MAVLink UDP Example](https://github.com/mavlink/mavlink/tree/master/examples/linux) is a simple C example that sends some data to *QGroundControl* using MAVLink over UDP. *QGroundControl* responds with heartbeats and other messages, which are then printed by this program. +The [MAVLink UDP Example](https://github.com/mavlink/mavlink/tree/master/examples/c) is a simple C example that sends some data to *QGroundControl* using MAVLink over UDP. *QGroundControl* responds with heartbeats and other messages, which are then printed by this program. > **Note** The example should work on any Unix-like system (Linux, MacOS, BSD, etc.). These instructions were tested on a clean *Ubuntu LTS 16.04* installation using the default version of *gcc* (5.4.0). @@ -16,7 +16,7 @@ The following instructions show how to build and run the example. > **Note** You can put/generate the library wherever you like, but the build command below assumes they are located in directory named **include** below the MAVLink root directory. -2. Open a terminal and navigate to [examples/linux](https://github.com/mavlink/mavlink/tree/master/examples/linux) +2. Open a terminal and navigate to [examples/c](https://github.com/mavlink/mavlink/tree/master/examples/c) 3. Compile with GCC using the following command: @@ -42,7 +42,7 @@ The following instructions show how to build and run the example. 6. The example should start displaying the received data in the terminal: - ~/github/mavlink/examples/linux$ ./mavlink_udp + ~/github/mavlink/examples/c$ ./mavlink_udp Bytes Received: 17 Datagram: fe 09 00 ff 00 00 00 00 00 00 06 08 c0 04 03 19 87 Received packet: SYS: 255, COMP: 0, LEN: 9, MSG ID: 0 @@ -51,4 +51,4 @@ The following instructions show how to build and run the example. Datagram: fe 09 01 ff 00 00 00 00 00 00 06 08 c0 04 03 f3 f9 Received packet: SYS: 255, COMP: 0, LEN: 9, MSG ID: 0 - ... \ No newline at end of file + ... diff --git a/ko/examples/example_c_udp.md b/ko/examples/example_c_udp.md index d60c1f022..e9248851d 100644 --- a/ko/examples/example_c_udp.md +++ b/ko/examples/example_c_udp.md @@ -1,6 +1,6 @@ # MAVLink C UDP Example -The [MAVLink UDP Example](https://github.com/mavlink/mavlink/tree/master/examples/linux) is a simple C example that sends some data to *QGroundControl* using MAVLink over UDP. *QGroundControl* responds with heartbeats and other messages, which are then printed by this program. +The [MAVLink UDP Example](https://github.com/mavlink/mavlink/tree/master/examples/c) is a simple C example that sends some data to *QGroundControl* using MAVLink over UDP. *QGroundControl* responds with heartbeats and other messages, which are then printed by this program. > **Note** The example should work on any Unix-like system (Linux, MacOS, BSD, etc.). These instructions were tested on a clean *Ubuntu LTS 16.04* installation using the default version of *gcc* (5.4.0). @@ -16,7 +16,7 @@ The following instructions show how to build and run the example. > **Note** You can put/generate the library wherever you like, but the build command below assumes they are located in directory named **include** below the MAVLink root directory. -2. Open a terminal and navigate to [examples/linux](https://github.com/mavlink/mavlink/tree/master/examples/linux) +2. Open a terminal and navigate to [examples/c](https://github.com/mavlink/mavlink/tree/master/examples/c) 3. Compile with GCC using the following command: @@ -42,7 +42,7 @@ The following instructions show how to build and run the example. 6. The example should start displaying the received data in the terminal: - ~/github/mavlink/examples/linux$ ./mavlink_udp + ~/github/mavlink/examples/c$ ./mavlink_udp Bytes Received: 17 Datagram: fe 09 00 ff 00 00 00 00 00 00 06 08 c0 04 03 19 87 Received packet: SYS: 255, COMP: 0, LEN: 9, MSG ID: 0 @@ -51,4 +51,4 @@ The following instructions show how to build and run the example. Datagram: fe 09 01 ff 00 00 00 00 00 00 06 08 c0 04 03 f3 f9 Received packet: SYS: 255, COMP: 0, LEN: 9, MSG ID: 0 - ... \ No newline at end of file + ... diff --git a/ko/mavgen_c/example_c_udp.md b/ko/mavgen_c/example_c_udp.md index 02cd7f65b..d9c1cb627 100644 --- a/ko/mavgen_c/example_c_udp.md +++ b/ko/mavgen_c/example_c_udp.md @@ -1,6 +1,6 @@ # MAVLink C UDP Example -The [MAVLink UDP Example](https://github.com/mavlink/mavlink/tree/master/examples/linux) is a simple C example that sends some data to *QGroundControl* using MAVLink over UDP. *QGroundControl* responds with heartbeats and other messages, which are then printed by this program. +The [MAVLink UDP Example](https://github.com/mavlink/mavlink/tree/master/examples/c) is a simple C example that sends some data to *QGroundControl* using MAVLink over UDP. *QGroundControl* responds with heartbeats and other messages, which are then printed by this program. > **Note** The example should work on any Unix-like system (Linux, MacOS, BSD, etc.). These instructions were tested on a clean *Ubuntu LTS 20.04* installation using the default version of *gcc* (9.3.0). @@ -23,7 +23,7 @@ The following instructions show how to build and run the example. > **Note** You can put/generate the library wherever you like, but the build command below assumes they are located in directory named **include** below the MAVLink root directory. -1. Open a terminal and navigate to [examples/linux](https://github.com/mavlink/mavlink/tree/master/examples/linux) +1. Open a terminal and navigate to [examples/c](https://github.com/mavlink/mavlink/tree/master/examples/c) 1. Compile with GCC using the following command: ```bash gcc -std=c99 -I ../../include/common -o mavlink_udp mavlink_udp.c @@ -45,7 +45,7 @@ The following instructions show how to build and run the example. 1. The example should start displaying the received data in the terminal: ``` - ~/github/mavlink/examples/linux$ ./mavlink_udp + ~/github/mavlink/examples/c$ ./mavlink_udp Bytes Received: 17 Datagram: fe 09 00 ff 00 00 00 00 00 00 06 08 c0 04 03 19 87 Received packet: SYS: 255, COMP: 0, LEN: 9, MSG ID: 0 diff --git a/kr/examples/c_udp.md b/kr/examples/c_udp.md index a51658673..ebc4ef17c 100644 --- a/kr/examples/c_udp.md +++ b/kr/examples/c_udp.md @@ -1,6 +1,6 @@ # MAVLink C UDP Example -The [MAVLink UDP Example](https://github.com/mavlink/mavlink/tree/master/examples/linux) is a simple C example that sends some data to *QGroundControl* using MAVLink over UDP. +The [MAVLink UDP Example](https://github.com/mavlink/mavlink/tree/master/examples/c) is a simple C example that sends some data to *QGroundControl* using MAVLink over UDP. *QGroundControl* responds with heartbeats and other messages, which are then printed by this program. > **Note** The example should work on any Unix-like system (Linux, MacOS, BSD, etc.). @@ -17,7 +17,7 @@ The following instructions show how to build and run the example. > **Note** You can put/generate the library wherever you like, but the build command below assumes they are located in directory named **include** below the MAVLink root directory. -1. Open a terminal and navigate to [examples/linux](https://github.com/mavlink/mavlink/tree/master/examples/linux) +1. Open a terminal and navigate to [examples/c](https://github.com/mavlink/mavlink/tree/master/examples/c) 1. Compile with GCC using the following command: ```bash gcc -std=c99 -I ../../include/common -o mavlink_udp mavlink_udp.c @@ -40,7 +40,7 @@ The following instructions show how to build and run the example. 1. The example should start displaying the received data in the terminal: ``` - ~/github/mavlink/examples/linux$ ./mavlink_udp + ~/github/mavlink/examples/c$ ./mavlink_udp Bytes Received: 17 Datagram: fe 09 00 ff 00 00 00 00 00 00 06 08 c0 04 03 19 87 Received packet: SYS: 255, COMP: 0, LEN: 9, MSG ID: 0 diff --git a/zh/examples/c_udp.md b/zh/examples/c_udp.md index 3adfbc48c..e7b1b0843 100644 --- a/zh/examples/c_udp.md +++ b/zh/examples/c_udp.md @@ -16,7 +16,7 @@ > **注意** 您可以在您喜欢的地方放置/生成的库，但下面的建设命令假定它们位于 **包括** 在 MAVLink 根目录下。 -2. 打开终端并导航到 [实例/linux](https://github.com/mavlink/mavlink/tree/master/examples/linux) +2. 打开终端并导航到 [实例/c](https://github.com/mavlink/mavlink/tree/master/examples/c) 3. 使用下列命令编译GCC： @@ -42,7 +42,7 @@ 6. 例子应该开始显示终端收到的数据： - ~/github/mavlink/examples/linux$ ./mavlink_udp + ~/github/mavlink/examples/c$ ./mavlink_udp Bytes Received: 17 Datagram: fe 09 00 ff 00 00 00 00 00 00 06 08 c0 04 03 19 87 Received packet: SYS: 255, COMP: 0, LEN: 9, MSG ID: 0 @@ -51,4 +51,4 @@ Datagram: fe 09 01 ff 00 00 00 00 00 00 06 08 c0 04 03 f3 f9 Received packet: SYS: 255, COMP: 0, LEN: 9, MSG ID: 0 - ... \ No newline at end of file + ... diff --git a/zh/examples/example_c_udp.md b/zh/examples/example_c_udp.md index cb146c014..260d26cd7 100644 --- a/zh/examples/example_c_udp.md +++ b/zh/examples/example_c_udp.md @@ -16,7 +16,7 @@ > **注意** 您可以在您喜欢的地方放置/生成的库，但下面的建设命令假定它们位于 **包括** 在 MAVLink 根目录下。 -2. 打开终端并导航到 [实例/linux](https://github.com/mavlink/mavlink/tree/master/examples/linux) +2. 打开终端并导航到 [实例/c](https://github.com/mavlink/mavlink/tree/master/examples/c) 3. 使用下列命令编译GCC： @@ -42,7 +42,7 @@ 6. 例子应该开始显示终端收到的数据： - ~/github/mavlink/examples/linux$ ./mavlink_udp + ~/github/mavlink/examples/c$ ./mavlink_udp Bytes Received: 17 Datagram: fe 09 00 ff 00 00 00 00 00 00 06 08 c0 04 03 19 87 Received packet: SYS: 255, COMP: 0, LEN: 9, MSG ID: 0 @@ -51,4 +51,4 @@ Datagram: fe 09 01 ff 00 00 00 00 00 00 06 08 c0 04 03 f3 f9 Received packet: SYS: 255, COMP: 0, LEN: 9, MSG ID: 0 - ... \ No newline at end of file + ... diff --git a/zh/mavgen_c/example_c_udp.md b/zh/mavgen_c/example_c_udp.md index 02cd7f65b..d9c1cb627 100644 --- a/zh/mavgen_c/example_c_udp.md +++ b/zh/mavgen_c/example_c_udp.md @@ -1,6 +1,6 @@ # MAVLink C UDP Example -The [MAVLink UDP Example](https://github.com/mavlink/mavlink/tree/master/examples/linux) is a simple C example that sends some data to *QGroundControl* using MAVLink over UDP. *QGroundControl* responds with heartbeats and other messages, which are then printed by this program. +The [MAVLink UDP Example](https://github.com/mavlink/mavlink/tree/master/examples/c) is a simple C example that sends some data to *QGroundControl* using MAVLink over UDP. *QGroundControl* responds with heartbeats and other messages, which are then printed by this program. > **Note** The example should work on any Unix-like system (Linux, MacOS, BSD, etc.). These instructions were tested on a clean *Ubuntu LTS 20.04* installation using the default version of *gcc* (9.3.0). @@ -23,7 +23,7 @@ The following instructions show how to build and run the example. > **Note** You can put/generate the library wherever you like, but the build command below assumes they are located in directory named **include** below the MAVLink root directory. -1. Open a terminal and navigate to [examples/linux](https://github.com/mavlink/mavlink/tree/master/examples/linux) +1. Open a terminal and navigate to [examples/c](https://github.com/mavlink/mavlink/tree/master/examples/c) 1. Compile with GCC using the following command: ```bash gcc -std=c99 -I ../../include/common -o mavlink_udp mavlink_udp.c @@ -45,7 +45,7 @@ The following instructions show how to build and run the example. 1. The example should start displaying the received data in the terminal: ``` - ~/github/mavlink/examples/linux$ ./mavlink_udp + ~/github/mavlink/examples/c$ ./mavlink_udp Bytes Received: 17 Datagram: fe 09 00 ff 00 00 00 00 00 00 06 08 c0 04 03 19 87 Received packet: SYS: 255, COMP: 0, LEN: 9, MSG ID: 0