Spacing issue with PinSocket and PinHeader holes #10
Description
There's a strange issue when rendering pin holes for PinHeader and PinSocket footprints. (standard arduino headers)
It seems to add an additional, invisible hole every time a hole is drilled onto the board.
So rather than going 1, 2, 3, 4 -- it'll go 1, 3, 5, etc.
Must be some kind of maths problem. Here's where the bug manifests within the footprint, I just need to be able to locate the exact logic in the code:
(pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 4 thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 5 thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 6 thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 7 thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 8 thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
It gets the spacing right for the first two pads, but as soon as it loops through repeated hole shapes - it becomes an exponential pattern.