diff --git a/docs/developer/it-protocol/0x41-set-request/0x08-set-run-state.md b/docs/developer/it-protocol/0x41-set-request/0x08-set-run-state.md
index b5e8b41..b673402 100644
--- a/docs/developer/it-protocol/0x41-set-request/0x08-set-run-state.md
+++ b/docs/developer/it-protocol/0x41-set-request/0x08-set-run-state.md
@@ -11,12 +11,17 @@ Seems to correlate (at least partially) with [`0x62 0x09` - Get Run State][get-r
 | 5*   | (UNCONFIRMED) Power Saving Mode  | 0x00: Off<br/>0x0A: On                   |                    | Update flag 0x0800                                             |
 | 6**  | Airflow control mode (i-See)     | [Airflow control mode](#airflow-control-mode-i-see) |         | Update flag 0x2000<br/>Not all values supported for all units. |
 | 7*   | (UNCONFIRMED) Buzzer             | 0x00: No<br/>0x01: Yes                   |                    | Update flag 0x1000<br/>Sending 0x01 results in some units beeping twice |
-| 11*  | (UNCONFIRMED) Notification for remote control navigation | 0x02 : 0x00    |                    | Update flag 0x0002                                             |
+| 11*  | (UNCONFIRMED) Notification for remote control navigation | 0x02 : 0x00      |                    | Update flag 0x0002                                             |
+| 12   | Air Purifier                     | 0x00: Off<br/>0x01: On                   |                    | Update flag 0x0004                                             |
+| 13   | Night Mode                       | 0x00: Off<br/>0x01: On                   |                    | Update flag 0x0008                                             |
+| 14   | Circulator Mode***               | 0x00: Off<br/>0x01: On                   |                    | Update flag 0x0010                                             |
 
 **Extracted from Android app 霧ヶ峰REMOTE (v5.3.1)*
 
 ***Tested on MSZ-LN25VG2W*
 
+*****Might be same byte as the mode ECONO COOL? May be different functions on different units*
+
 [get-run-state]: ../0x62-get-response/0x09-get-run-state.md
 
 ### Airflow control mode (i-See)
diff --git a/docs/developer/it-protocol/0x62-get-response/0x42-unknown-hvac-options.md b/docs/developer/it-protocol/0x62-get-response/0x42-unknown-hvac-options.md
index 146d8df..665f028 100644
--- a/docs/developer/it-protocol/0x62-get-response/0x42-unknown-hvac-options.md
+++ b/docs/developer/it-protocol/0x62-get-response/0x42-unknown-hvac-options.md
@@ -4,7 +4,7 @@ These options are extracted from an MSZ-AY HVAC device.
 
 Returns the boolean whether the option is currently active or not.
 
-It cannot be set with the [`0x41` - Set Request](../0x41-set-request).
+Options can be set with the [`0x08` - Set Run State](../0x41-set-request/0x08-set-run-state.md) command.
 
 | Byte | Purpose           | Possible Values     | Notes                                    |
 |------|-------------------|---------------------|------------------------------------------|