Macro fails to run in weeklie build from 11/03/26

[BanceFC]

Mark, as per title, the macro simply fails to run in:-

OS: Manjaro Linux (XFCE/xfce/xcb)
Architecture: x86_64
Version: 1.2.0dev.20260311 (Git shallow) AppImage
Build date: 2026/03/11 07:18:44
Build type: Release
Branch: (HEAD detached at 03fc08d02)
Hash: 03fc08d02ebbafa0dc7268d8a7f89e17d3b4db87
Python 3.11.14, Qt 6.8.3, Coin 4.0.3, Vtk 9.3.1, boost 1_86, Eigen3 3.4.0, PySide 6.8.3
shiboken 6.8.3, xerces-c 3.3.0, IfcOpenShell 0.8.2, OCC 7.8.1
Locale: English/United Kingdom (en_GB)
Navigation Style/Orbit Style/Rotation Mode: CAD/Trackball/Drag at cursor
Stylesheet/Theme/QtStyle: unset/Classic/
Logical DPI/Physical DPI/Pixel Ratio: 96/91.9477/1
Installed mods:

• Curves workbench 0.6.71
• Fasteners Workbench 0.5.44
• freecad.gears workbench 1.3.0
• Vars 0.0.2.beta5
• Dodo 1.0.1
• A2plus 0.4.68
• Assembly4 0.60.4 (Disabled)
• Vars 0.0.2.beta2 (Disabled)
• SheetMetal Workbench 0.8.4
• Assembly4 0.60.6
• boltsfc 2022.11.5
• Addon Manager 2025.12.19 (Disabled)
• freecad.gears workbench 1.0.0
• SheetMetal Workbench 0.7.58 (Disabled)
• Curved Shapes 1.0.13 (Disabled)
• Fasteners Workbench 0.5.39 (Disabled)
• AirplaneDesign 0.4.1
• Silk workbench 0.2.0 (Disabled)
• Frame and beams workbench 0.1.1
• Curved Shapes 1.0.14
• A2plus 0.4.68 (Disabled)
• DynamicData 2.77.0
• freecad.gears workbench 1.3.0 (Disabled)
• KicadStepUp Workbench 11.8.2
• Plot 2025.10.29
• Addon Manager 2026.2.19
• Plot Workbench 2024.11.26 (Disabled)
• Nodes 0.1.36
• boltsfc 2022.11.5
• Curves workbench 0.6.70 (Disabled)
• Silk workbench 0.2.2
• Lattice2 Workbench 1.1.0
• FrameForge 0.1.7

Thanks for your attention.
Regards Steve.

[mwganson]

I am unable to reproduce the issue on this version:

OS: Windows 11 build 26200
Architecture: x86_64
Version: 1.2.0dev.20260318 (Git shallow)
Build date: 2026/03/18 23:42:42
Build type: Release
Branch: grafted,grafted
Hash: 7886ebae105b99f176cddbfc62a106ab06a6d021
Python 3.11.15, Qt 6.8.3, Coin 4.0.3, Vtk 9.3.1, boost 1_86, Eigen3 3.4.0, PySide 6.8.3
shiboken 6.8.3, xerces-c 3.3.0, IfcOpenShell 0.8.2, OCC 7.8.1
Locale: English/United States (en_US)
Navigation Style/Orbit Style/Rotation Mode: Blender/Trackball/Drag at cursor
Stylesheet/Theme/QtStyle: FreeCAD.qss/FreeCAD Light/
Logical DPI/Physical DPI/Pixel Ratio: 96/55.3896/1
Installed mods:

• Curved Shapes 1.0.14
• Curves workbench 0.6.71
• DynamicData 2.77.0
• Fasteners Workbench 0.5.44
• Lattice2 Workbench 1.1.0
• Mesh Remodel 1.11.0
• ThreadProfile 1.98.0
• ThreadProfile 1.98.0 (Disabled)

Have you been using the macro and now it stopped working? Try this test: In part workbench create a default cube. Select one face and run the macro, select mortise as the type of joint. If nothing happens try opening report view to see if there are any messages.

[BanceFC]

Today it runs, strange I did exactly the same thing yesterday or the day before, and no joy.
But today it runs. Sorry for the noise.