diff --git a/docs/kb/auditor/could_not_create_ssltls_secure_channel_error_in_windows_server_monitoring_plan.md b/docs/kb/auditor/could_not_create_ssltls_secure_channel_error_in_windows_server_monitoring_plan.md
index 51fc559c26..64b9233542 100644
--- a/docs/kb/auditor/could_not_create_ssltls_secure_channel_error_in_windows_server_monitoring_plan.md
+++ b/docs/kb/auditor/could_not_create_ssltls_secure_channel_error_in_windows_server_monitoring_plan.md
@@ -14,7 +14,6 @@ knowledge_article_id: kA04u000000wnpYCAQ
 products:
   - auditor
 ---
-
 # Could Not Create SSL/TLS Secure Channel Error in Windows Server Monitoring Plan
 
 ## Symptoms
@@ -35,7 +34,7 @@ products:
 
 ## Resolutions
 
-- Enable TLS 1.2 in your environment − refer to the following article for additional information: Connection Issue when TLS 1.2 Is Required.
+- Enable TLS 1.2 in your environment − refer to the following article for additional information: [Connection Issue when TLS 1.2 Is Required.](/docs/kb/auditor/сonnection_issue_when_tls_1.2_is_required.md)
 - In case TLS protocol versions are limited to specific versions in your environment, make sure to allow the operating system to select the protocol for incoming and outgoing communication. Refer to the following article for additional information: [Client and Server Cannot Communicate, Because They Do Not Possess a Common Algorithm](/docs/kb/auditor/client-and-server-cannot-communicate-because-they-do-not-possess-a-common-algorithm.md).
 - Review the certificate used for Windows Server auditing:
   1. In the Netwrix Auditor server, either press **Win + R** or launch the **Run** command window.
@@ -44,12 +43,12 @@ products:
   4. In the left **Available snap-ins** window, select **Certificates**, and click **Add >**.
 
      > **NOTE:** Once you add the **Certificates** snap-in, the following options should be selected in the prompted pop-up windows: **Computer account** > **Local computer** > **Finish** > **OK**.
-
+     >
   5. In the left pane, expand the **Certificates (Local Computer)** store, and proceed to **Netwrix Auditor for Windows Server** > **Certificates**.
   6. Review the certificate located in the **Certificates** folder. If expired (or multiple certificates are present), right-click the corresponding certificate and select **Delete**.
   7. Restart the server to reissue the certificate.
 
 ## Related Articles
 
-- Connection Issue when TLS 1.2 Is Required
-- [Client and Server Cannot Communicate, Because They Do Not Possess a Common Algorithm](/docs/kb/auditor/client-and-server-cannot-communicate-because-they-do-not-possess-a-common-algorithm.md)
\ No newline at end of file
+- [Connection Issue when TLS 1.2 Is Required](/docs/kb/auditor/сonnection_issue_when_tls_1.2_is_required.md)
+- [Client and Server Cannot Communicate, Because They Do Not Possess a Common Algorithm](/docs/kb/auditor/client-and-server-cannot-communicate-because-they-do-not-possess-a-common-algorithm.md)
diff --git a/static/files/auditor/Uninstall-NetwrixProduct.ps1 b/static/files/auditor/Uninstall-NetwrixProduct.ps1
new file mode 100644
index 0000000000..964bfe64a7
--- /dev/null
+++ b/static/files/auditor/Uninstall-NetwrixProduct.ps1
@@ -0,0 +1,589 @@
+<#	
+	.NOTES
+	===========================================================================
+	 Created with: 	SAPIEN Technologies, Inc., PowerShell Studio 2021 v5.8.187
+	 Created on:   	24/05/2022 16:48
+	 Created by:   	Joe Dibley
+	 Organization: 	Netwrix
+	 Filename:     	Uninstall-NetwrixProduct
+	===========================================================================
+	.DESCRIPTION
+		Uninstaller functions to remove software from multiple machines
+#>
+
+<#
+.DESCRIPTION
+	A generic uninstaller function to uninstall software below certain versions across multiple windows machines.	
+		
+.PARAMETER ComputerNames
+	Type: String Array
+	ParameterSetName: ComputerNames
+	A string array of computernames which you would like to uninstall software from
+
+.PARAMETER LDAPQuery
+	Type: String
+	ParameterSetName: LDAP (Default)
+	Default Value: "(&(ObjectClass=computer)(OperatingSystem=*Windows Server*))"
+	A LDAP query to query Active Directory for the computers to uninstall. This defaults to all Windows Servers.
+
+.PARAMETER CIDR
+	A CIDR string in the format of a.b.c.d/#. EG: 10.0.0.0/24
+
+	Type: String
+	ParamterSetName: CIDR
+	
+.PARAMETER ProductName
+	The name of the product to uninstall. This can be discovered using the Get-Package cmdlet.
+
+	Type: String
+	Mandatory: True
+	
+
+.PARAMETER VersionsBefore
+	Indicates the uninstall process to only remove versions before the specified version
+	If not indicated all versions will be removed.
+
+	Type: String
+	Mandatory: False
+
+.PARAMETER Quiet
+	Do not show the progress completion banner
+
+	Type: Switch
+	Mandatory: False
+
+.PARAMETER NoDNSResolution
+	Do not attempt to resolve IP Addresses to DNS Names
+
+	Type: Switch
+	Mandatory: False
+
+.PARAMETER DetectOnly
+	Do not uninstall, only detect the installation
+
+	Type: Switch
+	Mandatory: False
+
+.PARAMETER ProviderName
+	The provider to use for Get-Package. This can be helpful on systems with no internet access to stop them erroring.
+	When no provider is specified Get-Package will look at all package providers.
+
+	Type: String Array
+	Mandatory: False
+	Valid Options: "msi", "msu", "NuGet", "PowerShellGet", "Programs", "Bootstrap"
+	
+#>
+Function Uninstall-GenericProduct
+{
+	[CmdletBinding(DefaultParameterSetName = 'LDAP', SupportsShouldProcess = $true)]
+	param
+	(
+		[parameter(Mandatory = $True, ParameterSetName = "ComputerNames")]
+		[String[]]$ComputerNames,
+		[Parameter(Mandatory = $False, ParameterSetName = "LDAP")]
+		[String]$LDAPQuery = "(&(ObjectClass=computer)(OperatingSystem=*Windows Server*))",
+		[Parameter(Mandatory = $true, ParameterSetName = "CIDR", HelpMessage = 'Please enter a subnet in the form a.b.c.d/#')]
+		[string]$CIDR,
+		[Parameter(Mandatory = $true)]
+		[String]$ProductName,
+		[Parameter(Mandatory = $false)]
+		[System.Version]$VersionsBefore = "0.0",
+		[Parameter(Mandatory = $false)]
+		[switch]$Quiet,
+		[Parameter(Mandatory = $false)]
+		[switch]$NoDNSResolution,
+		[Parameter(Mandatory = $false)]
+		[switch]$DetectOnly,
+		[Parameter(Mandatory = $false)]
+		[ValidateNotNull()]
+		[ValidateSet("msi", "msu", "NuGet", "PowerShellGet", "Programs", "Bootstrap", IgnoreCase = $true)]
+		[string[]]$ProviderName
+	)
+	
+	BEGIN 
+	{
+		# Build Computer Lists based off parameters
+		if ($PSCmdlet.ParameterSetName -eq "LDAP")
+		{
+			Write-Verbose -Message "Enumerating computers from Active Directory with query: $LDAPQuery"
+			
+			#Building Native LDAP query with AdsiSearcher
+			$LDAP = [adsisearcher]$LDAPQuery
+			$LDAP.PropertiesToLoad.Add("Name") | Out-Null
+			$ComputerNames = $LDAP.FindAll().properties.name
+			
+			Write-Verbose -Message "Enumerated $($ComputerNames.Count) Computers from Active Directory"
+		}
+		elseif ($PSCmdlet.ParameterSetName -eq "CIDR")
+		{
+			if (Get-Command -Name Get-IpRange -CommandType Function -ErrorAction SilentlyContinue)
+			{
+				$ComputerNames = Get-IpRange -Subnets $CIDR
+				Write-Verbose -Message "$($ComputerNames.count) IP Addresses returned from CIDR range"
+			}
+			else
+			{
+				throw "CIDR range used but the Get-IPRange function has not been imported."
+			}
+		}
+		else
+		{
+			if ($ComputerNames.count)
+			{
+				Write-Verbose -Message "$($ComputerNames.Count) computers specified"
+			}
+			else
+			{
+				Write-Verbose -Message "1 computer specified"
+			}
+		}
+		
+		If (-Not $NoDNSResolution -and ($PSCmdlet.ParameterSetName -ne "LDAP"))
+		{
+			$ComputerNames = $ComputerNames | ForEach-Object {
+				$IPAddress = $_
+				if ($IPAddress -match '^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$')
+				{
+					Try
+					{
+						$DNSName = Resolve-DnsName $IPAddress -ErrorAction Stop -Verbose:$false | Select-Object -ExpandProperty NameHost
+						Write-Verbose -Message "$IPAddress resolved to $DNSName"
+						$DNSName
+					}
+					catch
+					{
+						Write-Verbose -Message "$IPAddress not resolved, IPAddress will be tried. Error: $($_.Exception.Message)"
+						$IPAddress
+					}
+				}
+				else
+				{
+					# Not an IP Address - Just keep it the same
+					Write-Verbose -Message "$IPAddress is not in an IPv4 format, it will be treated as a computer name"
+					$IPAddress
+				}
+			}
+		}
+	}
+	PROCESS
+	{
+		# Loop Through Each ComputerName to find computers which have it installed and remove it
+		$ComputerCounter = 0
+		foreach ($ComputerName in $ComputerNames)
+		{
+			if (-Not $Quiet)
+			{
+				Write-Progress -Activity "Uninstalling $ProductName from $($ComputerNames.Count) computers" -PercentComplete ($ComputerCounter*100/$ComputerNames.count) -Status "$ComputerName`: Testing Connection"
+			}
+			
+			Try
+			{
+				if (Test-Connection -Count 1 -Quiet -ComputerName $ComputerName)
+				{
+					if (-Not $Quiet)
+					{
+						Write-Progress -Activity "Uninstalling $ProductName from $($ComputerNames.Count) computers" -PercentComplete ($ComputerCounter * 100/$ComputerNames.count) -Status "$ComputerName`: Running Uninstallation Process"
+					}
+					
+					Invoke-Command -ErrorAction Stop -ComputerName $ComputerName -ArgumentList $ProductName, $VersionsBefore, $providerName, $DetectOnly -ScriptBlock {
+						[System.String] $ProductName = $args[0]
+						[System.Version]$VersionsBefore = $args[1]
+						[System.String]$providerName = $args[2]
+						[boolean]$DetectOnly = $args[3]
+						
+						# Define the registry path for the install path
+						$InstallPathRegKey = "HKLM:\SOFTWARE\Wow6432Node\Netwrix\User Activity Video Reporter Agent"
+						$InstallPathRegValue = "InstallPath"
+
+						# Define the ProgramData path
+						$ProgramDataPath = Join-Path $ENV:ProgramData "Netwrix Auditor\User Activity Core Service"
+
+						# Function to remove a directory and handle errors
+						function Remove-DirectoryWithHandling {
+							param(
+								[string]$Path
+							)
+							try {
+								if (Test-Path -Path $Path) {
+									Remove-Item -Path $Path -Recurse -Force -ErrorAction Stop
+									Write-Verbose "Removed directory: $Path"
+									$Global:RemovedArtifacts += "$Path;"
+								} else {
+									Write-Verbose "Directory not found: $Path"
+								}
+							}
+							catch {
+								Write-Warning "Error removing directory $Path`: $($_.Exception.Message)"
+							}
+						}
+
+						# Check that Get-Package Exists
+						$PackageCommandExists = Get-Command -Name Get-Package -Module PackageManagement -ErrorAction SilentlyContinue
+						if ($PackageCommandExists)
+						{
+							
+							# Build Get-Package Parameters
+							$Params = @{
+								Name	    = $ProductName
+								AllVersions = $True
+								ErrorAction = "SilentlyContinue"
+							}
+							
+							if ($providerName)
+							{
+								$Params.Add("ProviderName", $providerName)
+							}
+							
+							$Package = Get-Package @Params
+							
+							if ($VersionsBefore -ne [System.Version] "0.0")
+							{
+								$Package = $Package | Where-Object { [System.Version]$_.Version -lt $VersionsBefore }
+							}
+							
+							if ($Package -and -not $DetectOnly)
+							{
+								Write-Verbose -Message "$ENV:COMPUTERNAME`: $ProductName detected with version $($Package.Version)`tUninstalling..."
+								$Uninstall = $Package | Uninstall-Package -Force -ErrorAction Stop
+								Write-Verbose -Message "$ENV:COMPUTERNAME`: $ProductName detected with version $($Package.Version)`tRemoving aritacts"
+								# 1. Remove the program files folder
+								try {
+									$InstallPath = Get-ItemPropertyValue -Path $InstallPathRegKey -Name $InstallPathRegValue
+									if ($InstallPath) {
+										Remove-DirectoryWithHandling -Path $InstallPath
+									} else {
+										Write-Warning "InstallPath registry value not found."
+									}
+								}
+								catch {
+									Write-Warning "Error reading InstallPath from registry: $($_.Exception.Message)"
+								}
+
+								# 2. Remove the ProgramData directory
+								Remove-DirectoryWithHandling -Path $ProgramDataPath
+
+								# 3. Remove the registry key and all subkeys
+								try {
+									if (Test-Path -Path $InstallPathRegKey) {
+										Remove-Item -Path $InstallPathRegKey -Recurse -Force -ErrorAction Stop
+										Write-Verbose "Removed registry key: $InstallPathRegKey"
+										$Global:RemovedArtifacts += "$InstallPathRegKey;"
+									} else {
+										Write-Verbose "Registry key not found: $InstallPathRegKey"
+									}
+								}
+								catch {
+									Write-Warning "Error removing registry key: $($_.Exception.Message)"
+								}
+
+								# Outputing Status and Error. Error is for if Invoke Command does not run
+								$Obj = New-Object -TypeName System.Management.Automation.PSObject
+								$Obj | Add-Member -MemberType NoteProperty -Name Status -Value $Uninstall.Status
+								$Obj | Add-Member -MemberType NoteProperty -Name Version -Value $Uninstall.Version
+								$Obj | Add-Member -MemberType NoteProperty -Name ArtifactsRemoved -Value ($RemovedArtifacts.Trim(";"))
+								$Obj | Add-Member -MemberType NoteProperty -Name Error -Value "N/A"
+								$Obj
+							}
+							elseif ($Package -and $DetectOnly)
+							{
+								$Obj = New-Object -TypeName System.Management.Automation.PSObject
+								$Obj | Add-Member -MemberType NoteProperty -Name Status -Value "Product Detected"
+								$Obj | Add-Member -MemberType NoteProperty -Name Version -Value $Package.Version
+								$Obj | Add-Member -MemberType NoteProperty -Name ArtifactsRemoved -Value "N/A"
+								$Obj | Add-Member -MemberType NoteProperty -Name Error -Value "N/A"
+								$Obj
+							}
+							else
+							{
+								# Product Not Detected 
+								# Outputting Status and Error. Error is for if Invoke Command does not run
+								$Obj = New-Object -TypeName System.Management.Automation.PSObject
+								$Obj | Add-Member -MemberType NoteProperty -Name Status -Value "Product Not Installed"
+								$Obj | Add-Member -MemberType NoteProperty -Name Version -Value "N/A"
+								$Obj | Add-Member -MemberType NoteProperty -Name ArtifactsRemoved -Value "N/A"
+								$Obj | Add-Member -MemberType NoteProperty -Name Error -Value "N/A"
+								$Obj
+							}
+						}
+						else
+						{
+							# Get-Package not detected
+							# Outputting Status and Error. Error is for if Invoke Command does not run
+							$Obj = New-Object -TypeName System.Management.Automation.PSObject
+							$Obj | Add-Member -MemberType NoteProperty -Name Status -Value "Command Not Found"
+							$Obj | Add-Member -MemberType NoteProperty -Name Version -Value "N/A"
+							$Obj | Add-Member -MemberType NoteProperty -Name ArtifactsRemoved -Value "N/A"
+							$Obj | Add-Member -MemberType NoteProperty -Name Error -Value "The Get-Package Command was not found. This can indicate that you are on a PowerShell version lower than 5.1."
+							$Obj
+						}
+					}
+				}
+				else
+				{
+					$Obj = New-Object -TypeName System.Management.Automation.PSObject
+					$Obj | Add-Member -MemberType NoteProperty -Name Status -Value "Computer Offline"
+					$Obj | Add-Member -MemberType NoteProperty -Name Version -Value "N/A"
+					$Obj | Add-Member -MemberType NoteProperty -Name ArtifactsRemoved -Value "N/A"
+					$Obj | Add-Member -MemberType NoteProperty -Name Error -Value "N/A"
+					$Obj | Add-Member -MemberType NoteProperty -Name PSComputerName -Value "$ComputerName"
+					$Obj | Add-Member -MemberType NoteProperty -Name RunspaceId -Value ""
+					$Obj
+				}
+			}
+			catch
+			{
+				$Obj = New-Object -TypeName System.Management.Automation.PSObject
+				$Obj | Add-Member -MemberType NoteProperty -Name Status -Value "Unable to connect"
+				$Obj | Add-Member -MemberType NoteProperty -Name Version -Value "N/A"
+				$Obj | Add-Member -MemberType NoteProperty -Name ArtifactsRemoved -Value "N/A"
+				$Obj | Add-Member -MemberType NoteProperty -Name Error -Value "$($_.Exception.Message)"
+				$Obj | Add-Member -MemberType NoteProperty -Name PSComputerName -Value "$ComputerName"
+				$Obj | Add-Member -MemberType NoteProperty -Name RunspaceId -Value ""
+				$Obj
+			}
+			
+			#Increment Counter for Write-Progress output
+			$ComputerCounter++
+		}
+	}
+	END
+	{
+		# No ending statements required.
+	}
+}
+
+
+# This function has been taken from PoshFunctions PowerShell Module https://github.com/riedyw/PoshFunctions
+function Get-IpRange
+{
+<#
+.SYNOPSIS
+    Given a subnet in CIDR format, get all of the valid IP addresses in that range.
+.DESCRIPTION
+    Given a subnet in CIDR format, get all of the valid IP addresses in that range.
+.PARAMETER Subnets
+    The subnet written in CIDR format 'a.b.c.d/#' and an example would be '192.168.1.24/27'. Can be a single value, an
+    array of values, or values can be taken from the pipeline.
+.EXAMPLE
+    Get-IpRange -Subnets '192.168.1.24/30'
+ 
+    192.168.1.25
+    192.168.1.26
+.EXAMPLE
+    (Get-IpRange -Subnets '10.100.10.0/24').count
+ 
+    254
+.EXAMPLE
+    '192.168.1.128/30' | Get-IpRange
+ 
+    192.168.1.129
+    192.168.1.130
+.NOTES
+    Inspired by https://gallery.technet.microsoft.com/PowerShell-Subnet-db45ec74
+ 
+    * Added comment help
+#>
+	
+	[CmdletBinding(ConfirmImpact = 'None')]
+	Param (
+		[Parameter(Mandatory, HelpMessage = 'Please enter a subnet in the form a.b.c.d/#', ValueFromPipeline, Position = 0)]
+		[string[]]$Subnets
+	)
+	
+	begin
+	{
+		Write-Verbose -Message "Starting [$($MyInvocation.Mycommand)]"
+	}
+	
+	process
+	{
+		foreach ($subnet in $subnets)
+		{
+			if ($subnet -match '^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/\d{1,2}$')
+			{
+				#Split IP and subnet
+				$IP = ($Subnet -split '\/')[0]
+				[int]$SubnetBits = ($Subnet -split '\/')[1]
+				if ($SubnetBits -lt 7 -or $SubnetBits -gt 30)
+				{
+					Write-Error -Message 'The number following the / must be between 7 and 30'
+					break
+				}
+				#Convert IP into binary
+				#Split IP into different octects and for each one, figure out the binary with leading zeros and add to the total
+				$Octets = $IP -split '\.'
+				$IPInBinary = @()
+				foreach ($Octet in $Octets)
+				{
+					#convert to binary
+					$OctetInBinary = [convert]::ToString($Octet, 2)
+					#get length of binary string add leading zeros to make octet
+					$OctetInBinary = ('0' * (8 - ($OctetInBinary).Length) + $OctetInBinary)
+					$IPInBinary = $IPInBinary + $OctetInBinary
+				}
+				$IPInBinary = $IPInBinary -join ''
+				#Get network ID by subtracting subnet mask
+				$HostBits = 32 - $SubnetBits
+				$NetworkIDInBinary = $IPInBinary.Substring(0, $SubnetBits)
+				#Get host ID and get the first host ID by converting all 1s into 0s
+				$HostIDInBinary = $IPInBinary.Substring($SubnetBits, $HostBits)
+				$HostIDInBinary = $HostIDInBinary -replace '1', '0'
+				#Work out all the host IDs in that subnet by cycling through $i from 1 up to max $HostIDInBinary (i.e. 1s stringed up to $HostBits)
+				#Work out max $HostIDInBinary
+				$imax = [convert]::ToInt32(('1' * $HostBits), 2) - 1
+				$IPs = @()
+				#Next ID is first network ID converted to decimal plus $i then converted to binary
+				For ($i = 1; $i -le $imax; $i++)
+				{
+					#Convert to decimal and add $i
+					$NextHostIDInDecimal = ([convert]::ToInt32($HostIDInBinary, 2) + $i)
+					#Convert back to binary
+					$NextHostIDInBinary = [convert]::ToString($NextHostIDInDecimal, 2)
+					#Add leading zeros
+					#Number of zeros to add
+					$NoOfZerosToAdd = $HostIDInBinary.Length - $NextHostIDInBinary.Length
+					$NextHostIDInBinary = ('0' * $NoOfZerosToAdd) + $NextHostIDInBinary
+					#Work out next IP
+					#Add networkID to hostID
+					$NextIPInBinary = $NetworkIDInBinary + $NextHostIDInBinary
+					#Split into octets and separate by . then join
+					$IP = @()
+					For ($x = 1; $x -le 4; $x++)
+					{
+						#Work out start character position
+						$StartCharNumber = ($x - 1) * 8
+						#Get octet in binary
+						$IPOctetInBinary = $NextIPInBinary.Substring($StartCharNumber, 8)
+						#Convert octet into decimal
+						$IPOctetInDecimal = [convert]::ToInt32($IPOctetInBinary, 2)
+						#Add octet to IP
+						$IP += $IPOctetInDecimal
+					}
+					#Separate by .
+					$IP = $IP -join '.'
+					$IPs += $IP
+				}
+				Write-Output -InputObject $IPs
+			}
+			else
+			{
+				Write-Error -Message "Subnet [$subnet] is not in a valid format"
+			}
+		}
+	}
+	
+	end
+	{
+		Write-Verbose -Message "Ending [$($MyInvocation.Mycommand)]"
+	}
+}
+
+
+function Uninstall-ADV2022003UAVRAgents
+{
+	[CmdletBinding(DefaultParameterSetName = 'LDAP')]
+	param
+	(
+		[parameter(Mandatory = $true, ParameterSetName = "ComputerNames")]
+		[String[]]$ComputerNames,
+		[Parameter(Mandatory = $False, ParameterSetName = "LDAP")]
+		[String]$LDAPQuery = "(&(ObjectClass=computer)(OperatingSystem=*Windows Server*))",
+		[Parameter(Mandatory = $true, ParameterSetName = "CIDR", HelpMessage = 'Please enter a subnet in the form a.b.c.d/#')]
+		[string]$CIDR,
+		[Parameter(Mandatory = $false)]
+		[switch]$Quiet,
+		[Parameter(Mandatory = $false)]
+		[switch]$NoDNSResolution,
+		[Parameter(Mandatory = $false)]
+		[switch]$DetectOnly,
+		[Parameter(Mandatory = $false)]
+		[ValidateSet("msi", "msu", "NuGet", "PowerShellGet", "Programs", "Bootstrap", IgnoreCase = $true)]
+		[string[]]$ProviderName = "msi"
+	)
+	
+	# Hardcoded Names and Versions
+	[String]$ProductName = "Netwrix Auditor User Activity Core Service"
+	[System.Version]$VersionsBefore = "10.5"
+	
+	$Params = @{
+		Quiet = $Quiet
+		NoDNSResolution = $NoDNSResolution
+		ProductName	    = $ProductName
+		VersionsBefore  = $VersionsBefore
+		DetectOnly	    = $DetectOnly
+	}
+	
+	if ($ProviderName)
+	{
+		$Params.Add("ProviderName", $ProviderName)
+	}
+	
+	switch ($PSCmdlet.ParameterSetName) {
+		"LDAP" {
+			$Params.Add("LDAPQuery", $LDAPQuery)
+		}
+		"ComputerNames" {
+			$Params.Add("ComputerNames", $ComputerNames)
+		}
+		"CIDR" {
+			$Params.Add("CIDR", $CIDR)
+		}
+	}
+	
+	Uninstall-GenericProduct @Params
+}
+
+Function Uninstall-UAVRAgents
+{
+	[CmdletBinding(DefaultParameterSetName = 'LDAP')]
+	param
+	(
+		[parameter(Mandatory = $true, ParameterSetName = "ComputerNames")]
+		[String[]]$ComputerNames,
+		[Parameter(Mandatory = $False, ParameterSetName = "LDAP")]
+		[String]$LDAPQuery = "(&(ObjectClass=computer)(OperatingSystem=*Windows Server*))",
+		[Parameter(Mandatory = $true, ParameterSetName = "CIDR", HelpMessage = 'Please enter a subnet in the form a.b.c.d/#')]
+		[string]$CIDR,
+		[Parameter(Mandatory = $false)]
+		[switch]$Quiet,
+		[Parameter(Mandatory = $false)]
+		[switch]$NoDNSResolution,
+		[Parameter(Mandatory = $false)]
+		[switch]$DetectOnly,
+		[Parameter(Mandatory = $false)]
+		[ValidateSet("msi", "msu", "NuGet", "PowerShellGet", "Programs", "Bootstrap", IgnoreCase = $true)]
+		[string[]]$ProviderName = "msi"
+	)
+	
+	#Hardcoded Names and Versions
+	[String]$ProductName = "Netwrix Auditor User Activity Core Service"
+	[System.Version]$VersionsBefore = "0.0" # All Versions
+	
+	$Params = @{
+		Quiet				  = $Quiet
+		NoDNSResolution	      = $NoDNSResolution
+		ProductName		      = $ProductName
+		VersionsBefore  = $VersionsBefore
+		DetectOnly = $DetectOnly
+	}
+	
+	if ($ProviderName)
+	{
+		$Params.Add("ProviderName", $ProviderName)
+	}
+	
+	switch ($PSCmdlet.ParameterSetName)
+	{
+		"LDAP" {
+			$Params.Add("LDAPQuery", $LDAPQuery)
+		}
+		"ComputerNames" {
+			$Params.Add("ComputerNames", $ComputerNames)
+		}
+		"CIDR" {
+			$Params.Add("CIDR", $CIDR)
+		}
+	}
+	
+	Uninstall-GenericProduct @Params
+}
\ No newline at end of file